日本テスコン List of Products and Services

The Gear Meter LSGG is a volumetric flow meter with intrinsic safety explosion-proof specifications. It can accurately measure paint without being affected by viscosity changes due to temperature variations. The output pulse signal has high resolution (0.04mL or 0.12mL), allowing for small quantities to be mixed, making it ideal for managing the mixing ratio of two-component paints.

• Flow Control

The BI-DIRECTION Flow Monitor is a visual type flow meter compatible with both forward and reverse flow. 【Accuracy】: ±4% FS 【Reproducibility】: ±1% FS 【Temperature】: MAX 116℃ (standard), * High-temperature specifications available upon inquiry 【Material】: <Non-contact part> Polycarbonate, Buna N, PTFE <Contact part> Buna N, PTFE-coated Alnico, Stainless steel 【Model】: B〈1〉〈2〉-〈3〉〈4〉〈5〉-〈6〉BI 〈1〉Diameter: 3 = 1/4" to 1/2", 4 = 3/4" to 1", 5 = 1-1/4" to 2" 〈2〉Material: A = Aluminum, B = Brass, S = Stainless steel 〈3〉Pressure: 6 = MAX 24MPa, 7 = MAX 42MPa 〈4〉Fluid: H = Oil (specific gravity: 0.873) scale, W = Water (specific gravity: 1.0) scale

• Flow Meter
• Pneumatic Equipment
• Flow Control

J Series MAX 315℃ Ultra High Temperature Compatible Flow Meter H Series MAX 204℃ High Temperature Compatible Flow Meter ◎ The high temperature compatible flow monitor is a visual type flow meter. ◎ No electrical work is required, allowing for direct flow confirmation. ◎ Since liquid does not flow in the scale area, reading the scale is easy. ◎ Scales are available for oil and water: For oil... Specific gravity: 0.873, For water... Specific gravity: 1.0 ◎ Installation orientation can be vertical or horizontal. ◎ Accuracy: ±2% F.S. ◎ Repeatability: ±1% F.S. ◎ Maximum operating pressure: MAX 42MPa (S), MAX 24MPa (A, B) ◎ Scales: For oil... DTE 25 @ 43℃, SG 0.873, For water... Water @ 21℃, SG 1.0 ◎ Compatible viscosity: MAX 110mm²/s ◎ Recommended filter size: 200 mesh ◎ Connection: NPT, BSPP, SAE ◎ Option: NIST traceable certificate Model: 1⃣2⃣3⃣-4⃣5⃣6⃣-7⃣-8⃣ 1⃣ Series: J: MAX 315℃, H: MAX 204℃ 2⃣ Connection diameter: 3: 1/4 to 1/2, 4: 3/4 to 1, 5: 1-1/4 to 2

• Flow Meter
• Other physicochemical equipment
• Flow Control

Water Flow Meter MIM Series 【Features】 - Electromagnetic flow meter using Faraday's law of electromagnetic induction - No moving parts in the flow path - Low pressure loss - No concerns about wear or clogging - Display can be rotated 90° according to installation position - Can be installed in both horizontal and vertical positions - Simultaneous temperature measurement - High-temperature version available (Max 140°C) - Can measure fluids with conductivity of 20μS/cm or higher 【Main Applicable Fluids】 - Water, antifreeze, LLC, ethylene glycol, various aqueous solutions, and other liquids with conductivity of 20μS/cm or higher *If you send a sample liquid, we will confirm the measurement feasibility free of charge. 【Measurement Accuracy】 ±0.8% RS (for water at 15–30°C) 【Reproducibility】 ±0.2% 【Fluid Temperature】 -20 to +70°C (Remote type: -40 to +140°C) 【Operating Pressure】 Max 1.6MPa 【Protection Rating】 IP67 【Power Supply Voltage】 19–30VDC, Power Consumption Max 200mA

