藤川伝導機 List of Products and Services

This catalog introduces YUSHIN's "Disc Brake," which we handle. It provides detailed explanations using diagrams and tables regarding usage and safety precautions, usage examples, and calculation formulas for selection. This is a useful reference, so please make sure to utilize it when selecting products. 【Contents (Excerpt)】 ■ What is a Disc Brake ■ Points to Note for Use ■ Safety Precautions ■ Examples of Disc Brake Usage ■ Technical Data, Terminology, Lifespan, Correction Factors ■ Characteristics of Electromagnetic Clutches and Brakes, SI Unit Conversion Table *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the 'JSY3000-S Series' manifold with SUS plate that we handle. There are five types of wiring methods: D-sub connector, flat cable, terminal box, lead wire, and serial units (EX600, EX245, EX250, EX260). Additionally, we offer options such as trim plates, bottom packing, and blanking plates. 【Options】 ■ Trim Plate ■ Bottom Packing ■ Blanking Plate ■ Standalone SUP. Spacer ■ Standalone EXH. Spacer ■ FDA-compliant pipe fittings/SUS316 quick-connect pipe fittings *For more details, please download the PDF or feel free to contact us.

The "JMB Series" is an air cylinder that can reduce air consumption by up to 29% with low air usage and appropriate size selection. We have added a double-side tapped mounting support type. This reduces the protrusion from the end face of the tie rod and shortens the overall length. With the unadjusted air cushion method, there is no need for air cushion adjustment, and the built-in rubber cushion reduces metallic noise when the piston stops. 【Specifications (partial)】 ■ Operating method: Double-acting rod ■ Fluid used: Air ■ Guaranteed pressure resistance: 1.0MPa ■ Maximum operating pressure: 0.7MPa ■ Minimum operating pressure: 0.05MPa *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the lifespan-enhancing cylinder 'CQS-XB24' handled by Fujikawa Denko Co., Ltd. Thanks to new technology, durability has increased by more than four times, and maintenance frequency has been reduced. The specifications and external dimensions are the same as the existing products (thin cylinders/compact type CQS Series). 【Specifications (partial)】 ■ Operating method: Double-acting rod ■ Fluid used: Air ■ Lubrication: Not required (oil-free) ■ Guaranteed pressure resistance: 1.5MPa ■ Maximum operating pressure: 1.0MPa *For more details, please refer to the PDF document or feel free to contact us.

The "BE1/BE6H" is a bellows valve suitable for steam applications that does not seize or leak. By eliminating leaks from the gland area, it not only prevents steam loss but also eliminates causes of seizing such as stem rust and excessive tightening. We offer the "BE1," which solves the issues of gland leakage and handle seizing all at once, and the "BE6H," which has a full port and a wide range of sizes to accommodate various applications. 【Features】 ■ Prevents stem corrosion (BE1 only) ■ Prevents gland leakage ■ Excellent durability and reliable sealing *For more details, please refer to the PDF document or feel free to contact us.

The SF1 is a separator filter that can maintain filter performance for a long time due to the cyclone effect. By eliminating drains, larger debris, and scale with the separator, the lifespan of the filter is extended. This prevents a decrease in heating efficiency of the equipment and improves quality. Additionally, because it uses a Heller system, disassembly and replacement are easy. It can be utilized in applications that require high-quality steam, such as in processes and the bio field. 【Features】 ■ Clamp structure ■ Made of all stainless steel ■ Improved dryness of steam ■ Centrifugal separation of drains, debris, and scale *For more details, please download the PDF or feel free to contact us.

The "High Durability Series" is a "special specification" dust-proof cylinder that excels in durability and environmental resistance compared to standard products. It is compatible with ceramic powders, toner powders, paper dust, and metal powders with particle sizes ranging from 20 to 100 μm, allowing for selection based on usage applications. Additionally, the rod cover assembly can be replaced according to the usage environment. Please feel free to contact us if you have any requests. 【Features】 ■ Durability up to 6 times greater in dust environments ■ Selection available based on usage applications ■ Rod cover assembly can be replaced according to the usage environment *For more details, please download the PDF or feel free to contact us.

