藤川伝導機 List of Products and Services

This document summarizes information related to fixtures and associated equipment, ranging from high-rigidity hydraulic clamp units to compact and versatile clamp lights that can be selected over a wide range. It includes a wealth of information such as the product lineup, product composition, factors for selecting clamp units, and explanations of clamp operations. Additionally, it features clamp force diagrams and selection materials for long arm usage limits, so please make use of it. 【Contents (partial)】 ■LINE UP ■Product Composition ■Factors for Selecting Clamp Units ■Explanation of Clamp Operations ■Selection Materials (Clamp Force Diagrams / Hydraulic (JEHS)) *For more details, please download the PDF or feel free to contact us.

The 'JEH/JEA' that we handle is a compact and wide variation clamp unit. Both hydraulic (7MPa) and pneumatic specifications are available in the same dimensions. With a new design, the overall length has been made compact, contributing to the miniaturization of fixtures. Additionally, we have adopted a magnetic proximity embedded switch that emphasizes ease of use, making it easy to confirm clamping and unclamping. 【Features】 ■ Hydraulic (7MPa) and pneumatic specifications available in the same dimensions ■ New design contributes to compact overall length and miniaturization of fixtures ■ Magnetic proximity embedded switch focused on ease of use, making clamping and unclamping confirmation easy ■ The rod cover and fixture surface seal utilize a newly adopted gasket method for simplicity and reliability *For more details, please download the PDF or feel free to contact us.

This document contains common precautions regarding the high-low tar that we handle. It includes a wealth of information on design considerations, selection, installation, piping, lubrication, air quality, and more. Additionally, it provides precautions related to maintenance inspections and usage environments. Please make use of it. [Contents (partial)] ■ Design considerations ■ Selection ■ Installation ■ Piping ■ Oil suction *For more details, please download the PDF or feel free to contact us.

This document is a selection guide for rack and pinion type rotary actuators that we handle. It includes information on selecting sizes for cases where only static forces, such as clamping, are needed, as well as for moving loads, and checks for cushion allowable energy. Additionally, it provides checks for radial and thrust loads, a table for calculating moment of inertia, and examples of selecting rotary actuators. Please make use of it. [Contents (partial)] ■ Size selection ■ Cushion allowable energy check ■ Radial and thrust load checks ■ Moment of inertia calculation table ■ Examples of selecting rotary actuators *For more details, please download the PDF or feel free to contact us.

We would like to introduce our rack and pinion type rotary actuator, the "HTR/M series." The "HTR series" features high-load tapered roller bearings, chrome alloy steel racks and pinions, and high-strength ductile cast iron housings, making it suitable for a wide range of devices and production equipment. The "M series" adopts a structure that allows for inspection and replacement of the piston packing without disassembling or separating the output shaft, making maintenance easier. 【Features (HTR series)】 ■ It can transmit torque while supporting the load on the output shaft, potentially eliminating the need for external support bearings. ■ By adopting an optional cushioning mechanism, it can reduce external loads. ■ The piston uses durable urethane rubber seals and wear rings. ■ The output shaft employs low-pressure seals. *For more details, please download the PDF or feel free to contact us.

This document summarizes information regarding the rack and pinion rotary actuator '35RP2'. It includes various information such as internal structure diagrams for different swing angles, a packing list, and a detailed parts list. Additionally, it contains notes on precautions when installing the valve seal, so please make use of it. [Contents] ■ Swing angle 90° ■ Swing angle 180° ■ Packing list ■ Parts list ■ Precautions *For more details, please download the PDF or feel free to contact us.