• Flow Meter
• Water Hydraulic Equipment
• Flow Control

Compatible with high pressure such as hydraulic/water pressure Also supports high-temperature specifications for various performance tests and durability tests The flow monitor is a flow meter for oil that is compatible with high pressure and high temperature. The flow monitor operates by the internal magnet being pushed up by the flow of fluid, and the pointer moves in conjunction with the magnet to indicate the flow rate. Since oil does not flow directly over the scale section, it is easy to read the scale. It can be installed in any orientation, either vertically or horizontally. The standard type can handle temperatures up to 116°C, but we also offer high-temperature "H" series and ultra-high-temperature "J" series. Additionally, we have a dedicated "P" series for aircraft hydraulic fluids. The scale for oil has been pre-calibrated based on a specific gravity of 0.873 and a viscosity of 40 mm²/s, so conversion from the water scale is unnecessary. Models that accommodate both forward and reverse flow are also available. (BI) *It can also be used for water. (Water scale compatible) Please contact us for inquiries regarding transmitters.

• Flow Meter

The "OMH Series" is a screw-type volumetric flow meter compatible with a maximum pressure of 42 MPa. It is also referred to as a screw meter or helical gear meter. The movement of the rotating screw, driven by the flow of fluid, is detected by a pickup sensor and output as a pulse signal. Thanks to the precisely machined screw, it is hardly affected by the changes in viscosity due to temperature variations of the fluid, allowing for high-precision measurements across a wide range. 【Features】 ■ Supports large flow rates (Max. 3,000 L/min) ■ High-pressure compatible (Max. 42 MPa) ■ Wide measurement range (up to 1:150) ■ Wide temperature range (-20 to +200℃) ■ High precision (±0.1% R.S.) ■ Low pressure loss and low noise design *For more details, please refer to the PDF document or feel free to contact us.

• Hydraulic Equipment
• Fuel system parts
• Flow Meter

When using an ATF/CVTF oil flow meter: ■ It cannot be guaranteed that the kinematic viscosity will remain below a certain level... ■ The viscosity decreases at high temperatures... Do you have any concerns regarding viscosity or temperature? The KRAL OMG series can measure with high precision even at high temperatures (low viscosity) compared to conventional gear meters. Therefore, it is hardly affected by changes in liquid viscosity due to temperature variations. 【Examples of Applications】 ■ Fuels such as gasoline, diesel, kerosene, and heating oil ■ Oils such as hydraulic oil, lubricating oil, and ATF ■ Raw materials for urethane such as polyols and isocyanates ■ High-viscosity liquids such as inks, adhesives, sealants, PVC, and grease It can be used for almost all fluids other than water. *For more details, please contact us directly.

• Other physicochemical equipment
• Flow Control
• Hydraulic Equipment

The KRAL OMG series features a screw-type (helical gear) structure that allows fluid to flow linearly, resulting in significantly lower pressure loss compared to conventional gear meters (circular gear type), and enables high-precision measurement of ±0.1% R.S. The flow meter is calibrated at 5 mm²/s, allowing for high-precision measurement even at high temperatures (low viscosity) compared to circular gear meters. Therefore, it is hardly affected by temperature changes (changes in liquid viscosity). It can be used for a wide range of fluids, including fuels such as gasoline, diesel, kerosene, and heating oil, as well as hydraulic oils, lubricating oils, ATF, polyurethane raw materials like polyols and isocyanates, inks, adhesives, sealants, PVC, greases, and most liquids other than water. High-precision measurement of ±0.1% R.S. is possible due to the precisely machined spindle. Direction detection (forward/reverse) is also available as an option. ◎ Specifications ◎ Operating pressure: MAX 25 MPa Applicable viscosity: 1 to 1,000,000 mPas Measurement accuracy: ± 0.1% R.S. Temperature range: -40 to +200°C (Varies depending on the type of pickup sensor)

• Other physicochemical equipment
• Flow Control
• Hydraulic Equipment

The "OMG Series" screw meter volumetric flow meter has a structure that allows fluids to flow linearly, resulting in significantly lower pressure loss compared to conventional gear-type meters, and it also reduces the load inside the flow meter. The measurement accuracy is very high at ±0.1 RS, making it suitable for use as a flow reference instrument. It can measure a wide range of fluids, including high-viscosity liquids such as adhesives, sealants, PVC, and polyols, as well as low-viscosity fuels like gasoline, diesel, and kerosene. Additionally, with a variety of pickup sensors, it can accommodate a temperature range of up to -40 to 200°C. 【Do you have any of these concerns?】 - The data during high-temperature tests is poor, making accurate measurement difficult. - It breaks down quickly within 3 to 5 years due to high temperatures, necessitating replacement. - I want to measure high-viscosity fluids such as grease, adhesives, and sealants.

