藤川伝導機 List of Products and Services

This catalog introduces large rolling bearings handled by Fujikawa Denko Co., Ltd. The explanations include common technical descriptions of bearings, presented in accordance with the general flow of bearing selection. Additionally, the dimension tables list specific technical descriptions and bearings for each bearing type, primarily introducing rolling bearings specifically designed for steel equipment for particular applications. Please make use of this information for appropriate bearing selection. [Contents (excerpt)] ■ Rated load and lifespan ■ Calculation of bearing load ■ Bearing accuracy ■ Fits ■ Internal clearance of bearings *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

This catalog introduces the removal tools for rolling bearings handled by Fujikawa Denko Co., Ltd. It includes types and features of adapters, hydraulic adapters, removal sleeves, and hydraulic removal sleeves. Additionally, it presents special hydraulic sleeves suitable for cases where movement of the shaft and adapter is required. [Contents] ■ Types and Features ■ Introduction of Special Hydraulic Sleeves ■ Dimension Table ■ Handling Instructions *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Other work tools

This catalog introduces miniature and small-diameter ball bearings handled by Fujikawa Denko Co., Ltd. It includes dimension tables for radial ball bearings, thrust ball bearings, and pivot ball bearings. Additionally, we provide technical explanations on bearing materials, precision, rated loads, and lifespan. Please make use of this information for selecting products. 【Contents (Excerpt)】 ■ Table of Contents - Characteristics of sealed and shielded bearings - Representation of basic numbers and auxiliary symbols - Dimension table contents - Dimension table for radial ball bearings in metric units *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

This catalog introduces the needle roller bearings handled by Fujikawa Denko Co., Ltd. It includes information on the types of needle roller bearings and comparisons with general bearings, as well as a list of bearing types and names in the section on the forms and features of needle roller bearings. Additionally, we present a variety of products, including HL roller bearings and bearings for rocker arms. Please make use of this information for selecting products. [Contents (excerpt)] ■ About needle roller bearings ■ Forms and features of needle roller bearings ■ Bearing selection ■ Rated load and lifespan ■ Fits for needle roller bearings *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

This catalog introduces rolling bearings handled by Fujikawa Denko Co., Ltd. In the section on the classification and characteristics of rolling bearings, it covers the basic structure composed of four components (outer ring, inner ring, rolling elements, and cage) and their classification. Additionally, it provides information on selection procedures, comparisons of types and performance, and arrangements of bearings for bearing selection. [Contents (excerpt)] ■ About rolling bearings ■ Classification and characteristics of rolling bearings ■ Bearing selection ■ Key dimensions and designation numbers ■ Bearing accuracy *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

This catalog introduces needle roller bearings handled by Fujikawa Denko Co., Ltd. The technical explanation includes the types and features of bearings, starting with needle rollers with retainers and needle rollers with retainers for large ends, as well as needle rollers with retainers for connecting rods. Additionally, we provide information on rated loads, lifespan, and calculations for bearing loads. Please make use of this for selecting products. [Contents (excerpt)] ■ Technical explanation ■ Needle rollers with retainers ■ Needle rollers with retainers for connecting rods ■ Shell-type needle roller bearings ■ Solid-type needle roller bearings *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

This catalog introduces rolling bearings handled by Fujikawa Dendoki Co., Ltd. In the section on the classification and characteristics of rolling bearings, we cover structures and classifications, as well as features of deep groove ball bearings and angular contact ball bearings. Additionally, we provide detailed information on bearing accuracy and fits. Please make use of this information for selecting products. [Contents (excerpt)] ■ Classification and characteristics of rolling bearings ■ Bearing selection ■ Rated load and lifespan ■ Bearing load calculations ■ Key dimensions and designation numbers *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

"Calm" is a metal sound-absorbing panel made from aluminum powder sintering, which is highly durable and does not contain resin components. It is resistant to degradation from heat and water, making it suitable for harsh environments. We offer noise control solutions backed by experience, starting from on-site surveys tailored to your needs. Additionally, you can choose from various delivery options: we can handle the installation work, deliver products for you to install, or supply materials for you to construct. If you are experiencing noise issues, please feel free to consult us. 【Features】 ■ Improvement of working environment ■ Reduction of boundary noise ■ Suitable for harsh environments ■ Extensive track record in soundproofing facilities *For more details, please refer to the PDF materials or feel free to contact us.

