オリエンタルモーター Product Lineup

This is a mechanical brake motor equipped with a non-excited electromagnetic brake. It can stop the motor shaft simultaneously with a power outage or when the power is turned off. It is ideal for applications that require load holding, such as vertical drives.

• AC Motor

This is a 30-minute rated motor that can instantly switch the rotation direction. It has a built-in simple brake at the rear, making it ideal for applications that frequently require forward and reverse operation.

• AC Motor

Brushless motors utilize PM motors that employ permanent magnets in the rotor. When combined with an inverter, they enable speed control ranging from 300 to 4000 r/min. Compared to three-phase AC motors, they are smaller and lighter, reducing the burden on assembly workers. Furthermore, they achieve an efficiency level of IE5, contributing to reductions in electricity costs and CO2 emissions. *Note: The range varies depending on the inverter used.*

• PM motor

A brushless motor that pursues high output and compact size. It supports the development of more compact battery-powered devices.

• Brushless DC Motor

The compact and slim motor and driver are equipped with enhanced performance and features.

• Brushless DC Motor

The BLE2 series includes motors with electromagnetic brakes and dustproof/waterproof specifications, as well as a variety of other lineups. This allows for even broader applications.

• PM motor

An easily adjustable speed control dial. Once the motor and driver are connected, all you need to do is turn on the switch for simple wiring. The motor features a compact, high-output, and high-efficiency new brushless motor. The BMU series, focused on user-friendliness and affordability, offers a variety of lineups including dustproof and waterproof motors. It can be used for a wider range of applications.

• PM motor

Would you consider a product that lowers running costs compared to AC motors and is easy to replace? The BLS series is a compact, user-friendly "eco motor" that fulfills your desire for simplicity!

• Brushless DC Motor

We support the early development of customer equipment through stable product supply, convenient features that enable quick launches, and various support systems. Our uniquely developed control technology and the latest algorithms, cultivated over many years in this industry, meet a wide range of needs from high-speed work transport to precise positioning.

• Servo motor

The full digital control with full-time micro-stepping drive significantly improves vibration levels and achieves low vibration across the entire speed range. It is a compact and lightweight driver that contributes to space-saving. The 2-phase and 5-phase drivers share the same size, mounting, I/O, and power connectors. You can choose between two types according to your upper system: "Pulse Train Input Type" and "RS-485 Communication Type."

• Stepping motor

A hollow rotary table and motor integrated product that can directly attach large inertia disks, arms, and more. It reduces the effort and cost of mechanism design, parts procurement, and assembly adjustments.

• Actuator

We have added a three-finger type to the EH series of electric grippers. It achieves a gentle "grip" like a human fingertip, even for delicate work with cylindrical, spherical, or complex shapes.

• Actuator

The rack and pinion system is a product that combines a rack and pinion mechanism with a motor. By using the αSTEP AZ series for the motor section, it enables high-precision positioning as well as the transportation of heavy loads up to 200 kg. It contributes to the compactness of the equipment and the labor-saving of production work.

• Actuator

The rack and pinion system is a product that combines a rack and pinion mechanism with a motor. By using the αSTEP AZ series for the motor section, it enables high-precision positioning as well as the transport of heavy loads of up to 100 kg. It contributes to the compactness of the equipment and the labor-saving of production work.

• Actuator

By integrating the hollow rotor and ball screw nut without using coupling or other connecting components, we suppress the influence of component rigidity and backlash due to combinations. Additionally, with a compact body, it contributes to the miniaturization and space-saving of the device. The reduction in weight at the tip of the device is expected to enhance design flexibility.

• Actuator
• cylinder

By integrating the hollow rotor and ball screw nut without using coupling or connecting parts, the influence of component rigidity and backlash from combinations is minimized. Additionally, the compact body contributes to the miniaturization and space-saving of the device. The reduction in weight at the tip of the device is expected to enhance design flexibility.

• Actuator
• cylinder

Since the motor, frame, guide rails, guide blocks, ball screws, and other components have been selected and assembled, it is possible to shorten the customer's design time and equipment startup time. Additionally, the AZ series, which performs unique hybrid control, is equipped as the drive motor, achieving both ease of use and reliability.

