ユニパルス List of Products and Services

The "DSCB" is a load measuring device that can be easily measured just by connecting it to a computer or PLC. It is resistant to breakage with a load capacity of 500% and has good maintainability, making it ideal not only for testing machines and inline use but also for field applications. It is portable and can display load changes in real-time on a computer. It features a noise-resistant digital output compliant with the RS-485 standard and can be installed near motors or at the tip of robots. ● 1 kN, 2 kN, 5 kN, 10 kN, 20 kN, 50 kN ● High rigidity & high load capacity (500%) ● Excellent maintainability ● Built-in amplifier! ● Hold function and upper/lower limit comparison function can be used without a display! ● Real-time load change display on a computer!

Due to its high precision, it is ideal for calibration of testing machines and measuring instruments, research and development, and precision measurement applications. Its compact and lightweight design allows for flexible installation locations. Additionally, it is resistant to overload, easy to maintain, highly durable, and has minimal aging changes, ensuring stable long-term use.

The Super Cell (SCB) is a highly durable load cell designed to address the two major failure factors of load cells: overload and cable disconnection. It achieves a load capacity of 500% and uses robot cables. Moreover, it is not only durable but also highly responsive! It allows for short stroke press fitting comparisons and reduced takt times. ■ High Rigidity Achieves rigidity equivalent to piezoelectric sensors using strain gauge sensors! The deformation during loading is minimal, making it safe for use in measuring the cutting and grinding power of machine tools. ■ Overload Capacity of 500% There is no impact on accuracy even under overload conditions of up to 500% of the rated capacity. It can stably measure under harsh loads such as pressing and press fitting for extended periods. ■ No Calibration Required All zero points and full scales are adjusted at the factory, so calibration is not necessary when replacing the load cell. ■ High Responsiveness Achieves a resonance frequency comparable to piezoelectric sensors! It can also be used for monitoring high-speed phenomena. ■ Use of Robot Cables Utilizes robot cables that are resistant to cable disconnection.

In semiconductor manufacturing environments, equipment that does not generate siloxane from silicone resin is essential. UWR is a beam-type load cell that does not produce siloxane. Considering applications around silicon wafers, we use cables coated with fluororesin that do not generate chlorine gas.

The UIS is a load cell with a tensile and compressive type dual-end male thread. It has male threads on both ends and comes with a thin nut, making it easy to install with a double nut, allowing for both tensile and compressive measurements. With a height of 40 to 92 mm, it is compact and does not interfere with other equipment. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.

The USM is a small compression and tension load cell. It is convenient for mounting on devices and is ideal for measuring compression and tension loads. Capacities available are 1N, 2N, 5N, 10N, 20N, and 50N. It has a strong overload resistance of 500%, allowing for highly responsive measurements. It is recommended for measuring thread tension, injection needle insertion force, and experiments. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.

The URM is a small compression and tension type load cell. It is convenient for installation on devices and is ideal for measuring compression and tension loads. Capacities available are 50N, 100N, 200N, and 500N. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.

The UCW is a stainless steel ultra-compact compression load cell with a diameter of 7mm, a height of 4.5mm, and capacities of 50N, 100N, 200N, and 500N. The UCW2 has a diameter of 6mm, a height of 3.5mm, and capacities of 10N and 20N. The rated output is approximately 1mV/V, and the allowable overload is 200% R.C. The compensated temperature range is 0 to +60°C, and the allowable temperature range is -10 to +70°C. The cable is a φ1.6 4-core shielded cable, 0.5m long, with a fine wire at the end.

UST is a super small compression-type load cell with a diameter of 10mm, a height of 2.3mm, and capacities of 50N, 100N, 200N, and 500N, made of stainless steel. The rated output is approximately 1mV/V, and the allowable overload is 150% R.C. The compensation temperature range is 0 to +60°C, and the allowable temperature range is -10 to +70°C. The cable is a φ1.6 4-core shielded cable, 1m long, with a tapered end.

The UNCSR is a super compact compression load cell with a diameter of 12mm and a height of 4mm. The capacities are 5N, 10N, 20N, and 50N. It is available in aluminum (5N, 10N) and stainless steel (20N, 50N). The UNCSR-FG comes with a plate for screw fixation. The cable is a φ3 4-core shielded cable, 3m long, with a fine wire at the end. The UN load cell series offers an optimal lineup for force measurement in industrial machinery, production equipment, and experiments/research. They are also readily available whenever needed, ensuring peace of mind for adoption in production lines.

The UNLRS is a small stainless steel compression load cell with a diameter of 20mm and a height of 9.5mm. The capacities are 100N and 200N. The UNLRS-FG comes with a plate for screw fixation. The cable is a φ3 4-core shielded cable, 3m long, with a fine wire at the end. The compensation temperature range is 0 to +60°C, and the allowable temperature range is -10 to +60°C. The UN load cell series offers an optimal lineup for force measurement in industrial machinery, production equipment, and experiments/research. They are also readily available whenever needed, ensuring peace of mind for use in production lines.