• Machinery and equipment installation/dismantling/relocation

This catalog introduces the bearing adapters, lock nuts, and washers handled by Fujikawa Denko Co., Ltd. It includes the part numbers and key dimensions for each product, such as adapters for rolling bearings and disassembly sleeves for rolling bearings. Additionally, we provide a weight table and an inch-to-millimeter conversion table. Please make use of this information for selecting products. 【Contents (excerpt)】 ■Adapters - Relationship between adapters and the bearings used - Key dimensions table for adapters - H (HE, HS, HA) 2 - Key dimensions table for adapters - H (HE, HS, HA) 3 - Key dimensions table for adapters - H (HE, HS, HA) 23 *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• nut

This catalog introduces the engineering plastic products handled by Fujikawa Denko Co., Ltd. It includes product information, material selection tables, physical property tables, chemical resistance data, as well as standard size tables and dimensional tolerance tables for each product. Additionally, a comparison table for compliance with the Food Sanitation Act is also provided. Please make use of this for product selection. 【Contents (partial)】 ■GEP ・MC Nylon ・Polyphenylene Acetal ・EltaLite PET-P *For more details, please refer to the PDF document or feel free to contact us.

• Engineering Plastics

"Paijon" is a lightweight and strong duralumin multi-purpose system upgrade part. With a slit tightening structure, it allows for repeated attachment and detachment, finishing the holes to φH8, and applying anodizing treatment to enhance rust resistance and durability. It can be applied to the assembly of frames for machinery, prototypes, experiments, and demonstration equipment. Please feel free to consult us when you need assistance. 【Features】 ■ Made of lightweight and strong duralumin (A2017) ■ Slit tightening structure ■ Allows for repeated attachment and detachment ■ Diverse product lineup ■ Available in five colors *For more details, please refer to the PDF document or feel free to contact us.

• joint

This catalog introduces a variety of universal joints handled by Fujikawa Denko Co., Ltd. It includes design and handling instructions, as well as selection procedures for our products, with dimension tables for each product, such as the high-precision compact "Precision Type S." Additionally, we introduce related products like the NXO slide and zero cup. For more details, please refer to the PDF download below. 【Contents (partial)】 ■Standard Types ・Precision Type S ・Precision Type D ・Precision Type H ・Power Type B *For more information, please refer to the PDF materials or feel free to contact us.

• joint

This catalog introduces the casters handled by Fujikawa Denko Co., Ltd. It includes product introductions such as steel and high-grade stainless steel, as well as many options like "search by installation dimensions" and "search by steam." Additionally, we also introduce special specifications such as cold-resistant and heat-resistant casters, as well as casters with conductive wheels and anti-static wheels. 【Contents (partial)】 ■Product Introduction - Steel - High-grade stainless steel - Quiet/Cushioned - Furniture *For more details, please refer to the PDF document or feel free to contact us.

• caster

This catalog is a comprehensive catalog of products manufactured by Hataya. In addition to our best-selling products such as the "Sun Tiger Cord Reel" and "Reel with Ground Fault Circuit Interrupter," we also introduce a variety of items including "Work Lighting Equipment," "Air Reels," and "Hose Reels." We have a wide range of product types listed, so please make use of this catalog when selecting products. 【Contents (partial)】 ■ Cord Reels ■ Lighting Equipment and Fixtures ■ Mounted Automatic Reels ■ Various Types of Reels ■ Various Reel-Related Products ■ Documentation *For more details, please refer to the PDF document or feel free to contact us.

