アドバンテック東洋 List of Products and Services

● You can easily set up program operation. After the operation ends, rapid cooling can be achieved by using cooling. ● During program operation, the operating status (temperature rise, fall, control) is displayed. ● In addition to the safety device included with the temperature controller, an independent thermal protection device is equipped to monitor and prevent overheating of the unit in a dual manner. ● The door can be configured to open to the left (standard specification) or to the right, so please specify your preference when placing your order.

• Drying Equipment

Constant Temperature Drying Oven DRN Series ● Easy to set up program operation. ● During program operation, the operating status (temperature rise, fall, control) is displayed. ● In addition to the safety device included with the temperature controller, an independent overheat prevention device with a thermal sensor is equipped to monitor and prevent overheating of the unit in a dual manner. ● The door can be selected to open left (standard specification) or right, so please specify your choice when ordering. Inquire about delivery times. Constant Temperature Drying Oven DRA Series ● Capable of operation at a maximum temperature of 300°C with simple operation. ● Timer operation can be set. ● In addition to the safety device included with the temperature controller, an independent overheat prevention device with a thermal sensor is equipped to monitor and prevent overheating of the unit in a dual manner. ● The door can be selected to open left (standard specification) or right, so please specify your choice when ordering. Inquire about delivery times.

• Drying Equipment

This is the housing for cartridge filters. We offer a variety of housings tailored to filtration purposes and conditions. Please feel free to introduce us.

• Other physicochemical equipment

- The air jacket heating method ensures excellent uniformity of the internal temperature. - The double-door structure with a reinforced glass inner door allows for observation of the interior without disturbing the internal temperature. - In addition to the safety device included with the temperature controller, an independent thermal overload prevention device is equipped to monitor and prevent overheating of the unit in a dual manner. - Program operation can be easily set up. (TVN series) - The door can be specified to open to the left (standard specification) or to the right, so please indicate your preference when placing your order.

• Other physicochemical equipment

● It is equipped with a water level controller that automatically supplies water. The water level can be adjusted as desired, and it can also be conveniently used during drainage. ● It is equipped with an overheating prevention device.

• Other physicochemical equipment

This is a clean cartridge filter made of nylon membrane material, which has excellent chemical resistance. Since the media itself is hydrophilic, there is no need for pre-wetting with alcohol or other substances for filtering aqueous solutions. 【Features】 ■ Hydrophilic Media There is no need for pre-wetting with alcohol or other substances even when filtering liquids with high surface tension, such as water, which can lead to a reduction in the amount of waste liquid during the initial filtration of chemicals and improve work efficiency. ■ High Cleanliness The media itself is hydrophilic and does not contain wetting agents, resulting in excellent cleanliness. Additionally, all products undergo flushing with ultra-pure water before shipment, ensuring extremely low levels of elution and excellent cleanliness even for PGMEA used in the electronics industry. ■ High Reliability All products have undergone integrity testing, making this a highly reliable cartridge filter. *For more details, please contact us.

• Solid-liquid separation filter

This is a cartridge filter made of PTFE membrane filter and polypropylene or polyethylene, featuring chemical resistance. 【Features】 - The PTFE membrane filter does not use surfactants. The filter seal is thermally fused, making it a clean cartridge filter. - The TCF-020L type is a low elution cartridge filter composed solely of PTFE and high-density polyethylene. - All products have undergone integrity testing, ensuring high reliability. - By offering the TCF-020L with an effective filtration area 2.3 times larger (compared to the conventional TCF-020) and the TCF-050L with an effective filtration area 2.5 times larger (compared to the conventional TCF-050), we have achieved lower resistance and longer lifespan. *For more details, please contact us.

• Separation device

This filter is suitable for filtering amorphous foreign substances that tend to cause clogging with conventional filters. 【Features】 - Less prone to clogging even with amorphous foreign substances - The pleated structure has a large filtration area, significantly reducing pressure loss compared to conventional depth cartridge filters - Although the effective filtration area is reduced compared to conventional PP pleated cartridge filters, the depth effect achieves high particle capture efficiency with low pressure loss - A reliable cartridge filter that adopts particle capture performance indicators - The filter is formed from melt-bonded polypropylene filaments, resulting in minimal fiber shedding - Excellent chemical resistance, suitable for use with acids, alkalis, and many organic solvents *For more details, please contact us.

• Other polymer materials

This is an all-polyethylene cartridge filter developed for resist filtration in the electronic industry, such as semiconductors and liquid crystal displays. 【Features】 - It is a low-elution cartridge filter made entirely of polyethylene. - It employs a membrane filter with an extremely sharp pore size distribution, achieving higher filtration accuracy compared to conventional PTFE membranes. - It also exhibits excellent cleanliness against organic solvents used in the electronic industry. *For more details, please contact us.

