藤川伝導機 Product Lineup

The "AP20-D" is a modular type relief valve that releases pressure above the set value to the atmosphere, maintaining the set pressure. In conventional designs, the air inlet and exhaust ports are aligned in a straight line, requiring branching pipes for connection to downstream equipment. However, by using a modular connection, we have reduced piping labor and eliminated the need for branching pipes. Additionally, you can choose from square embedded pressure gauges, round pressure gauges, and round pressure gauges with color zones, and the handle shape is designed to be easy to operate with fingers during unlocking. 【Features】 ■ Reduced piping labor ■ Selectable pressure gauges ■ Easy-to-operate handle shape *For more details, please download the PDF or feel free to contact us.

• valve

The "PFES Series" is a remote control valve (electric speed controller) that has become capable of "remote operation" through "electrification" by incorporating a motor into the speed controller. It allows for adjustment of the actuator's speed and the device's flow rate "from a remote location," "without going to the site," and "without stopping the equipment." Additionally, if you are unable to send electrical signals immediately on-site, manual adjustments using a handle are also possible. 【Features】 ■ Improved maintainability ■ Reduced adjustment labor ■ Increased productivity ■ Reduced downtime ■ Remote operation ■ Electrification *For more details, please download the PDF or feel free to contact us.

• controller

We would like to introduce the vacuum pad with anti-slip feature, the 'ZP3M Series', handled by Fujikawa Conductive Co., Ltd. By adopting the highly wear-resistant FS61 (fluorine-based rubber), the lifespan has improved to more than twice that of urethane, reducing the frequency of pad replacements. Additionally, the diagonal ribs are arranged radially to ensure grip in all directions, preventing lateral slipping of the workpiece and enabling stable suction transport. 【Features】 ■ Improved lifespan (more than twice that of urethane) ■ Anti-slip special ribs ・Prevents lateral slipping of the workpiece ・Enables stable suction transport ■ Compatible with oil film-covered workpieces *For more details, please download the PDF or feel free to contact us.

• Other machine elements

This catalog provides a comprehensive introduction to refrigerated air dryers designed for the EU, Asia, and Oceania markets. In addition to the standard "IDFA□E/□ Series," we also introduce the large "IDFA□F Series," which is designed for high-temperature environments, reduces heat discharge by up to 25%, and helps suppress ambient temperature rise with its energy-saving design. Furthermore, we have included information on how to select models, standard specifications, structural principle diagrams (air and refrigerant circuit diagrams), and external dimension diagrams, so please make use of these resources. [Included Content (Partial)] ■ Standard Series IDFA3E–15E1 ■ Standard Series IDFA60–90 ■ Large Series IDFA100F–150F *For more details, please download the PDF or feel free to contact us.

• Cooling Equipment

We would like to introduce the "Mounting Kit for Multi-Axis Systems" handled by Fujikawa Denko Co., Ltd. This product enables the realization of an XYZ unit and allows for easy system construction using the equipment selection program. For compatible actuators, the X-Y axis options include ball screw drive, belt drive, and high-rigidity high-precision slide types, while the Z axis is available in a guide rod type. 【Compatible Controllers/Drivers (for Single Axis)】 ■JXC51/61 Series ■JXC91/E1/P1/D1/L1/M1 Series ■LECS□-T/LECY□ Series *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "CKZ5T Series" is a power clamp cylinder that achieves miniaturization through a new structure, shortening the overall length by up to 49mm. It features a fully closed structure made of an aluminum body, resulting in significant weight reduction, with a mass decrease of up to 23%. Additionally, the depth has been reduced by up to 17.3mm. It is compatible with existing products "CKZT" and "CKZ3T." 【Features】 ■ Miniaturization achieved through a new structure (overall length shortened by up to 49mm) ■ Depth reduced by up to 17.3mm ■ Significant weight reduction due to aluminum body (mass reduced by up to 23%) ■ Added sizes of ø40 and ø80 ■ High clamping force of 4000N (ø63, arm length 100mm, at 0.5MPa) *For more details, please download the PDF or feel free to contact us.

