藤川伝導機 Product Lineup

The "All-Air Mold Exchange System" allows for easy replacement of damaged piping and maintenance of valves with commercially available products. It does not dirty the factory with oil stains. Compared to hydraulic systems, the clamping operation is faster, significantly reducing mold exchange time. Additionally, with the high-power air die clamp, molds can be locked from outside the machine with the push of a button, ensuring safety. 【Features】 ■ Safe mold transfer ■ Easy mold movement ■ Locking molds from outside the machine ■ Reduced running costs ■ Energy-saving and time-saving without hydraulics *For more details, please download the PDF or feel free to contact us.

• Other molds

We handle "hydraulic accessories" such as pressure switches and pressure gauges. Our lineup includes the pressure switch "Model JBA," which has a vibration resistance of 30G and a lifespan of over 1 million cycles, and the pressure gauge "Model JGA/JGB," which is installed in the middle of a hydraulic circuit to display the pressure within the circuit. We also offer "G-thread fittings." 【Lineup】 ■Model JBA: Pressure Switch ■Model JGA/JGB: Pressure Gauge ■Model JX: Branch ■Model PS: Cap Switch *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

The "Model JMC/JMD" is a multi-coupler that can be installed in a space-saving manner around molds and equipment. The coupler and grip parts are made of stainless steel, while the plate part is made of aluminum, enhancing rust prevention. It improves durability against air and temperature-controlled water. There is no worry about incorrect connections thanks to the misconnection prevention pin. During connection, simply insert it lightly, and for disconnection, just pull lightly. 【Features】 ■ Compact and lightweight ■ Simple connection ■ Misconnection prevention function ■ Use of rust-resistant materials *For more details, please download the PDF or feel free to contact us.

• Coupler

The "JRA/JRB/JRC/JRD" is a rotary joint that reduces the load on surrounding equipment with low torque and smooth rotation. Thanks to its high-durability seals and high-rigidity body, it meets specifications even after long-term use. Its compact design requires minimal installation space. Additionally, it employs specially developed low-friction seals to achieve smooth rotation with low torque. 【Features】 ■ Long lifespan ■ Compact ■ Low torque ■ Compatible with hydraulic, air, and large-capacity coolant *For more details, please download the PDF or feel free to contact us.

• joint

The "Model JSY007" is a compact accumulator that is easier to install on NC tables by being smaller than our conventional products. It alleviates pressure fluctuations and prevents equipment damage or workpiece deformation due to abnormal high pressure, as well as prevents deterioration in processing quality or workpiece drop due to pressure drops. It is suitable for equipment with small circuit capacity. (If the circuit capacity is large, please consider using model JSS or multiple units of JSY007.) 【Features】 ■ Alleviates pressure fluctuations within the jig, isolated from the hydraulic source ■ Maintenance-free spring-type accumulator ■ An even more compact small accumulator compared to our conventional products *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

In this document, we introduce the Jmec part numbers and the corresponding Sugatsune industrial transition part numbers. We have listed Jmec part numbers such as "JA8X50," "JA10X50," "JA8X60SUS," and "JA10X50SUS," along with the manufacturer part numbers for Sugatsune. Please feel free to contact us if you have any inquiries. 【Featured Products (Partial)】 ■JA8X50 ■JA10X50 ■JA8X60SUS ■JA10X50SUS ■JDW40-8-60 *For more details, please download the PDF or feel free to contact us.

• others

The "eLINK" is a charging and discharging device that enables bidirectional power exchange. It can not only charge electric vehicles (EVs) but also supply the power stored in the EV's battery to buildings such as offices and apartments. Additionally, excess power generated from solar energy can be stored in the EV, and when the solar power is not being generated, the EV can supply power, making efficient use of renewable energy. 【Features】 ■ Control linked with "EMS" ■ Equipped with "autonomous output operation" function ■ Capable of supporting "billing function" ■ Pursuit of "design quality" ■ Eligible for "subsidy" models *For more details, please download the PDF or feel free to contact us.