The document includes proposals for sustainable factories, such as "optimization," "resource conservation," and "energy saving." It provides detailed information on the air management system that enables visualization of production equipment status, as well as the reduction of pressure in factory lines through local pressurization and local boosting, starting with successful case studies by application. The content is presented with photos and diagrams, making it easy to reference. Please feel free to download it and take a look. 【Contents】 ■ Air Management System ■ Line Pressure Reduction ■ Air Blow Efficiency ■ Energy-Saving Equipment ■ Compact and Lightweight Design ■ Low Wattage *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "Compressed Air Purification Filter." It reduces weight by 50% and dimensions by 30% in terms of spacing and depth, and allows for modular connections. Additionally, it monitors clogging status with a clogging switch output. Moreover, thanks to the stopper function that prevents the case from falling, the case will not drop even if all bolts are loosened. 【Features】 ■ Contributes to energy savings by reducing pressure drop ■ Space-saving and reduced labor ■ Quantifies the clogging status of each filter element ■ Improved workability during element replacement ■ Notifies when it's time to replace the element ■ Lightweight *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our 3-screen, 4-channel flow monitor, the 'PFG200 Series'. By displaying the display items and setting values simultaneously, we can achieve visibility of the setting items, and it can manage the cumulative flow of 4 lines with just one unit. There are four variations of applicable flow sensors, including digital flow switches for air and three-color display digital flow switches for water. 【Features】 ■ Visualization of setting items ■ Easy screen switching ■ Simple 3-step setup ■ Reduction of installation space through centralized management ■ Cumulative flow measurement ■ Management of different applications with one monitor *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our lifespan-enhancing cylinder, double-acting with a single rod, 'CM2-XB24'. This product offers over four times the durability compared to existing products, achieving a reduction in maintenance frequency. We offer four types of cylinder tube inner diameters: 20, 25, 32, and 40 mm. The operating method is double-acting with a single rod, and the standard stroke ranges from 25 to 300 mm. 【Specifications (partial)】 ■ Type: Pneumatic ■ Fluid used: Air ■ Guaranteed pressure resistance: 1.5 MPa ■ Maximum operating pressure: 1.0 MPa ■ Minimum operating pressure: 0.05 MPa ■ Lubrication: Not required (oil-free) *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our longevity-enhancing cylinder, the 'CJ2-XB24'. Thanks to new technology, its durability has improved by more than four times. The specifications and external dimensions are the same as those of existing products (Air Cylinder CJ2 Series). It also achieves a reduction in maintenance frequency. Please feel free to contact us when you need assistance. 【Specifications (Excerpt)】 ■ Operating method: Double-acting rod ■ Fluid used: Air ■ Guaranteed pressure resistance: 1MPa ■ Maximum operating pressure: 0.7MPa ■ Minimum operating pressure: 0.12MPa, 0.06MPa ■ Cushion: Rubber cushion *For more details, please refer to the PDF document or feel free to contact us.

We are introducing the oil contamination management tool "Micro Separator" from San-Ei Industrial Co., Ltd. It can be easily removed for maintenance and can be installed between the return oil side of the oil tank and the strainer. The magnetic field of this product promotes the aggregation and sedimentation of sludge-like contaminants dispersed in the oil, preventing the circulation and proliferation of contaminants. 【General Specifications (Materials)】 ■ Surface and sides: SUS304 ■ Bottom: Epoxy resin, SUS304 ■ Magnet: Strontium ferrite ■ Mounting bolts: Alloy steel *For more details, please refer to the PDF document or feel free to contact us.

This catalog introduces the general-purpose robot hand "Vacuum Gripper," which reduces "step changes." We offer a variety of products, including the lightweight Vacuum Gripper FQE and the Vacuum Gripper FXP/FMP. We have included the features of each product and the composition of the grippers, so please take a moment to read through it. [Contents (excerpt)] ■ Product lineup ■ Packaging and logistics industry ■ Steel plate and automotive industry ■ Wood industry ■ Lightweight Vacuum Gripper FQE ■ Lightweight Vacuum Gripper FQE-120x60 (sponge type) *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our direct-acting pressure reducing valve for steam and air, the 'DR20/A-DR20'. The main body and key components are made of stainless steel, which prevents issues such as the leaching of lead, rust, and the occurrence of red water, as well as problems caused by biting. By adopting a flat valve design, it maintains a stable secondary pressure that is not found in typical direct-acting pressure reducing valves. 【Features】 ■ Made of stainless steel ■ Pressure reduction ratio of 30:1 ■ Compact and lightweight ■ Excellent flow characteristics ■ Micro-pressure adjustment function *For more details, please refer to the PDF document or feel free to contact us.