• cylinder

The "Air Servo Cylinder" is a device that enables multi-point positioning and control of air cylinders. It features easy maintenance due to its unitized design, allowing for the replacement of valve units, pilot valves, controller assemblies, packing sets, and more. Additionally, if the supply of air and electricity to the air servo cylinder is stopped, the air from the emergency tank can be supplied to the FA and FB ports, allowing for manual operation of the air cylinder's rod. 【Features】 ■ Fast response and high repeat positioning accuracy ■ Easy maintenance due to unitization ■ Simple initial setup ■ Self-diagnosis capability (with LED indicators and signal output) ■ Emergency stop of the piston operation when air and electricity are halted *For more details, please download the PDF or feel free to contact us.

• Other FA equipment

The "Collaborative Robot Air Gripper" is a product that integrates the peripheral devices necessary for gripper operation into a single unit. When selecting the normal open or normal close valve, if power is cut off, the fingers will maintain either the open or closed state. Additionally, we offer three types of grippers: standard type, three-finger type, and long stroke type, depending on the workpiece. 【Features】 ■ Three types of grippers available according to the workpiece ■ Compatible with 12 companies' collaborative robots ■ Air consumption reduced by up to 80% ■ Three types of tool changers can be selected ■ Temporary workpiece drop prevention is possible *For more details, please download the PDF or feel free to contact us.

• Other industrial robots

This catalog provides an overview of the refrigerated air dryer 'IDFB Series' designed for North America and Latin America. It includes a variety of information such as selection methods for models, model designation methods, standard usage, structural principle diagrams, and dimensional drawings. Additionally, it covers optional specifications, separately sold accessories, and individual product precautions, so please make use of it. 【Contents (partial)】 ■IDFB3E–15E ・Optional specifications ・Separately sold accessories ■IDFB60–90 ・Optional specifications *For more details, please download the PDF or feel free to contact us.

• Cooling system

We would like to introduce the various "electromagnetic holders" handled by Fujikawa Denko Co., Ltd. With electrical control, it is possible to remotely operate the ON/OFF of the magnetic force, making it useful for automatic material feeding in presses, preventing deflection of shearing materials, and in various automation equipment and industrial robot gripping parts. We also handle types such as the "thin electromagnetic holder," aimed at space-saving and lightweight design. [Features] ■ Remote operation of magnetic force ON/OFF through electrical control ■ Space-saving and lightweight (thin type) *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the various "Lifting Magnets" handled by Fujikawa Denko Co., Ltd. The "Permanent Magnet Lifting Magnet with V-Type Attachment for Angles" allows for the transportation of equal leg angle steel loaded on-site directly to the next process without any modifications. Additionally, we also offer balance boards that enable two-point lifting when transporting long steel plates, round steel, and pipes by connecting lifting magnets. 【Features】 ■ The V surface fits perfectly with angle steel, achieving more stable lifting. ■ The permanent magnet lifting magnet is equipped with an attachment compatible with both the transported items and equal leg angle steel. *For more details, please download the PDF or feel free to contact us.

• Other conveying machines

The "Electromagnetic Rail Roller" is a product installed inside the belt of a conveyor belt for transportation, supporting the transfer and enhancing work efficiency. It is used for vertical and inclined transportation of actual cans, empty cans, and for transporting press scraps and chips in various conveyor belts during the manufacturing process. Additionally, since it is attracted by magnets, it does not scratch the products or transported items. 【Features】 - Installed inside the belt of a conveyor belt for transportation, supporting the transfer - Attracted by magnets, preventing scratches on products or transported items *For more details, please download the PDF or feel free to contact us.

