ユニパルス Product Lineup

The UPP-100N is a compact load cell that is ideal for measuring compression and tension loads, making it convenient for mounting devices and other applications. It has a capacity of 100N and can withstand 500% overload, making it very robust against overload conditions. Compared to S-type load cells, it has a higher responsiveness and can measure dynamic loads. It is recommended as a load sensor for click testers, push testers, and similar applications. We recommend the FS2000 as a digital indicator to fully utilize the performance of the UPP. ▼ Unipulse Official Online Store 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.

• Sensors
• Sensors

The USM is a small compression and tension load cell. It is convenient for mounting on devices and is ideal for measuring compression and tension loads. Capacities available are 1N, 2N, 5N, 10N, 20N, and 50N. It has a strong overload resistance of 500%, allowing for highly responsive measurements. It is recommended for measuring thread tension, injection needle insertion force, and experiments. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.

• Sensors
• Sensors

The UPP-100NX3 is a three-component force gauge that can output rated loads in Fx, Fy, and Fz (three axes) as a ±5V voltage. By simply connecting it to the dedicated amplifier FS300 and supplying DC 24V, calibrated voltages at rated loads are output simultaneously in three directions without any adjustments. It has a load capacity of 500% and is resistant to overload, making it a three-component force gauge that balances high sensitivity and high rigidity. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.

• Sensors

■High Response, High Stability, High Resolution, Capacitive Non-Contact Displacement Sensor The PS-IA-HS is an ultra-precise non-contact displacement sensor that utilizes a unique capacitive method, achieving high response, high stability, high resolution, and versatility. With a proven track record and high evaluation, the user-friendliness of the PS-IA has been maintained while the response speed has increased fivefold. It enables the measurement of high-speed displacement phenomena that were previously difficult to measure. It is ideal for measuring the wobble of rotating objects and for closed-loop control of piezo stages. * A wide lineup with a standard measurement range of 30μm to 10,000μm * Sensitivity remains unchanged regardless of material if it is a conductor * Not affected by surface roughness * High linearity: ±0.05% or less * Response speed of 5kHz We will make recommendations based on your usage environment. Please feel free to contact us.

• Distance measuring device

By inputting the weight signal from the load cell installed on the conveyor and the speed signal from the speed detector, it displays and outputs instantaneous transport volume, cumulative transport volume, load density, load rate, and more. Additionally, by setting a target value for the transport volume, it can control the transport volume. - Pulse input function - Cumulative pulse output function - Zero/span correction function - Graphic function - Moisture correction (set moisture content and correct cumulative transport volume) - Alarm output

• Other process controls

A weighing indicator developed for quantitative supply/loss-in-weight applications. By measuring the discharge amount of materials in the hopper, it calculates the flow rate and can automatically manage quantitative supply (discharge) and replenishment (charge). - Pulse input function - Accumulated pulse output function - PID control function - Master/slave function (convenient for controlling auxiliary material supply hoppers) - Interlock function - Graphic function - Weighing status message function

• Other process controls

A weighing indicator developed for formulation measurement. It allows for automatic weighing by switching between input and output, with 200 types of formulations and 100 types of raw materials pre-registered. - Registration of 200 types of formulations and 100 types of raw materials - Up to 30 types of raw materials can be registered for each formulation - Automation of weighing and discharging for each raw material - Display function for raw material numbers during weighing - Display of formulation names and raw material names in kana and kanji - Timer management function - Replenishment function for over/under quantity (automatic/manual) - Power outage protection function - Weighing status message function

• Other process controls

A weighing indicator developed for total quantity measurement. It demonstrates its power when performing large-capacity measurements with a small measuring device. By appropriately combining various control functions and judgment conditions, such as automatic switching for coarse input, it enables measurement to be done "quickly" and "efficiently with fewer cycles." - Automatic switching for coarse input (automatically switches between coarse input and large, medium, and small inputs based on cumulative values) - Automatic calculation of batch counts - Graphic functions - Correction weighing function (monitors the ratio of remaining quantity to cumulative quantity and automatically corrects each batch quantity to match the accuracy of the measuring device)

• Other process controls

A weighing indicator developed for checkweighers. It features an optimal "running mode" for situations where belt speed and the dimensions of the weighed items are not constant, and a convenient "static mode" for cases where there is variation in the weight values of the items, allowing for easy construction of a weighing system tailored to the application. - Measurement results can be checked in real-time on the screen, and various calculation displays are possible through the aggregation function. - A registration function for 100 different product types. Reference settings, overage, shortage, and other preset values can be registered in advance.