The "GT Series" is a steam trap with a built-in pump function that effectively addresses various issues faced by steam-using devices with poor drainage. It comes pre-packaged with essential equipment for power traps, such as drain headers, check valves, and inlet valves, all in a compact design. This significantly reduces the effort required for system construction and piping design and installation. Additionally, we also offer the "GP Series," a mechanical pump that does not require electricity. 【Features】 <GT Series> ■ Hybrid system of trap and pump ■ System package ■ Easy installation ■ Significant reduction in the effort required for system design and piping design and installation ■ Eliminates stalls caused by insufficient differential pressure *For more details, please refer to the PDF document or feel free to contact us.

The "Mechanical Pump Package" is a pump that collects drain using the pressure of the operating gas as a power source, without using electricity. Unlike electric pumps, no electrical work is required; you only need to connect five piping points. It can be introduced in places without electrical equipment or in explosion-proof areas, making it easy to collect drains. 【Features】 ■ No electricity required ■ Reduces costs and construction time as no instrumentation work is needed ■ Easy to install due to its packaged design ■ Allows for easy drain collection ■ Simple maintenance ■ Peripheral equipment is already installed with piping *For more details, please refer to the PDF document or feel free to contact us.

The "DC Series" is a separator that forcibly separates condensate in piping. It separates water droplets contained in steam with 98% high efficiency. Due to the built-in free float steam trap, there is no delay in the discharge of condensate. Additionally, we offer the separator filter "SF1" and the pressure reducing valve "COS Series." Please feel free to contact us when you need assistance. 【Features】 < Cyclone Separator DC Series > ■ Forcibly separates condensate in piping ■ Separates water droplets contained in steam with 98% high efficiency ■ No delay in the discharge of condensate due to the built-in free float steam trap * For more details, please refer to the PDF document or feel free to contact us.

The high-capacity vacuum breaker "VB3/VB3-H" is a device designed to prevent damage to equipment such as water supply lines and tanks. It features a no-hinge, no-lever free float and a spring disc check valve (non-return valve) that moves with minimal failure and has a long lifespan. For seawater applications, it uses super duplex stainless steel, which is highly resistant to corrosion. Please feel free to contact us if you have any inquiries. 【Features】 ■ Compact design with high intake capacity ■ Long lifespan ■ Nitrile rubber is used for the sealing part, providing high sealing performance ■ Initial rapid exhaust valve function ■ Super duplex stainless steel is used for seawater applications, offering excellent corrosion resistance *For more details, please refer to the PDF materials or feel free to contact us.

The "SR-3/SR-8" is an atmospheric open-type waste steam heat exchanger that is easy to introduce as it is not subject to pressure vessel regulations. The produced hot water can be used for pre-washing and pre-heating of products, as well as for bottle washing and post-cleaning water. Additionally, we offer waste high-temperature water heat exchangers "SR-B1.5" and "SR-B4," which can recover heat from continuously discarded boiler blowdown water and boiler feedwater, raising the feedwater temperature and reducing fuel consumption. 【Features】 ■ Energy saving through heat recovery ■ High installation flexibility ■ Indirect heat exchanger made of all stainless steel ■ Capable of obtaining clean hot water ■ Usable for a variety of applications *For more details, please refer to the PDF materials or feel free to contact us.

The "CV Series" is a control valve that contributes to users' energy savings and cost reduction by providing optimal control, design, and flexibility while eliminating all waste. We offer two models: the "CV-10," which meets various needs with high reliability and a rich lineup, and the cost-effective smart model "CV-5." We also have peripheral devices available, so please feel free to contact us when needed. 【Features】 <CV-10> ■ Achieves long lifespan ■ Stable vibration ■ Reduces noise ■ Lightweight and compact design ■ Significantly reduces maintenance work *For more details, please refer to the PDF materials or feel free to contact us.

The "Control Panel Mini" is a compact wall-mounted control panel that incorporates a PID controller. It is suitable for simple automatic control, replacing cumbersome manual adjustment tasks with control valves. Automatic control can be achieved simply by connecting the control valve and sensor to this product. Additionally, once the application is determined, there is no need to select a controller or design a control panel for storage, making installation and setup easy. 【Features】 ■ Increased productivity and quality ■ Cost reduction ■ No need to select a controller ■ No need to design a control panel for storage ■ Easy installation and setup *For more details, please refer to the PDF materials or feel free to contact us.

