藤川伝導機 List of Products and Services

We would like to introduce our aluminum hex socket bolt 'SVSA' with a gas vent hole. The gas vent hole facilitates the discharge of gas that accumulates at the bottom of the screw holes in equipment and devices, supporting the vacuuming of vacuum systems. It is suitable for fastening aluminum alloy materials. Additionally, we also handle hex socket ultra-low head bolts "SVSHL," hex socket bolts with integrated washers "SVSI1S," and washers "SWAS-VF." 【Lineup】 ■SVSA-M3 ■SVSA-M4 ■SVSA-M5 ■SVSA-M6 ■SVSA-M8 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our hexalobular hole-equipped ultra-low head bolts (inch screws) 'SET-TZB(INCH)/SETS(INCH)'. The head height is all below 1mm (0.04in). They are suitable for space-saving in equipment and devices or in areas with limited upper space. We can manufacture products with special specifications such as gas relief holes, nylon welding, clean washing, and special packaging. Additionally, we also handle hexalobular short bits "SKXB." 【Material & Finish】 ■SET-TZB(INCH) - Steel with trivalent chromate treatment ■SETS(INCH) - SUSXM7 (equivalent to SUS304) *For more details, please download the PDF or feel free to contact us.

We would like to introduce our embedded washer cross-recessed pan head screw 'SNPI3S'. This is a stainless steel embedded washer cross-recessed pan head screw. When using a countersunk hole with a washer, it allows for simultaneous attachment and detachment of the bolt and washer, improving work efficiency. Additionally, we also handle the embedded washer hex socket bolt 'SNSQS'. Please feel free to contact us when you need assistance. 【Material and Finish】 ■ Screw body: SUSXM7 (equivalent to SUS304) ■ Screw body strength classification: A2-50 ■ Flat washer: SUS304 ■ Spring washer: SUS304 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our steel-made adjustment washers with a ferric oxide coating, 'SWA-AW'. These washers offer a wide variety of outer diameters and thicknesses compared to standard flat washers. They are suitable for securing materials with low limit surface pressure, such as aluminum and resin, while ensuring a stable seating surface in elongated holes. Additionally, we also offer adjustment washers (steel, electroless nickel-plated) 'SWA-AWEL' and adjustment washers (stainless steel) 'SWAS-AW'. 【Product Lineup (Partial)】 ■SWA-2-8-AW ■SWA-3-8-AW ■SWA-3-10-AW ■SWA-3-12-AW ■SWA-3-15-AW *For more details, please download the PDF or feel free to contact us.

We would like to introduce our titanium washer-integrated hexagon socket bolt 'SNSI1T'. When using a washer in a countersunk hole, the bolt and washer can be attached and detached simultaneously, improving work efficiency. The specific gravity is about 60% of that of stainless steel. It is non-magnetic. Additionally, we also handle titanium washer-integrated hexagon socket bolts such as "SNSI1T-UT," "SNSI3T," and "SNSI3T-UT." 【Material Properties (Partial)】 ■ Specific Gravity: 4.51 ■ Melting Point (°C): 1668 ■ Longitudinal Elastic Modulus (GPa): 106 ■ Thermal Conductivity (W/(m·K)): 17.16 ■ Coefficient of Linear Expansion (K^-1): 8.4×10^-6 ■ Electrical Resistivity (μΩ·m): 0.55 *For more details, please download the PDF or feel free to contact us.