• roller

We would like to introduce the "Magnet Conveyor" handled by Fujikawa Denko Co., Ltd. The "Spiral Magnet Conveyor" arranges internal magnets in a spiral shape, transporting chips through a spiral sliding movement. As a result, oil droplets can naturally fall off during transportation, allowing for oil removal. The "Magnet Chip Conveyor" transports and removes cutting chips generated from machine tools while allowing for oil removal through natural dripping. 【Features of the Spiral Magnet Conveyor】 ■ The mechanical moving (rotating) parts are enclosed in a sealed cylinder, eliminating concerns about contact damage. ■ Simple structure, requiring almost no maintenance. ■ Energy-saving with the use of permanent magnets. ■ Customizable to your desired length. *For more details, please download the PDF or feel free to contact us.

• Other conveying machines
• Other sorting machines and foreign object removal equipment

We would like to introduce the various "transport assistance tools" handled by Fujikawa Denko Co., Ltd. The "Float Separator" allows for the separation of stacked steel plates during pressing and shearing operations, pulling them apart one by one through magnetic repulsion. The "Thin Float Separator" is thinner and more compact compared to standard models, making it suitable for installation in tight spaces. 【Features of the Float Separator】 ■ Can be used for separation at the outlet of an automatic supply line for steel plates ■ Capable of handling irregularly shaped steel plates, such as press semi-finished products and disc shapes *For more details, please download the PDF or feel free to contact us.

• Other conveying machines

We would like to introduce various "Hand Magnet Tools" handled by Fujikawa Conductive Machinery Co., Ltd. The "Hand Magnet" allows you to easily turn the magnetic force ON/OFF with a light pull of the lever using one hand, releasing the attracted objects. It can be used in various fields such as the collection of metal scraps, material sorting of screws, and chip recovery from casting sand. Additionally, we offer the "Tettori-kun," which is waterproof and can be used for extracting and recovering iron pieces mixed in liquid tanks, as well as the "Tettori-kun Jr," which is useful for removing chips that have gotten into narrow spaces. 【Features of the Hand Magnet】 - Easily turn the magnetic force ON/OFF with a light pull of the lever using one hand, releasing attracted objects. - Usable in various fields such as the collection of metal scraps, material sorting of screws, and chip recovery from casting sand. *For more details, please download the PDF or feel free to contact us.

• Other sorting machines and foreign object removal equipment

We would like to introduce the various "magnetic separation equipment" handled by Fujikawa Denko Co., Ltd. The "permanent magnet suspended magnetic separator" is easy to maintain and robust due to its permanent magnet design, and it does not require a power supply. The "drum separator" features a drum housed within a casing, driven by a motor to rotate the permanent magnet drum. Raw materials are fed from a hopper, and the system automatically separates iron pieces and missing parts from the raw materials. 【Features of the Permanent Magnet Suspended Magnetic Separator】 ■ Easy maintenance ■ Robust ■ No power supply required ■ Weather-resistant mechanism, allowing for outdoor installation *For more details, please download the PDF or feel free to contact us.

• Other sorting machines and foreign object removal equipment

We would like to introduce the various "sanitary" products handled by Fujikawa Denko Co., Ltd. The "strong magnetic bar" features a waterproof structure that allows for use in liquids and is primarily used for the removal of metal foreign substances during the manufacturing processes of food and pharmaceuticals. Additionally, the "strong magnetic lattice-type magnet" is a unit that arranges sanitary specification magnetic bars in a lattice configuration. 【Features of the Strong Magnetic Bar】 ■ High-quality finish with sanitary specifications ■ Waterproof structure suitable for use in liquids ■ Length dimensions can be manufactured to specified sizes *For more details, please download the PDF or feel free to contact us.

• Other sorting machines and foreign object removal equipment

We would like to introduce the "Lifting Magnet" handled by Fujikawa Denko Co., Ltd. This product achieves high magnetic force effects even though it is compact and lightweight, and it does not require a power supply, eliminating issues such as power outages or distribution troubles. Additionally, the CPL-100/CPL-300 models are compatible with balance boards, allowing for the two-point suspension of large steel plates and long round steel bars using a balance board. 【Features】 - No power supply required, eliminating power outages or distribution troubles - High magnetic force effects achieved despite being compact and lightweight - High safety due to strong permanent magnets for adhesion - Compatible with both flat and round steel - CPL-100/CPL-300 models are compatible with balance boards *For more details, please download the PDF or feel free to contact us.

