藤川伝導機 List of Products and Services

The "Oi-sugu Flange" is a product that allows for piping connections without welding. By using a dedicated tightening device, even those without specialized skills such as welding can easily and reliably perform the installation. There is no need for fire prevention measures before welding or pickling after welding, significantly reducing equipment downtime and making recovery work during troubles easier. 【Features】 ■ The sleeve firmly holds the pipe ■ Significant reduction in piping labor *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

We would like to introduce our stainless steel pipe fittings, "I-fit." It consists of two parts: the main body and the nut (the ferrule is integrated with the nut). This eliminates construction troubles such as dropping or losing the ferrule and incorrectly orienting the ferrule. For the 3/4 and 1-inch sizes, the tightening torque is reduced by approximately 30%, making it suitable for welding-free piping construction. 【Features】 ■ Two-part design: main body and nut ■ For 3/4 and 1-inch sizes, tightening torque is reduced by approximately 30% ■ Suitable for welding-free piping construction *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

"FF Datchakun" is a detachable joint developed as an alternative to quick joints. While retaining the advantage of "easy detachment" typical of general quick joints, it achieves reduced pressure loss and energy savings by maximizing the flow path (full flow, total flow). Equipped with a foolproof mechanism (it cannot be detached when the handle is in the "open" position, and when it is detached, the handle cannot be set to "open"), it prevents erroneous operations. 【Features】 ■ Flow path = "total flow" ■ Low fluid resistance, leading to energy savings ■ Peace of mind with the "foolproof mechanism" *For more details, please download the PDF or feel free to contact us.

• Pipe Fittings

The "Painting Set II" is a product that achieves excellent paint application efficiency (75%), reducing masking labor, improving the work environment, and minimizing the amount of paint used. It enhances workability with a wide pattern width (maximum effective pattern of 270mm). It is compatible with water-based paints (the liquid contact parts are made of stainless steel). In addition to the φ1.3mm type (13P), there is also a φ1.5mm type (15P) that can handle high-viscosity materials. 【Features】 ■ Low air consumption (230NL/min), suitable for simple compressors ■ The tank comes with a container for easy cleaning ■ Affordable price for interior and exterior painting, as well as shutter painting *For more details, please download the PDF or feel free to contact us.

• hose

We would like to introduce the "O-Light II / Pressure Tank Series" that we handle. The "O-Light II" is a high-performance spray gun that improves the gun surface area that touches the palm, enhancing the fit. The "Pressure Tank Series" includes two products: a large-capacity "pressure tank" and a "pressure cup" that can be carried with one hand. 【Features of O-Light II】 ■ A streamlined design improved based on ergonomics, exuding a sense of luxury ■ Reduces wrist fatigue (load) ■ Achieves high atomization and high coating efficiency in the medium-low pressure range (0.15 to 0.2 MPa) ■ Improved maintenance and performance ■ Easy to adjust *For more details, please download the PDF or feel free to contact us.

• tank

The "Suction Dust Beauty III" is a direct pressure small vacuum blaster designed to improve mobility in tight spaces by reducing the weight of the device and making it easier to move by attaching casters to both the main injection part and the dust part. By structuring it to allow for the reuse of collected abrasive materials (such as alumina), significant resource conservation has been achieved. It can secure a blasting surface comparable to open blasting and perform a type of substrate adjustment (Sa2 1/2). 【Features】 ■ Dust-free operation creates a comfortable working environment ■ The system is compact and easy to move and assemble ■ The nozzle uses a diameter of 6mm, resulting in high work efficiency ■ Minimal protective measures are required ■ Resource-saving design allows for the reuse of abrasive materials *For more details, please download the PDF or feel free to contact us.

• Dust collector

The "O-Light II" is a high-performance spray gun with an improved design based on ergonomics, enhancing the fit. All models adopt LVMP (Low Volume Medium Pressure) specifications for high coating efficiency, achieving fine atomization and high application efficiency, making it suitable for a wide range of applications with just one unit. We offer three types: gravity feed, suction feed, and pressure feed. 【Features】 ■ A sleek, luxurious design improved based on ergonomics ■ Reduces wrist fatigue (load) ■ Achieves fine atomization and high application efficiency in the medium-low pressure range (0.15–0.2 MPa) ■ Improved maintenance and performance ■ Easy to adjust *For more details, please download the PDF or feel free to contact us.