• Charger
• Cells and batteries

We would like to introduce the "Motor Reversal Specifications for Small Ball Screw Actuators" that we handle. This product resolves the issue of breakage at the end of the ball screw shaft caused by excessive tension on the timing belt. We offer two types: the SE15 series and the SE23 series. Please feel free to contact us when you need assistance. 【Lineup】 ■ SE15 Series ■ SE23 Series *For more details, please download the PDF or feel free to contact us.

• belt

This document introduces the procedures and basics of vibration countermeasures. It includes visualizations such as "visualizing disturbance vibrations numerically and clarifying acceptable vibration standards," "visualizing the effectiveness of countermeasure products for reliable product selection," and "visualizing the effects of countermeasures." Additionally, it provides information on services that support visualization and offers simple explanations of complex vibration elements. 【Contents (partial)】 ■ Visualization 01 / Visualizing disturbance vibrations numerically and clarifying acceptable vibration standards ■ Visualization 02 / Visualizing the effectiveness of countermeasure products for reliable product selection ■ Visualization 03 / Visualizing the effects of countermeasures ■ Self-vibration measurement service / Rental of vibration measurement equipment and provision of analysis reports ■ Engineer dispatch measurement / On-site measurement and analysis report support through engineer dispatch *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce our "Easy Detachable Clamp Series." It features excellent durability and corrosion resistance, having passed 50,000 operational tests, and the main body is made of stainless steel. It also uses laser marking that does not alter its properties. Additionally, it has an ergonomic design, with a protruding shape on one side that clearly indicates the LOCK status. The safety design also prevents mistakes. 【Features】 ■ Excellent durability and corrosion resistance ■ Ergonomic design ■ Safety design to prevent mistakes *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

The "PX Belt RC Specification" is a timing belt that reduces the scattering of rubber powder by changing the processing method of the tooth fabric. By changing the tooth fabric from black to beige, it has become easier to see, making it simpler to assess the lifespan of tooth wear. Additionally, based on a rational arc tooth shape of the PX belt, which is grounded in precise meshing theory, the constituent materials have been improved, and long belts can be specified in three different lengths. 【Features】 ■ Visualization of lifespan assessment ■ Extended lifespan ■ Reduced mounting shaft load ■ Clean ■ Reduced operational elongation ■ Increased flexibility *For more details, please download the PDF or feel free to contact us.

• belt

The "Easy Detachable Clamp Series Positioning and Fastening Unit" that we handle allows for tool-free attachment and detachment, enabling "anyone to do it quickly and easily." It eliminates the need for screw tightening work, significantly reducing detachment time, and prevents forgetting to tighten bolts, over-tightening, and variations in precision, contributing to standardization of work and preventive maintenance. We offer a "Knob Operation Type" that positions with pin insertion and clamps by rotating the knob 90°, as well as a "Push-Pull Operation Type" that positions and fastens through insertion. 【Features】 <Knob Operation Type> ■ Rounded reverse taper shape ■ Tapered shape for easy insertion ■ One-sided protrusion shape that clearly indicates LOCK (clamp) status ■ Base shape with symmetrically arranged mounting holes ■ The main body is made of stainless steel *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

The "LLP" is a linear cylinder equipped with a cushioning function that controls speed near the operating ends, allowing for both reduced cycle time and extended equipment lifespan. With the newly developed cushioning mechanism, speed is reduced just before the upper and lower ends, alleviating shocks during transport and fixation. Additionally, a specially designed dust seal achieves high sealing performance even with high-pressure coolants, using sealing materials that excel in chemical resistance, ensuring high durability even with chlorine-based coolants. 【Features】 ■ Stroke specified in 5mm increments ■ Excellent coolant countermeasures ■ Speed control valve that can be directly mounted ■ Three types of tip shapes to choose from ■ Ports consolidated to the flange *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce the "Hydraulic Linear Cylinder/Compact Cylinder" that we handle. The "Hydraulic Linear Cylinder" allows for stroke specifications in 1mm increments (from 1mm to 200mm) and is a double-acting linear cylinder that pursues extreme compactness through custom manufacturing. Additionally, the "Compact Cylinder" is compatible with both low and high pressures. 【Product Lineup (Partial)】 <Hydraulic Linear Cylinder> ■LL ■LLR ■LLU *For more details, please download the PDF or feel free to contact us.

