奥村機械製作所 List of Products and Services

The "NRK-M Type" is a fully automatic housing component groove processing machine designed for heavy cutting. With a powerful motor mounted on top and a belt drive system, the processing capability is enhanced, allowing for rapid heavy cutting. The tool axis travel guide uses LM guides to maintain precision over a long period. The front and rear travel of the tool axis is stabilized through ball screw feeding or air-hydraulic methods for consistent cutting operations. 【Features】 ■ Rapid heavy cutting capabilities ■ Processing cycle time is shortened due to the tool jump mechanism ■ Easy operation for anyone through a uniquely developed dedicated operation screen ■ Accurate positioning without cumulative errors 【Other Features】 ■ The positioning operation screen comes standard with a large touch panel ■ By inputting the table feed pitch and cutting count in sequence using the numeric keypad, the table moves and cutting is performed in that order ■ The motor for table movement uses a servo motor ■ Three-speed shifting is possible: high, medium, and low ■ Table movement dimension measurement is conducted using a magnetic scale, allowing for measurements in 0.1mm increments, maintaining accuracy semi-permanently.

The "UCRA-300J model" automates the groove cutting process for housing materials, rafters, and ventilation battens. It securely clamps the rear end of the material and achieves high-speed, precise groove processing. The operation is simple and excels in safety.

"ORCH3S Series" - The culmination of years of experience and technology in radial saw manufacturing. ■ Simultaneous groove processing and cross-cutting of partition panel materials from top to bottom. ■ Achieves both "high-speed feeding" and "high-precision positioning" - High-speed positioning of the upper and lower cutter axes and feeding axis using servo motors. ■ Stable clamping to accommodate materials with "bends" Four upper clamps and four side clamps. ■ Material length Min 300mm ~ Max 4000mm, thickness 120mm, maximum groove depth 50mm. ■ Data input, office-created computer software + USB data transfer (optional). ■ After processing, a product discharge device can be installed (optional).

Years of achievements and technology in radial saw manufacturing ■ Groove processing and cross-cutting of partition panel materials are performed in one pass ■ Achieving both "high-speed material feeding" and "high-precision positioning" - High-speed positioning of the cutter shaft groove depth and material feeding device using a servo motor ■ Stable clamping to accommodate "curved" materials Four upper clamps and four side clamps ■ Material length Min 300mm ~ Max 4000mm, thickness 120mm, maximum groove depth 50mm ■ Data input, office-created computer software + USB data transfer (optional) ■ After processing, a product discharge device can be installed (optional)

"ORCH2S Series" - The culmination of years of experience and technology in radial saw manufacturing. ■ It is possible to process partition panels and groove processing of the body frame simultaneously from above and below. ■ Achieves both "high-speed material feeding" and "high-precision positioning." - High-speed positioning of the upper and lower cutter shafts and feeding axis using servo motors. ■ Stable clamping to accommodate materials with "curvature." Four upper clamps and four side clamps. ■ Material length Min 300mm ~ Max 4000mm, thickness 120mm, maximum groove depth 50mm. ■ Data input, office-created computer software + USB data transfer (optional). ■ After processing, a product discharge device can be installed (optional). Additionally, a three-axis radial saw "ORCH3S" with an added cutting axis is also available.

The "NRK-M600J Modified Model" features ventilated body processing. With a powerful motor mounted on top and a belt drive system, the processing capability has increased, allowing for rapid heavy cutting. The tool axis travel guide uses LM guides to maintain precision over long periods. The front and rear travel of the tool axis is stabilized through either ball screw feed or air-hydraulic methods for consistent cutting operations. 【Features】 ■ Rapid heavy cutting capability ■ Processing cycle time is reduced due to the tool jump mechanism ■ An exclusively developed dedicated operation screen allows anyone to operate it easily ■ Accurate positioning without cumulative error 【Other Features】 ■ The positioning operation screen comes standard with a large touch panel ■ By inputting the table feed pitch and cutting count in sequence using the numeric keypad, the table moves and cutting is performed in that order ■ The motor for table movement uses a servo motor ■ Three-speed shifting is possible: high, medium, and low ■ Table movement dimension measurement is conducted using a magnetic scale, allowing for measurements in 0.1mm increments and maintaining precision semi-permanently.

The NRGII-M370 is a high-precision radial saw designed for automatic processing of resin cushioning materials such as corrugated plastic and polyurethane foam. It is also compatible with wood and aluminum profiles, enabling groove processing at any angle. ● Intuitive Operation Using a touch panel, the intuitive operation allows anyone to easily input processing data. Once set, work data can be stored for up to 99 types for future use. ● High-Precision Dimension Measurement Dimension measurement using a magnetic scale achieves high precision to within 0.1mm. ● Features - Free Angle Cross-Cut Type: The swing of the left and right arms allows for cutting at any angle. - Precise Angle Setting: A vernier scale with a diameter of 300mm enables settings with precision to the minute. - Long-Term Precision Maintenance: The accuracy remains unchanged for a semi-permanent period, allowing for long-term use. - Three-Stage Speed Adjustment: Variable speeds of high, medium, and low ensure stable movement and accurate positioning. - Ball Screw Feed System: The stable front and rear movement of the cutting head provides consistent quality.

The "NRM type" is a groove processing machine that grooves materials such as wood, aluminum profiles, and resin boards.

Features of the UCRA Type Circular Saw Cutting Machine ■ Cuts a maximum width of 250 mm × height of 70 mm (φ355) in one pass ■ The blade shaft can be adjusted up and down using a handle ■ Equipped with a safety cover that also serves as a dual-side clamp for safe and secure processing ■ Capable of both cutting and grooving operations with a single machine

This is software that allows you to easily create and edit processing programs for radial saws on an office PC and transfer them to the cutting machine via USB. In the work area, you can simply select the part number on the touch panel to call up the program. The scheduled data creation feature significantly reduces preparation time before work. ✅ Basic Specifications - Data transfer method: USB memory - Operation method: Main unit touch panel (part number selection) - Program reservation: Yes (scheduled data creation) - Compatible models: 3-axis radial saw / 2-axis radial saw

At Okumura Machinery Manufacturing, we handle the "Fully Automatic Housing Component Groove Processing Machine." We offer a lineup that includes the "NRK type," a table-moving type equipped with a 3.7kw to 7.5kw spindle drive motor, as well as the "NHRPK type," a table-fixed and head-moving type, and the "CH2SNR type," which features a dual-axis groove processing chucking feed mechanism. Additionally, we have a wide range of options available. Please contact us for more details. 【Product Lineup】 ■ Table-moving type "NRK type" ■ Front arm-less table-moving type "NRP type" ■ Table-fixed and head-moving type front arm-less "NHRPK type" ■ Dual-axis groove processing chucking feed mechanism "CH2SNR type"