藤川伝導機 Product Lineup

We would like to introduce the "Mini Clamp Lever" that we handle. We offer a variety of products, including the all-stainless steel "LDCMS-W-AS" and the stainless steel threaded "LDCMS-W-CR." In addition, we also handle the flat type "LHCM-W" and the practical clamp lever "LUDMS-W." Please feel free to contact us when you need assistance. 【Product Lineup (Excerpt)】 ■LDCMS-W ■LDCMS-W-AS ■LDCMS-W-CR ■LDCMS-W-NI ■LDCM-W ■LDMS-W-AS *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Cyclone Separator Series" is a product that exhibits high drain separation efficiency. By completely eliminating drains and scale, it can supply high-quality dry steam and dry air, improving productivity and product quality. It features continuous discharge, ensuring there is no delay in drain discharge. Additionally, the seal integrity is guaranteed by a high-precision polished float supported at three points. 【Features】 ■ Built-in high-performance cyclone separator ■ Built-in free float trap (excluding DC7) *For more details, please refer to the PDF materials or feel free to contact us.

• Other water treatment equipment

We would like to introduce the "Sensor Bracket" that we handle. It is compatible with major sensor manufacturers' laser, photoelectric, proximity, fiber optic, and photo-micro sensors. You can select from various sensors (part numbers). In addition to mounting brackets, we also support various sensor installations, including sensor stands that combine shafts and joints. 【Lineup (excerpt)】 ■ Single Plate - Bracket for laser sensors - Bracket for photoelectric sensors - Bracket for fiber optic and proximity sensors - Bracket for photo-micro sensors ■ Sensor Stand *For more details, please refer to the PDF materials or feel free to contact us.

• bracket

The "Tsubaki Sprocket Fit Bore" is a processed product with a shaft hole that can be used immediately upon delivery. The processing details are symbolized, allowing for easy ordering with just the model number. Please select the contents for shaft hole processing, keyway processing, and tapped hole processing. Some varieties also support surface treatment. Additionally, we have pre-processed stock items for specific combinations of processing details. Please feel free to contact us when placing an order. 【Features】 ■ Smart: Accurate confirmation and communication of specifications ■ Smooth: No need for drawing creation or attachment during ordering ■ Speedy: Ready for immediate use upon delivery *For more details, please refer to the PDF document or feel free to contact us.

• Processing Jig

This product is a compact gear motor that achieves predictive maintenance by detecting and monitoring fluctuations in load on machinery through its built-in sensors. By using the integrated temperature sensor to correct power calculations during operation, it enables load monitoring according to actual load, which was difficult with retrofitted sensors. It can accurately detect loads in the range of 20Hz to 120Hz. 【Features】 ■ Compatible with inverter drive ■ Supports motors with brakes and 400V class ■ Accurately detects load fluctuations even at low reduction ratios *For more details, please refer to the PDF document or feel free to contact us.

• Other motors

We would like to introduce the "Pre-Roller" that we handle. We offer a lineup of five types of storage methods, including detachable, detachable and vertically foldable, and horizontally foldable. With this product and the rollers of the die lifter installed in the T-slot (U-slot), you can move molds with light force. 【Storage Methods】 ■ Detachable ■ Detachable and vertically foldable ■ Horizontally foldable ■ Detachable (stand-mounted type) ■ Horizontally foldable (stand-mounted type) *For more details, please refer to the PDF document or feel free to contact us.

• roller

This product features a V-shaped groove seal surface on the inner ring, which effectively works against dust on the outer side of the V-groove due to centrifugal force, while preventing grease leakage on the inner side. The shield plate is made of a special steel plate that is resistant to rust and has undergone a robust surface treatment, providing excellent sealing capability. As a result, there are no issues related to rust, which positively impacts the bearing's lifespan and acoustic levels. 【Features】 ■ Outstanding performance with the groove seal surface (all types) ■ Rust-resistant shield plate (ZZ) ■ Double lip seal (LLU) that automatically compensates for gaps *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings

We would like to introduce the "2-Port Solenoid Valve" that we handle. Since the coil can rotate 360°, handling the lead wires is easy. Additionally, the resin stopper reduces metallic noise and improves lifespan. We offer a variety of products, including the direct-acting "JSX Series" and the high flow/energy-saving type "JSX□□U Series." 【Features】 ■ Space-saving ■ Energy-efficient ■ Lead wires can be extracted at 360° ■ Stopper structure ■ Improved corrosion resistance of the iron core ■ Protection structure IP67 *For more details, please refer to the PDF document or feel free to contact us.

