ユニパルス List of Products and Services

The UNBF2 is a compact and slim compression-type load cell that can be easily installed in existing equipment. Compared to the UNBF, it has no box section, making it more compact and easier to wire. The capacity ranges from 30kN to 500kN, and it is made of stainless steel. The compensation temperature range is -10 to +60°C, and the allowable temperature range is -20 to +70°C. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

• Sensors

This is a stainless steel thin-type high-precision load cell. It supports a wide measurement range (1 to 470 tons)! It can be used for a wide range of applications such as tank scales and truck scales! The compensation temperature range is -10 to +40°C, and the allowable temperature range is -30 to +80°C. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

• Sensors

This is a stainless steel single-point load cell. It features a completely waterproof and high-pressure washdown sanitary design, with a round shape that allows water droplets and dust to easily fall off. Additionally, it is equipped with a reliable overload prevention mechanism. It can be used for bench scales, floor scales, conveyor scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp

• Sensors

PFA is a controller that can build press machines and testing machines without a PLC. Even those who are not familiar with motor control can easily create sequences using a touch panel. With high-speed processing of 5000 times per second, it captures subtle changes in values and enables high-precision control. It is equipped with various hold functions and judgment functions, including upper and lower limit comparison functions (including waveform comparison), allowing for comprehensive monitoring of processes and ensuring that defective products are not overlooked. ■ Controllers for various equipment such as press machines, screw tightening machines, and various testing machines ■ Pass/fail judgment with two inputs ■ Diverse comparison judgment functions ■ Preventive safety through trend display ■ Continuous testing without a PLC ■ Coordination with peripheral devices For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices
• controller

The UCC is a small stainless steel compression load cell with a diameter of 21mm and a height of 10mm. Its capacity is 10kN and 20kN. The cables are φ2 4-core shielded robot cable 2m with a terminal lead (UCC-10kN), φ3 4-core shielded robot cable 3m with a terminal lead (UCC2-20kN), and φ2 4-core shielded fluororesin cable 3m with a terminal lead (UCC(HL)). The compensation temperature range is 0 to +50°C (UCC, UCC2), -40 to +150°C (UCC(HL)), and the allowable temperature range is -10 to +60°C (UCC, UCC2), -40 to +150°C (UCC(HL)).

• Sensors

The UCPI is a thin, center hole type load cell that is ideal for integration into press machines and tensile/compression testing machines. It has a tapped center, allowing for measurement in both tension and compression. The cable features a connector for easy replacement. The compensation temperature range is -10 to +60°C, and the allowable temperature range is -20 to +70°C. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

• Sensors

This is a sanitary specification stainless steel single-point load cell designed for food manufacturing. It features a completely waterproof and fully stainless steel sealed structure. The round shape allows water droplets and dust to easily fall off, ensuring a clean design. Additionally, it is equipped with a reliable overload prevention mechanism. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp

• Sensors

MD252 is an intelligent data recorder that can easily connect to Unipulse weighing indicators and digital indicators. It allows for printing in formats tailored to your needs, such as statistical values and histograms. In addition to printing, it can also record data in internal memory and on an SD card, enabling dual data management. For more details, please contact us or refer to the catalog.

• Printer
• Other embedded systems (software and hardware)

The TC80-EIP is a compact indicator equipped with EtherNet/IP that can connect to the torque meters of the UTMII/III/V series. It can display torque and rotational speed, as well as measure torque fluctuations against angles. It features a hold function and can record the latest 100 hold data. The settings are easy to configure with a PC application that allows waveform viewing. For more details, please contact us.

• Torque Control
• Torque Meter
• Other measurement, recording and measuring instruments

The TC80-D3V is a compact type indicator equipped with a standard D/A converter voltage output (3 channels) that can connect to the torque meters of the UTMII/III/V series. It can display torque and rotational speed, as well as measure torque fluctuations against angles. It features a hold function that allows for the recording of the latest 100 hold data. The settings are easy to configure with a PC application that allows waveform viewing. For more details, please contact us.