• Other lighting equipment
• Other machine elements

This catalog is a comprehensive catalog of standard hydraulic equipment from NACHI-Fujikoshi Corp. The company produces and sells various hydraulic equipment as a comprehensive hydraulic equipment manufacturer, delivering excellent products to various industries. We have compiled only the standard hydraulic equipment from our numerous production and sales items, and it is organized by type, so please use it for your hydraulic plans or product inquiries. [Contents (partial)] <NACHI Hydraulic Pumps> ■ Features and handling of hydraulic pumps ■ Hydraulic pump selection table ■ Piston pumps ■ Vane pumps ■ Gear pumps *For more details, please refer to the PDF materials or feel free to contact us.

• Hydraulic Equipment
• Other pumps

The "FINE U-NUT/TWIN FU-NUT" is a product developed as a locking nut for bearings. It allows for arbitrary and appropriate positioning, making torque management easy. It eliminates the need for keyway machining on shafts and the installation of toothed washers, while also facilitating precision adjustments, leading to improved work efficiency and a reduction in total costs. 【Features of FINE U-NUT】 ■ Reusable ■ No skilled techniques required for assembly ■ No keyway machining on shafts required ■ Improved rotational balance of shafts and bearings ■ Can use thin-walled hollow shafts ■ Eliminates the need for machining, parts, and techniques, achieving a reduction in total costs *For more details, please refer to the PDF document or feel free to contact us.

• nut

This catalog is a comprehensive catalog of "NACHi bearings" manufactured by NACHI-FUJIKOSHI Corp. In addition to introducing products such as "deep groove ball bearings," "angular contact ball bearings," and "self-aligning ball bearings," it also includes explanations on "types and features of rolling bearings" and "how to choose rolling bearings." It serves as a useful reference when selecting products. We encourage you to read it. 【Contents (partial)】 ■ Explanations ■ Deep groove ball bearings ■ Angular contact ball bearings ■ Self-aligning ball bearings ■ Cylindrical roller bearings *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Plastic bearings

This catalog is the comprehensive plate catalog of Futaba Electronic Industry Co., Ltd. We offer a wide range of products, including "Precision Plates," which are standardized in a variety of sizes and delivered in a short lead time, and "High-Precision Plates," which have received positive feedback for reducing or alleviating processing work hours, focusing on accuracy and size specifications. This catalog serves as a useful reference when selecting products. We encourage you to take a look. 【Contents (partial)】 ■ Delivery times and prices ■ High-Precision Plates ■ Milling-Free Plates ■ Precision Plates ■ Precision Mini Plates *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts
• Other machine elements

This catalog features the "Air Floating Free Bear Unit" from Free Bear Corporation. It is compatible with press machines and demonstrates its power in the smooth transportation of molds. Included are the "FAD18T series" compatible with T-slot size 18 and the spring-return "FAD22T series" compatible with T-slot size 22. We encourage you to read through it. [Contents (partial)] ■AFU-32S series ■AFU-65S series ■AFU-65L series ■AFU-2743W series ■AFU-130W series *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Plastic bearings

We would like to introduce the "Free Bear Unit / Free Bear Table" from Free Bear Corporation, which we handle. The "Free Bear Unit" can be customized to fit existing equipment and can build a transport system tailored to your needs at a low cost. The "Free Bear Table" is suitable for various environments, including the transport of heavy objects, direction changes, and workstations, providing functions that enhance work speed, reduce costs, and improve safety, resulting in significant benefits. [Features] <Free Bear Unit> - Achieves labor-saving and efficiency in transporting heavy objects - Custom-made to fit existing equipment - Capable of building a transport system tailored to your needs at a low cost *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• belt