• Other process controls

Measuring the gripping force of workpieces in lathe chucks The UniChuck is a wireless chuck gripping force measuring device. It allows for easy confirmation of the gripping force of workpieces in lathe chucks via wireless technology. By implementing planned maintenance, it significantly contributes to reducing unexpected failures, improving productivity, and enhancing quality by decreasing variations in machining accuracy. Please consult our sales department for more information.

• Other FA equipment

Automatic correction of center misalignment in the press-fitting process. The center master is a device that automatically corrects the misalignment of the center position during the press-fitting of component assembly. It fundamentally suppresses the causes of assembly defects, achieving improved quality and reduced labor hours.

• Other FA equipment

The F340A is a digital indicator for strain gauge sensors. It is ideal for measuring pressure, load, torque, weight, etc., and for pass/fail judgment in automatic machines and sorting machines. With its compact DIN96□ size, peak/sample hold function, upper and lower limit comparison function, and equivalent input calibration function that allows calibration independent of actual load simply by entering the rated values of the sensor, it is a practical device that pursues convenient features at a low price. For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments
• Torque Meter
• Pressure

The F490A is a compact, lightweight, handheld digital indicator for strain gauge sensors that enables measurement of load, pressure, and torque in the field. It records measurement data in CSV format in internal memory, and files can be referenced and copied via a USB interface. It features a variety of information displays, four types of hold functions including peak/bottom, a multi-calibration function that records calibration values for four channels and allows retrieval by field sensors, and upper/lower limit comparison functions. It operates on AA alkaline batteries, allowing for approximately 30 hours of continuous use (with a 350Ω sensor connected and backlight off). For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments
• Torque Meter
• Pressure

The F800 is a weighing indicator for automatic weighing systems. It supports various PLC networks, including DeviceNet and CC-Link. It is equipped with features that can accommodate any weighing system, such as a product setting function that allows you to pre-set weighing conditions for up to 100 products, and a weighing sequence function that directly controls the input and output gates simply by providing a target weight value. For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments
• Other weight measuring instruments

The F730 is a weighing indicator approved for use in "transactions or certification." It features high-speed A/D conversion and digital processing capabilities at 300 times per second, a convenient upper and lower limit comparison function for checkers, and statistical calculation functions, making it a practical device with excellent cost performance. It can be equipped with interfaces that allow connection to PLCs and various peripheral devices, such as BCD output and RS-232C. JIS B 7611-2:2009 For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments
• Other weight measuring instruments

The F600AT is a low-cost weighing controller that pursues operability and functionality. Its adoption of an LCD touch panel allows for easy operation without a manual, providing excellent visibility and usability. In addition to waveform display functionality, it is packed with essential features for weighing, such as direct connections to PCs and PLCs via RS-232C, DeviceNet, and CC-Link. With a dedicated PC application, it is also possible to edit and save settings from a computer. For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments
• Other weight measuring instruments

The F159 is a weighing indicator that can be directly connected to the Omron general-purpose PLC SYSMAC CJ1/CJ2 bus. By simply providing setting instructions, it directly controls the input and output gates. Since all weighing control is handled by the F159, the load on the CJ1/CJ2 is significantly reduced, allowing for the construction of a faster weighing and control system line that is not affected by the timing of commands from the CJ1/CJ2. For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments
• Other weight measuring instruments

The AM32AZ features a wide bandwidth of DC to 100kHz and a maximum gain of 10,000 times, while maintaining the low drift performance of the AM30AZ. It is equipped with a convenient digital switch calibration for easy calibration of both voltage values and distortion amounts, enhancing usability. For more details, please contact us or refer to the catalog.