• Other polymer materials

The filter has a high void ratio and a structure where the pore diameter decreases from the outside to the inside, allowing for a long filtration lifespan. The material is composed entirely of polypropylene, which has excellent chemical resistance and can be used with acids, alkalis, and many organic solvents. Since the filter is laminated with melt-bonded polypropylene filaments, there is almost no fiber shedding. For more details, please refer to the PDF document or feel free to contact us.

• Solid-liquid separation filter

This is a cartridge filter composed of carefully selected polyether sulfone membrane filters and polypropylene, resulting in minimal leaching of substances. The filter has a high porosity and a two-layer structure with different pore sizes, allowing for low resistance, high efficiency, and a long filtration lifespan. Since the media is inert, there is almost no adsorption of the components of the filtered liquid. All products have undergone integrity testing, making this a highly reliable cartridge filter. For more details, please refer to the PDF document or feel free to contact us.

• Separation device

The TCP type is formed from melt-bonded polypropylene filaments, with minimal fiber detachment or leaching. Since the material is entirely polypropylene, it can be used with acids, alkalis, and many organic solvents. The high porosity of the filter and the wide effective filtration area of 4,200 cm² to 6,200 cm² per 250 mm type increase the amount of particulate matter collected, resulting in a long filtration lifespan. For more details, please refer to the PDF document or feel free to contact us.

• Solid-liquid separation filter

This is a cartridge filter made of PTFE membrane and composed of polypropylene or polyethylene, featuring excellent chemical resistance. The PTFE membrane filter does not use surfactants. Additionally, the filter seals are thermally fused, making it a clean cartridge filter. All products have undergone integrity testing, ensuring a highly reliable cartridge filter. The TCF-020L offers an effective filtration area 2.3 times larger than the conventional TCF-020, and the TCF-050L has an effective filtration area 2.5 times larger than the conventional TCF-050, achieving high flow rates and extended lifespan. For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

The TCP-V type is formed from melt-bonded polypropylene filaments, with almost no fiber detachment or leaching. Since the material is entirely polypropylene, it can be used with acids, alkalis, and many organic solvents. Compared to the TCP type, it has improved the filtration speed of high-viscosity liquids by about 30% while maintaining equivalent particle capture performance. For more details, please refer to the PDF document or feel free to contact us.

• Solid-liquid separation filter
• Filtration Equipment
• Beverage Production Equipment

This is a general-purpose cellulose mixed ester type filter, widely used for particle removal and filtration sterilization. The surface is plain white, and it is available in nine types with pore sizes ranging from 0.10 to 5.00 μm. It is widely used in various testing fields, as well as in industrial filtration areas such as pharmaceuticals, beverages, brewing, and chemicals. 【Features】 ■ Autoclave sterilization and ethylene oxide gas sterilization are possible. ■ Inactive to microorganisms, it does not affect the growth of colonies. ■ It has good permeability for culture media, making it suitable for microbial cultivation. *For more details, please download the PDF or feel free to contact us.

• Other laboratory equipment and containers

Due to its excellent strength, it is easy to handle when setting the filter in the filtration device, and it can withstand autoclave sterilization, ethylene oxide gas sterilization, and dry heat sterilization (180°C). Because the material is inert, components of the filtrate such as proteins are rarely adsorbed onto the filter. Compared to cellulose mixed ester types, it has resistance to alcohols. 【Features】 ● It is used for particle removal from water and alcohols, microbial removal, and filtration sterilization. ● It has excellent characteristics such as low adsorption to the filter and suitability for use in alcoholic aqueous solutions. *For more details, please download the catalog or feel free to contact us.

• Other laboratory equipment and containers

Due to its excellent chemical resistance, it is not affected by most acids, alkalis, and organic solvents. It also possesses many characteristics such as uniformity, surface wettability, and fiber non-detachability. It can be used in a temperature range of -120°C to 260°C and is capable of sterilization using steam, autoclave, and ethylene oxide gas. Because it has water-repellent properties, it does not allow oil and organic solvents to pass through while being impermeable to water. It does not degrade or change under a wide range of conditions and is hardly affected by ultraviolet light. Its low friction properties provide non-stick and peel-off characteristics, making it easy to remove filtration residues from filters. 【Features】 ● Due to its excellent chemical resistance, it is used for the removal of particles from organic solvents, acids, and alkalis, as well as for gas filtration. ● There are supported PTFE types backed with polypropylene net for ease of handling, as well as hydrophilic PTFE types that can be used with both aqueous and organic solvents. *For more details, please download the catalog or feel free to contact us.