• Other physicochemical equipment
• Flow Meter
• Hydraulic Equipment

The "OMP Series" screw meter volumetric flow meter (for liquids) is a new series that has achieved a lower price based on the "OMG Series." It has specifications that are fundamentally equivalent to the "OMG Series," but model sizes, temperature ranges, and pressure ranges are limited. However, the measurement accuracy is the same as the "OMG Series," at ±0.1 RS, making it a highly accurate flow meter that can also be used as a reference instrument or secondary standard. It can measure a variety of fluids, including high-viscosity liquids such as adhesives, sealants, PVC, and polyols, as well as low-viscosity fuels like gasoline, diesel, and kerosene. 【Do you have any of these concerns?】 - The data during high-temperature tests is poor, making accurate measurement difficult. - It breaks down quickly within 3 to 5 years due to high temperatures, necessitating replacement. - I want to measure high-viscosity fluids like grease, adhesives, and sealants. *For more details, please download the catalog or contact us directly.

• Other physicochemical equipment
• Flow Meter
• Hydraulic Equipment

The screw meter (helical gear meter) has low pressure loss and is ideal for measuring and applying high-viscosity fluids such as epoxy, urethane, adhesives, pigments, silicone, and grease. Compared to conventional circular gear or elliptical gear types like gear meters, it is robust, resistant to foreign substances, and features a simple structure with fewer parts, making it easy to disassemble and reassemble. The OMS is made of stainless steel, allowing it to be used with water-based adhesives. ◎ Features - Low pressure loss design - Strong and durable against foreign substances - Simple structure for easy maintenance - Wide temperature range (-40 to +150°C) OMG Series Body material: Iron OMS Series Body material: Stainless steel

• Flow Meter
• Other FA equipment
• Hydraulic Equipment

This is a high-pressure flow meter compatible with MAX 42 MPa. (*For 63 MPa compatibility, please contact us for details.) Connections include SAE, DIN, G (BSPP), and others. Compared to conventional gear meters, it has lower pressure loss, which can help reduce electricity costs for motors and other equipment. It is particularly used for performance testing of high-pressure hydraulic equipment and for cylinder position detection in tunnel boring machines. It can accommodate a wide range of liquids, from high-viscosity liquids such as adhesives, sealants, PVC, inks, and polyols to low-viscosity liquids like gasoline and diesel. There are two types of traceability options: (1) ISO/IEC 17025 calibration (equivalent to JCSS) (This does not include a system diagram or calibration certificate.) (2) Attach documents such as a report, calibration certificate, and system diagram. *For details, please contact us. Calibration is performed at approximately 5 mm²/s (equivalent to diesel oil).

• Hydraulic Equipment
• Flow Meter
• Flow Control

The stainless steel screw meter OMS is a high-precision volumetric flow meter designed for water-based and aqueous fluids. ◎ Features - Wide flow range (rangeability 1:150) - Wide temperature range (-40 to +150°C) - Wide viscosity range (1 to 1,000,000 mm²/s) - High precision (±0.1%) - ISO/IEC17025 calibration compatible (optional) - Less affected by viscosity changes The OMS employs sliding bearings developed for ultra-high viscosity fluids, improving wear resistance and durability. *Please note that the standard ball bearing type differs in viscosity range, etc., so please contact us for details. It is suitable for precise application of adhesives, flow rate management, and quantitative injection or flow control of high-viscosity fluids such as polymers and resins. If you are concerned about the lifespan and maintenance of conventional gear meters, please feel free to contact us. Based on your usage conditions, we will provide data on pressure loss calculations, measurement accuracy, and durability (operating time). Significant pressure loss results in energy loss. Reducing the load on the motor can decrease power consumption. As a first step towards energy conservation, why not reduce the pressure loss of your flow meter?