The "35RP2" is a rack and pinion type rotary actuator that is fully compatible in dimensions and mounting with the 35RP. Thanks to its unique backlash elimination mechanism, it has eliminated play at the rotation end. The swing angle can be adjusted by ±5° using the rotation angle fine-tuning mechanism. Additionally, a magnet is standardly built into the piston section, allowing for the installation of a switch later on. 【Features】 ■ Five types of cylinder inner diameters ranging from φ32 to φ80, with three types of support forms: SD type, FA type, and FB type. ■ The unique backlash elimination mechanism has removed play at the rotation end. ■ The swing angle can be adjusted by ±5° using the rotation angle fine-tuning mechanism. ■ The switch is standardized to the highly versatile magnetic proximity AX and AZ type switches. *For more details, please download the PDF or feel free to contact us.

We would like to introduce the 21MPa position sensing hydraulic cylinder "PTT-2B" that we handle. Compared to the "PTT-1B," it has become more compact, with the total length of the cylinder body shortened by up to 43mm. Additionally, high-precision absolute position detection is possible using a position sensor based on the magnetostrictive phenomenon, eliminating the need for a switch for origin setting. 【Features】 ■ High-precision absolute position detection using a position sensor based on the magnetostrictive phenomenon ■ No switch needed for origin setting ■ Compact design ■ Standard compatibility with cushioning *For more details, please download the PDF or feel free to contact us.

This document summarizes information about the double-acting rod "70/140P-8." It includes a parts list featuring components such as the cylinder tube, rod cover, head cover, and piston, as well as internal structure diagrams and packing lists. Additionally, it provides notes on precautions when installing valve seals, so please make use of this information. [Featured Products] ■ Double-acting rod / Standard type ■ Double-acting rod / Switch set *For more details, please download the PDF or feel free to contact us.

This document summarizes information about the double-acting rod "35P-3." It includes a parts list detailing materials and quantities for components such as the cylinder tube, rod cover, head cover, and piston, as well as internal structure diagrams and a packing list. Additionally, it provides notes on precautions when installing the valve seal, so please make use of this information. [Featured Products] ■ Double-acting rod / Standard type ■ Double-acting rod / Switch set *For more details, please download the PDF or feel free to contact us.

We would like to introduce our 'GV/GVR Series' wheels and tires specifically designed for AGVs. With a high load capacity and a slim design suitable for AGV wheels, you can choose from three types of tires according to your application. Additionally, you can choose whether or not to include a base plate. Please feel free to contact us if you have any inquiries. 【Features】 ■ High load capacity ■ Slim design suitable for AGV wheels ■ Choice of three types of tires according to application ■ Option to include or exclude a base plate *For more details, please download the PDF or feel free to contact us.

This document summarizes information regarding the double-acting rod type "70/140M-3." It includes a parts list that specifies materials such as carbon steel for mechanical structures and rolled steel for general structures, along with component names like cylinder tubes and rod covers. Additionally, internal structure diagrams and a packing list are also provided, so please feel free to download and take a look. [Featured Products] ■ Double-acting rod / Standard type (Φ40–Φ140) ■ Double-acting rod / Standard type (Φ160–Φ250) *For more details, please download the PDF or feel free to contact us.

In this document, we have compiled information regarding the double-acting rod type '210C-2/210H-5'. In addition to the cylinder tube, we have included parts such as rod covers, head covers, pistons, and piston rods. We also present a list of seals made from materials like nitrile rubber, polyurethane rubber, and fluororubber. Please feel free to download and take a look. 【Featured Products】 ■ Double-acting rod / Standard type / 210C-2 ■ Double-acting rod / Standard type / 210H-5 *For more details, please download the PDF or feel free to contact us.

The product "needle roller" is supplied as a standalone product, either as a rolling element or as pins or shafts. The standard end face of the needle roller is of the flat F shape, while the rounded A shape is considered semi-standard. We also manufacture a type that has crowning on the rolling surface to alleviate edge loading. 【Precision of Needle Rollers】 ■ Allowable tolerance for the average diameter Dw: 0 to -10μm ■ Maximum mutual difference for diameter Dw: 2μm ■ Roundness and diameter variation in the plane for diameter Dw: 1.0 (Lw/Dw≦6)μm ■ Allowable tolerance for length Lw: h13 ■ Precision grade: Grade 2 *For more details, please download the PDF or feel free to contact us.