• Separation device

It is easy to filter sterilize small amounts of solutions and perform particle removal filtration.

• Other polymer materials

It is easy to filter sterilize small amounts of solutions and remove particles.

• Other polymer materials

● For the IN and OUT connections, sanitary ferrules are used, allowing for the installation of a housing between the straight pipe sections. ● Filter sizes for 250mm type, 500mm type, and 750mm type are available, and models can be selected to accommodate filters of various shape codes. ● Made of SUS304.

• others

●KS-25F・47F: This is a filter holder designed to be set at the end of an ampoule filling device for injection solutions and the like. The KS-47F is equipped with a vent valve to remove residual air within the holder. Dedicated stands for 6 or 10 units can also be prepared according to the number of fillings. ●KS-47: This is a stainless steel filter holder that is effective for clarifying liquids with relatively low capacity, filtering sterilization, or gas clarification, and is excellent in pressure resistance, heat resistance, and durability. It is equipped with a vent valve to expel air in the piping that could adversely affect filtration. To ensure that air can be expelled from the holder regardless of whether it is used vertically or horizontally, the ceiling on the primary side is inclined. To facilitate easy use in the laboratory, the holder itself is designed with a groove for clamping.

• filter

It is used for filtration sterilization and clarification of liquids and gases through pressure filtration. The support screen is coated with PTFE, allowing for autoclave sterilization while the filter is in place.

• Filtration Equipment

The "DRV Series" is a vacuum constant temperature dryer that safely performs vacuum drying by installing a heater on the outside of the interior, heating through radiation from the interior walls. It features a large reinforced glass window for easy observation of the interior, along with a polycarbonate protective plate mounted on the outside. In addition to the safety device included with the temperature controller, it is equipped with an independent overheat prevention device that uses a thermal sensor to monitor and prevent overheating of the unit in a dual manner. We offer a lineup that includes the vacuum constant temperature dryers "DRV622DC and 623DC," as well as the large-capacity, floor-standing vacuum dryer "DRV823FB." 【Features】 ■ Heating through radiation from the interior walls ■ Large reinforced glass window for easy observation of the interior ■ Polycarbonate protective plate mounted on the outside of the window ■ Easy programming for operation settings ■ Left-opening (standard specification) and right-opening (reverse) models can be custom-made *For more details, please refer to the PDF materials or feel free to contact us.

• Drying Equipment

It is possible to avoid filter contamination during microbial testing (membrane filter method), which also improves work efficiency.

• Other physicochemical equipment

【Features】 ● Made of polystyrene, it consists of a main body, lid, and ring, making it suitable for observing and storing filters with a diameter of 47 mm. ● By setting the ring, it prevents the filter from warping, and since the container does not condense even when the filter is wet, it is very convenient for observation under a microscope. ● The lid can be set to allow for the storage of the filter. ● Set the membrane filter so that the observation surface is facing upwards in the main body. ● As shown in Photo 1, by setting the ring on the main body, it prevents warping of the membrane filter, and since it does not condense even when the membrane filter is wet, it makes observation with a microscope easier. ● As shown in Photo 2, by setting the lid instead of the ring, it prevents the membrane filter from drying out and allows for the storage of the observed specimen.

• Other physicochemical equipment
• Other laboratory equipment and containers

【Features】 ● A high-performance, large-capacity type with excellent usability and operability, with purification speeds of 25L/h and 100L/h (at water temperature 25℃). ● The separate tank for storing ion-exchanged water achieves high light-blocking properties. ● Available in three capacities: 30L, 60L, and 100L, allowing selection based on water usage. *For more details, please download the PDF or feel free to contact us.

• Pure water production equipment

It is used in a wide range of fields such as general chemical analysis, precise analysis, and reagent preparation. 【Features】 ● A movable water sampling unit equipped with a large LCD. Achieves high visibility and smart water sampling with a 7-inch touch panel and electrostatic touch dial. With magnetic attachment, it can be positioned freely according to the application and installation location. ● Compact & Maintenance-friendly. By reducing the depth compared to our conventional products, it achieves a space-saving installation area, making it suitable for personal use. The adoption of front access and display indications for maintenance methods allows for easy replacement of consumables and frequently replaced parts. ● Four models are available as needed: standard type, UV lamp for organic matter decomposition, TOC meter, and a model with both UV lamp and TOC meter. ● The TOC meter adopts a continuous measurement method. It can measure with stable accuracy without contamination. ● Designed with ease of use in mind. It features a color LCD display that clearly shows water quality (specific resistance, TOC), operating status, tank water level, operation history, etc., in kanji. ● Water sampling volume settings and operations are performed using a touch hole dial, which can shorten the time required for sampling.