• Other Wagons and Transport

We would like to introduce our standard type "Magnet Base" that we handle. It can be attached to flat surfaces, vertical surfaces, and R surfaces on iron plates and working equipment, holding measuring instruments such as dial gauges. Additionally, we offer various parts such as dial gauge mounting brackets, main columns, support columns, upper brackets, lower brackets, and bases, so please feel free to contact us. 【Features】 ■ Main column 360° turning, 75° tilt possible ■ Fine adjustment function included (CMB-V/R/W only) *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

At Fujikawa Denko Co., Ltd., we sell magnetic base components starting from one piece. By attaching a vice to the tip of the support shaft, it can be used as a fixture for temporarily holding workpieces during assembly or for holding during manual finishing processes. Combining the support and the lower bracket allows for the extension of the gauge mounting section, enabling measurements in areas that standard models cannot reach. 【Features】 ■ Sold from one piece ■ Custom production of shafts and other specified dimensions is possible in small lots *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the flexible type "Magnet Base" that we handle. It can be locked and unlocked simply by tightening the dial, and when unlocking, it loosens from the top, preventing the tip from falling off. Additionally, the arm of the CMB-FX is a flexible type that can be bent freely, and unlike the CMB-FSP, it has a fine adjustment function at the tip. 【Features】 ■ Locking and unlocking can be done simply by tightening the dial ■ When unlocking, it loosens from the top, preventing the tip from falling off ■ The arm of the CMB-FX is a flexible type that can be bent freely ■ The tip of the CMB-FX has a fine adjustment function, unlike the CMB-FSP *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "Holder Base" handled by Fujikawa Denko Co., Ltd. It can be used to set up jigs or poles in screw holes, and can also be utilized for centers and laser bases, functioning as a holder with an ON/OFF magnetic switching mechanism, allowing for various applications. Additionally, we offer the "Magnet Dresser Holder," a dressing tool for grinding magnets that holds the dresser with a magnetic holder base. 【Features】 ■ Can be used to set up jigs or poles in screw holes, as well as for centers and laser bases ■ Prevents the intrusion of unnecessary debris and fine iron powder without ceiling holes (version without tapped holes) *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the "Permanent Magnet Holder" handled by Fujikawa Conductive Co., Ltd. This product can be widely applied for incorporation into press equipment and molds, as well as for workpiece holding. Additionally, versions with screw holes can be integrated into jigs. It can be used for applications such as holding drawings, scales, and small parts. 【Features】 ■ Widely applicable for incorporation into press equipment and molds, as well as for workpiece holding ■ Versions with screw holes can also be integrated into jigs *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce the "welding tools" that we handle. We offer the "CGS Guide Scale," which is expected to improve work efficiency with its strong holding power, and the "CTA-1 Tab Holder," which allows you to secure work during welding with magnets instead of wire. Additionally, we have the "MFT-10 Simple Adjustable Welding Holder," which makes it easy to position sheet materials when welding by holding them on iron square pipes and round pipes. 【Product Lineup (Partial)】 ■ CGS Guide Scale ■ CTA-1 Tab Holder ■ MFT-10 Simple Adjustable Welding Holder ■ CMB Ruler Holder ■ TAW Welding Clamp Holder *For more details, please download the PDF or feel free to contact us.

• Other work tools

We would like to introduce the "Magnet Block" that we handle. The "TT Chuck Block" is used as an auxiliary tool to attract workpieces with shapes that are difficult to adhere to the work surface using only a magnetic chuck. Additionally, we offer the "CMV Magnet V Block," which is used as a precision workholding tool for measuring, drilling, scribing, and wire cutting processes. 【Features】 ■TT Chuck Block - The product itself does not have magnetism, so it is placed on a magnetic chuck to induce magnetism and attract the workpiece. ■CMV Magnet V Block - Designed with magnetic ON/OFF functionality on both sides. *For more details, please download the PDF or feel free to contact us.