• Amplifier
• Other electronic measuring instruments

The LC1111 is a high-performance, ultra-compact load cell converter. It is an instrumentation amplifier that stably amplifies the minute voltage obtained from a load cell. You can specify AC100V or DC12-24V at the time of order, and it is equipped with a bridge excitation power supply, zero and gain adjustment circuits, calibration functions, voltage and current output functions, and a low-pass filter. For more details, please contact us or refer to the catalog.

• converter

The LD514 is equipped with all the necessary functions in a compact body the size of a business card. It is a display device that can be easily placed where you want to see it, serving as an indicator without a display section or for management from a distance. It features a compact type with a character height of 14mm and uses green LED for numerical display. The displayed values can be selected from indicated value, total weight, net weight, and tare weight. For more details, please contact us or refer to the catalog.

• Display

The LD557A features a large, high-brightness LED display that is easy to read and housed in a robust, waterproof and dustproof casing. It is a large display device with a character height of 57mm, compatible with SI/F and current loop. The displayed values can be selected from indicated value, total weight, net weight, and tare weight, and the display value can be held by an external signal. A wall mounting bracket is included, and hanging brackets and a hood are available as options. For more details, please contact us or refer to the catalog.

• Display

The LD5100A is a high-brightness green LED display housed in a robust, drip-proof and dust-proof casing. It is a large display with a character height of 100mm, compatible with SI/F and current loops. The display values can be selected from indicated value, total weight, net weight, and tare weight, and the displayed value can be held by an external signal. It can be mounted on a wall or suspended (optional) using mounting brackets. For more details, please contact us or refer to the catalog.

• Display

The E500 is a versatile multi-converter that is convenient for connecting external devices. It allows for various signal conversions through combinations of interfaces, such as serial-parallel conversion and D/A conversion. ■ Voltage and Current Output Type: (with DAC) - Outputs voltage and current signals proportional to the weight value of the Unipulse indicator on SI/F or SI/FII. (SI/FII is when equipped with SI2) - Converts BCD data into voltage and current signals for output (when equipped with BI3) ■ BCD Output Type: (with BO1 or BO2) - Converts and outputs the weight value, set value, brand, and cumulative value of the Unipulse indicator into BCD parallel data (when equipped with BO1; set value, brand, and cumulative value are when equipped with SI2) ■ Serial Output Type: (with BI1 or BI2) - Outputs BCD set values from PLCs, etc., to the Unipulse indicator on SI/FII (when equipped with BI1 & SI2) - Outputs BCD weight data to Unipulse printers or displays on SI/F (when equipped with BI1 or BI2) For more details, please contact us.

• converter

The UNCSR is a super compact compression load cell with a diameter of 12mm and a height of 4mm. The capacities are 5N, 10N, 20N, and 50N. It is available in aluminum (5N, 10N) and stainless steel (20N, 50N). The UNCSR-FG comes with a plate for screw fixation. The cable is a φ3 4-core shielded cable, 3m long, with a fine wire at the end. The UN load cell series offers an optimal lineup for force measurement in industrial machinery, production equipment, and experiments/research. They are also readily available whenever needed, ensuring peace of mind for adoption in production lines.

• Sensors

The UNLRS is a small stainless steel compression load cell with a diameter of 20mm and a height of 9.5mm. The capacities are 100N and 200N. The UNLRS-FG comes with a plate for screw fixation. The cable is a φ3 4-core shielded cable, 3m long, with a fine wire at the end. The compensation temperature range is 0 to +60°C, and the allowable temperature range is -10 to +60°C. The UN load cell series offers an optimal lineup for force measurement in industrial machinery, production equipment, and experiments/research. They are also readily available whenever needed, ensuring peace of mind for use in production lines.

• Sensors

The UNLS is a small stainless steel compression load cell with a diameter of 21mm and a height of 10mm. Its capacity ranges from 500N to 5kN. The UNLS-FG comes with a plate for screw fixation. The cable is a φ3 4-core shielded cable, 2m long, with a fine wire at the end. The compensation temperature range is 0 to +50°C, and the allowable temperature range is 0 to +60°C. The UN load cell series offers an optimal lineup for force measurement in industrial machinery, production equipment, and experiments/research. It is also readily available whenever needed, ensuring peace of mind for adoption in production lines.