• spray

The "O-LightII" is a high-performance spray gun with an improved design based on ergonomics, enhancing the fit. All models adopt LVMP (Low Volume Medium Pressure) specifications for high coating efficiency, achieving fine atomization and high application efficiency. Additionally, it can be used for a wide range of applications with just one unit. We offer three types: gravity feed, suction feed, and pressure feed. 【Features】 ■ A sleek and luxurious design improved based on ergonomics ■ Reduces wrist fatigue (load) ■ Achieves fine atomization and high application efficiency in the medium to low pressure range (0.15 to 0.2 MPa) ■ Improved maintenance and performance ■ Easy to adjust *For more details, please download the PDF or feel free to contact us.

• spray

This catalog introduces fasteners and fastening components that can be opened and closed freely as many times as needed. We offer a variety of products, including "lever fasteners" that allow doors to be pulled into the housing with a lever operation, and "fastening components for aluminum frames" that enable easy jointing of aluminum frames. Detailed information about each product's features and specifications is provided. We encourage you to take a look. 【Featured Products】 ■ Lever Fasteners ■ Fastening Components for Panels ■ Fastening Components for Aluminum Frames ■ Pipe Clamps *For more details, please download the PDF or feel free to contact us.

• fastener

This catalog introduces the "casters and wheels" that we handle. We feature a diverse lineup that includes not only variations in load capacity and height, such as ultra-heavy-duty types with a maximum load capacity of 3.6 tons per unit and medical casters designed with high aesthetics and operational ease in mind. You can choose from various elements, including wheel materials suited to the floor surface, mechanisms in the axle that ensure smooth movement, and additional features such as locks and brakes. [Featured Products (Excerpt)] ■ Heavy-duty casters (ultra-starting performance) ■ Heavy-duty casters (others) ■ Medical and design casters ■ Single-wheel casters ■ Double-wheel casters *For more details, please download the PDF or feel free to contact us.

• caster

This catalog introduces the "Adjusters and Five-Leg Bases" that we handle. The adjusters range from ultra-heavy-duty types with a maximum allowable load of 11,000 kgf to convenient small types that can be adjusted in height by hand, offering a wide variety of sizes and base materials. We also feature five-leg bases that are well-suited for medical use, such as drip stands and carts. Please make use of this information when selecting products. [Contents (excerpt)] ■ Seismic isolation specifications ■ Large adjusters ■ Medium adjusters ■ Small adjusters ■ Adjuster bases *For more details, please download the PDF or feel free to contact us.

• Other machine elements

This catalog introduces the "elevating device" that allows you to change the height of workbenches and robot stands. We offer a variety of movable types that can be selected according to your needs. An interface that can be connected to a PLC is also included. Please make use of this when selecting products. 【Featured Products】 ■ Electric Type ■ Manual Type *For more details, please download the PDF or feel free to contact us.

• Other conveying machines

This catalog introduces the "monitor arms and monitor mounts" that we handle. We offer a lineup of highly convenient products, including types that allow angle adjustments with a free-stop mechanism and do not require screw adjustments, as well as those that enable diverse designs and installations through combinations of arms. Detailed information on each product's features, specifications, and applications is provided, so please take a moment to read through it. [Featured Products] ■ High-performance, high-durability type ■ High-load type ■ Monitor mount hinge ■ Monitor arm ■ Mounting system *For more details, please download the PDF or feel free to contact us.

• Other machine elements

This catalog introduces the "Wiring Parts and Packing" that we handle. The wiring parts come in a wide range of options, including various shapes and sizes of cables, colors that easily match enclosures, and special features to prevent oil mist intrusion. The packing includes various types such as IP-compliant products, conductive, oil-resistant specifications, and those with steel wire. [Featured Products] ■ Grommets ■ Wiring holes ■ Cable-related items ■ Packing *For more details, please download the PDF or feel free to contact us.