• Torque Control
• Torque Meter
• Other measurement, recording and measuring instruments

A new flange type from Unipulse for the rotational torque meter has been launched. With an extremely high torsional rigidity of 1700 kNm/rad, it can increase the resonance frequency of the shaft, allowing for high-precision measurement of rapid torque fluctuations. Additionally, with a permissible overload of 500%, it has high fatigue strength, enabling stable measurements over long periods with minimal changes even under harsh load conditions. 【Features】 ■ High overload capacity of 500% ■ High rigidity of 1700 kNm/rad ■ Accuracy of 0.03% FS ■ Supports high-speed rotation up to 25,000 rpm ■ Balance grade G2.5 ■ Compatible with oil mist environments such as turbine oil ■ Analog bandwidth of 3 kHz, sampling frequency of 20 kHz ■ Standard equipped with rotational pulse signal output (90 to 1080 pulses/revolution: changeable by setting) ■ Torque has standard analog output of ±10V, frequency output, and RS-485 output ■ Standard dual range equipped (can switch to ±100 Nm range via external I/O input) ■ Capable of 2x calibration (1000 Nm) (load capacity 250%) ★ For characteristic testing of drive motors, generators, reducers, etc., in automobiles and more ★ *For more details, please contact us or download the PDF.*

• Torque Control
• Torque Meter

UST is a super small compression-type load cell with a diameter of 10mm, a height of 2.3mm, and capacities of 50N, 100N, 200N, and 500N, made of stainless steel. The rated output is approximately 1mV/V, and the allowable overload is 150% R.C. The compensation temperature range is 0 to +60°C, and the allowable temperature range is -10 to +70°C. The cable is a φ1.6 4-core shielded cable, 1m long, with a tapered end.

• Sensors

USLC/USLC(H) is a small stainless steel compression load cell. The capacities are 50kN and 100kN. The cables are φ2 4-core shielded robot cable 3m with a tapered end (USLC-50kN), φ3.8 4-core shielded robot cable 3m with a tapered end (USLC-100kN), and φ2 4-core shielded fluororesin cable 3m with a tapered end (USLC-50kN(HL)). The compensation temperature range is -10 to +60℃ (USLC-50kN, 100kN), -40 to +150℃ (USLC-50kN(HL)), and the allowable temperature range is -20 to +70℃ (USLC-50kN, 100kN), -40 to +150℃ (USLC-50kN(HL)).

• Sensors

It is widely used for various purposes, starting with tank scales. For more details, please contact us or refer to the catalog.

• Sensors

The "Moon Lifter" is an electric balancer that enables safe work and smooth positioning through handling that utilizes "tactile sensitivity," even with heavy workpieces. A lightweight version with simple dust and drip protection is newly available! (Scheduled for release soon) By holding the workpiece with both hands, it can be moved with light force, allowing for sensitivity to subtle feelings such as catching during fitting. It features functions such as a slow descent until it reaches the ground and immediate stopping when hands are released. It is ideal for assembly requiring precise positioning and for transporting delicate workpieces like glass. 【Features】 - Capable of transporting workpieces of different weights and shapes without changing settings - In the event of a power outage, the brake activates to hold the workpiece - No overload or chain bounce, ensuring safety and security - A wide range of options supporting from 10 kg to 1 ton - Available in dustproof types and HACCP-compliant types suitable for food manufacturing processes - Operates on AC100V or AC200V *For more details, please refer to the PDF materials or feel free to contact us.

• Balancer

Wireless measurement of load cells Ideal for automatic assembly equipment and hazardous locations!! Wireless measurement expands applications!! Thanks to wireless communication and battery operation, sensors can be installed even in places where cable wiring is difficult. Measurement values can be recorded in CSV format and easily imported to a computer via USB.

• Other FA equipment
• Pressure

This is a power assist device designed to move suspended workpieces with light force. You can hold the workpiece directly with both hands and smoothly raise and lower it. The lightweight model weighs only 8.5 kg, and lateral movement when installed on a rail is also smooth. Additionally, we offer a HACCP-compliant type for the food industry. It allows for precise positioning where you want to stop, enabling gentle handling with both hands that won't damage the workpiece. We provide comprehensive proposals, including custom lifting devices and ceiling cranes tailored to the workpiece. A new lightweight model with simple dustproof and drip-proof specifications will be released soon! 【Features】 - Constant weight detection with sensors - Operates simply by plugging into an outlet - Positioning can be done in millimeter increments - Movement can be customized according to the task - Flexibly accommodates workpieces of varying weights ● For more details, please contact us.