• cylinder

We would like to introduce our high-power link clamp, the "LKE," which we handle. The clamping force is 4.3 kN, and the holding force is 5.5 kN, providing up to 2.4 times the clamping force compared to the same size "LKA." Additionally, by utilizing the large holding force, it enables high-load machining and high-precision machining, demonstrating high output even with low oil volume and low pressure. 【Features】 ■ Powerful clamping force due to the force multiplication mechanism ■ High-load machining and high-precision machining can be achieved by utilizing the large holding force ■ High output even with low oil volume and low pressure *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

We would like to introduce the "Hydraulic Link Clamp" that we handle. With its compact design, it has become possible to pass internal piping through the clamp's underside and eliminate interference, making jig design easier. Additionally, by integrating the link pivot section with the main body, it has become even more compact, and the lever direction can be selected from three options. 【Features】 ■ Compact ■ High-strength pivot section ■ Lever direction can be selected from three options ■ Excellent coolant measures ■ Large eccentricity *For more details, please download the PDF or feel free to contact us.

• Vice Clamps
• Hydraulic Equipment

The "LHE" is a hybrid clamp with a power amplification mechanism and hydraulic system. It utilizes a large holding force to achieve high-load processing and high-precision processing, demonstrating high output even with a small amount of oil and low pressure. Additionally, we offer various "control valves" that can be directly attached to the clamp. 【Features】 ■ Powerful clamping force due to the power amplification mechanism ■ Achieves high-load processing and high-precision processing by utilizing a large holding force ■ Energy-saving *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

The "LHA-Y0" is a compact swing clamp that incorporates a stop and guide mechanism, eliminating the need for external guide mechanisms. It features high rigidity, long lifespan, and high precision, accommodating a long lever with an extended guide ratio, allowing for clamping in offset positions. Additionally, it utilizes the same three-guide groove ball guide as the swing clamp that withstands high-speed swinging operations, achieving high durability and precise stopping (with a repeat accuracy of ±0.5°). 【Features】 ■ No need for a guide mechanism ■ Side pushing of workpieces ■ Compatible with long levers ■ High reliability and durability with the same guide mechanism as the best-selling swing clamp, ensuring high precision in stopping ■ Excellent coolant measures *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

We would like to introduce the "Hydraulic Swing Clamp" that we handle. It strongly supports the piston rod with a long guide ratio (between the top of the body and the end of the rod), making it compatible with long swing levers. Additionally, the ball guide section rotates the outer race in accordance with the pivoting of the piston rod and the rolling of the steel balls, minimizing resistance during pivoting to the utmost limit. 【Features】 ■ Compatible with long levers ■ High-speed operation and durable pivoting mechanism ■ Excellent coolant measures ■ Easy manufacturing of swing levers (taper sleeve included as standard) ■ Speed control valve that can be directly mounted *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment
• Vice Clamps

The "LGV" is a single-action swing clamp that can detect lock and release operations with one port. There are three selectable types, and the external dimensions and mounting hole processing dimensions for the three types of operation confirmation are the same, making jig design simple. Additionally, we also offer the "LJV," a single-action link clamp with a 7MPa operation confirmation function. 【Features】 ■ Direct mountable speed control valve ■ Same dimensions regardless of operation confirmation type ■ Reduced number of sensors ■ Reduced number of ports and easy processing *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

