アドバンテック東洋 List of Products and Services

There are a total of 9 models available, with 3 models for maximum operating temperatures (1,400°C, 1,500°C, and 1,600°C) and 3 models based on furnace dimensions, offering a wide variety. 【Features】 ● It reaches the maximum operating temperature in about 15 minutes. ● The heater does not require an inert gas atmosphere even at high temperatures. ● The furnace body uses alumina fiber, providing excellent thermal insulation. ● The control panel is separated from the furnace body, allowing operation from a distance. ○ For more details, please contact us or download the catalog.

• Electric furnace

Vacuum, inert gas replacement furnace, and heat treatment with gas flow are available. 【Features】 ● The heater is installed inside the vacuum chamber, allowing for rapid heating. ● Equipped with an oil rotary vacuum pump, digital vacuum gauge, and recorder as standard. ● The door can be made to open to the left (standard) or to the right as a custom option, so please specify your preference when ordering. ○ For more details, please contact us.

• Electric furnace

Equipped with program operation (1 pattern, 2 steps). It can automatically perform reactions → inactivation, reactions → preservation, etc., allowing for effective use of research time. 【Features】 ● By using a sample temperature sensor (sold separately), sample temperature can be managed more accurately. ● The type with a temperature range of 4°C to 100°C is ideal for enzyme reactions, constant temperature maintenance, etc. ● The type with a temperature range of [room temperature + 5°C] to 200°C is ideal for hydrolysis, synthesis reactions, etc. ○ For more details, please contact us or download the catalog.

• Heating device

Since there is no refrigeration unit, it does not use Freon and has no vibrations. 【Features】 ● It has a built-in 5L water tank, making it easy to refill water. ● It is equipped with a measurement hole on the left side of the main unit, allowing for temperature and humidity measurement inside the chamber and wiring to samples inside. ● By using a dedicated stand, the THR030FA can be stacked in three tiers, while the THR040FB and THR050FB can be stacked in two tiers.

• Environmental Test Equipment

The observation window is located at the front and back of the tank, making it convenient for sample observation. 【Features】 ● Timer operation is possible. ● A large-capacity type is also available. ● Equipped with a thermal protection device and a temperature controller, it prevents overheating with a dual safety mechanism through self-diagnosis. ○ For more details, please contact us or download the catalog.

• Thermostatic water bath
• Thermostatic chamber

It is a cooling water circulation device for an external sealed system with high cooling capacity.

• Other physicochemical equipment

You can choose between rectangular and round liquid tank types according to your needs. 【Features】 ● It comes with a convenient handle for portability. ● The control unit can be removed, making it easy to clean the liquid tank. ● It uses a durable stainless steel pipe heater. ● It is equipped with a dry burn prevention device and an overcurrent protection fuse. ● You can select a microcomputer PID control temperature regulator type with excellent temperature control accuracy. ○ For more details, please contact us.

• Thermostatic water bath

You can choose between rectangular and round liquid tank types according to your needs. 【Features】 ● It comes with a convenient handle for portability. ● The control unit can be removed, making it easy to clean the liquid tank. ● It uses a durable stainless steel pipe heater. ● It is equipped with an independent overheat prevention device and an overcurrent protection fuse. ● You can select a microcomputer PID control temperature regulator type with excellent temperature adjustment accuracy. ○ For more details, please contact us.

• Thermostatic chamber

By performing shaking culture while maintaining a constant temperature environment for the culture block equipped with optical measurement functions, the growth curve of microorganisms can be obtained. 【Features】 ● Up to 6 units can be connected, allowing for the measurement of absorbance for 36 samples, and by connecting to a computer, it is possible to graphically display and save the measurement values. ○ For more details, please contact us or download the catalog.

• Vibration Testing
• incubator

Due to the air jacket heating method, it excels in temperature uniformity inside the chamber. 【Features】 ● The double-door structure with a reinforced glass inner door allows for observation of the interior while minimizing rapid temperature changes. ● In addition to the safety features equipped in the temperature controller, an independent overheat prevention device with a thermal sensor is installed to monitor and prevent overheating of the device in a dual manner. ○ For more details, please contact us or download the catalog.