The "QPHAH-1/QPHAH-2" is a screw plug made of aluminum alloy with a usable temperature of 180°C. The "QPHAH-2" has an exhaust hole in the hexagonal part to prevent pressure buildup in the tank due to oil vaporization. The shape of the screw and the presence of the exhaust hole can be selected based on the product code. Additionally, we also offer flange hexagonal hole screw plugs "SPN-H/L" and thin-walled pipe nuts (parallel pipe threads) "SWNB." 【Product Lineup (Partial)】 ■QPHAH-19-M14-1.5-1 ■QPHAH-22-M16-1.5-1 ■QPHAH-26-M20-1.5-1 ■QPHAH-32-M26-1.5-1 ■QPHAH-32-M27-1.5-1 ■QPHAH-40-M33-1.5-1 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our hex socket set screws 'SSC' that we handle. These are hex socket bolt types, suitable for CE marking compliance. We also manufacture special specification set screws with custom dimensions, shapes, materials, and surface treatments. In addition, we offer anti-loosening washers, dedicated tools "SWAS-SC/SKSC," and sets of hex socket set screws and anti-loosening washers "SSC-SET." 【Product Lineup】 ■SSC-M3 ■SSC-M4 ■SSC-M5 ■SSC-M6 ■SSC-M8 *For more details, please download the PDF or feel free to contact us.

"SICX-SX" is a flat screw with a grinding attachment made of silicon carbide. It excels in heat resistance and chemical resistance, making it suitable for use in FPD manufacturing equipment, semiconductor manufacturing equipment, printed circuit board etching equipment, metal surface treatment facilities, and chemical plants. Additionally, we also handle grinding-attached cheese screws (pure tungsten) "SNCW" and hex socket bolts (MAT21) "SNSMT." 【Product Lineup】 ■SICX-M3-SX ■SICX-M4-SX ■SICX-M5-SX *For more details, please download the PDF or feel free to contact us.

We would like to introduce our product, the "SKEIBD-SET," which includes a recess damaged screw extraction bit and impact driver set. This set allows you to remove small screws with cross holes and hexagon bolts that cannot be removed with standard tools due to damaged or stripped recesses. Additionally, we also offer the hexagon damaged screw extraction socket "SKEK" and the titanium hex wrench "SKHTG." 【Set Contents】 ■ Bit for hexagon holes ■ Bit for cross holes (compatible with screw diameters M2-M4) ■ Bit for cross holes (compatible with screw diameters M3-M6) ■ Impact driver *For more details, please download the PDF or feel free to contact us.

The "SCNL-HD" is a hygienic design hexagonal bag nut with a flange. It is suitable for applications in food machinery and pharmaceutical machinery where hygiene management is required. The installation surface is sealed to prevent the intrusion of foreign substances and liquids. We also offer other hygienic design products such as the flange hexagonal bag nuts "SCNL-HD-E," "SCNL-HP-HD-E," and the flange hexagonal bolts "SFHL-HD," "SFHL-HD-E." 【Product Lineup (Partial)】 ■SCNL-M4-HD ■SCNL-M5-HD ■SCNL-M6-HD ■SCNL-M8-HD ■SCNL-M10-HD ■SCNL-M12-HD *For more details, please download the PDF or feel free to contact us.

We would like to introduce the SUSXM7 clean washed and packaged hex socket low head bolt 'SLHS-UCL' that we handle. This hex socket low head bolt made of USXM7 is suitable for components incorporated into FPD manufacturing equipment, semiconductor manufacturing equipment, medical devices, and parts used in clean rooms. Additionally, we also handle other clean washed and packaged hex socket bolts such as 'SNSL-UCL', 'SNSS-UCL', and hex socket ultra-low head bolts like 'SSHH-C22'. 【Product Lineup】 ■SLHS-M2-UCL ■SLHS-M2.5-UCL ■SLHS-M3-UCL ■SLHS-M4-UCL ■SLHS-M5-UCL ■SLHS-M6-UCL *For more details, please download the PDF or feel free to contact us.

We would like to introduce our hexagon socket bolt 'SNSL' made of SUS316L. SUS316L is a stainless steel that enhances pitting corrosion resistance and oxidation resistance by adding Mo to SUS304, and further improves intergranular corrosion resistance through low carbon content. It exhibits superior corrosion resistance compared to SUS304 in chemical and marine environments. Additionally, we also offer high-strength stainless hexagon socket bolts with integrated washers "SNSQLG" and flat washers for high-strength stainless bolts "SWALG-F". 【Product Lineup (Partial)】 ■SNSL-M1.6 ■SNSL-M2 ■SNSL-M2.5 ■SNSL-M3 ■SNSL-M4 *For more details, please download the PDF or feel free to contact us.