• magnet

The "Magnet Cleaner" is a product that allows for the suction collection of small parts that have entered narrow areas where hands cannot reach. Additionally, we offer a "Nozzle Holder" used to hold nozzles at the tip of the cutting oil supply hose for machine tools. Furthermore, we have a "Magnet Tool Hanger" that can gather tools that were previously scattered in one place, featuring a 3-way design for hanging, attaching, or placing. We also handle various magnet application machine tools, including the "Magnet Hand Tapper" and "Air Tool Holder." 【Features】 ■ Enables the suction collection of small parts that have entered narrow areas where hands cannot reach. *For more details, please download the PDF or feel free to contact us.

• Other work tools

The "Magnet Light" is a lighting stand that can be fixed using magnetic force in machine factories and warehouse work sites. Thanks to its strong adhesive power, it can be attached to horizontal, inclined, and vertical surfaces. We also offer "LED electric stands" in daylight white and incandescent colors. Please feel free to contact us when you need assistance. 【Features】 ■ Strong adhesive power allows attachment to horizontal, inclined, and vertical surfaces ■ The flexible tube allows for easy adjustment of the lighting angle, making it suitable for localized lighting during close-up work *For more details, please download the PDF or feel free to contact us.

• LED lighting

The "Rechargeable Portable LED Light" is a product that can be fixed with a magnet. Additionally, we offer a "Solar Sensor Light" that can automatically turn on and off once installed in a sunny location. Furthermore, we also have a medium-sized "Waterproof Rechargeable LED Handheld Light" that excels in size balance. 【Features】 ■ Can be fixed with a magnet ■ Fluorescent tube-type LED light provides 350lm of brightness to illuminate a wide area ■ Spot LED light can be held in hand to illuminate specific areas ■ Rechargeable, allowing for repeated use and cost-effectiveness *For more details, please download the PDF or feel free to contact us.

• LED lighting

The "LED Light Holder with Magnet" provides focused lighting for pinpoint illumination, making it suitable for hand lighting in precision machining environments and for display lighting. Additionally, the strong magnetic part has a maximum holding force of over 1kgf, and we offer the "LED Search Magnet," which has a flexible tip that can bend. Furthermore, we also have a "Rechargeable LED Light (Floodlight Type)" with a metal guard that is designed to withstand harsh usage environments. 【Features】 ■ Provides focused lighting for pinpoint illumination, suitable for hand lighting in precision machining environments and for display lighting. ■ Equipped with a magnet, allowing it to be fixed to steel shelves or metal beams, which helps prevent loss. ■ Battery-operated, making it usable in places without power outlets, in cars, or outdoors without worrying about power supply. *For more details, please download the PDF or feel free to contact us.

• LED lighting

The "Scribing Scale" allows for easy scribing work during additional processing on-site or during prototype modifications. Additionally, we offer a "Magnetic Lens" that can rotate 360°, making angle adjustments easy. Furthermore, we have a "Magnetic Catcher" that allows you to easily attract and retrieve tools using magnetic force without having to descend from the work area, even if you drop tools while working at heights. 【Features】 ■ Easy scribing work during additional processing on-site or during prototype modifications. *For more details, please download the PDF or feel free to contact us.