We would like to introduce the "Air Floating Free Bear Unit" from Free Bear Corporation, which we handle. This product excels in situations where accurate and smooth transportation of jigs, molds, and workpieces is required. With this product, a 1-ton load can be transported effortlessly with just 0.2 to 0.3 kN (20 to 30 kgf) of force, allowing for 360° movement as desired. Positioning can also be done in a short time. Furthermore, since it uses air, it helps maintain a clean working environment. Please feel free to contact us if you have any inquiries. 【Features】 ■ Excels in situations requiring accurate and smooth transportation ■ A 1-ton load can be transported with just 0.2 to 0.3 kN (20 to 30 kgf) of force, allowing for 360° movement as desired ■ Positioning can be done in a short time ■ Transportation and seating of heavy objects can be done effortlessly *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Plastic bearings

We would like to introduce the "Free Bear Standalone Products" from Free Bear Corporation, which we handle. By using this product, the friction on the transported items changes from "sliding friction" to "rolling friction," making it possible to move the items easily. In addition to the "Y-type," which achieves high quality through extensive experience and technical expertise, and the "L-type," which adapts to various environments, we also offer products designed for clean rooms. Please feel free to contact us if you have any requests. 【Product Lineup (Partial)】 ■Y-type ■L-type ■L-5/L-6-type ■B-type ■S-type *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

The "Quick Sleeve" is a product manufactured by Fuji Seiko that can immediately solve the problem of wear grooves caused by the lip of oil seals. There is no need to remove or rework the worn shaft; it does not cause any downtime and does not interfere with production. Additionally, the thickness of this product is designed to be ultra-thin (0.3t), allowing the existing oil seals to be used. 【Features】 ■ Labor-saving and significantly reduced maintenance work ■ No need to remove the shaft ■ Oil seal size remains unchanged ■ The outer surface finish is completed to 2-2.5S, requiring no additional processing ■ Comes with a driving tool *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Ultra-Thin Steel Belt" features rounded edge processing at both ends of the belt and can also be drilled. There is no melting at the ends of the belt, and the bead is subjected to rolling processing, resulting in high hardness and increased strength. There is minimal noise and vibration. It is suitable for applications such as assembly and transport of electronic components in clean rooms, as well as conveyor belts for food manufacturing. Please feel free to contact us if you have any inquiries. 【Features】 ■ Minimal noise and vibration ■ High hardness and increased strength ■ Increased tensile strength due to angle welding ■ Custom sizes available from 0.05 mm to 0.8 mm ■ Rounded edge processing and drilling at both ends of the belt are also possible *For more details, please refer to the PDF document or feel free to contact us.

• belt

The "air spring" from Endyne, which we handle, is a product designed and manufactured in collaboration with the American tire manufacturer Goodyear. It can be used for two types of applications: as an actuator and for vibration prevention. Structurally, it consists of a flexible member made of rubber and a metal retainer. The flexible member is made using either natural rubber reinforced with fabric or wing planes, making it a product that excels in durability and cost-effectiveness. 【Features】 ■ Good vibration isolation (sleeve type, rolling lobe type) ■ Good height during compression (bellows type) ■ Small vertical spring constant (sleeve type, rolling lobe type) ■ Economical (sleeve type) ■ Large lateral spring constant (bellows type, especially type 1B) *For more details, please refer to the PDF materials or feel free to contact us.

• Spring

This catalog introduces the "Shock Absorber and Speed Controller" manufactured by Endine Co., Ltd. It includes the adjustable shock absorber "Compact Series ECO OEM/ECOLROEM" and the speed controller "Hydraulic Damper ADA500." Additionally, it contains safety precautions, a product quick reference table, and information on shock absorption theory, making it a useful resource for those considering implementation. We encourage you to read it. 【Contents】 ■ Introduction ■ Precautions ■ Introduction to Shock Absorbers ■ Adjustable Shock Absorbers ■ Fixed Shock Absorbers ■ Speed Controllers *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• controller

The "Compact Servo Press" is a product that has achieved a compact size equivalent to hydraulic presses through downsizing. By using a servo motor drive, it reduces energy consumption and offers excellent quietness. It optimizes cycle time by precisely controlling load, position, speed, and time. It provides real-time feedback on operating conditions to prevent workpiece damage. Additionally, a holding brake to prevent the output shaft from dropping during power outages is standard equipment. Please feel free to contact us if you have any requests. 【Features】 ■ Compact ■ Consideration for the environment ■ Improved productivity ■ Maintenance of productivity ■ Easy setup ■ Safety design *For more details, please refer to the PDF materials or feel free to contact us.