We would like to introduce the aluminum cabinet handle 'UAC' that we handle. This aluminum handle is mounted from the front, designed for easy gripping and capable of withstanding force. The handle comes in two thicknesses: 20mm and 26mm. Additionally, we offer a wide range of products including the stainless steel cabinet handle 'UACS', aluminum handles 'UAF-AB', 'UAP', 'UBF', 'UBGC', and stainless steel handles 'UAFS', 'UAFS-HP'. 【Surface Treatment】 ■ Anodized ■ Barrel Polishing ■ Electrostatic Coating (Black) ■ Electrostatic Coating (Silver) ■ Electrostatic Coating (Red) *For more details, please download the PDF or feel free to contact us.

The "UPVF" is a plastic handle equipped with a 2-position, 3-direction pneumatic valve. The pneumatic valve comes with a φ6 fitting. Thanks to the spool valve mechanism, the operability of the button is not affected by pressure. When you release your hand from the operation button, it returns to its original position due to the force of the built-in spring. [Cover Colors] ■BK: Anodized (Black) ■BL: Anodized (Blue) ■SG: Anodized (Silver) *For more details, please download the PDF or feel free to contact us.

We would like to introduce the zinc pocket handle 'UTAC' that we handle. This is an embedded type handle that can be used for both lifting and pulling. The "UTAC-2" with a seal prevents foreign objects and liquids from entering the gaps on the mounting surface. The protection rating is IP66. In addition, we also handle stainless steel pocket handles "UTACS," "UTAMS," and zinc pocket handle "UTAM," among others. 【Lineup】 ■UTAC-127-1 ■UTAC-155-1 ■UTAC-127-2 ■UTAC-155-2 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our plastic handle with a key switch, 'UPIF-KS'. The key switch can be used for switching contacts and controlling devices and equipment. You can choose the cover color from anodized black, blue, or silver. Additionally, we also offer the plastic handle with a key switch and LED, 'UPIF-KSL', as well as the plastic handle with LED, 'UPIF-L'. 【Material and Finish】 ■ Main body: Glass fiber reinforced nylon 6, aluminum alloy ■ Key switch: Zinc alloy, chrome plated ■ Key: Zinc alloy, chrome plated ■ Cover: Aluminum alloy, anodized (various colors) ■ Screw part: Steel, trivalent chromate treated ■ Cable: PVC *For more details, please download the PDF or feel free to contact us.

We would like to introduce our adjustable high-performance shock absorber (Power Stop) 'PAE'. By setting the adjustment knob, it is possible to adjust the resistance generated during energy absorption to match the collision speed. We also offer other high energy absorption types such as 'PHE', small diameter types like 'PME', and standard types like 'PSE'. 【Features】 ■ Continuously adjustable from (0) for low speeds to (5) for high speeds ■ Allowable angular deviation: 2° ■ Usable even in high-pressure chambers (up to 1MPa) ■ Usable temperature: -10℃ to 70℃ ■ Can be used in clean rooms as it uses bio-oil ■ Can be used in food industry equipment as it uses H1 certified oil *For more details, please download the PDF or feel free to contact us.

We would like to introduce our steel panel protection washers, 'FPW'. These washers are designed to prevent cracking and scratching of panels, such as acrylic, when securing them with pan head screws by distributing the tightening load. We also offer aluminum 'FPWA' and stainless steel 'FPWS' options. Please feel free to contact us for any inquiries. 【Product Lineup】 ■FPW-4-3.5 ■FPW-4-5.5 ■FPW-5-3.5 ■FPW-5-5.5 ■FPW-6-3.5 ■FPW-6-5.5 *For more details, please download the PDF or feel free to contact us.