The "CV-COS" is a new type of control valve equipped with an air-driven actuator that adds the function of improving "steam quality." Its integrated structure with the positioner achieves compactness. Zero adjustment is easy and requires no tools. Since it adopts a free float type, drainage can be continuously eliminated even when the control valve is closed. 【Features】 ■ Achieves compactness ■ Zero adjustment is easy and requires no tools ■ Prevents water hammer through drainage elimination ■ Separates and eliminates droplets contained in steam with 98% high efficiency ■ Eliminates scale with a large area screen *For more details, please refer to the PDF document or feel free to contact us.

The "PN-COS" is a pneumatic control valve that instantly absorbs fluctuations in primary side pressure and flow, continuously supplying stable pressure steam to the secondary side. It enables PID control when combined with a pressure gauge and an electro-pneumatic regulator. Based on pressure control, it can also accommodate temperature control depending on the conditions. Additionally, we offer the cost-effective control valve and pressure reducing valve "PN-COSR," which can be used in applications where dry steam is already being supplied, such as with separators. 【Features】 ■ PID control capability ■ Usable in high temperature, high humidity environments and explosion-proof areas ■ Can be operated manually from a distance and set for two-point operation ■ Maintains steam supply even when the supply air is cut off ■ Strainer ■ Cyclone separator *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our "Control, Switching, and Disconnect Series" that we handle. The Control Series includes the "Chemifit C1 Speed Controller," which is suitable for environments requiring chemical resistance, and the "Compact Speed Controller," which is more compact compared to conventional sizes and features a push-one connection. Additionally, we offer the "Ball Valve" that allows for compact piping in the Switching Series, and the "Valve Embedded Connector," which opens and closes the valve inside the fitting by disconnecting and connecting the tube in the Disconnect Series. Please feel free to consult us when you need assistance. 【Product Lineup (Partial)】 ■ Control Series - Chemifit C1 Speed Controller - Compact Speed Controller - Speed Controller - Throttle Valve - Miniature Valve *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the "Modular Type F.R.L. Combination" that we handle. It features a two-layer structure with a transparent case guard that covers the entire circumference of the case. It allows for 360° visual confirmation, protecting the case from external environments and enhancing safety. Additionally, the light angle rectangular pressure gauge enables pressure confirmation from the handle side. Please feel free to consult us when you need assistance. 【Features】 ■ Improved visibility and environmental resistance ■ Adoption of transparent case guard ■ No tools required ■ Selectable pressure gauge ■ Easy-to-use handle shape *For more details, please refer to the PDF document or feel free to contact us.

The "LEKFS Series" is an electric actuator with a slider type that has improved moment resistance by up to 61%. Equipped with a battery-less absolute encoder, it allows for restart from the stop position when power is restored. There is no need for battery management or replacement, reducing maintenance efforts. Additionally, it can be equipped with auto switches, enabling position detection of the table throughout the entire stroke. Please feel free to consult us when needed. 【Features】 ■ Moment resistance improved by up to 61% ■ Maximum reduction of table displacement by 50% ■ Equipped with a battery-less absolute encoder ■ Repetition positioning accuracy: ±0.01mm ■ Improved moment resistance *For more details, please refer to the PDF document or feel free to contact us.

The "LEFS□G Series" is a power actuator with a high-tactile slider type. It supports a battery-less absolute encoder, which is mounted on the motor and continuously retains position information regardless of the ON/OFF state of the control power supply. There is no need for origin return when power is restored. Additionally, the absence of a battery reduces maintenance workload. There is no need for a battery to retain position information, eliminating the need for managing spare batteries, recycling, or replacement work. 【Features】 ■ Easy resumption of operation when power is restored ■ Reduced maintenance workload due to the absence of a battery *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the "Free Ball Bucket Steam Trap" that we handle. This product ensures a reliable seal at all times through a three-point support system consisting of a drain jet (valve seat) and two cover guides located on the lid. Additionally, during cold conditions, the bimetal pushes the free ball bucket, forcibly opening the valve and rapidly eliminating initial air, which can shorten the startup time. 【Features】 ■ Reliable sealing ■ Time reduction ■ Excellent durability ■ Clogging prevention *For more details, please refer to the PDF document or feel free to contact us.