• Balancer

"Uniservo" is the first robot actuator that incorporates the functions of a torque servo. It allows for arbitrary increase or decrease of the torque on the output shaft, as well as detection of the torque applied to the output shaft, enabling specification of the motor-side torque increase or decrease and rotation angle. Additionally, it can generate the specified torque and also create friction and inertia, making it applicable to various loads, testing devices, and simulators that mimic human behavior. The rated capacities include five models: 15W, 40W, 80W, 200W, and 750W. ■ Features ○ Equipped with a high-resolution, high-speed response rotary torque meter on the output shaft for simple, fast, and high-precision torque control based on measured torque. ○ Compact design with a reduction gear for high torque output. ○ A dynamic range of 10,000 times enables fine torque control even at high torque capacities. For more details, please contact us or download the catalog.

• Servo motor

The "UniServo" is a motor that can simultaneously meet high-speed response, sufficient torque, and safety. It consists of an AC servo motor, a reduction gear, and a precision torque meter. Even when increasing power, the motor itself can measure torque while detecting and controlling force (load). By using the UniServo, it becomes possible to perform tasks that are closer to human capabilities, resulting in safer robots. 【Features】 ○ Equipped with a high-resolution, high-speed response rotational torque meter on the output shaft for simple, fast, and high-precision torque control based on measured torque. ○ Compact with a reduction gear, providing high torque. ○ Achieves fine torque control even with large torque capacity due to a dynamic range of 10,000 times. For more details, please contact us or download the catalog.

• Servo motor

The "USV console" is a touch panel terminal that connects to the Uniservo controller via USB for basic operations and parameter settings. It integrates a reducer and a high-speed, high-precision rotational torque meter, allowing for torque control based on output shaft torque. It enables more advanced control that was difficult with conventional positioning control. It is ideal for actuators in applications requiring safety, such as in nursing robots. 【External Dimensions】 ○W170mm × H140mm × D25.3mm For more details, please contact us or download the catalog.

• Servo motor

The electric balancer "Moon Lifter" is a power assist device that allows you to carry heavy objects with a small amount of force, similar to lifting a smartphone. It enables safe operation and smooth alignment through handling that utilizes "tactile sensation." You can hold the workpiece with both hands and move it with light force, allowing you to feel subtle sensations such as snags during fitting. It features functions like slow descent until it touches the ground and immediate stopping when you release your hands. It is ideal for assembly that requires precise positioning and for transporting delicate workpieces such as food and glass. Recently, the lightweight model has evolved further, now equipped with simple dustproof and drip-proof functions, and has been upgraded in power compared to the previous model. 【Features】 - The main unit weighs only 9 kg and can support up to 80 kg! - The chain and hand cover are made of stainless steel. - It can be used in a wide range of environments, including sites where water may splash or where there is a lot of dust. - The only required facility is a power source, compatible with AC 100-240V free power supply. If 60 kg is not enough capacity, or if you need a bit more capacity when including the weight of the lifting equipment, we can propose an electric balancer tailored to your needs. *For more details, please download the PDF or contact us directly.

• Balancer

A colorful lineup of measuring instruments!! We measure various "forces," including pressure measurement, weight measurement, torque, tension, and vibration. 【Featured Products】 - Slip ring-less rotary torque meter - High-precision load cell - Digital indicator with waveform comparison function - Touch panel load cell indicator - Wireless clamp force measuring device - Wireless chuck force measuring device - Vibration meter A comprehensive catalog is also available for free!! Please inquire using the form below.

• Torque Control
• Torque Meter

In measurements of engines with significant vibrations, please use a double disc coupling and support it with double bearings to prevent vibrations from being transmitted to the UTMII.