We would like to introduce our zinc die-cast panel support clamp, 'FPSC', which we handle. This clamp is designed to secure panels made of glass, plastic, and other materials. It clamps by sandwiching the panel with an internal rubber insert. We also offer T-nuts for panel support clamps, 'FPSC-N'. Please feel free to contact us when you need assistance. 【Lineup (partial)】 ■FPSC-60-5-E ■FPSC-60-5-EB ■FPSC-60-5-F ■FPSC-60-5-FA ■FPSC-60-5-FB ■FPSC-60-6-E *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Cam Lever" and "Latch Lever" that we handle. The cam lever includes the horizontal lever type "LZX-GV," the angled lever type "LZX-KV," the spanner-operated type "LZX-SK," and stainless steel options. Additionally, the latch lever features a horizontal lever type for upward tightening "LZY-GV-A," downward tightening "LZY-GV-B," and a spanner-operated type "LZY-SK-A," among a wide range of products. 【Product Lineup (Partial)】 ■LZX-GV ■LZX-KV ■LZXS-GV ■LZX-SK ■LZXS-KV ■LZXS-SK *For more details, please download the PDF or feel free to contact us.

The "HAFS-B/HAFS-C" is a crank handle for square shafts equipped with a retractable rotating grip "GDRS" that can be lifted and then folded down. The hub cover is easy to attach and detach. The folded grip is stored in a pocket of the handle body. Additionally, we offer a wide range of products including aluminum disc handles "HMB," "HME," and aluminum 2-spoke handles "HMD," "HMF," "HSR," among others. 【Features of the Aluminum Crank Handle】 ■ Crank handle for square shafts with a retractable rotating grip "GDRS" that can be lifted and then folded down ■ The folded grip is stored in a pocket of the handle body ■ The hub cover is easy to attach and detach ■ Available in 2 color variations *For more details, please download the PDF or feel free to contact us.

The serration lock "LXP" is a component for determining rotation direction and positioning. It is used for angle adjustment and fixation of links, as well as phase adjustment and fixation of cams. There are four types available. Additionally, we offer a stainless steel version "LXPS," a guide for the serration lock "LXGS," a version with a connection part "LXSS," and a joint set for the serration lock. 【LXP Lineup】 ■LXP-R-A: Reamer hole, front mounting ■LXP-R-B: Reamer hole, rear mounting ■LXP-M-A: Female thread, front mounting ■LXP-M-B: Female thread, rear mounting *For more details, please download the PDF or feel free to contact us.

The "RSA-FA" is a robot stand compatible with FANUC robots with a payload capacity of 3kg to 25kg. The screw holes on the side can be used for mounting pneumatic equipment and other devices. It features a stop section for positioning by aligning it with the reference surface of the robot base. Additionally, we offer a wide range of products, including the "RSA-ME" for Mitsubishi Electric robots, the "RSA-YS" for Yaskawa Electric robots, and the "RSA-DE" for Denso Wave robots. 【Features】 ■ Compatible with FANUC robots with a payload capacity of 3kg to 25kg ■ Cast iron stand for adjusting the installation height of the robot ■ Stop section for positioning by aligning it with the reference surface of the robot base ■ Side screw holes available for mounting pneumatic equipment and other devices ■ Support for custom specifications *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Ball Lock Pins" that we handle. We offer a variety of types including the compact types "PABLS" and "PABLT," ring types "PBPL/PBPLS/PBPLS-NI," knob types "PCBLS" and "PCBLS-NI," "PCPL/PCPLS/PCPLS-NI," and L-shaped knob type "PDBLS." Additionally, we have a diverse lineup of products including key lock types, retainer types, cables for lock pins, and retainer washers. 【Partial Lineup】 ■PABLS ■PABLT ■PBPL/PBPLS/PBPLS-NI ■PCBLS ■PCBLS-NI ■PCPL/PCPLS/PCPLS-NI *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Leveling Adjuster" that we handle. Plastic pad leveling adjusters (male threads) include "FCF/FCF-G," "FCFSS," "FCFSS-G," as well as male thread options like "FCM/FCM-G" and "FCMS-G." We offer a wide range of products made from durable materials, including metal and stainless steel. For more details, please refer to the catalog. 【Product Lineup (Partial)】 ■FCF/FCF-G ■FCFSS ■FCFSS-G ■FCM/FCM-G ■FCMS ■FCMS-G *For more details, please download the PDF or feel free to contact us.