• Pure water production equipment

Three types are available according to the usage of ultrapure water: standard type, UV lamp for organic matter decomposition, and one with UV lamp and UF (ultrafiltration) membrane.

• Pure water production equipment

The trap temperature will be displayed, allowing you to know the timing for starting the vacuum pump, which prevents the suction of moisture inside devices such as vacuum dryers and freeze dryers.

• Cooling system

The vacuum level, trap cooling temperature, and time are displayed together, allowing you to confirm the operating status. 【Features】 ● In auto mode operation, it determines the trap cooling temperature and vacuum level to indicate when the sample can be mounted. ● By using an external power supply, the vacuum pump does not automatically restart after a power outage, preventing samples that have melted due to the outage from boiling over and scattering. ○ For more details, please contact us or download the catalog.

• Drying Equipment

Equipped with an air filter that captures over 99.97% of 0.3μm particles. 【Features】 ● Equipped with a HEPA filter and sterilizing lamp, allowing instruments to be dried and stored in a Class 1,000 clean environment. ● Uses a multi-range timer for the sterilizing lamp, enabling time settings tailored to the customer's usage time (from 1 minute to 60 hours). ○ For more details, please contact us or download the catalog.

• Drying Equipment

Equipped with a variety of fractionation modes, it is compatible with a wide range of fractionation containers. 【Features】 ● Compatible with all liquid chromatographs from open columns to HPLC. ● The fractionation nozzle moves with high precision and speed. ● With a variety of fractionation modes available, it can fractionate the required liquid volume in the optimal way. ● Many optional accessories are available, providing excellent expandability. ○ For more details, please contact us or download the catalog.

• Analytical Equipment and Devices
• Other physicochemical equipment
• others

The rack has an incline, which enhances visibility and operability. 【Features】 ● Drainage liquid is collected in the collection space within the rack. ● The standard test tube rack can accommodate up to 100 test tubes with an outer diameter of 12mm to 15mm and a length of 90mm to 120mm. ● By using a separately sold adapter, it is also possible to accommodate 4mm vials, 96-well microplates, and Eppendorf tubes. ○ For more details, please contact us or download the catalog.

• Analytical Equipment and Devices
• Other physicochemical equipment
• others

The test rack can be moved, allowing it to be used with fixed open columns. 【Features】 ● The fractionation section uses a load cell for electronic balances, enabling precise weighing. ● It is possible to select fractionation by weight or by time. Additionally, using one for monitoring can prevent liquid leakage accidents caused by changes in dissolution rate or viscosity. ● The weighing section features a digital display, and the fractionation weight and time can be set via key operations on the control panel. ● The test tubes and fractionation valves are made of ultra-hard glass, while the test tube rack is made of polypropylene resin. ● It is equipped with an overload prevention function that automatically stops the motor when excessive load is applied and alerts with a buzzer. ○ For more details, please contact us or download the catalog.

• Other inspection equipment and devices
• Other physicochemical equipment

It is possible to operate at a maximum temperature of 270°C (DRN) / 300°C (DRA). In addition to the safety device included with the temperature controller, an independent thermal protection device is equipped to monitor and prevent overheating of the unit in a dual manner. The door can be configured to open to the left (standard specification) or to the right, so please inquire. *For more details, please download the PDF or feel free to contact us.*

• Drying Equipment

With simple operations, it can operate at a maximum temperature of 270°C. By blowing and circulating heated air, it enables rapid and uniform heating. 【Features】 ● In addition to the safety features equipped in the temperature controller, it is equipped with an independent overheat prevention device that uses a heat-sensitive mechanism to monitor and prevent overheating of the device in a dual manner. ● DRM Series Equipped with an observation window that helps observe the samples during the drying process, a door switch that cuts off the heater circuit when the door is opened during operation for safety, and allows for easy setting of program operations. ● DRS Series Easy to operate and allows for timer operation settings. ○ For more details, please contact us or download the catalog.

• Drying Equipment

Air is blown horizontally for heating, allowing for rapid and high-temperature heating. Depending on the intended use, you can select between exhaust and circulation by switching the damper. A timer operation can be set. After operation, cooling can be quickly performed using a cooling function. In addition to the safety device included with the temperature controller, an independent heat prevention device with a thermal sensor is equipped to monitor and prevent overheating of the unit in a dual manner. *For more details, please download the PDF or feel free to contact us.