• valve

This catalog introduces YUSHIN's "Disc Brake," which we handle. It provides detailed explanations using diagrams and tables regarding usage and safety precautions, usage examples, and calculation formulas for selection. This is a useful reference, so please make sure to utilize it when selecting products. 【Contents (Excerpt)】 ■ What is a Disc Brake ■ Points to Note for Use ■ Safety Precautions ■ Examples of Disc Brake Usage ■ Technical Data, Terminology, Lifespan, Correction Factors ■ Characteristics of Electromagnetic Clutches and Brakes, SI Unit Conversion Table *For more details, please refer to the PDF document or feel free to contact us.

• brake

This catalog introduces the "control panels, alarm panels, and operation panels" that we handle. We offer a variety of products, including fire hydrant pump control panels, alarm panels, and electrode switch panels. In addition, we have a wide range of other products listed, so please take a moment to read through it. 【Featured Products (Excerpt)】 ■ Pump Control Panel (GP) ■ Pump Control Panel (G2) ■ Pump Control Panel (G4) ■ Pump Control Panel (F3) ■ Fire Hydrant Pump Control Panel ■ Star-Delta Starter Panel *For more details, please refer to the PDF document or feel free to contact us.

• Control Panel

This product is a high-precision positioning pin with hydraulic control that expands and contracts in diameter. It has good compatibility with clamps and similar devices, making jig design easy. It can also be used with shallow workpiece holes due to its low-profile design. Additionally, it allows for origin setting and pitch accuracy measurement at the concentric part of the flange's upper surface. 【Features】 ■ Compact body for easy placement ■ Easy inspection of mounting position accuracy ■ Usable with shallow workpiece holes *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This catalog introduces shaft brackets that are suitable for mounting and securing components around the shaft. For round shafts and square shafts, we offer normal types, types with four holes, types with two screw holes, and types with flanges. They are convenient for sensor installation during machine assembly, modifications, and maintenance. 【Contents (partial)】 ■ For round shafts - Normal type - Type with four holes - Type with two screw holes - Type with flange *For more details, please refer to the PDF document or feel free to contact us.

• bracket

This catalog introduces the cross-axis gear products handled by Fujikawa Transmission Co., Ltd. It includes methods for selecting spiral gears and worm gears, as well as precautions for selection, additional processing, and usage. Additionally, it presents product specifications such as material, tooth shape, and accuracy for each product. Please make use of this information for your product selection. 【Contents (partial)】 ■ Product symbols for cross-axis gear products ■ Method for selecting spiral gears (for reduction or constant speed) ■ Method for selecting worm gears ■ Documentation for cross-axis gear products ■ Spiral gear IS *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce the magnet LED light stand 'CME-LED1A' handled by Fujikawa Denko Co., Ltd. The total luminous flux is approximately 500lm, the power supply voltage is AC100V, and the power consumption is 5.3W. The magnetic base adhesion force is 784N (80kgf). The weight is approximately 1.3kg. It is lighter in weight, making it suitable for lighting around machinery and inspection work. Please feel free to consult us when you need assistance. 【Features】 ■ Waterproof head adopted ■ Bright LED lighting ■ Lighter weight ■ ON/OFF magnetic fixation *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting

The "TSL…M" is a lightweight, long-stroke positioning table made up of a slide table and bed constructed from high-strength aluminum alloy. By incorporating two sets of linear ways in parallel and combining them with precision ball screws, it achieves high travel accuracy and precise positioning. The table width is available in four sizes ranging from 90mm to 220mm. The XY bracket also makes multi-axis configurations easy. 【Features】 ■ Lightweight and long-stroke positioning table ■ Stable high travel accuracy and positioning precision ■ Multi-axis system configuration possible with XY bracket *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

"QKQ・QKA/QKB・QHS" are high-performance vibration isolation materials made of silicone by a manufacturer specializing in vibration-damping rubber. The lineup includes "QKQ," which is designed for ultra-low loads, "QKA/QKB," which features a simple structure and easy installation, and "QHS," which can be used in four segments. These materials are ideal for vibration control in small precision devices in the medical and semiconductor fields, where precision is required. 【Features】 ■ Softly absorbs loads, providing vibration isolation effects even for lightweight equipment ■ Has damping effects, quickly reducing vibrations ■ Usable under a wide range of temperature conditions from -30°C to 150°C ■ Excellent chemical resistance and durability ■ Uses stainless steel for fittings, making it versatile for various applications *For more details, please refer to the PDF document or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices

This catalog introduces the cubicles and high-voltage equipment handled by Fujikawa Denko Co., Ltd. It includes a wealth of information on the basic structure of cubicles, external box structure, certified cubicles, recommended cubicles, and type introductions. Kawamura cubicles are suitable high-voltage receiving equipment for customers with small power and commercial power needs, with a contracted power of 50kW or more, including buildings and factories. [Contents (partial)] ■ Basic structure ■ Introduction of cubicle types ■ Electrical equipment design support services ■ Frame-type high-voltage receiving and transforming equipment for electrical rooms ■ Smart cubicle selection procedure *For more details, please refer to the PDF document or feel free to contact us.

• Power Monitoring Equipment

The "VFP" is a high-precision positioning cylinder for positioning large diameter holes. It comes in four sizes tailored to the target workpiece hole diameter. With an optional air sensor, the release operation can be confirmed. The pin moves significantly, allowing for a large clearance during contraction, which enhances the workpiece's attachability and detachability. 【Target Workpiece Hole Diameter (mm)】 ■φ60～φ65 ■φ80～φ86 ■φ100～φ107 ■φ120～φ129 *For more details, please refer to the PDF document or feel free to contact us.

• cylinder

The "TKA type" has obtained IP54 certification (only TKA55) and is a cable carrier that reliably protects internal cables from dust, chips, and spatter. The noise level during bending operations is reduced by up to approximately 20% compared to the TKC type. The bracket also comes with a cover, minimizing the opening as much as possible. During maintenance, the arm can be easily opened and closed from any position. 【Features】 ■ Sealed structure that protects cables even in harsh environments ■ Various mechanisms that reduce maintenance time ■ Damper structure achieves low noise ■ 322 lineup that fits various equipment *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

This catalog introduces the "Lossnay for Equipment" handled by Fujikawa Conductive Machinery Co., Ltd. It features various models including the floor-mounted type (LF type), which minimizes the required installation area through the integration of supply and exhaust ducts and enhances renewal performance through multi-segment capability, as well as the floor-mounted built-in type (LB type) and the floor-mounted built-in type for machine room installation (LPB type). Please make use of this for product selection. 【Contents (partial)】 ■ Model name system table ■ Lineup of Lossnay for Equipment (fan-integrated type only) ■ Floor-mounted type ■ Floor-mounted system components ■ Floor-mounted built-in type with humidification ■ Outside air processing unit (floor-mounted built-in type with heating and humidification direct expansion type) *For more details, please refer to the PDF materials or feel free to contact us.

• Ventilation and Exhaust
• air conditioning

The "Polylube Needle Bearing" is a product that prevents grease scattering, improves lubrication life, and reduces grease maintenance through the use of thermosetting grease encapsulation. When Polylube is encapsulated in the bearing, the lubricant seeps out and acts as a micro-lubrication mechanism. It is difficult for the lubricant to leak, and it achieves stable lubrication over a long period. 【Features】 ■ Prevents grease scattering ■ Improves lubrication life ■ Reduces grease maintenance ■ Grease does not flow out even if moisture enters *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Plastic bearings

The "IBV Series" is an impact blow valve that significantly reduces CO2/air consumption and working time with instantaneous air blow. The peak pressure is more than 2 to 3 times higher, CO2 air consumption is reduced by 93%, and working time is also reduced by 97%. It features a compact design utilizing piping as a tankless structure, and the peak pressure can be adjusted based on the primary side piping conditions. [Weight] ■100g (with solenoid valve / L-shaped plug connector) ■110g (with solenoid valve / M8 connector) ■75g (air-operated type) *For more details, please refer to the PDF materials or feel free to contact us.

• valve

We would like to introduce the lifespan-enhancing cylinder 'CQS-XB24' handled by Fujikawa Denko Co., Ltd. Thanks to new technology, durability has increased by more than four times, and maintenance frequency has been reduced. The specifications and external dimensions are the same as the existing products (thin cylinders/compact type CQS Series). 【Specifications (partial)】 ■ Operating method: Double-acting rod ■ Fluid used: Air ■ Lubrication: Not required (oil-free) ■ Guaranteed pressure resistance: 1.5MPa ■ Maximum operating pressure: 1.0MPa *For more details, please refer to the PDF document or feel free to contact us.