Our "retaining rings" are made from hard steel wire and have a surface that has undergone chemical treatment. They have the same shape as the C-shaped concentric retaining rings specified in JIS B 2804, but the cross-sectional height has been reduced to match needle roller bearings, and they are manufactured to smaller dimensional ranges. There are two types of retaining rings: the WR type designed for shafts and the BR type for housings. 【Lineup (partial)】 ＜For shafts WR type＞ ■WR 4 ■WR 5 ＜For housings BR type＞ ■BR 7 ■BR 8 *For more details, please download the PDF or feel free to contact us.

Our "seal" is a specialized product designed with a reduced cross-sectional height to fit needle roller bearings. It is a contact seal made of synthetic rubber reinforced with steel plates, with a temperature range of -25 to 120°C, and should be used below 100°C for continuous operation. There are two types of seals: the G type with a single lip and the GD type with two lips. 【Product Lineup (Partial)】 ＜G Type＞ ■G 4× 8×2 ■G 5× 9×2 ＜GD Type＞ ■GD14×20×3 ■GD14×21×3 *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Linear Ball Bearings" that we handle. We offer a variety of types, including shell type KH, solid type KLM, gap adjustment type KLM‥S, and open type KLM‥P. All types allow for limited motion. Please feel free to contact us when you need assistance. 【Product Lineup】 ■ Shell Type ■ Solid Type ■ Stroke Type *For more details, please download the PDF or feel free to contact us.

Our "Linear Ball Bearing with Stroke Type" features a structure where a retainer incorporating a row of balls can move circumferentially and axially within the outer ring, allowing for both rotational motion and limited reciprocating motion along the axis. At both ends of the outer ring, retaining rings are installed as stoppers for the retainer. Additionally, a wave spring is provided between the retaining ring and the retainer to cushion impacts and prevent wear. We also manufacture a version equipped with synthetic rubber seals at both ends of the outer ring. 【Dimensional Accuracy】 ■ Ball Inscribed Circle Diameter (Fw): F6 ■ Outer Ring Outer Diameter (D): h5 *For more details, please download the PDF or feel free to contact us.

Our "Linear Flat Roller" is a needle roller with a flat-shaped retainer that incorporates needle-shaped rollers. By inserting it between two opposing flat surfaces, it enables smooth reciprocating motion through rolling. We offer a lineup of retainers made of polyamide resin in FF and RF types, as well as a BF type made of pressed steel plate. We also have multi-row FF-ZW types of needle rollers available. 【Specifications for the track surface (recommended)】 ■Surface roughness (maximum): Ra0.2 ■Surface hardness: 58–64 HRC ■Minimum effective hardened layer depth: 0.4 mm ■Mounting accuracy (maximum): 0.1 mm per 1000 mm *For more details, please download the PDF or feel free to contact us.

Our "Linear Roller Bearing" has the capability for cylindrical rollers to circulate within the main body, allowing for infinite linear motion on a flat surface. The cylindrical rollers are held and guided by a retainer and the flange of the main body. The structure prevents adjacent rollers from making contact due to the retainer, which results in a low coefficient of friction. 【Specifications for Track Surface and Mounting Surface (Recommended)】 ■ Surface roughness of the track surface (maximum): Ra0.2 ■ Surface hardness of the track surface: 58–64 HRC ■ Parallelism of the mounting surface x: 0.05mm per 100mm ■ Parallelism of the mounting surface y: 0.01mm per 100mm *For more details, please download the PDF or feel free to contact us.

This document is a product introduction book from Iwata Seisakusho Co., Ltd. It includes an introduction to new products such as protective caps and trim & trim seals, as well as mechanical component parts like set colors, shims, spacers, and washers, along with safety products and painting jigs. Information on custom processing and assembly products, as well as custom painting jigs, is also included. Please feel free to contact us when you need assistance. 【Contents (partial)】 ■ New product introduction ■ How to read the pages ■ Set colors ■ Shims and spacers ■ Washers ■ End plates *For more details, please download the PDF or feel free to contact us.