• Servo

The "MPU60" is a compact and upgraded servo press controller. It allows for rewriting of pressurization parameters from Fieldbus. With a judgment function for up to 32 zones, it ensures that no defects are overlooked. Additionally, the intuitive user interface has improved operability. Please feel free to contact us if you have any requests. 【Features】 ■ Diverse pressurization control and judgment functions for quality improvement ■ Rewriting of pressurization parameters from Fieldbus ■ Judgment function for up to 32 zones to ensure no defects are missed ■ Supports Japanese, English, and Chinese ■ Integration of MU and SPU, reducing size by 50% for space-saving *For more details, please refer to the PDF document or feel free to contact us.

• Servo

The "EH2-LTA1113" is a large tracer arm that supports tightening up to a maximum of 600 N·m. It measures the positions of any two reference points on the workpiece and corrects for lateral and rotational deviations in the X,Y coordinate plane. This ensures stability in the positioning of the workpiece even during tightening processes that may be unstable. The arm length is 1100×1300 mm, with a recommended working area of 2000×1500×1000 mm, and the arm's vertical travel length (st) is 1466 mm. Please feel free to contact us if you have any inquiries. 【Features】 ■ Position detection ■ Pressure relief ■ Poka-yoke ■ Supports tightening up to a maximum of 600 N·m ■ Accommodates various tightening directions *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Handy 2000 Series" is a hand nut runner from Estic Corporation equipped with "pulse tightening technology" that achieves low reaction force. It allows tightening with a maximum torque of 140 N·m even with collaborative robots. While leveraging the features of the hand nut runner, it enables the automation of high-torque tightening, which places a significant burden on operators, by detecting tightening failures and ensuring traceability. Additionally, it is officially certified as a UR+ product, allowing for reduced design and adjustment time for screw tightening robots. 【Features】 ■ Tightening with a maximum torque of 140 N·m ■ UR+ certification obtained ■ Simple configuration with reduced wiring *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots

We would like to introduce the "ERS Series Orthogonal Robots" manufactured by Estic, which we handle. With our modular order system, you can simply select the desired model, tightening torque, and transport surface height for bulk ordering and delivery. We offer "Full Specification Models," "Standard Models," and "Entry Models." Additionally, when modifying for process changes, installation is easy—just integrate it into the conveyor. Please feel free to contact us if you have any inquiries. 【Modular Order System Features】 ■ High Quality ■ Low Cost ■ Short Delivery Time ■ Bulk Ordering ■ Bulk Delivery *For more details, please refer to the PDF materials or feel free to contact us.

• Cartesian Robot

The "ERS Series" is a new robotic system proposed by Estic Co., Ltd. Control the robot from the nut runner. Since it can be centrally managed, programming the nut runner alone is sufficient. This can shorten the cycle time. You can directly move the robot to set the tightening points, and the camera correction function automatically adjusts for any misalignment of the workpiece. 【Features】 ■ Direct teaching: Easy setup ■ Vision position correction function (optional): Increased productivity ■ Z-axis thrust control function: Improved quality ■ Dedicated commands: Reduced cycle time ■ Management software: Batch settings *For more details, please refer to the PDF document or feel free to contact us.