The "MBPS" is a linear clamp that can be used as an emergency brake. It is also suitable for applications using linear motors and for preventing the drop of Z-axis (vertical axis) tables. It can be used for holding tables, positioning, and preventing vibrations. Additionally, it is easy to assemble into existing systems. Design changes such as extending the linear guideway rails or changing the table size are not required. 【Features】 ■ With brake mechanism ■ Normally Closed type - When air pressure is supplied: the clamp is released - When air pressure is discharged: the spring force clamps the linear guideway rails ■ Compact design *For more details, please download the PDF or feel free to contact us.

The "RBPS" is a linear clamp Z that can implement retention and drop prevention measures for linear shafts and piston rods used on the Z-axis (vertical axis). It can be used as an emergency brake. Please use it in combination with a control device that stops the air supply during system shutdown. Additionally, we offer a magnetic sensor "MFS" and extension cables for the magnetic sensor "KAG" and "KAW" to be used in conjunction with this product. 【Features】 ■ Equipped with a braking mechanism ■ Normally Closed type - When air supply is provided: the clamp is released - When air is discharged: the shaft is clamped by spring force ■ By using the separately sold magnetic sensor "MFS," the clamped and unclamped states can be confirmed by the LED's illumination status. *For more details, please download the PDF or feel free to contact us.

The "MKL" is a low-cost Normally Open type linear clamp. It is easy to assemble into existing systems. Design changes such as extending the linear guideway rails or changing the table size are not required. Additionally, we also offer the Normally Closed type "MKSL" and the adapter plate "PMK." 【Features】 ■ For holding, positioning, and preventing vibration of the table ■ Low-cost Normally Open type - When air pressure is supplied: clamps the linear guideway rails - When air pressure is released: opens the clamp ■ Compact design *For more details, please download the PDF or feel free to contact us.

The "GN911" is a clamp lever (male thread) for slider blocks and pipe joints. It allows for quick tightening without the need for tools. Please use it to replace the hex socket bolts included with the slider block and pipe joint. Additionally, the length of the threaded part is specifically designed for attachment to the slider block and pipe joint. 【Material and Finish】 ■ Lever part - Zinc die-cast - Electrostatic coating (matte silver) ■ Threaded part: SUS303 ■ Set screw: Stainless steel ■ Spring: Stainless steel wire *For more details, please download the PDF or feel free to contact us.

The "WBS/WBH" is a motor bracket that integrates the motor side flange and the support unit side flange into a single structure. It is compatible with various manufacturers' servo motors and fixed-side support units (round type). By simply assembling the servo motor, fixed-side support unit, and coupling, the drive part of the positioning table can be constructed. Made of cast iron with damping characteristics, it features a low-temperature black chrome treatment that offers excellent corrosion resistance. 【Features】 ■ Superior corrosion-resistant surface treatment ■ Small lot sizes, short delivery times ■ Integrated structure (high precision) ■ Supports alignment *For more details, please download the PDF or feel free to contact us.

The "CUAB-A" is a bracket that allows for easy positioning with a vertical axis aluminum frame and square shaft. It can be mounted from either the end face or side of the aluminum frame and square shaft. By adjusting the screw-in set screw, you can reduce play with the aluminum frame and square shaft. Additionally, we offer a wide range of products including "CUPB" for round pipes, a one-button type "CUSB-1B" for square shafts, and a two-button type "CUSB-2B." 【Features】 ■ Pressing the operation button releases the lock, allowing for smooth movement of the bracket in the vertical direction, and it holds at the position where the button is released. ■ It can be moved upwards without pressing the operation button by applying force. ■ Capable of supporting up to 5 kg. *For more details, please download the PDF or feel free to contact us.