• cylinder

The "JMB Series" is an air cylinder that can reduce air consumption by up to 29% with low air usage and appropriate size selection. We have added a double-side tapped mounting support type. This reduces the protrusion from the end face of the tie rod and shortens the overall length. With the unadjusted air cushion method, there is no need for air cushion adjustment, and the built-in rubber cushion reduces metallic noise when the piston stops. 【Specifications (partial)】 ■ Operating method: Double-acting rod ■ Fluid used: Air ■ Guaranteed pressure resistance: 1.0MPa ■ Maximum operating pressure: 0.7MPa ■ Minimum operating pressure: 0.05MPa *For more details, please refer to the PDF document or feel free to contact us.

• cylinder

We would like to introduce the "High-Quality Deep Groove Ball Bearings for Motors" handled by Fujikawa Denko Co., Ltd. It reduces sound pressure in the frequency range (1,000Hz to 5,000Hz) that people find particularly unpleasant. It is suitable for use in household appliance motors, industrial motors, and other machinery used indoors or near people. 【Bearing Series】 ■60 ■62 ■63 ■69 *For more details, please refer to the PDF document or feel free to contact us.

• Metal bearings
• Plastic bearings

The "Model GBB" is a versatile clamp that does not require a U-cut for the mold. When hydraulic pressure is supplied, the piston rises, and the clamp lever rotates around the pin to lock the mold. When the hydraulic pressure is released, the clamp lever is released by the force of the return spring, and the piston descends, entering the release state. The GBB clamp can then slide within the T-slot. 【System Configuration Example】 ■ Upper Mold Clamp: GBB Clamp ■ Lower Mold Clamp: GBB Clamp ■ Mold In/Out: MR□ Pre-Roller + RA Die Lifter ■ Hydraulic Source: CP□ Unit / CQ□ Unit *For more details, please refer to the PDF materials or feel free to contact us.

• Vice Clamps

The "Model MV" is a compact air valve unit that controls the air cylinder of an automatic slide clamp, achieving full automation. It features a directional control valve that switches the direction of air through electric control. It controls the air supplied to the air cylinder, allowing for the automatic sliding of GKE/GKF clamps. 【Lineup】 ■MV3013 ■MV3023 ■MV3033 *For more details, please refer to the PDF document or feel free to contact us.

• valve

The "iTrapSensor iT5 Series" is a sensor that simultaneously measures surface temperature and ultrasonic waves, or temperature and pressure, and transmits the data to monitoring systems. By continuously monitoring the numerous valves, pipes, and equipment scattered throughout the factory, it can detect abnormalities early and improve the reliability of the equipment. Additionally, for equipment installed in hard-to-inspect locations such as high places, pits, and high-temperature environments, it can reduce the burden of on-site patrols. 【Features】 - Transmits measurement information of surface temperature and ultrasonic waves, or temperature and pressure via wireless or wired communication - Supports operation determination of steam traps - Intrinsically safe explosion-proof specification - Achieves long-term operation (approximately 10 years) - Easy to attach and detach with dedicated fixtures - Data can be collected, stored, and viewed *For more details, please refer to the PDF materials or feel free to contact us.

• Thermometer
• Pressure

This catalog introduces the "Clamp Lever" handled by Fujikawa Denko Co., Ltd. It features the mini clamp levers with a long hole washer integrated type, "LDCM-LWP" and "LDCMS-LWP," the all-stainless steel version "LDCMS-LWP-AS," and the clamp levers with a long hole washer integrated type "LDM-LWP/LDMS-LWP," among others. Please make use of this for selecting products. 【Contents Listed (Partial)】 ■LDCM-LWP ■LDCMS-LWP ■LDCMS-LWP-AS ■LDCMS-LWP-CR ■LDCMS-LWP-NI *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

We would like to introduce our "Small Regulator Bracket." It is compatible with major small regulators and can accommodate up to three units. We offer a total of seven different shapes, including straight and L-shaped, allowing for installation in various locations of your equipment. Please feel free to contact us if you have any requests. 【Features】 - Compatible with major small regulators - Can install up to three regulators - Available in seven different shapes, including straight and L-shaped - Can be installed in various locations of your equipment *For more details, please download the PDF or feel free to contact us.