The "LFW/LFA" is a frog clamp that can avoid interference during the loading and unloading of workpieces by retracting the lever. By retracting the lever significantly, it allows for the sliding of workpieces during inter-process transport and clamping. Additionally, the operation confirmation function enables reliable, safe, and secure automation. Please feel free to contact us when you need assistance. 【Features】 ■ The lever retracts to a position lower than the clamping part ■ Avoids interference with workpieces that are slid in and out ■ Avoids interference with the clamping on the robot hand side ■ Precisely clamps in positions that are difficult to clamp ■ Suitable for automation with the operation confirmation function *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

The "LDD" is a hydraulic double-acting work support that can provide strong support against loads from above. It is not affected by back pressure and can perform a forced release operation hydraulically, achieving a compact product similar to a typical single-acting work support. Additionally, it allows for indirect operation confirmation via a hydraulic pressure switch, making it easier to coordinate with work transport robots, enabling more reliable automation. 【Features】 ■ Reliable release operation ■ Compact body ■ Long stroke type also available in the lineup *For more details, please download the PDF or feel free to contact us.

• Hydraulic Equipment

The "JDF/JDFS" is a flat plate holder type magnet with a female thread. Additionally, we offer the "JRM/JRF," a magnet with a holder covered by a rubber jacket, and the "JRB/JRN," which increases friction resistance with the adhered object due to the rubber jacket, preventing positional displacement in the sliding direction. Furthermore, we also have the "JSSF-ND," a cylindrical holder type magnet with a female thread. 【Features】 ■ Flat plate holder type magnet with a female thread ■ Increased adhesion strength by covering the magnet with a metal holder ■ Standardization of three types of magnets *For more details, please download the PDF or feel free to contact us.

• magnet

The "JPM-ND" is a magnet for aluminum frames. By lightly tightening the grab screw, the tip is pressed against the aluminum frame, preventing the magnet from moving vertically. Using nuts designed for aluminum frames can further prevent the movement of the magnet. 【Features】 ■ Allows doors, covers, tools, and accessories to be attached to aluminum frames with magnets. ■ Can be mounted at any position due to the plastic spring plate on the side. ■ The main body can be removed from the aluminum frame by loosening the grab screw and sliding it. *For more details, please download the PDF or feel free to contact us.

• magnet

The "RBE" is a bracket designed for using actuators in a vertical position. There are two standardized types: one that attaches from the front using the through hole inside the actuator, and another that attaches from the back using the screw holes of the actuator. Additionally, it guarantees a flatness of 0.05mm or less and a perpendicularity of 0.05/100mm or less. 【Features】 ■ High rigidity with a three-rib structure, allowing the actuator to perform at its best ■ Made of cast iron with a monolithic structure, making it robust ■ Multiple screw holes or counterbore holes for fixing, allowing for the installation of actuators at different heights or with varying strokes *For more details, please download the PDF or feel free to contact us.