• Actuator
• cylinder

Since the motor, frame, guide rails, guide blocks, ball screws, etc. have been selected and assembled, it is possible to shorten the customer's design time and equipment startup time. Additionally, we have equipped the AZ series, which performs unique hybrid control, as the drive motor, achieving both ease of use and reliability. We also offer products that maintain the functionality and performance of the EZS series while being compatible with clean room environments.

• Actuator

We offer a wide range of products based on mounting angle dimensions, voltage input, and compatible vacuum levels. To minimize gas generation, the motor surface is not painted, and vacuum grease is used for the bearings. The main residual gases are the same as those found in a typical clean environment, so you can use it without worrying about contamination in the vacuum chamber.

• Stepping motor

αSTEP is a stepping motor-based motor that performs unique control by hybridizing the advantages of "open-loop control" and "closed-loop control." It continuously monitors the motor's position using a rotor position detection sensor and automatically switches between the two controls depending on the situation.

• Stepping motor

It is a multi-axis driver that can connect motors with DC power input from the AZ series and the electric actuators that are equipped with them. We have products available that support major industrial networks.

• Amplifier

We have prepared an option called mini driver for the αSTEP AZ series. It also supports battery operation, allowing for even more diverse applications than before.

• Amplifier

The αSTEP AZ series is a positioning motor that can be used with the same feel as stepping motors and servo motors. Based on stepping motors, it uniquely combines the advantages of both stepping motors and servo motors by hybridizing open-loop control and closed-loop control. It is equipped with a battery-less absolute encoder.

• Stepping motor

【2-Phase Stepper Motor】 Basic step angle 1.8° (200 divisions per revolution) - High torque - Low vibration 【5-Phase Stepper Motor】 Basic step angle 0.72° (500 divisions per revolution) - High precision - Low vibration - Low noise 【Features (2-Phase Stepper Motor)】 ■ Torque increase from low to high speeds ■ Compact and slim connectors adopted ■ Further reduced vibration 【Features (5-Phase Stepper Motor)】 ■ High precision positioning possible ■ Low vibration, low noise ■ Compact and slim connectors adopted *For more details, please refer to the PDF document or feel free to contact us.

• Stepping motor

The "US2 Series" is an AC speed control motor equipped with a digital display panel and a setting dial, making it easy to operate. It controls the motor by constantly checking the rotational speed with a rate generator mounted on the AV motor, ensuring that the set speed is maintained even when the load fluctuates. Additionally, the digitization of the control circuit has improved the speed variation rate from -5% to ±1%. Furthermore, the motor and speed controller used in this product generate very little self-noise. As a result, fewer noise-reducing peripheral devices are needed, achieving reduced installation effort and costs, as well as saving space. 【Features】 ■ Easy operation ■ Simple wiring ■ Speed control with closed-loop control ■ High reliability ■ High torque tolerance and high-strength gear head *For more details, please refer to the PDF materials or feel free to contact us.

• AC Motor
• controller

Induction motors are ideal for applications that require continuous operation in one direction. We also offer three-phase high-efficiency motors with optimal characteristics for speed control using inverters, enabling energy savings.

• AC Motor

The "DSC Series" is an AC speed control motor equipped with a rate generator that constantly monitors the rotational speed and controls the speed to maintain the set value even when the load fluctuates. It allows for the setting of four operating data points, which can be switched during operation via I/O, and is equipped with rich features such as slow start, slow down, and limitations on the rotational speed range. Additionally, it adopts a gear head with excellent allowable torque and strength, enhances case rigidity with unique side plates, and improves gear strength through heat treatment (carburizing hardening). 【Features】 ■ Speed control with closed-loop control ■ Space-saving design and reduced installation effort ■ Comprehensive functionality in a compact body ■ High allowable torque and high-strength gear head ■ High reliability *For more details, please refer to the PDF materials or feel free to contact us.

• AC Motor
• controller