• Flow Control
• Flow Meter
• Other process controls

This document is the instruction manual for the KRAL AG manufactured screw meter "OMG Series," handled by Japan Tescon Co., Ltd. It describes the structure, operation, and maintenance. The technical specifications include information on "sensor temperature range and operating pressure," as well as "model (size) capacity list," "pressure loss and operating time," and more. Additionally, it covers the installation and removal of the flow meter, identification and confirmation of faults, and handling. [Contents (excerpt)] ■ Equipment description ■ Technical specifications ■ Installation and removal of the flow meter ■ Operation ■ Maintenance *For more details, please refer to the PDF document or feel free to contact us.

• Electrical Instruments/Electrometers
• Flow Meter

This document is the instruction manual for the KRAL screw meter 'OMH Series' handled by Japan Tescon Co., Ltd. It introduces general safety instructions, product code explanations, model selection explanations, and external dimensions, among other things. [Contents] ■ Safety ■ Overview ■ Equipment Description ■ Technical Specifications ■ Installation and Removal of the Flow Meter *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Hydraulic Equipment
• Flow Control

The "TD900 Series" is a high-precision flow meter that offers high-speed calculations and high-speed output. It provides instantaneous flow output (±10VDC) for both forward and reverse flow, and in the case of the two-phase pulse input type, it can calculate pulse resolution at 1/4 through 4-fold input. It outputs flow changes with remarkable realism, tracking variations during valve opening and closing, pump startup, changes in pump discharge flow due to servo motors and inverters, and pulsating flow from piston pumps. CAN output is also available as an option. 【Features】 ■ High-speed analog output from 0.5ms ■ 2-channel analog output (W) ■ Simultaneous input/display for 2 units ■ Compliant with RoHS directives ■ Front panel IP66 *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Flow Control

Air-operated regulator for high-viscosity fluids that can reduce pressure to a liquid pressure proportional to the air supply pressure. It is ideal for pressure regulation of high-viscosity liquids such as grease, ink, paint, epoxy, and adhesives. Manual type pressure reducing valve: T-3242

• Pneumatic Equipment
• valve
• Pressure Control

Pressure regulator for high viscosity fluids, MAX 35MPa (primary pressure) pressure reducing valve, manual pressure reducing valve.

• Pressure Control
• valve
• Pneumatic Equipment

The KRAL screw meter OMG series, which can withstand high temperatures of up to 200°C, is used for performance and durability testing of automotive parts. Particularly at high temperatures, the viscosity of oil decreases, leading to significant leaks with conventional gear meters, raising concerns about accuracy at low viscosity. This is because conventional gear meters conduct flow tests at the time of shipment at viscosities of 20 to 30 mm²/s. Volumetric flow meters struggle with low-viscosity fluids and require a certain level of viscosity to ensure accuracy. The viscosity of the test fluid serves as a guideline. It is widely known that ensuring measurement accuracy and linearity becomes very difficult when the viscosity is lower than the test viscosity at shipment, which poses a challenge. Therefore, many users implement measures such as linearization corrections, especially at low viscosity and low flow rates. The KRAL screw meter is calibrated at 5 mm²/s, equivalent to diesel oil, and can be used at high temperatures without correction. KRAL is a flow meter manufacturer capable of performing ISO/IEC 17025 calibrations (ILAC MRA certification). It is also used as a standard instrument (master meter) for flow meter calibration.