The UNLS is a small stainless steel compression load cell with a diameter of 21mm and a height of 10mm. Its capacity ranges from 500N to 5kN. The UNLS-FG comes with a plate for screw fixation. The cable is a φ3 4-core shielded cable, 2m long, with a fine wire at the end. The compensation temperature range is 0 to +50°C, and the allowable temperature range is 0 to +60°C. The UN load cell series offers an optimal lineup for force measurement in industrial machinery, production equipment, and experiments/research. It is also readily available whenever needed, ensuring peace of mind for adoption in production lines.

The UCC is a small stainless steel compression load cell with a diameter of 21mm and a height of 10mm. Its capacity is 10kN and 20kN. The cables are φ2 4-core shielded robot cable 2m with a terminal lead (UCC-10kN), φ3 4-core shielded robot cable 3m with a terminal lead (UCC2-20kN), and φ2 4-core shielded fluororesin cable 3m with a terminal lead (UCC(HL)). The compensation temperature range is 0 to +50°C (UCC, UCC2), -40 to +150°C (UCC(HL)), and the allowable temperature range is -10 to +60°C (UCC, UCC2), -40 to +150°C (UCC(HL)).

USLC/USLC(H) is a small stainless steel compression load cell. The capacities are 50kN and 100kN. The cables are φ2 4-core shielded robot cable 3m with a tapered end (USLC-50kN), φ3.8 4-core shielded robot cable 3m with a tapered end (USLC-100kN), and φ2 4-core shielded fluororesin cable 3m with a tapered end (USLC-50kN(HL)). The compensation temperature range is -10 to +60℃ (USLC-50kN, 100kN), -40 to +150℃ (USLC-50kN(HL)), and the allowable temperature range is -20 to +70℃ (USLC-50kN, 100kN), -40 to +150℃ (USLC-50kN(HL)).

USH is a small stainless steel compression load cell. The capacities are 10kN, 20kN, and 50kN. The cable is a φ2.5 6-core shielded robot cable, 3 m long, with a terminal lead (USH-10kN, USH-20kN), and a φ5 6-core shielded robot cable, 3 m long, with a terminal lead (USH2-50kN). The compensation temperature range is -10 to +70°C, and the allowable temperature range is -30 to +85°C.

UNBF is a compact and slim compression-type load cell that can be easily installed in existing equipment. The capacity ranges from 300N to 500kN and it is made of stainless steel. The compensation temperature range is -10 to +60°C, and the allowable temperature range is -20 to +70°C. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

The UNBF2 is a compact and slim compression-type load cell that can be easily installed in existing equipment. Compared to the UNBF, it has no box section, making it more compact and easier to wire. The capacity ranges from 30kN to 500kN, and it is made of stainless steel. The compensation temperature range is -10 to +60°C, and the allowable temperature range is -20 to +70°C. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

UNGS is a stainless steel compression load cell. The rated capacities are 1, 2, 5, 10, and 20 kN. It is widely used in small and low-capacity applications. The compensation temperature range is -10 to +60°C, and the allowable temperature range is -20 to +80°C. The cable is a φ6 4-core shielded cable, 3m long, with a bare end. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

UWP is a washer-shaped load cell with a hole in the center. It is available in capacities ranging from 1kN to 20kN. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

The UCPI is a thin, center hole type load cell that is ideal for integration into press machines and tensile/compression testing machines. It has a tapped center, allowing for measurement in both tension and compression. The cable features a connector for easy replacement. The compensation temperature range is -10 to +60°C, and the allowable temperature range is -20 to +70°C. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

UNTCH is a load cell for pressing and insertion. In the assembly processes commonly used in automotive parts, it is becoming essential to measure the load applied to the workpiece during pressing and riveting operations in order to determine quality and manage load. UNTCH is easy to install on pressing machines and is the ideal load cell for load management in pressing and riveting applications. We offer a wide range of capacities including 5kN, 10kN, 20kN, 50kN, and 100kN. Additionally, it excels in responsiveness, making it perfect for capturing dynamic load changes.

The UNCLB is a compact-sized, female-threaded compression and tension load cell that is convenient for installation. It is ideal for measuring compression and tension loads and is suitable for mounting on devices. Capacities of 500N, 1KN, 2KN, and 5KN are available. Compared to S-type load cells, it has a higher responsiveness and can measure dynamic loads. It is a recommended load sensor for integration into production lines, devices, and experimental setups. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.