• Other work tools

We would like to introduce the dual-wheel caster "TSY Series" that we handle. The urethane part of the wheel has a high hardness (high load-bearing urethane), which means that the tire does not sink under load, resulting in reduced starting resistance. This allows for easy movement of heavy objects without putting strain on the body. Since high-capacity bearings are used in the vertical axis part, it exhibits excellent maneuverability even under high loads. 【Specifications (excerpt)】 ■TSY 150 ・Body: Aluminum alloy die-cast ・Wheel: Urethane ・Wheel diameter: 150 mm ・Allowable load N (kg): 7840 (800) *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce our non-magnetic casters, the 'MB and TMB Series'. The metal parts of the 'MB Series' casters are made entirely of non-magnetic materials such as brass. There is no magnetic response even at 3 Tesla, allowing for safe and comfortable movement. Since they are dual-wheel casters, they can be used just like regular casters. 【Features】 ■ MB Series - Elastomer wheels - Due to their elasticity, they are suitable for preventing damage and dirt on the floor, and they operate quietly. ■ TMB Series - Nylon wheels - Excellent wear resistance, lightweight, and available in various colors. *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce the "FZ Series" of silent casters that we handle. With high-performance bearings, these casters offer smooth turning functionality, excellent starting performance, running performance, and quietness. Additionally, the wheels are made of elastomer, making them durable and less likely to damage floors. We have newly added Φ50 and Φ60 to this popular series, allowing you to choose the appropriate size for your products from a wide range of size variations. 【Specifications (excerpt)】 ■FZ 50/50S ・Body: Nylon ・Wheels: Elastomer ・Wheel diameter: 50mm ・Allowable load N (kg): 588 (60) *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce the suspension caster "CT Series" that we handle. Two types of springs are available. Please choose the one that is closer to your usage conditions. It is suitable for use in clean rooms for precision equipment, parts, semiconductor devices, etc., which are sensitive to vibrations and shocks. 【Specifications (excerpt)】 ■CT 100/100S ・Body: Nylon ・Wheel: Elastomer ・Wheel diameter: 100 mm ・Load capacity N (kg): 196 (20)・392 (40) *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce our dust cover caster, the "CF Series." Thanks to the dust cover's effectiveness, this product features a function that makes it difficult for debris, paper scraps, and hair to get tangled in the wheel's rotating parts, eliminating the need for long-term maintenance. Additionally, since the functionality is contained within, it has a stylish design that does not compromise the product's aesthetics during use. 【Specifications (Excerpt)】 ■ CF/CFW 050/050F - Body: Nylon - Wheel: Elastomer - Wheel diameter: 50 mm - Allowable load N (kg): 588 (60) *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce our antibacterial caster series, the "KF Series." We offer the "KF 075/075S" with a wheel diameter of 75mm and a permissible load of 784N (80kg), as well as the "KF 100/100S" with a wheel diameter of 100mm. Please feel free to contact us when you need assistance. 【Lineup (Excerpt)】 ■KF 075: Plate type, without stopper ■KF 075S: Plate type, with stopper ■KF 075N: Screw type, without stopper ■KF 075NS: Screw type, with stopper ■KFW 075: Plate type, without stopper ■KFW 075S: Plate type, with stopper *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce our dual-wheel caster "TF Series." The wheel diameter is 40mm, with a permissible load of 392N (40kg) for the "TF 40/40F/40S/40SF," and a permissible load of 784N (80kg) for the "TF 60/60F/60S/60SF." Please feel free to contact us when placing an order. 【Lineup (Excerpt)】 ■TF 40/40F: Plate type without stopper ■TF 40S/40SF: Plate type with stopper ■TF 40N: Screw type without stopper ■TF 40NS: Screw type with stopper ■TFW 40/40F: Plate type without stopper ■TFW 40S/40SF: Plate type with stopper *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce the dual-wheel caster "F Series" that we handle. The main body is made of nylon, and the wheels are made of elastomer, with a wheel diameter of 50mm available in "F 050/050F/050S/050SF." Additionally, we also offer the "F/FW 075WS" with a wheel diameter of 75mm and a permissible load of 784N (80kg). 