The "SNSLG-ALK" is a high-strength stainless steel hex socket bolt with nylon welding. It has approximately 1.8 times the strength compared to standard stainless steel hex socket bolts. It allows for space-saving and weight reduction by downsizing screw diameters and reducing the number of screws. Additionally, we also offer PTFE-coated "SNSLG-TF," low-temperature black chrome treated "SNSLG-RY," hex socket small head anti-loosening screws "SSC-SD," and cross-recessed anti-loosening pan head screws (brass) "SSCPB." 【Features】 ■ Tensile strength of 1000N/mm², 0.2% yield strength of 800N/mm² ■ Made of SUS316L with excellent corrosion resistance ■ Non-magnetic ■ Prevents screw loosening due to suppressed reverse rotation even after losing clamping force ■ The heat resistance temperature of the nylon welding is 120℃ *For more details, please download the PDF or feel free to contact us.

The "NQTS" is a standard type quick clamp fastener that makes the attachment and detachment of jigs easy when combined with a dedicated cam base, without the need for tools. Clamping and unclamping operations can be performed simply by rotating the knob 90°, making it suitable for repetitive tasks. In addition, we offer a wide range of products including the free slide types "NQTS-F" and "NQTS-F-N", and cam bases for quick clamp fasteners such as "NQTB", "NQTBS", "NQTB-N", and "NQTBS-N". 【Features】 ■ Clamping and unclamping operations can be performed simply by rotating the knob 90° ■ The knob's projection and laser engraving allow for immediate confirmation of the clamped state ■ The knob operation section has passed 50,000 operational tests ■ Excellent durability reduces the frequency of part replacements ■ Two hexagon socket bolts for installation are included *For more details, please download the PDF or feel free to contact us.

The "EDX" is a DIN connector with a built-in digital control amplifier for electromagnetic proportional valves. It can be directly mounted on proportional valves and is compliant with DIN EN 175301-803-A and ISO 4400. It is a digital amplifier for the smallest class of proportional valves. You can choose the input method of voltage 0-10V, 1-5V, or current 4-20mA. Additionally, a model equipped with Bluetooth wireless communication technology has been added, allowing for settings and adjustments via wireless communication without opening the connector cover. 【Features】 ■ Can be directly mounted on proportional valves ■ Space-saving ■ Dust and waterproof ■ Easy control with analog input ■ Compatible with ModbusRTU protocol *For more details, please download the PDF or feel free to contact us.

This catalog introduces NOK Corporation's "vibration-damping products." It features a diverse lineup including engine TVDs (Torsional Vibration Dampers) for automobiles, as well as products for industrial machinery (construction and agricultural machinery, etc.), two-wheelers, leisure vehicles, and boats. Additionally, it provides detailed information on analysis, evaluation, and development technologies, making it a useful resource for product selection. We encourage you to take a look. [Contents (partial)] ■ NOK Group product range, foundational technologies, and vibration-damping products ■ Vibration-damping products for automobiles ■ TVDs for engine systems ■ CBS for drive systems ■ Dynamic dampers and others for drive systems *For more details, please download the PDF or feel free to contact us.

This catalog introduces NOK Corporation's "vibration-damping rubber." It provides detailed information on various types and features, including S-type mounts, ultra bushes, and stepping motor mounts. Additionally, it includes precautions for using vibration-damping rubber, as well as the principles of vibration isolation and vibration transmission rates, making it a useful resource. [Contents (partial)] ■ Types and features of vibration-damping rubber ■ Precautions for using vibration-damping rubber ■ Principles of vibration isolation and vibration transmission rates ■ How to select vibration-damping rubber ■ Rubber materials for vibration-damping rubber *For more details, please download the PDF or feel free to contact us.