• Drying Equipment

Equipped with double doors that open like a folding screen, it excels in workability and is advantageous for installation. 【Features】 ● In addition to the safety features equipped with the temperature controller, it has a thermosensitive independent overheating prevention device that monitors and prevents overheating of the unit in a dual manner. ● Program operation can be easily set. After operation ends, rapid cooling can be achieved using a cooling timer. It also has excellent temperature distribution. ○ For more details, please contact us or download the PDF.

• Drying Equipment

It can be set to a wide temperature range from [room temperature + 50℃] to 500℃ (700℃), making it suitable for various purposes such as heat resistance testing, sintering, and annealing. 【Features】 ● The insulation structure is designed to seal the door area without cooling water, making maintenance easy. ● In addition to the safety features built into the temperature controller, it is equipped with a thermosensitive independent overheating prevention device that monitors and prevents overheating of the unit in a dual manner. ● Timer operation and program operation can be easily set. After operation ends, rapid cooling can also be achieved using a cooling timer. ● Custom manufacturing is available upon request, so please inquire. ○ For more details, please contact us or download the catalog.

• Drying Equipment
• Testing Equipment and Devices

Water droplets falling from the glass apparatus collect in the water receiving tray at the bottom. 【Features】 ● In addition to the safety device equipped with the temperature controller, an independent overheating prevention device is installed to monitor and prevent overheating of the apparatus in a dual manner. ● The large drying window makes it easy to observe the drying condition. ● The door can be selected to open to the left (standard) or to the right, so please specify your choice when placing your order. ○ For more details, please contact us or download the catalog.

• Drying Equipment

A heater is installed on the outer side of the interior, allowing for heating through radiation from the interior walls, enabling safe vacuum drying. 【Features】 ● It has a large reinforced glass window for easy observation of the interior, with a polycarbonate protective plate mounted on the outside. ● By providing a nozzle and valve for gas replacement, the atmosphere inside the chamber can be replaced with nitrogen or argon. ● Timer operation, program operation, and weekly timer operation can be easily set. ● In addition to the safety device included with the temperature controller, an independent overheat prevention device with a thermal sensor is equipped to monitor and prevent overheating of the device in a dual manner. ● The door can be made to open left (standard) or right (reverse) as a custom option, so please specify your preference when ordering. ○ For more details, please contact us or download the PDF.

• Drying Equipment

Adopting an easy-to-operate digital temperature controller. By simply setting the temperature, it allows for constant operation and timer operation with high-precision temperature control. 【Features】 ● The heater and the ceramic fiber furnace body are molded as a single unit, resulting in minimal heat loss and excellent durability of the heater. ● It is equipped with safety features such as a self-diagnostic function including a door switch, overcurrent and leakage breakers, and a cooling fan to suppress temperature rise on the exterior surface. ○ For more details, please contact us or download the catalog.

• Electric furnace

The digital temperature controller, which is easy to operate and equipped with various useful features for work such as fixed value operation, a program operation of up to 100 steps, a weight function, a repeat function, and communication functions, is adopted. 【Features】 ● It uses a unit-type insulation plate that integrates the heater with ceramic fiber, providing superior durability compared to exposed heating plates. Additionally, the replacement work is simple in case of heater disconnection, making maintenance and repair easy. ● In the event of a problem with the device, it displays the trouble content and puts the heater in a stopped state. Furthermore, it is equipped with safety features such as a cooling fan that suppresses the rise in surface temperature during high-temperature use. ○ For more details, please contact us or download the catalog.

• Electric furnace

In addition to models that perform constant temperature operation, there are models capable of programmed operation, offering a wide variety of options. 【Features】 ● The heating plate unit, which integrates a heater and a ceramic fiber insulation board, is arranged on all four sides (top, bottom, left, right) of the furnace body, allowing for rapid heating. ● The control panel is separated from the furnace body, enabling operation from a location away from the furnace. ○ For more details, please contact us or download the catalog.

• Electric furnace

This is a practical high-temperature electric furnace for the food-related field, chemical industrial products field, and environmental analysis field. 【Features】 ● The control unit is separated from the furnace body, allowing operation from a location away from the furnace. ● The easy program controller type can be connected to a computer (requires separately sold electric furnace communication software and communication converter), enabling program settings and temperature data storage on the computer. ● With the communication expansion cable (sold separately), it is also possible to monitor multiple electric furnaces. *For more details, please download the PDF or feel free to contact us.

• Electric furnace