• bracket

The "PLX" is an index plunger that can be used for indexing and positioning. If the screw of the main body is long in relation to the mounting part, please use the index plunger collar "PXCS" to adjust the screw-in length. Additionally, there are options available such as the nickel-plated "PLXS" and the all-stainless steel "PLXS-S-A4" made of SUS316. 【Features】 ■ Two standard stroke lengths for each pin diameter (excluding pin diameters: φ10, φ12, φ16) ■ Usable for indexing and positioning ■ Pins are hardened and have excellent wear resistance ■ PLX-A-RD and PLX-AK-RD have red knobs, enhancing visibility and can be used to clarify operational areas and work procedures *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PLY" is an index plunger that can be locked in a retracted state by pulling the knob and rotating it 90°. To release the lock, simply pull the knob slightly and rotate it 90°. It will return to its original position with the help of an internal spring. The locking mechanism is built into the knob, and its overall length is the same as the "PLX," which does not have a locking mechanism. Additionally, there are options such as the wear-resistant "PLYS" and the "PLYS-A4," which allows for the selection of the presence or absence of a lock nut. 【Features】 ■ Standardization of two types of strokes for each pin diameter (excluding pin diameters: φ10, φ12, φ16) ■ Pins are hardened and have excellent wear resistance ■ PLY-A-RD and PLY-AK-RD have red knobs, enhancing visibility and can be used to clarify operation points and work procedures ■ The product code allows for the selection of the presence or absence of a lock nut and the color of the knob *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PWKS" is an index plunger with a key lock. By sliding the cover of the keyhole with a dedicated key and inserting the key, the pin can be locked by rotating it 180°. There are two types available: one that can only be locked when the pin is extended, and another that can also be locked when the pin is retracted. The key lock type and the presence of a lock nut can be selected based on the product code. 【Features】 ■ Index plunger with a key lock ■ Slide the cover of the keyhole with a dedicated key, insert the key, and rotate it 180° to lock the pin ■ Locking prevents unintended operations *For more details, please download the PDF or feel free to contact us.