We would like to introduce the accessories for tubes and other products that we handle. Starting with the "Guard Wire," which protects the tube from bending at the connection point with fittings, we also offer a pocket-sized "Compact Plastic Tube Cutter" and the NHP series dedicated coating cutter, the "Sheath Stripper," among a rich lineup. Please feel free to contact us when you need assistance. 【Product Lineup】 ■ Guard Wire ■ Compact Plastic Tube Cutter ■ Sheath Stripper ■ Plastic Tube Cutter ■ Plastic Hose Cutter ■ Tube Holder *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Coil and Bend" products that we handle. We have a wide range of products, including the "Urethane Coil Tube," which excels in flexibility and does not put strain on the connection points, and the "Crank Tube," which helps suppress issues such as leaks and liquid pooling when using elbow joints. Additionally, we also offer "Coiling Tubes" and "Spiral Tubes." 【Features】 <Urethane Coil Tube> - Suitable for expandable piping, with no sagging of the tube even when contracted. - Multi-type options are available, allowing for multi-point piping. <Crank Tube> - U-shaped processing and 3D processing are possible. - Customization is available according to customer requests. *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "Multi-Core Tube." We offer "Control Tube" and "Super Control Tube" made with biomass products AmidoFlex (AX-1200) and SuperFlex (F-1500), as well as "Urethane Flat Tube," which excels in flexibility and abrasion resistance, making it suitable for movable piping. Please feel free to contact us if you have any requests. 【Features】 <Control Tube / Super Control Tube> - The inner tube is protected by a covering tube, providing excellent resistance to external impacts, weather, and durability, making it suitable for outdoor piping. - The use of polyvinyl chloride for the covering makes the inner nylon tube less susceptible to damage under conditions of contact and spark dispersion. - It can be covered with up to 7 cores, making it suitable for multi-core piping. *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "flame-retardant tubes." Starting with the "Flame-Retardant Tube SR2 Flex," which does not contain any plasticizers, we also offer "Tubes for Harsh Environments" that use soft copper wire for braiding, as well as "Non-Halogen, Non-Phosphorus Flame-Retardant Tubes" that excel in flexibility. Please feel free to contact us when you need assistance. 【Features】 <Flame-Retardant Tube SR2 Flex> ■ Single-core tube made from flame-retardant materials ■ Will not continue to burn even if welding sparks adhere to it <Tubes for Harsh Environments> ■ The silicone coating is made from thermosetting resin, protecting the inner tube without melting due to heat *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "fluorine tubes" that we handle. Our lineup includes "multi-layer fluorine tubes" made with biomass materials for the soft nylon outer layer, and "flexible fluorine tubes" that are easy to bend and difficult to break, making them suitable for piping in narrow spaces. We also offer "fluorine resin tubes" that excel in heat resistance (up to +200°C) and cold resistance (down to -65°C). 【Features】 <Multi-layer Fluorine Tubes> ■ The inner layer is made of fluorine resin, providing excellent chemical resistance. ■ Superior smoothness on the inner surface, reducing media retention. <Multi-layer Fluorine Tubes (Static Electricity Prevention Type)> ■ The outer layer is made of soft nylon with a static electricity prevention formulation, preventing dust adhesion due to static electricity. *For more details, please download the PDF or feel free to contact us.

The "Hybrid Gas Barrier Tube" features excellent inner surface smoothness and suppresses the retention of media. By incorporating a gas barrier resin in the inner layer, the oxygen permeability is about one-third that of PVDC. It excels in oil resistance and resistance to organic solvents, as well as in gas barrier properties after the evaporation of organic solvents. Additionally, we offer the "Hybrid Gas Barrier Fluorine Tube," which has a fluorine resin in the innermost layer, providing excellent chemical resistance. 【Common Features】 ■ It is semi-transparent, allowing for visibility of the fluid inside. ■ By incorporating an anti-static resin in the outer layer (volume resistivity α × 10^6–10^8 Ω·cm), it prevents dust adhesion due to static electricity. ■ There is no reduction in the anti-static effect from wiping or friction on the tube surface. ■ It is non-bleeding, making it suitable for use in clean rooms. *For more details, please download the PDF or feel free to contact us.