• Flow Meter
• Flow Control
• Testing Equipment and Devices

This document is the instruction manual for the KRAL screw meter "OMP Series" handled by Japan Tescon Co., Ltd. It introduces the identification of safety instructions, the structure and functions of the equipment, general specifications, the temperature range of the sensors, and the operating pressure, among other details. [Contents] ■ Safety ■ Overview ■ Equipment Description ■ Technical Specifications ■ Installation and Removal of the Flow Meter *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

This document is the instruction manual for the KRAL screw meter "OME-Compact series" handled by Japan Tescon Co., Ltd. It introduces an overview, structure and function, appropriate usage conditions and environment, pressure loss, operating time, and more. [Contents] ■ Safety ■ Overview ■ Equipment Description ■ Technical Specifications ■ Installation and Removal of the Flow Meter *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Flow Control
• Hydraulic Equipment

This document is the instruction manual for the high-precision flow meter 'TD900 Series' handled by Japan Tescon Co., Ltd. It introduces the overview, names of various parts, terminal descriptions, connection methods, setting changes, functions, and more. [Contents] ■ Introduction ■ Warranty Regulations ■ Safety Instructions ■ Pre-Use Inspection ■ Overview *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

This document is the instruction manual for the high-speed digital indicator 'FM22 Series' handled by Japan Tescon Co., Ltd. It includes precautions for use, installation methods, terminal arrangements, specifications, and dimensional drawings. [Contents] ■ Precautions for Use ■ Error Display ■ Installation Method ■ Terminal Arrangement and Specifications ■ Parameter List *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This document is the instruction manual for the instantaneous measurement meter 'FM23 Series' handled by Japan Tescon Co., Ltd. It includes precautions for use, installation methods, a list of parameters, examples of settings, and test modes. [Contents] ■ Precautions for use ■ Error display ■ Installation methods ■ Terminal arrangement and specifications ■ List of parameters *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This document is the instruction manual for the 4-channel input integrator "FM34 Series" handled by Japan Tescon Co., Ltd. It introduces precautions for use, terminal arrangements, specifications, various operating methods, and how to switch functions between the counter and timer. [Contents] ■ Precautions for use ■ Error display ■ Installation method ■ Terminal arrangement and specifications ■ C: List of counter parameters *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This document is the instruction manual for the pulse isolation converter "FPC Series" handled by Japan Tescon Co., Ltd. It includes important usage notes, error displays, terminal arrangements, specifications, and a list of parameters. 【Contents】 ■ Usage Notes ■ Error Displays ■ Terminal Arrangements and Specifications ■ Operation Key Descriptions (Top of the Main Unit) ■ Parameter List *For more details, please refer to the PDF document or feel free to contact us.

• Converters and Transducers

This document is the instruction manual for the "Flow Monitor" handled by Japan Tescon Co., Ltd. It includes safety precautions, specifications, maintenance, troubleshooting, and more. [Contents] ■ Safety Precautions ■ Specifications ■ Installation ■ Maintenance ■ Troubleshooting *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The Count-On Mini, compatible with on-site displays, becomes an integrated on-site display meter when combined with screw meters OME or OMP. It also comes standard with pulse output, enabling both on-site display and remote monitoring.

• Testing Equipment and Devices
• Flow Control
• Hydraulic Equipment

The FM series digital flow meter is a pulse input type flow meter. The analog output update time is a high-speed D/A conversion of 1 msec or more.

• Flow Control
• Piping Materials
• Display

The digital display meter "MA43ES9" for strain gauge type sensors, such as load cells/load meters, torque meters/torque converters, and pressure sensors/pressure converters, is a low-cost load cell meter. It comes standard with HD (Hold Hold) and DZ (Digital Zero) inputs. You can select sample hold, peak hold, bottom hold, and P-P (Peak-to-Peak) hold. The output is 0–10VDC (1/40,000 resolution), and the output response speed is less than 5 msec. 【Specifications】 Power supply: 11–30VDC Applied voltage: 2V or 10V (depending on parameter settings) Power consumption: approximately 4.5W Dimensions: 36H × 72W × 90D Weight: approximately 200g Input method: Single-ended type Operating method: Δ-Σ conversion method *For more details, please download the PDF or feel free to contact us.