• Other machine elements

"POPS" is a pneumatic type index plunger that can be used in locations where automation of equipment or manual operation is difficult. There are two types: a double-acting type that performs both pin retraction and extension pneumatically, and a single-acting type that performs either pin retraction or extension pneumatically. These can be selected based on the product code. Under normal conditions, "POPS-AK" has the pin retracted, while "POPS-EK" has the pin extended. 【Features】 ■ By attaching a sensor, the state of the pin can be monitored electrically. ■ Can be used for enhanced safety, labor-saving, and automation. ■ A magnet-type dual sensor can detect both the retraction and extension states of the pin. ■ When the sensor detects the set position of the pin, an LED lights up, allowing confirmation of the pin's retraction and extension states with two LEDs. *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PLXS-SN" is an index plunger with a sensor. It features a knob with an integrated magnet for sensor detection, which is part of a pin structure. The sensor state switches and outputs a signal when the stroke exceeds approximately 2/3 from the retracted position of the pin. Additionally, there is a "PLYS-SN" that allows you to lock the pin in the retracted position by pulling the knob and rotating it 90°. 【Features】 ■ Enables electrical monitoring of the pin's state ■ The sensor's LED lights up when the pin is extended ■ Can be used for enhanced safety, labor-saving, and automation ■ The pin is nickel-plated and has excellent wear resistance ■ Comes with a lock nut, sensor, sensor clip, and hex wrench in addition to the index plunger body *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PXPS-A4" is a push-button type index plunger. When the button is pressed, the pin is retracted into the body by the force of the built-in spring. Pressing the button again allows the pin to lock in an extended position. The pin is heat-treated for excellent wear resistance. Additionally, there is an all-stainless steel version made of SUS316, called "PXPS-S-A4." 【Features】 ■ Pressing the button retracts the pin into the body using the force of the built-in spring. ■ Pressing the button again allows the pin to lock in an extended position. ■ Metal parts are made of SUS316, which has superior corrosion and chemical resistance compared to SUS304. ■ The pin is heat-treated for excellent wear resistance. ■ The presence or absence of a lock nut can be selected based on the product code. *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PLX-G/PLXS-G" is a knobless type of index plunger. The pins are either hardened (made of steel) or nickel-plated (made of stainless steel). They have excellent wear resistance. Additionally, if the screw of the main body is long in relation to the mounting part, please use the index plunger collar "PXCS" to adjust the screw-in length. 【Features】 ■ Two standard stroke lengths for each pin diameter ■ Usable for indexing and positioning ■ Pins are either hardened (made of steel) or nickel-plated (made of stainless steel), offering excellent wear resistance ■ The material of the main body and the presence of a lock nut can be selected based on the product code *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PHDXS-VH" is a hygienic design index plunger for thin plates. Both sides of the mounting plate and all sliding parts are sealed, preventing foreign substances and liquids from entering the gaps inside the index plunger and at the mounting surface. Additionally, there are options such as the "PHDYS-VH" with a locking mechanism and the "PHDXS-FH," which excels in corrosion resistance and chemical resistance. 【Features】 ■ Complies with guidelines set by EHEDG (European Hygienic Engineering & Design Group) ■ Uses SUS316 for metal parts, which has superior corrosion and chemical resistance compared to SUS304 ■ Surface finish is less than Ra0.8μm, providing excellent cleanability ■ Usable temperature: -20℃ to 110℃ *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PFAX" is an index plunger with a flange that allows for pin removal and attachment. Additionally, we offer the "PFAY," which features a locking mechanism and is a pin removal type, as well as the "PFLX," which has a nickel-plated pin that excels in wear resistance. Furthermore, we also have the "PFLY," which can be locked in a retracted pin state by pulling the knob and rotating it 90°. 【Features】 ■ Index plunger with removable pin ■ Easy to perform additional processing on the pin tip by removing the pin ■ The pin is secured with the included hex socket cap screw ■ Hex socket bolts are used for mounting to equipment and devices *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PPLX" is a high-precision flange-mounted index plunger. When used in combination with positioning pin bushings PJA/PJB, it allows for more precise positioning. Additionally, there is also a high-precision flange-mounted index plunger "PPLY" with a locking mechanism. 【Features】 ■ Index plunger that enables accurate positioning ■ Two standard pin lengths for each pin diameter ■ Pin diameter tolerance is h6, and the recommended tolerance for the corresponding hole is F7 ■ When used in combination with positioning pin bushings PJA/PJB, it allows for more precise positioning *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PGX" is a slim-structured index plunger designed for tight spaces. Normally, the pin protrudes from the main body, and when the lever is pulled, the pin retracts into the body. When the lever is released, the pin extends from the body due to the force of the built-in spring. We also offer other index plungers with different materials and finishes, such as "PGXS," "PGY," and "PGYS." 【Materials and Finishes】 ■ Lever: Steel, trivalent chromate treatment ■ Body: Steel, trivalent chromate treatment ■ Pin: Steel, trivalent chromate treatment ■ Spring: SUS301 ■ Lock nut: S45C, trivalent chromate treatment *PGX-AK *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PXBS" is an index plunger that operates the entry and exit of pins by pressing a button. Since the operation is restricted by the button, it prevents accidental operations. The locking mechanism is built into the knob section, so there is no impact on the locking mechanism from dirt or foreign objects. Normally, the pin is locked in the extended position, and when the button is pressed while pulling the knob, the pin retracts. When the knob is released, the pin returns to its original position and locks due to the force of the built-in spring. 【Material and Finish】 ■ Knob: Nylon 6 (matte black) ■ Button: Polyacetal (red) ■ Body: SUS303 ■ Pin: SUS303 nickel-plated ■ Lock nut: SUS304 *PXBS-AK *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "MOC" is an Oldham-type flexible coupling. The spacer is made from environmentally friendly recycled carbon fiber reinforced resin. The hub and spacer allow for significant eccentricity and angular misalignment due to slippage. It complies with the group standard (TES 1403) of the Japan Machine Tool Builders' Association. Additionally, we also offer the Oldham-type and clamping-type flexible coupling "MOC-C," among others. 【Material and Finish】 ■ Hub: A2017 anodized ■ Spacer: Recycled carbon fiber reinforced polyacetal ■ Hex socket set screw: SCM435 with black trivalent chromium plating ■ Hex socket bolt: SCM435 with black trivalent chromium plating *For more details, please download the PDF or feel free to contact us.