The "SBJL-F" is a ball joint of the clamp lever type (male thread). It allows the threaded ball to be tilted ±30° in any direction and up to 90° in the groove direction. It is suitable for angle adjustment and fixation of sensors, cameras, lighting, monitors, and more. In addition to the male thread "SBJL-M," we also offer a stop screw type male thread "SBJS-F," male thread "SBJS-M," and mounting plates. 【Features】 ■ Allows the threaded ball to be tilted ±30° in any direction and up to 90° in the groove direction ■ Positioning component utilizing a ball ■ The threaded ball can be fixed at the desired angle by tightening the clamp lever ■ The base plate bottom has holes for anti-rotation pins *For more details, please download the PDF or feel free to contact us.

We would like to introduce our spring stop 'PSTF'. It is suitable for workpiece positioning applications. Please use a round hole or an elongated hole for installation. You can choose from different pin materials, the presence or absence of knurling, pin shapes, and load types such as light load and heavy load. 【Lineup】 ■PSTF-KG ■PSTF-NG ■PSTF-NR *For more details, please download the PDF or feel free to contact us.

We would like to introduce our spring plungers, 'PSF/PSN'. There are plastic pin types available for both steel and stainless steel versions, allowing you to choose the body material, pin material, and load type. In addition to the pin type "PSF-S," we also offer the stainless steel pin type "PSF-SN-S," which features a seal to prevent dust and debris from entering the interior. 【PSF/PSN Lineup】 ■PSF ■PSF-SS ■PSF-SN ■PSN ■PSF-KN *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Mini Ball Plunger" that we handle. Starting with "PBF" and "PNBF," which come in both light load and heavy load types in steel and stainless steel, we also offer the ceramic ball type "PBF-KN-A4-CE." Additionally, we have the press-fit plunger "PPRH" and the insertion type ball plunger "PPSS" available. 【Features of PBF-KN-A4-CE】 ■ Ceramic ball type ■ Body made of SUS316L, excellent corrosion resistance ■ Ball made of ceramic, excellent wear resistance ■ Available in light load and heavy load types *For more details, please download the PDF or feel free to contact us.

The "PQC" is a quick pin plunger of the type that can be driven in. It allows for one-touch positioning and fixing of the workpiece. The "PQC-SB" and "PQC-KB" have a structure that makes it difficult for dust and debris to enter the interior due to the presence of packing. Additionally, we also offer drive pins and cam rings for quick pin plungers, as well as the screw-in type "PQCM." 【PQC Lineup】 ■PQC-SA ■PQC-SB ■PQC-KA ■PQC-KB *For more details, please download the PDF or feel free to contact us.

The "CB" is a counterbalance hinge that assists in the opening and closing of panels vertically due to the action of a torsion spring, allowing for easy operation of heavy panels. When the panel is opened beyond 65°, it automatically opens to the fully open position (80°) due to the cam mechanism. If one unit of this product can accommodate the required torque, please use it in combination with a support hinge (sold separately). 【Applicable Screw Size】 ■ Screw Diameter: M6 ■ Screw Length - Minimum: Panel thickness + 9.5 - Maximum: Panel thickness + 12.7 *For more details, please download the PDF or feel free to contact us.

The "E6" is a torque hinge that holds the door at any position regardless of the angle of the hinge. We offer types with different holding torque for clockwise and counterclockwise rotation, as well as identical types. By selecting the holding torque according to the application—light when opening and heavy when closing, or vice versa—you can enhance the operability and safety of the door. Additionally, we have other products available, including plastic, one-way types, large sizes, and stainless steel torque hinges. 【Material and Finish】 ■ Body: Aluminum alloy, electrostatic coating (matte black) ■ Hex socket bolt (screw included): SUSXM7 *For more details, please download the PDF or feel free to contact us.