Introducing the "Hydraulic Unit" manufactured by Cosmech. With a newly developed high-flow air-hydro combination pump, operating time is reduced by 50%. Equipped with a pressure compensation valve, it responds to temperature changes. It is compact and achieves high pressure with a large discharge volume. 【Features】 ■ 50% reduction in operating time ■ Compact and space-saving ■ Pressure tracking during hydraulic drop ■ Pressure compensation during hydraulic rise ■ Pressure compensation with no leaks ■ Increased flow rate for faster clamping speed *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the "tube cutters, tools, and accessories" that we handle. Starting with the compact and lightweight tube cutter "TC04," which is convenient for portability, we also offer hose cutters and a dedicated outer layer cover peeling cutter for FW tubes. In terms of tools and accessories, we have spatter caps and tube removal jigs (off-tools) available. 【Features】 <Tube Cutter TC04> ■ Compact and convenient for portability ■ Lightweight ■ Only the blade part can be replaced ■ Set of 3 replacement blades ■ Capable of cutting tubes up to 16mm *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce our one-touch pipe fitting nozzle 'KNA(G)-Q10-180'. It complies with OSHA standards (1910.242(B)). The outlet is designed to be unsealed, ensuring that only 30 psi of pressure is exerted even if the operator comes into contact with the nozzle, making it a safe design. Additionally, it allows for a significant reduction in air consumption while maintaining a blow range equivalent to that of a comb nozzle. Please feel free to contact us if you would like to place an order. 【Features】 ■ Complies with OSHA standards (1910.242(B)) ■ The outlet is designed to be unsealed ■ Safe design that exerts only 30 psi of pressure even if the operator comes into contact with the nozzle ■ Significant reduction in air consumption while maintaining a blow range equivalent to that of a comb nozzle ■ Lower noise compared to nozzles with male threads at the same impact pressure *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our small-scale speed controller, the 'AS-FSA Series'. The height dimension has been reduced by up to 5.5mm. With the auxiliary scale display, fine adjustments can be made in increments of 1/4, reducing work hours and setting errors. Additionally, inspection and maintenance tasks are made easier with the ability to check from all 360° directions. Please feel free to contact us if you have any inquiries. 【Features】 ■ Flow rate can be managed numerically through the scale window ■ Height dimension reduced by up to 5.5mm ■ Fine adjustments possible in increments of 1/4 with the auxiliary scale display ■ Reduces work hours and setting errors ■ Inspection and maintenance tasks are made easier with 360° visibility *For more details, please refer to the PDF document or feel free to contact us.

The mechanical pump "GP Series" is a drain recovery pump that does not require electricity. The power source is steam or compressed air available on-site. It utilizes the pressure of the operating gas (steam, compressed air, nitrogen) to powerfully pump the drain. Additionally, we also offer the "GT Series," which combines a mechanical pump with a steam trap. 【Features】 <GP Series> ■ No electricity required ■ Easy drain recovery ■ System package ■ Significantly reduces the effort required for system design and piping design/construction *For more details, please refer to the PDF materials or feel free to contact us.

This document is a technical and reference material for "tubes and tube fittings." The technical material includes flow characteristics of speed controllers, effective cross-sectional areas, a list of negative pressure performance, and operating manuals for each product. The reference material includes TES tube technical data, a list of applicable standards, a list of thread standards, and full-size tables for tubes and threads. [Contents (excerpt)] ■ Technical Material - Flow characteristics of speed controllers - Effective cross-sectional area - List of negative pressure performance - Operating manuals *For more details, please refer to the PDF document or feel free to contact us.

The "AMS20/30/40/60 Series" is an air management system that reduces air consumption by lowering pressure during production stoppages or equipment standby times. By using a residual pressure exhaust valve to cut off the air supply, further reductions in air consumption are possible. Additionally, it is equipped with an automatic isolation mode that can be activated to shut off after a set time from standby mode. 【Features】 ■ Reduces air consumption by cutting off valves during equipment downtime ■ Visualizes production equipment status ■ Compatible with SMC wireless systems ■ High security through encryption ■ Can be retrofitted to existing equipment *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our longevity-enhancing cylinder, the 'CU-XB24'. Compared to existing products, it has over four times the durability. The standard strokes are as follows: ø6, ø10, ø16 are 5-30, and ø20, ø25, ø32 are 5-50. The cushion is a rubber cushion. Please feel free to consult us when you need assistance. 【Specifications (partial)】 ■ Operating fluid: Air ■ Guaranteed pressure resistance: 1.05MPa ■ Maximum operating pressure: 0.7MPa ■ Lubrication: Non-lubricated ■ Operating piston speed: 50-500mm/s ■ Rod end thread: Male thread *For more details, please refer to the PDF document or feel free to contact us.