【Product Lineup (Excerpt)】 ■F 050/050F: Plate type without stopper ■F 050S/050SF: Plate type with stopper ■F 050N: Screw type without stopper ■F 050NS: Screw type with stopper ■FW 050/050F: Plate type without stopper ■FW 050S/050SF: Plate type with stopper *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce the dual-wheel caster "TE Series" that we handle. We offer the caster "TEA 75N16rws," which has a built-in stopper function that allows for easy pulling with wires, enabling quick switching between free and stop modes at your fingertips. Since the main body is made of resin (nylon), noise during operation is significantly reduced. Please feel free to contact us if you need any assistance. 【Product Lineup (Excerpt)】 ■ TE 40J/40JF: Plate type, without stopper ■ TE 40JS/40JSF: Plate type, with stopper ■ TE 40JN: Screw type, without stopper ■ TE 40JNS: Screw type, with stopper ■ TE 40JCR/40JCRF: Plate type, without stopper ■ TE 40JSCR/40JSCRF: Plate type, with stopper *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce the dual-wheel caster "TY Series" that we handle. The wheel diameter is 40mm, with a permissible load of N(kg) 392(40) for the "TY 40/40F/40S/40SF" and a permissible load of N(kg) 588(60) for the "TY 50/50F/50S/50SF". Please feel free to contact us when you need assistance. 【Lineup (excerpt)】 ■TY 40/40F: Plate type without stopper ■TY 40S/40SF: Plate type with stopper ■TY 40N: Screw type without stopper ■TY 40NS: Screw type with stopper ■TY 40B/40BF: Plate type without stopper ■TY 40SB/40SBF: Plate type with stopper *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce our double-wheel caster "AE/A Series." The main body is made of aluminum alloy die-cast, and the wheels are made of elastomer, with a permissible load of N(kg) 784(80) for the "AE 50/50F/50S/50SF." Additionally, we also offer the "A 75N/75NS," which has nylon wheels with a wheel diameter of 75mm. 【Lineup (Excerpt)】 ■ AE 50/50F: Plate type without stopper ■ AE 50S/50SF: Plate type with stopper ■ AE 50NF: Screw type without stopper ■ AE 50NS: Screw type with stopper ■ A 50/50F: Plate type without stopper ■ A 50S/50SF: Plate type with stopper *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce our double wheel caster "G Series." The main body is made of aluminum alloy die-cast, and the wheels are made of nylon, with a wheel diameter of 60 mm. The allowable load is 1470 N (150 kg). Please feel free to contact us when you need assistance. 【Lineup (excerpt)】 ■ G7: Plate type without stopper ■ G7S: Plate type with stopper ■ G7N: Screw type without stopper ■ G7NS: Screw type with stopper *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce the dual-wheel caster "MY Series" that we handle. The main body is made of zinc alloy die-cast, and the wheels are made of elastomer, featuring a wheel diameter of 40mm with the lineup including "MY 4E/4EF/4ES/ESF." Additionally, we also offer screw-type "MY 4EN/4ENS" and plate-type "MY 6E/6ES." 【Lineup (Excerpt)】 ■MY 4E/4EF: Plate type without stopper ■MY 4ES/ESF: Plate type with stopper ■MY 4EN: Plate type without stopper ■MY 4ENS: Plate type with stopper ■MY 6E/6EF: Plate type without stopper ■MY 6ES/6ESF: Plate type with stopper *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce the dual-wheel caster 'N Series' from Tokai Caster, which we handle. You can choose between models with or without a stopper, and we offer plate type, screw type, fixed type, and screw-fixed type. The main body is made of nylon, and the wheels are made of elastomer, with a wheel diameter of 100 mm. The allowable load is 980 (100) N (kg). 【Lineup】 ■ N100/100S ■ N100N/100NS ■ N100K/100KS ■ N100KN/100KNS *For more details, please download the PDF or feel free to contact us.

• caster

We would like to introduce the dual-wheel caster 'NA Series' from Tokai Caster, which we handle. The body is made of nylon, and the wheels are made of elastomer. The wheel diameter is 100 mm, and the allowable load is 980 (100) N (kg). We offer both versions with and without a stopper, as well as plate type, screw type, fixed type, and screw-fixed type. 【Lineup】 ■NA100/100S ■NA100N/100NS ■NA100K/100KS ■NA100KN/100KNS *For more details, please download the PDF or feel free to contact us.

• caster