• Torque Control
• Torque Meter

We will measure the load torque applied to the axis of the stirring blades due to stirring. The viscosity variations caused by mixing operations or reaction operations in chemical processes can be captured as fluctuations in stirring torque values. By using our products TM301 and F377A, you can output contact signals at the upper and lower limits of the torque.

• Torque Control
• Torque Meter

By measuring the torque value while tightening the screws, we conduct inspections of the screw tightening work. Since the torque can be constantly monitored, it can be applied to automated control such as screw tightening robots.

• Torque Control
• Torque Meter

By inserting a UTMII between the rotary encoder and the motor, it is possible to configure a servo motor with torque output. Various applications can be considered, such as robot hands capable of force detection and overload detection.

• Torque Control
• Torque Meter

From the torque and rotation pulse signals from UTMII, the torque and power characteristics in relation to the rotational speed can be measured. Additionally, by utilizing regenerative power, an eco-friendly testing machine can be realized.

• Torque Control
• Torque Meter

By using a UTM equipped with a rotary encoder option, you can obtain torque output corresponding to each rotation. This can be applied to the automation of sensory testing and other applications.

• Torque Control
• Torque Meter

■Couplings compatible with UTMIII, UTMII, and UTMV The UTM series is designed to minimize the impact of thrust loads and radial loads (other than torsion) on measurement results. However, excessive thrust loads and radial loads can not only introduce errors in the measurement results but also cause overheating of the bearings supporting the measurement axis, deformation of the strain gauge section, and even breakage. To solve such problems, please use the UCM/UCS/UCD couplings compatible with UTMIII, UTMII, and UTMV.

• Coupling

The torque monitor allows for easy checking and importing of the time variations of output data (torque, rotational speed, power) from the UTMII series rotary torque meter on a computer.

• Torque Control
• Torque Meter
• Other measurement, recording and measuring instruments

The UniClamp is a wireless spindle clamping force measurement device. By setting the main unit in the tool magazine and attaching it to the spindle using ATC, you can easily check the clamping force (gripping force) of BT and HSK spindle machines wirelessly. It significantly contributes to reducing unexpected failures through planned maintenance, improving productivity, and enhancing quality by reducing variations in machining accuracy. The compatible shank is BT20. Please feel free to consult our sales team.

• Other FA equipment

The PS sensor is an ultra-precise non-contact displacement meter that adopts a capacitive method using proprietary technology, achieving high stability, high resolution, and versatility. It is used in a wide range of fields such as displacement, vibration, shape, and position detection, and has received high praise as a versatile displacement meter that pursues cost performance. Additionally, considering the impact on the global environment, all products are lead-free and comply with the RoHS directive. The PS-III series consolidates multiple channels into a single housing, operates on AC100V, and is the definitive version of the PS sensor series, incorporating various functions. It can be used not only for research and development purposes but also for integration into systems.

• Distance measuring device

This is a device that can measure changes in displacement and vibration quickly and non-contact by irradiating light onto the measurement target through optical fiber and detecting the reflected light. Since it uses light for measurement, it does not impose any load on the measurement target and is not affected by magnetic or electric fields. Additionally, the interchangeable sensor module can be replaced or selected according to the required sensitivity, measurement range, frequency band, and spot diameter. The "PM-E," which pursues miniaturization and simplicity, is a product that meets a wide range of demands in research and development as well as various industrial fields.

• Other measurement, recording and measuring instruments

TM301 is a display unit that can be easily connected to the torque meter UTMII series with a dedicated cable. It features the ability to display pulse signals as rotational speed (RPM) and includes automatic power calculation functions, allowing simultaneous display of torque, rotational speed, and power. It is equipped with a hold function for torque values and an alarm function that activates when set upper and lower limits are exceeded, making it suitable for various applications such as quality control for overload detection, power characteristic testing, and automatic control of robots. It also has a data recording function that complies with SI/F printing commands (up to the latest 30 data points), and data can be checked on-site through key operations. For more details, please contact us.

