奥村機械製作所 List of Products and Services

The "Power Cross Cut Saw ACP-T470-5" is a cutting machine designed to swiftly cross-cut aluminum profiles, wood, and siding boards using a circular saw (chip saw). 【Features】 ■ Heavy-duty cutting capability with a high-output 3.7 kW motor. ■ Front and rear sliding circular saw allows for large cross-section cutting. ■ Down-cutting method achieves a stable cutting surface without burrs on the material. ■ The saw travel guide uses linear guides to maintain high precision. ■ The saw drive employs an air-hydraulic system for stable saw movement.

The "ACP Cross Cut Saw" is a cutting machine that rapidly crosscuts wood and aluminum profiles using a circular saw (chip saw). ■ The axis can be freely adjusted from 0 to 45 degrees. ■ The front and rear sliding mechanism of the circular saw allows for cutting large cross-sections. ■ The down-cutting method enables stable cutting surfaces without burrs on the material. ■ The saw axis travel guide uses LM guides to maintain high precision over a long period. ■ The saw axis travel employs an air-hydraulic system to achieve stable and beautiful cuts. ■ The front arm-less design improves workability. ■ It comes standard with a cutting oil spraying device (for cutting aluminum sashes). ■ We can also manufacture cross cut saws equipped with automatic length-setting devices for continuous fixed-length cutting.

The ACP-T475J cross-cut saw is a cutting machine designed to quickly cut long materials with a circular saw (chip saw). - Due to its circular saw box motion mechanism (blade rises and then retracts), the returning blade does not contact the material. - The down-cut method allows for stable cutting surfaces without burrs on the material. - The saw axis travel guide uses LM guides to maintain high running precision over a long period. - The saw axis travel employs an air-hydraulic system to achieve stable and beautiful cuts. - The front arm-less design improves workability. - We can also manufacture cross-cut saws equipped with automatic length-setting devices for continuous fixed-length cutting.

This is a circular saw cutting machine specifically designed for ceramic exterior wall materials. With high rigidity upper travel, it produces finished products with no burrs or chipping on the surface material. The blade shaft can be tilted from 90 degrees to 45 degrees.

The ACP series is a cutting machine for chip saws designed to handle "fragile siding boards," "wood and construction materials prone to splintering," and "aluminum sashes that are prone to deformation." 【Features】 ■ Front and rear sliding mechanism for circular saw - Capable of cutting large sections. - Can be installed against walls as the workpiece does not need to be moved. ■ Down-cutting method - Enables stable cutting surfaces without splintering on the surface material. - Suitable for workpieces that are prone to deformation. ■ Front arm-less type - Improves workability as the only obstacle on the workbench is the clamp bar. For siding board dedicated cross-cut saws, please refer to the related pages below.

We would like to introduce our "Running Saw" products. Our lineup includes the "Lower Saw 2-Axis Cross-Cut Saw," which clamps materials and cuts multiple pieces at once, as well as the "Lower Saw 1-Axis Mirror Cut Saw" and "Full Auto Running Saw," primarily used for precision cutting of non-ferrous metal sheets. We accommodate cutting processes for various materials, including wooden products such as general plywood and specialty plywood, synthetic resins, non-ferrous metals, artificial marble, and exterior wall materials. 【Product Lineup】 ■ Lower Saw 2-Axis Cross-Cut Saw ■ Lower Saw 1-Axis Mirror Cut Saw ■ Full Auto Running Saw ■ Lower Saw 2-Axis Running Saw ■ Upper Saw 1-Axis Running Saw

The "ACGII-A" is a semi-automatic circular saw cutting machine that can swing the radial arm left and right to cut at various angles. The swing angle of the left and right arms can go up to 60°, and the axis tilt angle can be adjusted up to 45° to the right, making it ideal for cross-cutting long materials. The circular saw is positioned on a table and automatically passes the workpiece through using an air-hydraulic cylinder. Instead of moving the workpiece like a tilting table, the circular saw can be moved to match the cutting length while keeping the workpiece fixed. It can be placed along a wall when space is limited. The circular saw axis can be raised and lowered, allowing for groove processing as well. 【Features】 ■ Capable of making right-angle cuts, various angle cuts, and groove processing ■ The cutting tool guide shaft is made of hardened and polished material ■ Groove processing can be performed by raising and lowering the circular saw axis Options: - Sliding backstop ruler - Angle digital display - Rear chip collection cover *For more details, please refer to the PDF document or feel free to contact us.