• incubator
• Thermostatic chamber

In addition to the safety device equipped with the temperature controller, an independent heat prevention device with a thermal sensor is installed to monitor and prevent overheating of the device in a dual manner. 【Features】 ● Equipped with a tray to catch small droplets of water falling from the appliance. ● Available in a practical type with easy operation and timer function, as well as a type with programmable operation. ● The door can be selected to open left (standard) or right, so please specify your preference when ordering. ○ For more details, please contact us or download the catalog.

• Sterilizer
• Drying Equipment

During sterilization, and even if it stops partway, it is equipped with a double interlock mechanism that detects the internal pressure and temperature of the can and locks the lid, enhancing safety. 【Features】 ● The lid unlocking temperature can be set in the range of 60°C to 97°C for each course and memory number, improving safety and convenience when retrieving sterilized items. ● A large operation panel has been adopted, allowing for easy visibility of the progress through official displays, and the selected course based on the sterilized items is also indicated by lamps on the panel. Each switch and display has been enlarged, making it even easier to use. ● To shorten cooling time, a cooling fan is standard equipment. ○ For more details, please contact us or download the catalog.

• Autoclave

【KGS-04】This is used for tests such as the insoluble particulate matter test for small-volume injectable preparations and single-dose packaged eye drops in the pharmacopoeia. It is used when the effective filtration area is small at 0.13 cm² and when the amount of particulate matter and sample volume are minimal. 【KG-25/KGS-25】This is used for microbiological tests, particulate tests, etc. It is used when the sample is small or when filtration with a small filtration area is required. 【KG-47/KGS-47・47-TF】This is used for microbiological tests, particulate tests, etc. The effective filtration area is designed so that the mesh of the membrane filter with grid lines (3.1 mm spaced grid) has 100 squares. KGS-47-TF is coated with PTFE on the bottom surface of the funnel to prevent the filter from sticking to the glass surface even when sterilized in an autoclave with the filter set in place. 【KG-90/KGS-90】This is used when filtering relatively large amounts of liquid.

• Glassware and containers

●This is a stainless steel housing for a single unit with a center post structure consisting of two parts: the head and the body. ●By removing the bag nut on the top of the head, the filter can be easily replaced. ●The filter can be replaced while still connected to the piping.

• others

● This is a stainless steel housing consisting of two parts: the head and the body. ● The head and body are sealed by a clamp, making filter replacement easy. ● It allows for precise filtration using various membrane filters. ● With fewer parts and a simple structure, it is an inexpensive, lightweight, and easy-to-handle product. ● Being a lightweight housing, it is suitable for integration into cleaning machines and other equipment.

• others

● By removing the body clamp, it can be separated into two parts: the body and the base, and the internal parts are mostly detachable. ● Types for filter dimensions of 250mm, 500mm, and 750mm are available, allowing you to choose models that can accommodate various shapes of filters. ● Made of SUS304.

• others

【Features】 ● The luer fitting design allows for easy attachment and detachment to a syringe (luer lock syringe). ● This small-capacity pressure holder is suitable for autoclave sterilization and is used for filtering small volumes such as eye drops and serum, as well as HPLC samples. ● The KS-25RA is used for removing ultra-fine particles contained in photoresist for applying silicone wafers and glass mask processors. *For more details, please download the PDF or feel free to contact us.

• Stainless steel utensils and containers

● KP-47H: A vacuum filtration device consisting of a 300 mL graduated funnel, support screen, O-ring, rubber stopper, and base. ● KP-47U: A type that adds a funnel cover, rubber cap, and a 13 mm diameter air vent DISMIC (13JP050AN, 5 pieces) to the KP-47H, creating a closed system on the filtration primary side. ● KP-47W: A vacuum filtration device equipped with a 500 mL graduated funnel, with the same configuration as the KP-47H. ● KP-47S: A microbiological testing unit that includes a 300 mL graduated filtrate receiving flask added to the KP-47U. It can be easily set directly into the filtrate receiving flask and is sealed with an O-ring, making the entire filtration system a closed system, thus avoiding cross-contamination between the original solution and the filtrate with the outside. The flask comes with a flask cover, allowing for direct cultivation tests. ● KP-47T: A vacuum filtration device equipped with an 800 mL graduated funnel, with the same configuration as the KP-47H. This type has increased height while maintaining the outer diameter of the 500 mL type funnel for the KP-47W, thereby increasing its capacity.

• Plastic utensils and containers