• Coupling

The "LWAF" is a cam lever (with a male thread) that quickly tightens and releases through the up and down motion of the lever. It features a structure that completely secures the lever part and the pin, enhancing durability. Even with repeated use, there is no occurrence of play due to wear on the contact surfaces of the lever part and the pin. Additionally, we offer all-stainless steel cam levers (with male threads) such as "LWAFS-ANI" and stainless steel cam levers (with male threads) like "LWAFS-NI." [Colors of the lever part] ■ Matte black ■ Orange ■ Silver gray ■ Red *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "LWBF" is a cam lever (with a male thread) that quickly tightens and releases through the up and down motion of the lever. It features a structure that completely secures the lever and pin, enhancing durability. Even with repeated use, there is no occurrence of play due to wear on the contact surfaces of the lever and pin. Additionally, we also offer all-stainless steel cam levers (with a male thread) "LWBFS-ANI" and stainless steel cam levers (with a male thread) "LWBFS-NI." 【Colors of the lever】 ■ Matte black ■ Orange ■ Silver gray ■ Red *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "FGBD-E-NBR" is a rubber bumper that incorporates screws for installation. It is easy to install on devices and machinery. It features a male thread type on one side, and the threaded part is made of steel. The rubber used is NBR. It is suitable for shock absorption and vibration damping applications. Additionally, we also offer silicone rubber bumpers "FGBDS-E-SI" and rubber bumpers with a tapered shape (both sides with male threads) "FGBE-EE." 【Materials and Finish】 ■ Main body: NBR rubber Shore A hardness 55±5 ■ Threaded part: Steel with trivalent chromate treatment ■ Cover sheet: Steel with trivalent chromate treatment *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We offer the point plate 'FPP' for use in combination with scale plates and scale stickers. It comes with adhesive tape. Please attach it directly to the machine or equipment for use. There are two color variations available, which can be selected based on the suffix of the part number. Additionally, we also handle point stickers 'FPS' and scale plates (horizontal) 'FSP', as well as scale plates (vertical) 'FSP-V'. 【Material and Finish】 ■Main body: SUS304 ■Weight ・FPP/0.8g ・FPP-BK/0.8g *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "KGLF" is a plastic three-lobe knob with a large diameter for the knob screw type. It has a shape that is easy to apply force to, and the screw part is made of brass, allowing for the selection of a cap or no cap based on the product code. The version without a cap has a through hole. Additionally, we also offer plastic mini knobs "KIM/KIMS/KIF/KIFS" and dimple knobs "KRM/KRMS/KRF/KRFS/KRR." 【Cap Colors】 ■ Matte Black ■ Matte Blue ■ Matte Orange ■ Matte Red ■ Matte Silver ■ Matte Yellow *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "KCWFS-A4" is an all-stainless steel wing knob equivalent to SUS316, known for its excellent corrosion resistance. It allows for easy clamping and securing of parts without the use of tools. The design is ergonomic, making it easy to apply force. Additionally, we offer other products such as the cross knob (female thread) "KJFS-K-A4-HP," the cross knob (male thread) "KJMS-A4-HP," and the stainless steel hand knob "KMDFS." 【Product Lineup (Partial)】 ■KCWFS-32-M5-A4 ■KCWFS-32-M6-A4 ■KCWFS-40-M6-A4 ■KCWFS-40-M8-A4 ■KCWFS-50-M8-A4 *For more details, please download the PDF or feel free to contact us.

• Other machine elements

"KIGMS" is a plastic mini knob with a thrust pad attached to the screw tip. The screw part is made of stainless steel, which has excellent corrosion resistance. The thrust pad can tilt up to 15° relative to the screw part. It is effective when the surface of the workpiece is uneven or tilted. Additionally, we also offer the seven-lobe knob "KSGMS" with a thrust pad. 【Material and Finish】 ■ Knob: Nylon 6 (black) ■ Screw part: SUS303 ■ Thrust pad: Polyacetal (matte black) or SUS303 ■ O-ring: Fluoro rubber *For more details, please download the PDF or feel free to contact us.

• Other machine elements