The UPP-100N is a compact load cell that is ideal for measuring compression and tension loads, making it convenient for mounting devices and other applications. It has a capacity of 100N and can withstand 500% overload, making it very robust against overload conditions. Compared to S-type load cells, it has a higher responsiveness and can measure dynamic loads. It is recommended as a load sensor for click testers, push testers, and similar applications. We recommend the FS2000 as a digital indicator to fully utilize the performance of the UPP. ▼ Unipulse Official Online Store 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.

The UPP-100NX3 is a three-component force gauge that can output rated loads in Fx, Fy, and Fz (three axes) as a ±5V voltage. By simply connecting it to the dedicated amplifier FS300 and supplying DC 24V, calibrated voltages at rated loads are output simultaneously in three directions without any adjustments. It has a load capacity of 500% and is resistant to overload, making it a three-component force gauge that balances high sensitivity and high rigidity. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.

A dual-force gauge that is strong against overload with a load capacity of 500% and combines a high-speed response of 2kHz with high rigidity.

It is widely used for various purposes, starting with tank scales. For more details, please contact us or refer to the catalog.

This is a stainless steel thin-type high-precision load cell. It supports a wide measurement range (1 to 470 tons)! It can be used for a wide range of applications such as tank scales and truck scales! The compensation temperature range is -10 to +40°C, and the allowable temperature range is -30 to +80°C. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

HLCB1 is a high-precision, stainless steel, fully welded sealed beam-type load cell. It does not require combination adjustments or recalibration when replacing multiple units, making it suitable for use in platform scales, tank scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.

The SB14 is a high-precision, stainless steel, fully welded sealed beam-type load cell. It can be used for platform scales, hopper scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

This is a high-precision, stainless steel beam-type load cell. It can be widely used for applications such as hopper scales and conveyor scales. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp ● For more details, please contact us or refer to the catalog.

You can use it for bench scales, floor scales, conveyor scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp

With a low bed design, it can be used for bench scales and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp

You can use it for bench scales, floor scales, conveyor scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp

You can use it for bench scales, floor scales, conveyor scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp

This is a stainless steel single-point load cell. It features a completely waterproof and high-pressure washdown sanitary design, with a round shape that allows water droplets and dust to easily fall off. Additionally, it is equipped with a reliable overload prevention mechanism. It can be used for bench scales, floor scales, conveyor scales, and more. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp

This is a sanitary specification stainless steel single-point load cell designed for food manufacturing. It features a completely waterproof and fully stainless steel sealed structure. The round shape allows water droplets and dust to easily fall off, ensuring a clean design. Additionally, it is equipped with a reliable overload prevention mechanism. ▼ Unipulse Official Online Shop 'UG ONLINE' https://load-cell.jp

USC is a high-precision, stainless steel, fully welded sealed single-point load cell. It can be used for platform scales and more. The capacities are 20, 50, and 150 kg, made of stainless steel, and fully welded and sealed. It has a high input impedance of 1100Ω. The cable is a φ5 4-core shielded cable, 3m long, with a lead wire at the end. ▼ Unipulse Official Online Shop 'UG ONLINE' ▼ https://load-cell.jp ● For more details, please contact us or refer to the catalog.

This is an online shop operated by Unipulse Corporation. You can easily purchase load cells, rotary torque meters, and non-contact displacement meters that we handle through the web. By scanning the QR code on the product page of the Unipulse Sensor Catalog, you can jump directly to the purchase page within UG ONLINE. Here is the Unipulse Sensor Catalog: https://www.ipros.jp/catalog/detail/400328?hub=148+1820008 ★Same-day shipping available★ - Orders paid by the morning of the same day will be shipped on the same day. - If the order includes items that are on backorder, they will be shipped after they arrive. ★Free shipping★ - Shipping is limited to within Japan. - Shipping fees will apply to certain areas, such as Okinawa and remote islands. For customers in the United States (50 states, Washington DC) and Mexico, the online store for load cells and torque meters "UG ONLINE USA + Mexico" is here! https://goodloadcell.com/

The "load cell" is convenient for measuring weight and force, with numerous achievements in applications such as measuring the load of press machines and tank weights. A new female screw type "UNN" load cell has been introduced with a double-ended screw design! Both UIS and UNN can measure both tension and compression. Like the UIS, it reduces the impact of twisting and lateral loads on accuracy, allowing for precise measurement of only tension and compression loads. The double-ended female screw structure makes it shorter in overall length than the UIS, enabling more compact equipment. **Features of the female screw type "UNN":** - When attached to a robotic hand, it can accurately measure pushing and pulling forces without being affected by the weight of the clamping part. - It allows for the construction of press machines without guides, reducing the number of components in the equipment. - Capacities of 1kN, 2kN, and 5kN are now available for sale, with 10kN and 20kN planned for future release! *The video shows how to install the double-ended screw type load cell "UIS." *For more details, please contact us or refer to the catalog.