• Torque Control
• Torque Meter
• Other measurement, recording and measuring instruments

World's first! Visualizing the gripping force of tool holders! Supporting preventive maintenance of machine tools and improving processing quality. ■ Main Features - Ideal for hydro chucks - Sensor probe compatible with diameters from φ4 to φ32mm - No need for reconfiguration after replacement as the sensor information is built into the sensor probe - Easy data management with the REC button for recording - One-button switching between gripping force (N) and slip torque (Nm) - Comes with a convenient carrying case for storage and transport

• lathe
• Milling machine
• Other machine tools

The preload measurement system is a management tool that can be used for daily inspection tasks to check the preload inside the gearbox. The main unit can be set inside the gear, allowing for easy and safe preload checks. Simultaneous measurement of up to 4 channels is possible. It is ideal for managing internal pre-pressure during the assembly of gears and similar components.

• Other inspection equipment and devices

UTMII is a rotary torque meter with an ultra-compact body that incorporates an amplifier. It features a resolution of 1/10000, excellent zero-point stability, low starting torque, high-speed response with a cutoff frequency of 1 kHz (sampling at 6 kHz), high precision of 0.03%, support for high-speed rotation up to 25000 rpm, and a 500% overload tolerance, achieving a wealth of functions and high performance. It is suitable not only for general dynamic torque measurement but also for various applications as a high-performance sensor for equipment integration. ★☆ The long-awaited drip-proof and rust-proof type, with a square drive option, is now available! ☆★ ★ Free demos available ★ We are currently accepting requests for free demos. Please feel free to consult us.

• Torque Control
• Torque Meter

★★New Feature 1★★ You can now switch the necessary data from the TOP screen with a single touch. In addition to the conventional main display values, total weight, and net weight, you can easily switch between measurement error and measurement result display values with one touch. The history function, which allows you to check measurement results, enables you to see analysis and trends at a glance. In addition to measurement results, code numbers and judgment results are also clearly expressed. In the weight checker, there are many data points such as current weight, measurement results, and measurement errors that you want to constantly check during operation. The enhanced weighing screen of the F650-CK is definitely worth trying out. ★★New Feature 2★★ We have prepared a backup tool for setting values. By downloading the free backup tool from the Unipulse website, you can read and write setting values. This tool is very effective not only for managing setting values but also for expansions and other purposes. The instruction meter, featuring a rich array of functions such as surplus and deficit comparisons of various weighing modes, ranking, essential statistical data and histogram displays for quality control, and graph displays that facilitate adjustments, is now available in a compact DIN 96×96 size!

• Other process controls
• Weighing Machine
• Other measurement, recording and measuring instruments

■Drip-proof and rust-resistant type Can be used outdoors, such as in windmills and waterwheels, or in machine tools exposed to water or oil. * Protection rating: Equivalent to IP65 * Rust-resistant stainless steel material * Capacity: 0.1Nm/0.5Nm/1Nm/5Nm/10Nm/50Nm/100Nm/500Nm/1000Nm/5000Nm

• Torque Control
• Torque Meter

It is possible to measure the power generation efficiency of wind power generation and other sources. By inserting UTMII onto the rotating shaft and calculating the power from torque and rotational speed, we can determine the power generation efficiency by comparing it with the actual energy generated.

• Torque Control
• Torque Meter

By measuring the axis torque of the conveyor during transport using devices like conveyors, it becomes possible to detect anomalies such as jamming. It can quickly detect foreign objects or the tipping of workpieces and stop the operation.

• Torque Control
• Torque Meter

It is possible to measure the load fluctuations when sending paper, foil, sheets, etc., with rollers. By measuring the torque, it becomes possible to quantitatively adjust and manage the rollers.

• Torque Control
• Torque Meter

In automotive parts such as steering, it becomes possible to quantify the smoothness of rotation by measuring torque, which can be used for shipping inspections.

• Torque Control
• Torque Meter

Torque can be measured in the twisting test of cables and wires, and it can be used for performance and durability testing.

• Torque Control
• Torque Meter

It is possible to quantify and manage the smoothness of movements such as levers and hinges. With the rotary encoder option, it is possible to capture the behavior of torque according to the angle.

• Torque Control
• Torque Meter