• Wiring materials

This catalog introduces lighting fixtures using light-emitting diodes (LED lights). We offer a lineup that includes flexible layouts such as "tape lights" and "under-eave lights." Additionally, we feature "tough lights" that are suitable for inspection lights in machine tools and factories, with oil-resistant, waterproof, and dustproof specifications (IP67F) and high-temperature and high-water-pressure specifications (IP69K). 【Featured Products】 ■ Tape Lights ■ Tough Lights ■ Under-Eave Lights *For more details, please download the PDF or feel free to contact us.

• LED lighting

This catalog features a wide variety of products, ranging from general-purpose items like bearings and shelf brackets to belt reels, glass fixing hardware, and waste inlet openings. It includes various products such as "silicone bellows" used for linear motion devices and cable protection, as well as "hole plugs" for sealing unused processing holes. Each product includes details on features, specifications, and dimensional drawings, so please take a moment to read through it. [Contents (excerpt)] ■ Corner caps ■ Bearings ■ Turntables ■ Silicone bellows ■ Stainless steel waste inlet openings *For more details, please download the PDF or feel free to contact us.

• Metal bearings

This product is a touch-up container born from the voices of the field. It allows for the simultaneous use of four colors with one unit. You can freely partition water-based and solvent-based paints. Please feel free to contact us when you need assistance. 【Available Containers】 ■ Hanging can ■ 3L poly can ■ Step-type hanging can ■ Tapered can *For more details, please download the PDF or feel free to contact us.

• Plastic utensils and containers

The "CVF" is a high-temperature bellows valve (450℃) that operates with air (NC). The operating pressure is 1.5MPa, the operating temperature is 450℃, and the connection is butt welding. Other sizes and connections are also available. Please feel free to contact us when you need assistance. 【Sizes】 ■32A ■40A *For more details, please download the PDF or feel free to contact us.

• valve

We would like to introduce our Y-shaped bellows seal valve, the 'CVY Series.' It features a stainless steel body, and the inner surface can be finished with electropolishing. It is suitable for applications involving high-purity gases, toxic gases, and vacuum piping. 【Main Component Materials】 ■ Body: SCS16A/SUS316L ■ Disk: PTFE/PCTFE ■ Bellows: SUS316L ■ Gasket: PTFE/PCTFE ■ Bonnet: SCS13A ■ Handle: Resin/A5056 *For more details, please download the PDF or feel free to contact us.

• valve

The "HBV" is a bellows valve developed for use under high-temperature conditions, featuring excellent heat resistance and airtightness. The operating pressure ranges from vacuum to 1 MPa, with automatic valve operation pressure between 0.4 and 0.6 MPa. It is available in three nominal sizes: 1/4", 3/8", and 1/2". Please feel free to contact us when you need assistance. 【Features】 ■ Equipped with PEEK resin on the seat for high heat resistance ■ Features a metal bellows seal for high airtightness and durability ■ Oil-free treatment through precision cleaning of liquid-contact parts ■ Assembly and packaging in a clean room *For more details, please download the PDF or feel free to contact us.

• valve

The "HFD series" is a valve capable of flowing a large volume with excellent cleanliness. While ensuring airtightness equivalent to conventional metal diaphragm valves, it achieves a smooth flow path by increasing and optimizing the opening and closing lift amount, enabling large flow rates. Additionally, it features an opening and closing display function, allowing the opening and closing status to be easily confirmed at a glance. 【Features】 ■ Achieves large flow rates by maximizing the flow path ■ Minimal dead space in the gas contact area, excellent gas replaceability and cleanliness ■ High airtightness due to diaphragm sealing ■ Oil-free treatment through precision cleaning of gas contact parts *For more details, please download the PDF or feel free to contact us.