• Pressure
• Torque Meter
• Other weight measuring instruments

Are you having trouble with test data at high temperatures (low viscosity)? In circular gear-type flow meters like gear meters, linearity accuracy drastically decreases at kinematic viscosities below 20 mm²/s. This is due to a higher amount of leakage compared to screw-type or oval gear-type meters. We have received many inquiries about wanting to measure over a wide range with high precision using a single device. Among the high-precision liquid flow meters in the "OM Series," the "OMG-45, OMP-64 Series," which can handle liquid temperatures from 40 to +200°C, is a high-precision volumetric flow meter that is less affected by viscosity changes due to temperature variations and accommodates a wide temperature range. The measurement accuracy is ±0.1% R.S, and compared to other volumetric flow meters like gear meters, it has very low pressure loss and is less affected by viscosity changes due to temperature variations, allowing for highly accurate flow measurement. 【Key Features of This Product】 - Temperature range: -40 to +200°C - Measurement accuracy: 0.1% R.S - Can also be used as a master meter (standard instrument). - Measurement range is 1:150 - Flow tests and calibrations are conducted at 5 mm²/s *For more details about the product, please download and view the catalog.

• Testing Equipment and Devices
• Flow Meter

The screw meter volumetric flow meter "OMG Series" is a flow meter for liquids, designed with a structure that allows fluids to flow in a straight line. Compared to conventional gear-type flow meters, it significantly reduces pressure loss and lightens the load inside the flow meter. The measurement accuracy is very high at ±0.1 RS, making it suitable for use as a flow standard. It can measure a wide range of fluids, including high-viscosity liquids such as adhesives, sealants, PVC, and polyols, as well as low-viscosity fuels like gasoline, light oil, and kerosene. Additionally, with a variety of pickup sensors, it can accommodate a temperature range of up to -40 to 200°C. 【Are you facing any of these issues?】 - The data during high-temperature tests is not good, making accurate measurement impossible. - It breaks down quickly within 3 to 5 years at high temperatures, necessitating replacement. - There is significant pressure loss at low temperatures, making measurement impossible. - The pressure loss is too high. - I want to measure high-viscosity fluids such as grease, adhesives, and sealants. *For more details, please download the catalog or contact us directly.*

• Other physicochemical equipment
• Flow Meter
• Hydraulic Equipment

OME is a low-pressure model of the economy type. To achieve cost reduction and a low price, the main body material is aluminum, and the detection method and number of parts have been reduced. Although the output pulse has decreased, the internal spiral gear is the same as that used in OMG, maintaining high precision of ±0.1% R.S. A new amplifier box has been added, integrating a 2-phase 90° phase difference pulse (PNP) and a temperature sensor Pt100Ω. With 4-fold input, calculations can be performed with 1/4 pulse resolution, simplifying wiring compared to conventional types. It is lightweight and compact, making it ideal for measuring fuel consumption in various engines, and is also used for performance testing of fuel pumps. It is designed for intrinsically safe explosion-proof use as well. ≪Features≫ Lightweight and compact aluminum body Ideal for fuel consumption measurement High precision (±0.2% R.S.) at a low price ≪Materials≫ Main body: Aluminum (3.0615) Spindle: Hardened steel (1.0737) Bearing: Steel/Stainless steel O-ring: Viton, EPDM

• Flow Meter

The screw meter volumetric flow meter "OMP Series" is a new series that has achieved a lower price based on the "OMG Series." Its specifications are fundamentally equivalent to those of the "OMG Series," but it has limited model sizes, temperature ranges, and pressure ranges. However, the measurement accuracy is the same as the "OMG Series," with a very high precision of ±0.1RS, making it suitable for use as a reference instrument or secondary standard instrument. The compatible fluids include not only high-viscosity liquids such as adhesives, sealants, PVC, and polyols, but also low-viscosity liquids such as gasoline, light oil, and kerosene. 【Do you have any of these concerns?】 - The data during high-temperature tests is poor, making accurate measurement impossible. - They break down quickly within 3 to 5 years due to high temperatures, necessitating replacement. - I want to measure high-viscosity fluids like grease, adhesives, and sealants. *For more details, please download the catalog or contact us directly.