• bracket

We would like to introduce our product, "AAG/Aluminum Alloy Plate." Among aluminum alloys, it has moderate strength and is a representative alloy used for tools, machine parts, and more. Its corrosion resistance and thermal conductivity are superior to those of steel. Additionally, as an Al-Mg series alloy, it has excellent weldability, and its specific gravity is about one-third that of steel, making it easy to handle. 【Features】 ■ Has moderate strength among aluminum alloys ■ Used for tools, machine parts, etc. ■ Superior corrosion resistance and thermal conductivity compared to steel ■ Excellent weldability due to being an Al-Mg series alloy *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "CME-EC350WPR" is a rechargeable waterproof LED light that can be operated remotely with a remote control, allowing for operation from a distance. The charging port is protected with a cap to enhance dust resistance and durability. It comes with a magnetic holder, enabling the main light to be securely attached to magnetic surfaces. Additionally, we also offer the "CME-EC450WPR," which has a brightness of 450 lumens. Please feel free to contact us if you have any requests. 【Features】 ■ Highest level of dust and waterproof performance for underwater lighting ■ Can be operated remotely with a remote control ■ The separate magnetic holder allows the main light to be securely attached ■ Rechargeable battery that can be used repeatedly ■ USB output of 2.1A, capable of charging smartphones and tablets *For more details, please download the PDF or feel free to contact us.

• LED lighting

The "TZ" is a compact and high-precision lift table that employs a unique wedge mechanism for vertical positioning. It comes in two types: a high-precision, high-rigidity type that incorporates roller-type linear guide equipment, and a standard type that offers excellent cost performance, with table dimensions of 120mm and 200mm available. Two types of wedge reduction ratios are provided, allowing for vertical positioning with a maximum stroke of 24mm. 【Features】 ■ Compact precision lift table ■ Two types and two sizes to choose from based on application ■ Higher-level positioning achievable with the installation of a linear encoder ■ Standard equipped with sensors ■ Usable as a Z-axis in multi-axis configurations *For more details, please download the PDF or feel free to contact us.

• Other work tools

This catalog introduces the control equipment for pneumatic circuits handled by Konan Electric Co., Ltd. From general-purpose types that emphasize basic performance to specialized types segmented by industry and application, we have a confident lineup that accurately captures the ever-increasing needs for automation and labor-saving. Please make use of this when selecting products. [Contents] ■ Conditioning equipment ■ Directional control valves ■ Auxiliary equipment for instrumentation ■ Flow control valves ■ Others *For more details, please download the PDF or feel free to contact us.

• Other process controls

This catalog introduces the vacuum equipment for automated transport handled by our company, Schmalz GmbH. With high functionality and excellent cost-effectiveness, it contributes to the optimization of devices and manufacturing processes. It includes vacuum pads and mounting components, as well as vacuum generators, valves, and system monitoring. Please make use of this information when selecting products. [Contents (partial)] ■ Industry sectors / Featured products ■ Vacuum pads ■ Mounting components for vacuum pads ■ Vacuum generators ■ Valves *For more details, please download the PDF or feel free to contact us.

• Vacuum Equipment

The "WHA" is an air swing clamp that achieves high speed with three lead grooves and an outer race. It features high speed, high rigidity, and a swing completion position repeatability accuracy of ±0.5°. Due to the high repeatability accuracy (±0.5°) at the swing completion position, it clamps securely even at small clamp points. The outer race rotates in accordance with the rotation of the rod and steel balls, minimizing resistance during turning to the utmost limit. Additionally, we offer the air speed control valve "BZW" and manifold blocks, so please feel free to contact us if you have any requests. 【Features】 ■ Ball-type swing mechanism with an outer race ■ High precision swing completion position repeatability accuracy *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

The "ROBOTRAX TKRB14H10" is a mini-sized cable carrier that is suitable for protecting cables in small industrial robots. While downsizing, it maintains the basic performance such as cable protection effectiveness and customer-friendly design. It adds peace of mind by avoiding the risk of equipment stoppage due to cable breakage in areas where conventional products were too large to install. 【Features】 ■ High strength with wire ■ Easy to handle ■ High cable protection performance *For more details, please download the PDF or feel free to contact us.

• Other cable related products

This catalog introduces the industrial blower system components handled by our company. We offer a wide range of speed controllers that achieve appropriate ventilation under various conditions. It also includes control switches, control system components, and inverter fans. Please take a moment to read through it. 【Contents】 ■ Control Switches ■ Control System Components ■ Inverter Fans ■ Speed Controllers *For more details, please download the PDF or feel free to contact us.

• Other air conditioning equipment

This catalog introduces the "NTN miniature and small diameter ball bearings" that we handle. It includes characteristics of sealed and shielded bearings, as well as a dimensional table for radial ball bearings. Additionally, there are technical explanations regarding bearing materials, precision, rated load and lifespan, and fits. We encourage you to read it. 【Contents (partial)】 ■ Characteristics of sealed and shielded bearings ■ Representation of basic numbers and auxiliary symbols ■ Dimensional table index ■ Dimensional table for radial ball bearings: metric system ■ Dimensional table for radial ball bearings: inch system *For more details, please download the PDF or feel free to contact us.