• Sensors

UNBF is a compact and slim compression-type load cell that can be easily installed in existing equipment. The capacity ranges from 300N to 500kN and it is made of stainless steel. The compensation temperature range is -10 to +60°C, and the allowable temperature range is -20 to +70°C. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

• Sensors

UNGS is a stainless steel compression load cell. The rated capacities are 1, 2, 5, 10, and 20 kN. It is widely used in small and low-capacity applications. The compensation temperature range is -10 to +60°C, and the allowable temperature range is -20 to +80°C. The cable is a φ6 4-core shielded cable, 3m long, with a bare end. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

• Sensors

UNTCH is a load cell for pressing and insertion. In the assembly processes commonly used in automotive parts, it is becoming essential to measure the load applied to the workpiece during pressing and riveting operations in order to determine quality and manage load. UNTCH is easy to install on pressing machines and is the ideal load cell for load management in pressing and riveting applications. We offer a wide range of capacities including 5kN, 10kN, 20kN, 50kN, and 100kN. Additionally, it excels in responsiveness, making it perfect for capturing dynamic load changes.

• Sensors

The UNCLB is a compact-sized, female-threaded compression and tension load cell that is convenient for installation. It is ideal for measuring compression and tension loads and is suitable for mounting on devices. Capacities of 500N, 1KN, 2KN, and 5KN are available. Compared to S-type load cells, it has a higher responsiveness and can measure dynamic loads. It is a recommended load sensor for integration into production lines, devices, and experimental setups. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.

• Sensors

The SB14 is a high-precision, stainless steel, fully welded sealed beam-type load cell. It can be used for platform scales, hopper scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

• Sensors

USC is a high-precision, stainless steel, fully welded sealed single-point load cell. It can be used for platform scales and more. The capacities are 20, 50, and 150 kg, made of stainless steel, and fully welded and sealed. It has a high input impedance of 1100Ω. The cable is a φ5 4-core shielded cable, 3m long, with a lead wire at the end. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

• Sensors

The F381A is a digital indicator that can display physical quantities such as pressure, load, and torque in waveform format, in combination with a strain gauge sensor. It allows for a visual representation of changes in physical quantities that are difficult to grasp with numbers alone. With high-speed processing at 4000 times per second, it can respond to subtle changes in values and is equipped with a variety of hold functions and judgment functions, including upper and lower limit comparison (including waveform comparison). It can be used in a wide range of applications such as production management control systems, automated equipment, or testing machines. For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments

The F325 is a digital indicator for strain gauge sensors with a size of DIN 96×48mm. With analog/digital hold and high-speed processing at 3000 times per second, it measures dynamic phenomena quickly and with high precision. It comes standard with serial output (RS-485 or SI/F), allowing network connections of up to 32 units (RS-485 only). It is ideal for applications with short tact times, such as tablet presses and capping machines.

• Other measurement, recording and measuring instruments
• Torque Meter
• Pressure

A digital indicator compatible with 2-channel strain gauge sensors. It is equipped with calculation functions such as ch1 + ch2 and ch1 - ch2, making it ideal for load measurement of total load, differential, and balance. This practical device features a compact DIN96□ size, high-speed sampling at 3000 times per second for each channel, and an equivalent input calibration function that allows calibration independent of actual load by simply inputting the rated values of the sensors.

• Other FA equipment

■ A color LCD display (graphic display) and touch panel that allows for easy and comfortable operation thanks to the adoption of a pop-up menu ■ High-speed A/D conversion at 1000 times per second and high-speed digital processing capability ■ Ideal for networking in weighing applications. Compatible with DeviceNet, CC-Link, and Ethernet ■ Powerful filters with ultra-low drift, waveform mode, high resolution, high reliability, convenient full digital calibration, memory for 100 types of brands, worldwide specifications, and weighing sequence functions

• Other process controls