• Other physicochemical equipment
• Flow Meter
• Hydraulic Equipment

The screw meter OME, using spiral gears, is a high-precision flow meter with an accuracy of ±0.1% RS. Since it is a volumetric type, it is less affected by changes in fluid viscosity due to temperature variations. However, an optional temperature sensor can be attached to the OME, allowing for temperature compensation to further improve accuracy. Additionally, being a volumetric type, it does not require straight pipe sections at the inlet/outlet of the flow meter. By using an aluminum body, it achieves a compact and lightweight design, making it suitable for installation in limited spaces such as engine compartments. 【Features】 ■ Explosion-proof design with intrinsic safety using Namur sensors ■ Flow range: 0.1 to 525 l/min (4 models) ■ Operating temperature: 0 to 80℃ ■ Operating pressure: Max 4MPa ■ Measurement accuracy: ±0.1% R.S. (1:10 range) ■ 90° phase difference pulse output for two-phase (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Instrumentation and Control Systems

OME is a helical gear type volumetric flow meter, a screw meter. It has an aluminum body, featuring a lightweight and compact design. The measurement accuracy is ±0.3% RS (1:150), providing high precision. The 1:10 range (from 1/10 of F.S.) has linearity of ±0.1%. It also supports calibration in accordance with ISO/IEC 17025 ILAC MRA (JCSS mutual recognition).

• Mixer/agitator

The sophisticated design makes the main unit compact and lightweight, making installation, maintenance, and inspection extremely convenient.

• Other pumps

Common pressure: 29.4 MPa Water-cooled 4-stage compression Maximum discharge capacity: 2.74 m³/min

• Other pumps

- We offer products that comply with the High-Pressure Gas Safety Act (KHK certification)!! - With excellent quietness and low vibration performance, it can be installed in various locations. - A wide variety of options to choose from according to your application. - Widely used for pressure and performance testing of respiratory equipment and automotive brake components, etc. - We handle applications to the prefecture after installation, as well as piping work and control components! - As a reliable domestic compressor, we provide quick after-sales service. We conduct open inspections in accordance with domestic regulations. - A variety of options to enhance operability and safety.

• Forging Machine

Have there been any instances where the silencer (muffler) used for high-pressure air exhaust has burst or flown away? If it is a silencer with a relief valve, it can safely release the internal pressure that may rise due to blockages, allowing for safe exhaust. We offer various sizes ranging from 1/8B to 2B.

• valve

The maintenance of the cleaning agent is an economical and simple method that only involves replacing the cleaning agent. Depending on the application, the optimal cleaning agent can be selected from options such as activated carbon, activated alumina, and synthetic zeolite. You can leave the installation, piping work, and high-pressure gas application to us.

• others

Application for High-Pressure Gas Manufacturing Permit Notification of High-Pressure Gas Manufacturing Business Application for Changes to High-Pressure Gas Manufacturing Facilities Notification of Minor Changes to High-Pressure Gas Manufacturing Facilities Notification of Changes to High-Pressure Gas Manufacturing Facilities Notification of Discontinuation of High-Pressure Gas Manufacturing We will act on your behalf to prepare documents related to the High-Pressure Gas Safety Act, such as pre-completion inspection materials.

• others

We will design and manufacture pressure vessels and accumulators in accordance with the High-Pressure Gas Safety Act, along with the specific equipment inspection certificate based on SUS304. We also provide support for installation, piping, and applications as per your requests. Please leave regular inspections such as open inspections and thickness measurements to us.

• others

We will issue an inspection report along with a pressure gauge certificate with traceability as the standard.

• Other services

The 44-1300 series is a pressure reducing valve that can safely reduce pressure from up to 31.0 MPa to below 10.3 MPa at a high flow rate. It features a partition plate built into the lower part of the sensor, preventing hunting, and a balanced main valve that provides stable secondary pressure. This regulator comes standard with a vent valve that allows for pressure relief in a piping system with a closed end. There is also a non-vent option available for hydraulic systems. *For more details, please download the catalog or contact us directly.*

• Pressure Control