• SCARA Robot

This catalog introduces the aluminum frames of Aoki Precision Industry Co., Ltd. The possibilities of aluminum frames are endless, including fences, covers, racks, carts, stands, desks, stairs, ladders, and more. There have been achievements of cost reductions by up to 70% through the replacement with our products. In addition to product introductions, we also include usage examples, so please make use of this when considering implementation. 【Featured Products】 ■ ALUMI FRAME system20 ■ ALUMI FRAME system30 ■ ALUMI FRAME system40 ■ Flex Guard Fence *For more details, please refer to the PDF materials or feel free to contact us.

• aluminum
• Other machine elements

We would like to introduce our precision positioning table 'LH'. It features a long-term maintenance-free design with an integrated C-groove. The optimal amount of oil is always maintained in the load area, ensuring long-lasting lubrication performance, and new lubricant is continuously supplied to the surface of the capillary lubrication body that comes into contact with the rolling elements from other parts. We offer both single-axis and dual-axis configurations with high travel accuracy and positioning precision. 【Features】 ■ High reliability and precision with carefully selected components ■ High rigidity with a large load capacity ■ High travel accuracy and positioning precision ■ Available in a series up to an ultra-large size with a table width of 420mm ■ Long-term maintenance-free design with an integrated C-groove *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "BMK4000" is a Japanese-made air-operated caliper. It generates a large force at low air pressure. By changing the air pressure, you can adjust the holding force and braking force. The maximum operating air pressure is 0.5MPa, and the maximum dynamic braking force is 4000N. Please feel free to consult us when you need assistance. 【Features】 ■ Generates a large force at low air pressure ■ Space-saving ■ Adjustable holding force and braking force by changing air pressure ■ Air-operated ■ Easy installation *For more details, please refer to the PDF materials or feel free to contact us.

• Brake parts
• Control Panel

This catalog features caliper brakes and DISK. We introduce a variety of products including the BCF type (disk caliper type), BCH type (caliper type disk brake), and BTC type (caliper type disk brake). In addition to features, structure, and operation, it also includes images and diagrams, making it a useful reference when considering implementation. We encourage you to take a look. [Contents (excerpt)] ■ BCF type (disk caliper type) ■ BCH type (caliper type disk brake) ■ BTC type (caliper type disk brake) ■ BD type (air & spring operated large caliper brake) ■ SPC type (air & spring operated large caliper brake) *For more details, please refer to the PDF document or feel free to contact us.

• Brake parts
• Control Panel

This catalog introduces air clutches and brakes manufactured and sold in Japan. It includes an overview of the products, featuring various items such as the CSCP type (standard type) and CSMP type (micro type) "air clutches," as well as the BSM type (micro type) "air brakes." It provides details on features, structure, operation, as well as drawings and key dimension tables, making it a useful reference when considering implementation. [Contents (excerpt)] ■ Product Overview ■ Air Clutches ■ Air Brakes ■ Caliper Brakes ■ Air Clutch Brakes *For more details, please refer to the PDF materials or feel free to contact us.

• clutch
• Brake parts

We offer "bearing units with triple seals" that feature excellent dust and moisture resistance. Achieving compactness and long service life, we use stainless steel for the rubber seal core material, allowing us to propose all-stainless bearing units with a triple seal specification. Since it is applicable to insert bearings of the UC type (JIS standard compliant), it can be replaced with standard products. Please feel free to consult us when needed. 【Features】 ■ Excellent dust and moisture resistance ■ Stainless steel used for the rubber seal core material ■ Reduction of maintenance costs possible ■ Achieves compactness ■ Replaceable with standard products *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

We handle "heat-resistant insert bearing units" that have undergone special treatment to fully utilize the excellent properties of fluorine-based heat-resistant grease. Applicable to various JIS-type units. Ideal for use in situations where lubrication grease replenishment is difficult, such as in oil-free applications, maintenance inspections, and where costs for lubrication systems can be high. The rotational speed limit is 100,000 dmn value (dm: average diameter in mm of the inner and outer diameters of the bearing, n: rotational speed in r/min). Please feel free to consult us when you need assistance. 【Features】 ■ Excellent performance in high temperatures and humidity ■ Equipped with a sealing device that is heat-resistant, dust-proof, and moisture-proof ■ Capable of withstanding long-term use ■ Outstanding longevity and stable performance ■ Maintenance-free, significantly reducing costs *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