The flexible eco tube "Ecoflex" is an eco tube that excels in ozone resistance. It is highly transparent and a non-bleeding tube, making it suitable for clean rooms and pure water piping. The gas emitted during incineration (at 750°C) is only carbon dioxide. Additionally, we offer a "high-pressure type" that has excellent cold and heat resistance, as well as an "antistatic type" with low volume resistivity to prevent dust adhesion due to static electricity. 【Features】 ■ Excellent flexibility ■ Complies with the Food Sanitation Act (Ministry of Health and Welfare Notification No. 370) ■ The gas emitted during incineration (at 750°C) is only carbon dioxide, with no dioxin generation, making it an ecological tube. *For more details, please download the PDF or feel free to contact us.

The U-9500 is a U-flex tube made from ether-based polyurethane material, which offers excellent water resistance. It is highly flexible and also excels in abrasion resistance and bending fatigue resistance, making it suitable for movable parts, narrow spaces, and complex piping. Additionally, we also offer "biomass polyurethane tubes," "soft polyurethane tubes," and "abrasion-resistant tubes." 【Features】 ■ Excellent water resistance due to the use of ether-based polyurethane material ■ Highly flexible, with excellent abrasion resistance and bending fatigue resistance, suitable for movable parts, narrow spaces, and complex piping ■ Excellent cold resistance, with impact resistance in environments as low as -40°C ■ Non-bleeding, allowing for use in clean rooms *For more details, please download the PDF or feel free to contact us.

The "PET(D63)" is a robot air tube that excels in bending fatigue resistance and wear resistance, making it suitable for piping in movable and sliding parts. Due to a special manufacturing process, the tube surface is finished with a matte texture, which reduces friction resistance on the tube surface, allowing for smooth movement even in movable parts. The inner surface remains smooth, so there is no impact on fluid pressure loss. Please feel free to contact us when you need assistance. 【Features】 - Excellent bending fatigue resistance and wear resistance, ideal for piping in movable and sliding parts. - The special manufacturing process provides a matte finish on the tube surface, reducing friction resistance and enabling smooth movement in movable parts. - Excellent cold and heat resistance, usable in a wide range of temperature environments. - Complies with the Food Sanitation Act (Ministry of Health and Welfare Notification No. 370). - Non-bleeding, making it suitable for use in clean rooms. *For more details, please download the PDF or feel free to contact us.

The "Amidoflex AX-1200" is a nylon tube that excels in heat and cold resistance, suitable for use under a wide range of temperature conditions. It is produced primarily from polyamide 11, which is made from hemp seeds. Additionally, we offer the "Superflex F-1500," which has flexibility and is suitable for piping in tight spaces and complex piping systems. 【Features】 ■ Excellent heat and cold resistance, usable under a wide range of temperature conditions ■ Excellent chemical resistance, particularly oil and gasoline resistance ■ Excellent pressure resistance, usable under a wide range of pressure conditions *For more details, please download the PDF or feel free to contact us.

We would like to introduce the "Speed Controller" that we handle. Installation is complete simply by inserting the tube lightly. It can be easily removed by pulling out the tube with one hand while pressing the push ring. We offer a rich lineup including the "SCZ" with excellent flow characteristics, the "SCM" for low-speed speed controller settings, and the inline type "ISC." 【Common Features】 ■ One-touch fitting that requires no tools ■ Brass components use cadmium-regulated materials (containing less than 75ppm) ■ Fluororesin coating on threaded parts ■ Use of white flame-retardant resin ■ Brass parts are electroless nickel plated *For more details, please download the PDF or feel free to contact us.