The "HNSH-A" is an all-metal hinge. It features a simple design with a reduced thickness. You can choose from a variety of patterns based on the combination of vertical and horizontal dimensions. In addition to this product, we also offer "HNSH-B," "HNSHS-A," "HNSHS-B," "HNSHS-N," and "HNSPS-B." 【Material and Finish】 ■ Body: Steel, zinc-plated, trivalent chromate treatment ■ Pin: Equivalent to SUS304 ■ Cross-recessed small head screw (screw included service): SUSXM7 *For more details, please download the PDF or feel free to contact us.

The "ST-11A" is a through-hole type hinge that allows the door to be held at any position, regardless of the angle of the hinge. It is suitable for use in areas with limited installation space. There are types with different holding torque for clockwise and counterclockwise rotation, as well as types with the same torque. Additionally, we also offer "ST-11A1," "ST-8A," and "ST-8A1" products. 【Material and Finish】 ■ Main body: Zinc alloy, electrostatic coating (matte black) ■ Hexagon socket bolt (screw included as a service): SUSXM7 *For more details, please download the PDF or feel free to contact us.

The "HNG-A-CR" is an all-metal hinge. It features a robust design and is suitable for heavy-duty applications. The mounting holes are designed for countersunk screws. Additionally, we also offer "HNG-C-CR," "HNHGS-A," "HNHGS-L," and "HNRB." 【Material and Finish】 ■ Body: Zinc die-cast, chrome-plated ■ Pin: Equivalent to SUS303 ■ Hex socket countersunk screws (screw included as a service): SUSXM7 *For more details, please download the PDF or feel free to contact us.

"HNMHA" is a large aluminum slide hinge designed to be installed on the inside of doors and similar structures. The maximum opening angle is 180°. It comes with four reinforced washers. Please use M6 screws for installation. In addition to this product, we also offer two other large aluminum slide hinges, "HNMMA" and "HNMVA," as well as three hinge plates, "HNAFS," "HNAMS," and "HNARS." 【Material and Finish】 ■ Main body: Aluminum alloy, anodized finish ■ Washer: SUS304 *For more details, please download the PDF or feel free to contact us.

"HNNHS" is a large stainless steel slide hinge that can be installed on the inside of doors and other surfaces. The maximum opening angle is 180°. The installation direction can be selected based on the product code. In addition to this product, we also offer other large slide hinges such as "HNNMS" and "HNNVS," as well as three hinge plates: "HNBFS," "HNBMS," and "HNBRS." 【Material and Finish】 ■Main body: SUS304 *For more details, please download the PDF or feel free to contact us.

The "HNSW" is a zinc die-cast hinge that can be used for safety switches and monitoring of doors and covers, such as those on devices and safety fences. When the door is opened, the switch contacts operate. The NC contact cuts off the circuit upon the door's opening, while simultaneously the NO contact notifies that the door has been opened. In addition to this product, we also offer various other products such as the metal hinge "HNSW-N," the safety switch hinge "HNSWS," and the hinge plate "HNER." 【Material and Finish】 ■ Body: Zinc die-cast, powder coating (silver metallic) ■ Pin: Equivalent to SUS303 *For more details, please download the PDF or feel free to contact us.

The "LEMS-MD" is a practical clamp lever featuring a serration ring made of zinc die-cast, integrated into a plastic lever body. It is compatible with metal detection. By mixing metal powder into the resin of the lever part, it can be detected by metal detectors, reducing the risk of foreign matter contamination. Additionally, we also offer another practical clamp lever (female thread) "LEFS-MD." 【Materials and Finishing】 ■ Lever part: Nylon 6, iron-based components (blue-gray) ■ Thread part: SUS303 ■ Set screw: Stainless steel ■ Serration ring (insert): Zinc die-cast ■ Spring: Stainless steel wire *For more details, please download the PDF or feel free to contact us.