The "RT3A" is a radiator trap designed with a large valve opening and valve passage area, allowing for quick blowing of debris and scale. By adopting a spherical ball valve, it achieves a reliable seal. It has minimal steam leakage and excellent durability. Additionally, the over-expansion absorption effect of the coil spring inside the cover extends the lifespan of the thermo element. 【Features】 ■ Just open the valve when the heating season starts ■ No troublesome tasks required at the beginning of ventilation ■ Internal component replacement is a one-touch operation by simply opening the cover ■ A wrench can be applied to the piping nipple, making maintenance after installation easy *For more details, please refer to the PDF materials or feel free to contact us.

The "LET-X11 Series" is a large slider type belt-driven electric actuator. It allows for easy replacement of the timing belt without interference with the work motor. Contactless auto switches can be installed (for limit confirmation and intermediate signal confirmation). Additionally, we offer a wide range of "AC servo motor drivers." Please feel free to contact us when needed. 【Features】 ■ Slim and low center of gravity ■ Easy replacement of the timing belt ■ No interference with the work motor ■ Contactless auto switches can be installed (for limit confirmation and intermediate signal confirmation) ■ Improved maintenance when replacing the belt *For more details, please refer to the PDF materials or feel free to contact us.

The "CY3B Series" is a magnetically operated rodless cylinder that has reduced mass through its body, head cover shape, and magnetic coupling. A lubricant retainer is placed in the piston area to maintain lubrication, ensuring that a lubrication film is always formed, which improves lubrication performance. By extending the body-side wear ring by up to 30%, smooth operation has been achieved. Please feel free to contact us when you need assistance. 【Features】 ■ Lightweight ■ Improved lubrication ■ Stable operation *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the pilot check valve compact type, "AKP Series," which we handle. We offer two types: one with a "residual pressure exhaust function" that allows for the construction of a safety circuit, and another without the "residual pressure exhaust function" that enables temporary intermediate stops. Please feel free to contact us when you need assistance. 【Features】 ■ Vertical/horizontal types available according to installation conditions ■ Improved piping flexibility (360° rotating type) *For more details, please refer to the PDF document or feel free to contact us.

This catalog mainly introduces "AIRCOM," designed for the supply and distribution of compressed air up to a maximum pressure of 1.6 MPa. It explains the products we handle, application fields/safety, and features of materials, as well as information about the Quick Line system. Additionally, the assembly manual provides an introduction to the tools needed for installation and clearly explains the assembly methods for each product with accompanying photos. [Contents] ■ Introduction of each product ■ Technical documentation ■ Assembly manual ■ Quick Line aluminum piping - Technical data sheet ■ Quick Line reinforced polymer - Technical data sheet ■ Quick Line aluminum - Technical data sheet *For more details, please download the PDF or feel free to contact us.

The "LEX3N-TZ/LEX8-TZ" is a trap that allows you to set the temperature of the discharge drain as desired. By adjusting the set temperature, it maintains the oil or liquid in the oil supply pipe and heating tank at the required temperature. Additionally, it saves steam through proper heating. While still piped, it allows for free adjustment of the drain discharge temperature, enabling the quick expulsion of initial air and drain without causing air disturbances. 【Features】 ■ Maintains the oil or liquid in the oil supply pipe and heating tank at the required temperature ■ Saves steam through proper heating ■ Prevents steam leakage ■ Allows free adjustment of drain discharge temperature while still piped ■ Quickly expels initial air and drain *For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce the "standard pressure gauge" that we handle. This pressure gauge has a structure that transmits the elastic deformation (movement) of the Bourdon tube to the pointer, making it easy to handle due to its simple design. We offer four types: vertical A frame, B frame, C frame, and embedded D frame, with sizes available in φ60, φ75, φ100, and more. 【Features】 ■ The model number (7 digits) is located below the scale mark (only for vertical φ75 and φ100) ■ Compliance with standard certification marks (type approval) is possible (depending on size, accuracy, and pressure range) ■ It has a wide pressure measurement range and can also meet requirements for corrosion resistance *For more details, please refer to the PDF materials or feel free to contact us.

The "Quick Seal Series Insert Type (Stainless Steel Specification)" is a threaded fitting for multi-purpose piping. The maximum operating pressure is 5.0 MPa, and the negative pressure performance is -101.294 kPa. The body and insert are integrated, providing excellent negative pressure performance. Please feel free to consult us when you need assistance. 【Features】 ■ Threaded type ■ Exhibits strong sealing performance ■ Made of SUS304, offering excellent corrosion resistance ■ Compliant with JIS B 8381-1995 (Fittings for pneumatic flexible pipes) *For more details, please refer to the PDF document or feel free to contact us.