The "Z-JOINT" is a tool-free quick-connect fitting. There is no need for a tool workspace when attaching or detaching the tube. Additionally, the structure allows for the main body’s threaded part to be rotated, enabling free changes in piping direction, making piping work in tight spaces easier. Moreover, the brass parts have improved aesthetics and corrosion resistance due to electroless nickel plating. 【Features】 ■ Tool-free quick-connect fitting ■ Significantly reduces piping space ■ Made with white flame-retardant resin ■ Brass components use cadmium-regulated materials (containing 75ppm or less) ■ Brass parts feature electroless nickel plating ■ Fluororesin coating on the threaded parts *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "Miniature Fittings." The fluids used are air, water, and oil. The main components are made of SUS316 for the metal parts and PTFE for the seals. This product is compact in size, maximizing the use of minimal space. 【Features】 ■ Compact size that maximizes the use of minimal space ■ Lightweight and compact for cost reduction *For more details, please download the PDF or feel free to contact us.

We would like to introduce our needle valve "RNAW." The fluids used can be air, water, or oil, with a pressure range of 0 to 2 MPa (20 kgf/cm²). It excels in flow characteristics, corrosion resistance, and chemical resistance. Additionally, we offer "DAVS," which reduces flow variation caused by the opening and closing of the needle. 【Features】 ■ Excellent flow characteristics, corrosion resistance, and chemical resistance ■ Compact and functional ■ Usable in various fields *For more details, please download the PDF or feel free to contact us.

The "SCS" is a stainless steel speed controller. It excels in flow characteristics, corrosion resistance, and chemical resistance, and is compact and functional. It can be used in various fields. Please feel free to contact us if you have any requests. 【Features】 ■ Excellent flow characteristics, corrosion resistance, and chemical resistance ■ Compact and functional ■ Usable in various fields *For more details, please download the PDF or feel free to contact us.

We would like to introduce our stainless steel check valve 'CVB'. The cracking pressure is below 5 kPa, and the back pressure is above 10 kPa. The packing and valve body are integrated, which ensures stable sealing performance. Additionally, we also handle the 'CVH', which features a metal sealing mechanism that minimizes fluid adhesion at the sealing area. 【Features】 ■ Stable sealing performance due to the integration of packing and valve body ■ All metal components are made of SUS316 ■ A variety of diameters available *For more details, please download the PDF or feel free to contact us.

"PS Fit" is a PEEK fitting with excellent flow characteristics. We offer a wide range of products, including the half union "PSH," the elbow union with packing "PSL-GNT," and the T-type union "PST." This product enables weight reduction. Please feel free to contact us when you need assistance. 【Features】 ■ Improved work efficiency ■ Fittings with excellent flow characteristics ■ Enables weight reduction *For more details, please download the PDF or feel free to contact us.

The "BW" is a W-interlock type tightening joint made entirely of brass for the joint body, nut, and ferrule. The applicable types of pipes are oxygen-free copper pipes (C1020), tough pitch copper pipes (C1100), and phosphorus deoxidized copper pipes (C1201, C1220) as specified in JIS H3300. In addition, we also offer "double touch type tightening joints," "BE-fit tightening joints for blade hoses (brass model)," and "joints with resin sleeve inserts." 【Features】 ■ Resistant to high pressure, high temperature, and low temperature ■ Ideal sealing with low tightening torque and no twisting ■ Strong against shock and vibration ■ Does not cause galling on the threads of the nut ■ Usable for vacuum lines ■ Excellent for repeated attachment and detachment *For more details, please download the PDF or feel free to contact us.

"Esfit/LS Fit" is a stainless steel fitting with excellent flow characteristics. The Easy Fit mechanism (integrated nut and sleeve) improves work efficiency. With a wide variety of sizes available, it fits various types of tubes. Additionally, we also offer "BE-fit blade hose fittings" and "W-interlock fittings." 【Features】 ■ Improved work efficiency with the Easy Fit mechanism (integrated nut and sleeve) ■ Unique sleeve design by Aoi eliminates twisting of the tube during piping ■ No need to replace the sleeve even after repeated use ■ Oil-free treatment has been applied ■ The main body, nut, and sleeve are made of SUS316, providing excellent corrosion resistance *For more details, please download the PDF or feel free to contact us.