• Metal bearings

The "CRP Series" is a compact compressor designed to serve as an air source and vacuum source for collaborative robot grippers. It can be used as either a positive pressure or vacuum pressure (vacuum pump) with a single unit, and the noise level when equipped with the silencer "ANB1-01" is below 55dB. It can achieve a gripping force of 60cpm at 0.3MPa, and it features an alarm function that lights up or blinks in case of an abnormal situation. 【Features】 ■ Can be used as either a positive pressure or vacuum pressure (vacuum pump) with a single unit ■ Oil-free ■ Noise: below 55dB ■ Maximum air discharge volume of 10L/min (ANR) ■ Reaches a vacuum pressure of -70kPa in 0.2 seconds *For more details, please download the PDF or feel free to contact us.

• Other machine tools

We would like to introduce the dual rod cylinder "CXS2 Series" that we handle. The mounting dimensions are compatible with the existing CXS series, with a permissible kinetic energy of 0.016J and a maximum piston speed of 800mm/s. The maximum standard stroke has been expanded. The inner diameter of the tube has been increased to 16mm, while the outer dimensions remain the same at ø15, resulting in an approximately 14% increase in thrust. Additionally, a maximum stroke adjustment of -5mm is possible. 【Features】 ■ Permissible kinetic energy: 0.016J ■ Maximum piston speed: 800mm/s ■ Expanded maximum standard stroke ■ Double pistons for double thrust ■ Dual rods for non-rotation accuracy of ±0.1° *For more details, please download the PDF or feel free to contact us.

• cylinder

The HRS400 Series is a standard type of thermochiller. It is air-cooled and has a cooling capacity of 38 kW, with a set temperature range of 5 to 35°C. The maximum ambient temperature for use is 45°C, and the temperature stability is ±0.1°C, with a waterproof structure rated IPX4. Additionally, the adoption of a touch panel has improved the product's settings, operation, and visibility. 【Specifications (partial)】 ■ Cooling capacity: 38 kW ■ Power supply ・3-phase 380–415V (50Hz/60Hz) ・3-phase 460–480V (60Hz) ■ Set temperature range: 5–35°C ■ Maximum ambient temperature for use: 45°C *For more details, please download the PDF or feel free to contact us.

• Chiller

The "iQ Monozukuri Process Remote Monitoring" is an application package that easily enables the IoT transformation of production sites, allowing for the collection, visualization, and centralized management of information from multiple devices. Through the on-site GOT, it displays the operational status of the production site, as well as operation logs and alarm information for each device on the GT SoftGOT2000. By analyzing this data, it supports overall process improvement and productivity enhancement in the production environment. 【Features】 ■ Easily build systems by integrating with existing equipment ■ Analyze equipment status using the included template screens ■ Centrally manage information that was previously managed individually ■ Remote monitoring is also easy with a mobile app *For more details, please download the PDF or feel free to contact us.

• Other security and surveillance systems

The "GBP" is a block-fixed type clamp that does not require a T-groove. When hydraulic pressure is supplied, the piston rises, and the clamp lever rotates around the pin to lock the mold. When the hydraulic pressure is released, the clamp lever is released by the force of the lever return spring, and the piston descends, resulting in a release state. 【Features】 ■ Easy to install on existing press machines due to bolt fixation ■ Manufactured to match the thickness of the clamping part of the mold you will be using *For more details, please download the PDF or feel free to contact us.

• Vice Clamps

We would like to introduce our "Die Casting Mold Cylinder Series." Our lineup includes the high-power core push cylinder "PCE," which features a built-in mechanical lock mechanism, and the high-speed core pull cylinder "PCB," which can replace conventional core cylinders. Additionally, we offer the high-power core pull cylinders "PCA/PCC," which contribute to the miniaturization of molds, and the small-sized high-speed core pull cylinder "PCM." Please feel free to contact us if you have any inquiries. 【Features】 ■ High-power core push cylinder "PCE": Push ■ High-speed core pull cylinder "PCB": Pull ■ Small-sized high-speed core pull cylinder "PCM": Pull ■ High-power core pull cylinder "PCA": Pull ■ High-power core pull cylinder "PCC": Pull *For more details, please download the PDF or feel free to contact us.

• cylinder