• valve

We would like to introduce our high-temperature ball valve 'IV3F' that we handle. The operating pressure is 0 to 0.1 MPa, the operating temperature is -10 to 220°C, and the connection is NW flange. We offer products in three sizes: 25A, 40A, and 50A. Please feel free to contact us when you need assistance. 【Product Lineup】 ■A-12909-25NW ■A-12909-40NW ■A-12909-50NW *For more details, please download the PDF or feel free to contact us.

• valve

In this catalog, we introduce a variety of security components tailored to different applications and security levels. By combining three basic elements—housing, inserts, and cams—along with a range of options, we can meet diverse needs with our lock system "Quarter Turn," as well as a wide selection of seals, electric locks, and more. Please make use of this for selecting products. [Contents (partial)] ■ Selection Guide ■ Cylinder Locks ■ Quarter Turn ■ Locks for Glass Doors ■ Locks for Wooden Doors *For more details, please download the PDF or feel free to contact us.

• Other machine elements

This catalog introduces components such as "catch latches" that hold doors and other items in a closed position. We offer a wide range of specifications for magnetic catches, including various sizes, adhesive strengths, and heat resistance, as well as a rich selection of latches that allow for detailed usability through various "release" mechanisms such as levers and pushes. Please make use of this for product selection. [Contents (partial)] ■ Selection Guide ■ Magnetic Catches ■ Door Catches ■ Push Latches ■ Latch Handles *For more details, please download the PDF or feel free to contact us.

• Other machine elements

In this catalog, we introduce components that serve as handles when opening and closing doors and lids, namely "handles, grips, and knobs." We feature the "Toughness & Beautility HANDLE Series," which combines strength (Toughness) capable of withstanding various usage environments and functional beauty (Beautility) pursued for an optimal operating feel, along with the "Zwei L Series," "DST Series," and more. Please make use of this for selecting products. [Contents (partial)] ■ Selection Guide ■ Large Handles ■ Surface-Mounted Handles ■ Backstop Handles ■ Recessed Handles *For more details, please download the PDF or feel free to contact us.

• Other machine elements

This catalog introduces "guide rails and slide rails," which are components of linear motion mechanisms. It features a wide range of guide rails, including roller types, ball retainer types, and sliding types (bearingless), as well as slide rails that are compact and thin, up to ultra-heavy-duty slide rails with a maximum load of 5.46 tons per pair. Please make use of this for selecting products. [Contents (partial)] ■ Selection guide ■ Roller type ■ Sliding type ■ Ball retainer type ■ Free stop type *For more details, please download the PDF or feel free to contact us.

• Other machine elements

In this catalog, we introduce a more complex group of components known as "cabinet door hardware and shutters," which are more intricate than hinges that open and close doors or lids. We feature a wide range of items, including flat door hardware with a soft-close function, components that allow doors to be stored on the side of the cabinet, parts that enable doors to slide up and down for opening and closing, and components that can fold the door when opened. Please make use of this for selecting products. [Contents] ■ Selection Guide ■ Flat Door Hardware ■ Vertical Storage Door Hardware ■ Sliding Doors ■ Folding Doors ■ Shutters *For more details, please download the PDF or feel free to contact us.

• cabinet

In this catalog, we introduce components such as "stay gas springs" that control doors and lids to prevent them from opening beyond a certain angle and maintain their position. We offer a wide variety of stays that incorporate friction, resistance, and spring counterforces, allowing doors and lids to be held in place, closed gently, or opened easily, as well as gas springs that assist in the opening and closing of equipment lids. Please make use of this for selecting products. [Contents (partial)] ■ Power assist stays ■ Gas springs ■ Oil dampers ■ Lapcon stays (dampers) ■ Torque stays (free stop) *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We would like to introduce our small batch wastewater treatment device, the 'SCB model'. We offer four types: the "SCB-300-2" with a processing capacity of 300L, the "SCB-600-3" with a capacity of 600L, the "SCB-1000-5" with a capacity of 1000L, and the "SCB-2000" with a capacity of 2000L. Additionally, we also have the "Small Continuous Wastewater Treatment Device (SC model)" and the "Wastewater Treatment Device (SE model)" which are coagulation and sedimentation type and continuous type, respectively. 【Product Lineup】 ■SCB-300-2 ■SCB-600-3 ■SCB-1000-5 ■SCB-2000 *For more details, please download the PDF or feel free to contact us.

• Wastewater/wastewater treatment equipment

We handle the "wastewater treatment equipment" from Showa Machinery Trading Co., Ltd. The company has developed an electrically operated wastewater treatment device that addresses customer needs, particularly focusing on the composition and treatment of oily wastewater, especially emulsions. For wastewater containing heavy metals and metals, we can remove metal ions below the standard values by combining it with pH adjustment. Additionally, it is highly efficient and compact, requiring minimal installation space. 【Features】 ■ High efficiency emulsion treatment ■ No moving parts inside the tank, eliminating causes of failure ■ Chemical addition is automated, making management easy with minimal chemical usage, allowing for continuous operation ■ Low voltage for electrical capacity results in less wear and longer lifespan ■ Easy handling due to automated continuous operation from stable mechanical load and simplified equipment *For more details, please download the PDF or feel free to contact us.

• Wastewater/wastewater treatment equipment

We would like to introduce the "high-frequency induction heating equipment" that we handle. Induction heating technology is widely used in the industrial sector due to its excellent characteristics, such as high heating efficiency, high reliability, and the realization of a clean working environment. SKS's high-frequency power supply has achieved high performance, high quality, and low cost through numerous technological innovations, and is adopted for various applications according to needs. Please feel free to contact us when you need assistance. 【Features】 ■ Compact and lightweight ■ Instant heating capability ■ Uniform heating capability ■ Easy automation ■ Localized heating capability *For more details, please download the PDF or feel free to contact us.

• Heating device

The "SVP-1015NV" is a pressure casting machine that melts base metals such as gold, silver, and white gold in a vacuum or gas atmosphere, and drops (injects) the molten metal into a mold. It allows for various casting mode settings, including simultaneous vacuum suction of the mold chamber during pressurization. By providing twin pressurized piping from the charge tank, compressed air flows into the melting chamber from two ducts simultaneously, ensuring not only simple pressurization but also a focus on instantaneous pressurization speed. 【Features】 ■ High-frequency output has been upgraded from the conventional 5kW to 10kW. ■ Equipped with a high-output transistor inverter capable of melting high-melting-point base metals. ■ The twin pressurized ducts allow for instantaneous pressurization even with base metals that have poor flow. ■ Pressurization time and timing can be set arbitrarily in 0.1-second increments. ■ In addition to manual and fully automatic modes, a semi-automatic mode is also included. ■ Equipped with a highly flexible control mode. *For more details, please download the PDF or feel free to contact us.

• Casting Machine

The "TVA-1065-TR" is a high-frequency induction heating and centrifugal casting machine that quickly melts high-melting-point metals such as platinum alloys and white gold. Temperature measurement is accurately controlled using a high-precision radiation thermometer, while the centrifugal force from the inverter/motor ensures that the molten metal is reliably poured into the mold. Rapid melting reduces heat dissipation from the mold, and the initial speed (startup) of the mold rotation, which is crucial for centrifugal casting, can be finely adjusted in 0.1-second increments using an inverter-controlled 1.5 kW motor. 【Features】 ■ Ensures sufficient melting speed for platinum alloys requiring pouring temperatures over 2000°C ■ Centrifugal rotation motor driven by inverter control ■ Mode for manual preliminary melting or fully automatic execution of a series of casting operations ■ Equipped with a highly flexible control mode that allows for intuitive manual operation by the operator *For more details, please download the PDF or feel free to contact us.

• Casting Machine

The "G type" is a bridge anti-fall device that can mitigate shocks even under repeated loading. By using a shockless chain coated with rubber, it can reliably absorb shocks during an earthquake. If there is no deformation after the earthquake load is applied, it can be reused without replacement. The rubber material is a vulcanizate made from a mixture of natural rubber and synthetic rubber. The surface treatment of the steel materials is done with hot-dip galvanizing HDZ 55 (JIS H 8641) to ensure durability. 【Features】 ■ Reliable shock absorption during earthquakes due to the use of a rubber-coated shockless chain ■ Installation position can be changed according to the situation of interfering objects ■ The size of the installation bracket can be reduced ■ Even if the bridge has an angle, it can be accommodated by changing the number of links and the installation angle *For more details, please download the PDF or feel free to contact us.

• Chains and sprockets

Showa Machinery Trading Co., Ltd. is a company that handles various types of chains for fishing nets and slings used in shipbuilding and steel industries. With its cultivated technology and achievements, the company actively promotes the development of related products such as conveyor chains for transportation, wastewater treatment equipment that addresses environmental issues, and new products that apply high-frequency rapid heating to meet FA needs, focusing on rationalization and labor-saving devices. SKS provides valuable technology and products across various industrial fields, looking at the times and society with the group's full strength and challenging creativity. **Features** - Active in various fields and applications from industrial to general use - Full-line system that responds to multiple needs - Covers conveyor needs from design to manufacturing - Rationalization and labor-saving devices using unique high-frequency heating technology - Actively entering the ecology field with various pollution prevention equipment *For more details, please download the PDF or feel free to contact us.*

• Chains and sprockets

The "Pau SP-200 model" is a device that treats non-drainable wastewater by adding powder. Once the powder is added, it operates automatically, making it easy to use. It can be operated by connecting to a 100V outlet and a hose, so no construction is required. It can treat wastewater using only the addition of powder, without the use of chemicals (liquids). Its compact size and simple structure result in low equipment costs. 【Specifications (partial)】 ■ Dimensions: 850(W) × 1100(D) × 1700(H) ■ Treatment capacity: 200L ■ Treatment time: Approximately 1 hour (varies depending on wastewater) ■ Material: SUS304 (treatment tank), SS400 (frame/control panel) ■ Weight: 210kg *For more details, please download the PDF or feel free to contact us.

• Wastewater/wastewater treatment equipment

This document provides an overview of the treatment flow for the instant wastewater treatment device "Pow SP-200 type." It includes photos of each step from the start of treatment, including raw water injection, SP powder addition, coagulation treatment, sedimentation treatment, discharge of supernatant, filtration of supernatant, discharge of slurry, filtration of slurry, to the completion of treatment. Additionally, there are photos of treatment cases for water-soluble paint wastewater and mold cleaning wastewater. [Contents Included] ■ Water-soluble paint wastewater ■ Mold cleaning wastewater ■ Compost concentrated wastewater ■ Grinding and barrel polishing wastewater ■ Print pigment wastewater ■ Die-casting release agent wastewater *For more details, please download the PDF or feel free to contact us.

• Wastewater/wastewater treatment equipment

This catalog introduces SKS's powerful chains that excel in various fields and applications, from industrial to general use. Featuring lifting chains, sling chains for the steel and shipbuilding industries, and lifting magnet chains, these ultra-strong chains are effective both at sea and on land. A wide variety of other chains, general-purpose chains, and chain slings are also included. Please make use of this for selecting products. [Contents (partial)] ■ Ultra-strong chains ■ Various chains ■ General-purpose chains ■ Chain slings and components ■ For lifting magnets *For more details, please download the PDF or feel free to contact us.

• Chains and sprockets

This catalog introduces chain conveyors that are suitable for transporting various plant equipment. It features a wide range of products, including a water-sealed double chain conveyor that can be filled with water, and a vertical C-type double chain conveyor for ore recovery on belt conveyors. Additionally, we also present the trough cross-sectional structure of SKS chain conveyors and examples of their usage. Please make use of this information for product selection. [Contents (partial)] ■ Various chain conveyors ■ Trough cross-sectional structure of chain conveyors ■ Examples of chain conveyor usage ■ Examples of apron & bucket conveyor usage ■ Examples of SKS standard machines and screw conveyors *For more details, please download the PDF or feel free to contact us.

• Conveyor

The "Chain Wall Method" is a construction technique that integrates and stabilizes embankments by laying chains as reinforcement materials in the ground. It is characterized by the high pull-out resistance of the chains and a structure that withstands the settlement of the embankment. Regarding the reinforcing chain, we have conducted pull-out tests to clarify the reinforcement effects, and leveraging the experience and technical expertise we have cultivated over many years as a manufacturer, we have adopted "chains suitable for reinforced soil." 【Features】 ■ High-strength reinforced soil walls ■ Excellent workability ■ Good cost performance ■ Safety belt compatible *For more details, please download the PDF or feel free to contact us.

• Chains and sprockets

The "SKS Stainless Chain" is an excellent product with high heat resistance, acid resistance, and corrosion resistance, capable of withstanding long-term use. We offer a lineup of industrial stainless chains including "SUS-304 solution heat-treated products," "SUS-316 solution heat-treated products," as well as decorative stainless chains and stainless fittings. Please feel free to contact us when you need assistance. 【Partial Lineup】 ■ Industrial Stainless Chains ・ SUS-304 Solution Heat-Treated Products ・ SUS-316 Solution Heat-Treated Products ■ Decorative Stainless Chains ■ Stainless Fittings ・ CP Couplings *For more details, please download the PDF or feel free to contact us.

• Chains and sprockets

"Kagomaru-kun" is a permanent basket construction using high-durability aluminum alloy coated materials. It does not lose its shape even when lifted by cranes, and filling with crushed stones is easy with an excavator. This construction method was developed with the support of the Ministry of Land, Infrastructure, Transport and Tourism over three years starting from fiscal year 2012, aimed at recovery from slope disasters in mountainous areas and riverbank disasters. 【Features】 ■ It is transported to the site in a stacked state of semi-cylindrical wire mesh, making it compact. ■ Easy to assemble. ■ It does not lose its shape, allowing for mechanized construction of filling with crushed stones. ■ Can be lifted by crane, enabling quick work. ■ Multiple units can be bound together with chains, providing high stability. ■ Excellent long-term durability. *For more details, please download the PDF or feel free to contact us.

• others

We would like to introduce the 'Supermix-G Series' that we handle. We offer the "Supermix HS603G Impeller," which demonstrates high performance in particle uniform dispersion and uniform discharge, along with the special up-and-down stirring device "VMOVE MIXER VM200G Series." Additionally, we have the "GL Dedicated Rotary Stirrer," which addresses the challenges of conventional GL stirrer bodies. 【Product Lineup】 ■Supermix HS603G Impeller ■VMOVE MIXER VM200G Series ■GL Dedicated Rotary Stirrer *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

The "Hybrid Mixing System" is a stirring device suitable for the fields of pharmaceuticals, cosmetics, and fine chemicals. It employs the Super Mix MR series on the low-speed axis, forming an appropriate flow pattern within the tank and demonstrating excellent uniform mixing performance. Additionally, it uses a Super Shear Mixer on the high-speed axis at the bottom of the tank. Thanks to its unique mechanism, it efficiently performs dispersion and emulsification. 【Features】 - Utilizes the pumping action of the Super Shear Mixer, allowing for external circulation and liquid transfer to the next process. - Forms a large circulation flow, efficiently achieving uniform mixing. - Achieves the crushing of lumps and the fine particle size reduction through powerful micronization. - A suitable arrangement that enhances flow without obstructing either flow. *For more details, please download the PDF or feel free to contact us.

• Mixer/agitator

In the "Satake Prefabricated Environmental Testing Laboratory," rigorous environmental tests are conducted on various materials and products across many industries, including electronics, biotechnology, and automotive. Quality checks are performed to ensure satisfaction in functionality, durability, and other aspects. This laboratory creates expected environmental conditions and faithfully and accurately simulates and reproduces them. 【Features】 ■ Control system incorporating electronics ■ Pursuit of energy efficiency ■ Air conditioning system focused on precision ■ Testing laboratory emphasizing practical aspects *For more details, please download the PDF or feel free to contact us.

• Public Testing/Laboratory