We offer a convenient "mini frame take-up type ball bearing unit" that allows for the adjustment of the axis position to provide tension for conveyor belts and similar applications. The bearing box is made of two molded steel plates and features a spherical bearing seat to hold the ball bearings, parallel grooves to guide the axis movement, and an adjustment bolt located in the center. Additionally, it has a large adjustment range and sufficient rigidity, ensuring smooth alignment. 【Features】 ■ Smooth alignment ■ Compact and lightweight ■ Easy installation *For more details, please refer to the PDF materials or feel free to contact us.

• Metal bearings

The "Aluminum Series" is an insert bearing unit designed to reduce weight by incorporating stainless steel insert bearings into aluminum alloy bearing housings. Both the stainless steel bearings and the aluminum alloy housings are made from materials that excel in corrosion resistance, demonstrating outstanding performance in water and chemical resistance. Additionally, the unit with a stainless steel cover protects the rotating parts of the shaft and bearing, enhancing safety and dust resistance. 【Features】 ■ Excellent corrosion resistance ■ Lightweight ■ Compatibility with JIS shapes *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

The "Plastic Series" is an insert bearing unit that has alignment properties and excellent corrosion resistance. The stainless steel bearings are filled with food-grade grease, making them safe for use in food machinery. They also comply with the RoHS directive. The flange type allows for the installation of a back seal, which can prevent the intrusion of dirt and moisture from the mounting surface, further enhancing dust and moisture protection. 【Features】 ■ Excellent corrosion resistance ■ Usable in food machinery ■ Comes with a back seal *For more details, please refer to the PDF document or feel free to contact us.

• Plastic bearings

The "sliding bearing unit" uses ultra-high molecular weight polyethylene for the bearing, and ultra-high molecular weight polyethylene, zinc alloy die-cast, and stainless steel cast steel for the bearing housing, incorporating them to provide mutual alignment and correct any misalignment of the shaft axis. Additionally, the "slide sliding bearing" can support linear motion shafts or allow block-type bearings to slide against the shaft. These units and bearings excel in corrosion resistance, making them safe for use in applications such as food machinery. 【Sliding Bearing Features】 ■ Resistant to most chemicals ■ No lubricant is required on the sliding surface, making it hygienic ■ Low specific gravity allows for weight reduction ■ Mounting dimensions are compatible with JIS standards ■ Low water absorption allows for use in water *For more details, please refer to the PDF document or feel free to contact us.

• Plastic bearings

The "Eco Series" is an all-stainless steel bearing unit that uses stainless steel cast SCS13 for the bearing box, SUS440C equivalent for the bearings, and SUS303 for the eccentric wheel. It is filled with grease suitable for food machinery, making it safe for use in food machinery. Its compact design contributes to smaller equipment design, helps save energy and resources, and complies with the RoHS directive. The eccentric wheel method allows for easy and secure fixation to the shaft, reducing stress corrosion cracking of the inner ring caused by set screw fixation. 【Features】 ■ Excellent corrosion resistance and strength ■ Beautiful appearance ■ Environmentally friendly, compact, and lightweight ■ Easy fixation to the shaft *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

The "Stainless Series" is an insert bearing unit with excellent corrosion resistance. The MUC-V type bearing is standardly equipped with grease suitable for food machinery (compliant with H1 standards), making it safe for use in food machinery. It features a beautiful appearance due to lost-wax precision casting, and the mounting surface is smooth, preventing the accumulation of foreign substances. It is compatible with JIS type insert bearing units, and there is self-aligning capability between the insert bearing and the bearing housing. 【Features】 ■ Suitable for food machinery ■ Excellent corrosion resistance ■ Compatible with JIS type insert bearing units ■ Beautiful appearance with a hygienic design *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings