藤川伝導機 Product Lineup

The "AR Series Vacuum Type" is a hybrid control system that significantly reduces motor heat generation through increased efficiency. It can be used in a vacuum environment of 10^-5 Pa, allowing for positioning operations within vacuum environment devices. Additionally, by not using a rotary introducer, it contributes to the compactness of the equipment. Furthermore, it monitors the rotational speed and amount of the motor within the vacuum chamber and is equipped with various alarm output functions. 【Features】 ■ Compatible with vacuum environments (10^-5 Pa) ■ High reliability through closed-loop control ■ Reduced heat generation due to increased efficiency ■ Current control mode ■ CE marking *For more details, please refer to the PDF materials or feel free to contact us.

• Instrumentation and Control Systems

The "AZ Series" is equipped with ABZO sensors, enabling the construction of a battery-less absolute system, and the drive system uses αSTEP products. Due to the absolute method, external sensors are unnecessary, reducing wiring, and since it is battery-less, there is no need for battery management, allowing for maintenance reduction. Additionally, motors are available in standard types, as well as TS geared types and PS geared types, and drivers are offered in network-compatible types and types with built-in positioning functions. 【Features】 - Development of a compact, low-cost, battery-less mechanical absolute sensor - Contributes to increased productivity and cost reduction - No need for origin sensors or limit sensors due to the absolute system - Realization of an absolute system without batteries - Hybrid control enables easier and more reliable control *For more details, please refer to the PDF materials or feel free to contact us.

• Other motors

This catalog introduces various types of hoists and crane-related equipment. It includes the "US・HUS series" ranging from 5t to 60t, the "S2 series" for high frequency use (1/2t to 60t), and the "U2・HU2 series" which achieves miniaturization and high functionality. Additionally, it features a model selection table, basic terminology for hoists (cranes), guidance on how to read the catalog, and a list of manufactured models, providing useful information for those considering implementation. [Contents (partial)] ■ Mitsubishi hoist model selection table ■ Basic terminology for hoists (cranes) ■ Model selection ■ List of manufactured models ■ Special hoist case studies *For more details, please refer to the PDF materials or feel free to contact us.

• crane

We would like to introduce our "CKA Series" of conductive vibration-damping rubber that we handle. This simple round vibration-damping rubber uses highly conductive rubber, allowing static electricity to be dissipated while providing vibration damping. Additionally, we offer six different sizes. Please feel free to contact us if you have any inquiries. 【Lineup】 ■CKA-15 ■CKA-20 ■CKA-20-20H ■CKA-25 ■CKA-30 ■CKA-40 *For more details, please refer to the PDF document or feel free to contact us.

• Rubber

"Sunlight Coating" is a photocatalytic processing technology that can be applied widely, from building materials to fibers. The main components are titanium oxide and apatite. For indoor use, we offer interior paint "Sunlight Photocoat TYA-10GW" and multifunctional "Sunlight Tiocoat TTC-40HL." Additionally, there is "Sunlight Tiocoat TTC-40GA," which can be used outdoors. It can also bond organic substrates at room temperature, making on-site work easy. [Features] ■ Powerful antibacterial properties ■ Decomposes unpleasant odors ■ Environmental purification ■ Stain resistance *For more details, please refer to the PDF document or feel free to contact us.

• paint

The "Space Disinfection Service" is a suitable service for escalator handrails, elevators, doors, switches, computers, desks, and more. The process for preventing infections and disinfecting after an outbreak consists of four steps. The finishing after disinfection can also include a processing technique called "Sunlight Photocatalytic Coating," which utilizes natural purification effects that begin to work when exposed to light. 【Benefits】 ■ Thorough disinfection of high-frequency contact surfaces ■ Space spraying disinfection using alcohol ■ Prevention of secondary infections *For more details, please refer to the PDF document or feel free to contact us.

• Disinfecting and antibacterial products

We would like to introduce the "αSTEP AZ Series Multi-Axis Driver" that we handle. This is a multi-axis driver that can connect to motors with DC power input from the AZ series and the electric actuators that are equipped with them. We have products that support SSCNET III/H, MECHATROLINK-III, and EtherCAT. 【Applicable Series (Partial)】 ■ Motors ・αSTEP AZ Series DC Power Input ■ Electric Actuators ・Electric Slider EAS Series DC Power Input equipped with AZ Series ・Electric Slider EZS Series DC Power Input equipped with AZ Series ・Electric Cylinder EAC Series DC Power Input equipped with AZ Series *For more details, please download the PDF or feel free to contact us.

• DC Motor

This document is the catalog for the "αSTEP AR Series." It includes the system configurations, types, and prices for both AC power input and DC power input types, as well as dimensional drawings, connections and operation, and common specifications. The "AR Series" features a unique control that hybridizes the advantages of "open-loop control" and "closed-loop control," equipped with a rotor position detection sensor (resolver) based on the stepping motor "αSTEP." [Contents] ■ αSTEP AR Series ■ αSTEP AR Series AC Power Input ■ αSTEP AR Series DC Power Input ■ Common Specifications ■ αSTEP AR Series Vacuum Type Pulse Input Type ■ Cables and Peripheral Devices *For more details, please download the PDF or feel free to contact us.

• DC Motor
• AC Motor

We would like to introduce the "αSTEP AR Series FR Geared Type" that we handle. The thin hollow shaft structure achieves space-saving and high allowable torque and radial load, contributing to the compactness of the equipment. Since the output shaft is hollow, it can be connected directly to the customer's drive shaft without coupling or other connecting components. Additionally, by reducing the number of parts required for shaft connection, it contributes to cost reduction of components and assembly time. 【Features】 - Achieves space-saving by direct connection to the drive shaft - Allows for accurate positioning even without external sensors - High allowable radial load enables direct connection of the axle to the gear - Can be compactly stored by placing two units side by side *For more details, please download the PDF or feel free to contact us.

• Other motors

We would like to introduce the "αSTEP AZ Series mini driver" that we handle. The αSTEP AZ Series now offers the option of a mini driver. It supports battery operation, allowing for a wider range of applications than ever before. No external sensors or related wiring are required at all. The elimination of external sensors and wiring contributes to the miniaturization and lightweight design of the device. Additionally, it reduces the time required for wiring work. 【Features】 ■ Compact design that fits into narrow spaces ■ Minimal installation space required ■ Lightweight design that reduces the burden on the device ■ Decreases the total mass of the device, reducing power consumption of the wheel drive axis ■ Visualization of power supply voltage ■ Avoids mid-operation stops due to low battery levels *For more details, please download the PDF or feel free to contact us.

• Other motors

This document is the catalog for the "αSTEP AZ Series Connector Type." It includes features of the series, as well as system configurations, types, prices, specifications, characteristics, and dimensional drawings for both AC power input connector types and DC power input connector types. This product consolidates power lines, signal lines, electromagnetic brake lines, and ground lines into a single cable, allowing for efficient wiring work. [Contents] ■ αSTEP AZ Series Connector Type ■ αSTEP AZ Series AC Power Input Connector Type ■ αSTEP AZ Series DC Power Input Connector Type ■ Cable *For more details, please download the PDF or feel free to contact us.

• Other Connectors

We would like to introduce the "αSTEP AZ Series Orthogonal Axis FC Geared Type" that we handle. The orthogonal axis FC geared type can reduce the protrusion of the motor. We offer three types of gear reduction ratios, allowing you to choose according to your application. Leveraging the features of the geared type, it has high strength and a large allowable radial load. 【Features】 ■ Compact and space-saving ■ Compatible with a wide range of torque ■ High strength ■ High safety factor against belt tension with belt and pulley mechanism ■ Easy tension adjustment *For more details, please download the PDF or feel free to contact us.

• Other motors

The "NX Series" is a servo motor that enables high-precision control with simple operation. It can drive large inertia loads and belt mechanisms stably without the need for gain adjustment, similar to a stepping motor. Additionally, if gain adjustment is performed manually, operation under more demanding load conditions becomes possible. 【Features】 ■ Easy operation ■ Achieves large inertia drive ■ Enables smooth operation with belt mechanisms ■ Simple operation ■ Easy setup and monitoring *For more details, please download the PDF or feel free to contact us.

• Other motors

The "AZX Series" is a servo motor equipped with a battery-less absolute sensor. It is suitable for positioning applications that require a large amount of movement, as it delivers high torque in high-speed ranges. The driver supports EtherCAT, EtherNet/IP, and PROFINET. It allows for a single communication cable to connect the upper control device and the driver, achieving reduced wiring. 【Features】 ■ No external sensor required ■ Battery-less ■ Network-compatible driver ■ Simplifies the main program with sequencing functions ■ Delivers high torque in high-speed ranges ■ Basic operation method is the same as the AZ series *For more details, please download the PDF or feel free to contact us.

• Other motors

This catalog introduces the 5-phase stepping motor 'RKII Series'. It provides a detailed explanation of the performance and features that reduce the total cost of the equipment, simplify wiring and selection, and enhance reliability, along with the product lineup. Compared to previous products, we have significantly improved the performance of the motor, the usability of the driver, and various functions, all while lowering the price. [Contents (partial)] ■ Reduces the total cost of the equipment ■ Easy wiring and selection ■ Built-in positioning function type is FLEX compatible ■ Performance and features that enhance the reliability of the equipment ■ Product lineup *For more details, please download the PDF or feel free to contact us.

• Other motors

We would like to introduce our stepping motor "PKP series" and the stepping motor driver "CVD series SC type." With a simple configuration of the motor and driver, speed control is possible. It allows for easy control by selecting two types of speeds and simply turning the start input ON/OFF. This stepping motor operates at low speeds with high torque, making it usable without a gearhead. It enables downsizing of the motor and miniaturization of equipment. 【Features】 ■ No pulse oscillator required ■ Two speed settings available ■ Compact, high-torque motor ■ Improved reproducibility of stop positions ■ Maintains torque even when stopped *For more details, please download the PDF or feel free to contact us.

• Other motors

The "CVD Series" is a driver for 4-axis open-loop stepping motors that supports EtherCAT communication. In addition to being compatible with both 2-phase and 5-phase motors, it also features encoder input capabilities, allowing for the detection of loss of steps and monitoring of position and speed. Wiring for input and output signals can be connected with a single EtherCAT communication cable. Furthermore, communication lines and power lines for four axes are consolidated into one driver. 【Features】 ■ A single driver allows for the free selection of 2-phase or 5-phase motors. ■ Easy differentiation of motors according to specification changes or applications. ■ No need for a brake control circuit since it can be controlled from the driver. ■ External power supply is eliminated as it can be supplied from the driver, reducing wiring. ■ Equipped with the capability to incorporate encoder information into the driver. ■ Reduces the burden on higher-level devices and simplifies the overall system configuration of the equipment. *For more details, please download the PDF or feel free to contact us.

• Other motors

The "BLE Series" is a brushless motor compatible with the CC-Link field network system, achieving reduced wiring for the system and real-time monitoring. The speed variation rate (against load) is ±0.2%. Even when the load conditions change, it can drive stably from low to high speeds. By allowing direct connection of the drive shaft without using a coupling, it enables space-saving for the equipment. 【Features】 ■ Speed control range: 80 to 4000 r/min (speed ratio 1:50) ■ Excellent speed stability ■ Gearhead rated lifespan: 10,000 hours ■ Space-saving achieved with a hollow shaft flat gearhead ■ Energy-efficient ■ Slim and high power *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

The "BLV Series" is a compact, high-output brushless motor suitable for speed control. It uses permanent magnets in the rotor section, making it slim and high-powered. With a motor length of just 82mm, it delivers a maximum output of 400W. Thanks to its high permissible radial load, it enables powerful and high-spec operation. It is also suitable for transportation under heavy loads. 【Features】 - Compact and high-output, contributing to the miniaturization of equipment - Wide speed control range and excellent speed stability - Compatible with battery-powered operation - Electromagnetic brake for load holding and vertical drive when stationary - Reliable startup and maintenance with support software MEXE02 - Modbus (RTU) and FA network control are also possible *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

The "BXII Series" is a brushless motor that achieves an affordable price while enhancing functionality and performance. With speed control, position control, vertical drive, and torque limitation, it truly excels as a servo motor. You can set up to 16 points of operational data such as movement amount and operating speed in the driver. A positioning unit is not required for switching operational commands or data. 【Features】 ■ Rotation speed range: 2 to 4000 r/min ■ Speed variation rate: ±0.05% ■ Built-in positioning function in the driver ■ 16 points of operational data ■ Supports vertical drive ■ Output torque limitation is possible *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

The "BMU Series" is a brushless motor that features an easy-to-use speed control setting dial. Once the motor is connected to the driver, all you need to do is turn on the switch for simple wiring. The motor uses a new brushless design that is compact, high-output, and highly efficient. It achieves a maximum speed of 4000 r/min with a speed ratio of 1:50 (80–4000 r/min). The speed variation rate has also significantly improved from the conventional ±0.5% to ±0.2%. 【Features】 ■ Easy speed control with a simple dial ■ Simple wiring by just connecting the motor to the driver and turning on the switch ■ Compact, high-output, and highly efficient brushless motor ■ Available in cable type and connector type ■ Offering top-level speed control at an affordable price *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

The "BLE2 Series" is a brushless motor that offers a variety of lineups, including models with electromagnetic brakes and dustproof/waterproof specifications. It features an operation panel on the front. While viewing the digital display, you can use the operation keys and setting dial to configure operating data and parameters. Additionally, by optimally arranging the internal components of the driver, it achieves a compact and slim design. Multiple units can be mounted closely together, allowing for reduced installation space and the ability to increase the number of axes in the same area. 【Features】 ■ Comprehensive performance and functionality ■ Motors that can be selected according to application ■ Focus on ease of use ■ High torque support with selectable gearheads *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

The "BLH Series" is a brushless motor that can be selected according to the operating environment. It offers various types suited for different environments, including connector types with selectable cable lengths and motors with an IP65 protection rating. For applications requiring holding during horizontal drive, motors with electromagnetic brakes are available. Additionally, the use of permanent magnets in the rotor contributes to a slim, lightweight, and high-power design, aiding in downsizing equipment. 【Features】 ■ Wide speed control range ■ Stable speed control ■ Slim, lightweight, and high power *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

The "BLE Series" is a brushless motor equipped with standard functions necessary for speed control. Through feedback control, it achieves a wide speed control range of 100 to 4000 r/min (speed ratio 1:40). Additionally, when used in combination with the data setter "OPX-2A" or the support software "MEXE02," its performance and functionality are enhanced. Furthermore, the speed variation rate (against load) is ±0.5%. Even when the load conditions change, it can drive stably at speeds ranging from low to high. 【Features】 ■ Speed control range: 100 to 4000 r/min (speed ratio 1:40) ■ Energy-saving ■ Slim and high power ■ Excellent speed stability ■ Capable of speed control during upward and downward driving *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

The "IP-compatible connection cable" is a connection cable that connects the brushless motor "BMU series/BLE2 series" with the driver. It connects the power line and signal line with a single connector. This eliminates cable branching at the relay section and exposure of lead wires, ensuring dust and water resistance. Additionally, there are two types of connection cables available for the driver side: standard connector type and panel connector type. The panel mount type is suitable for panel installation. 【Features】 ■ Uses IP66/IP67 compliant relay connectors ■ Noise-resistant structure ■ Convenient panel mount type for panel installation *For more details, please download the PDF or feel free to contact us.

• cable

The "BLV Series R Type" is a brushless motor that pursues high output and compact size. Both the motor and driver have achieved significant miniaturization and weight reduction. The driver is approximately 80% more compact compared to conventional products, making it suitable for limited spaces within devices. Additionally, it can drive larger inertia loads compared to conventional products, enabling the transportation of heavy objects and contributing to compact and high-power device design. 【Features】 ■ Contributes to compact design of devices with small size, lightweight, and high power ■ Smooth operation, current position acquisition, and positioning operation are possible ■ Expanded operating voltage range makes battery power sources more user-friendly ■ Compatible with Modbus (RTU) and CANopen communication ■ Support software MEXE02 assists with startup, operation, and maintenance ■ Sequence function simplifies the main program *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

The "BLS Series" is an eco-friendly motor that fulfills the desire for a more compact and simpler usability. With a DC24V input brushless motor and a small driver, it reduces component costs, occupied space, and wiring efforts within the control panel. Additionally, it can use the same gear head as AC motors, making it easy to change motors without altering the equipment. 【Features】 ■ More cost reduction ■ More compact ■ More simplicity ■ More reliability *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

We would like to introduce our "worm gear head." Despite being compact and low-profile, it allows for approximately three times the permissible torque compared to parallel axis gear heads. It is recommended for applications that require high torque at low speeds or when you want to miniaturize (lower the height) the mechanism. Additionally, it can be directly connected to the drive shaft through a hollow shaft, allowing for a reduction in components such as couplings and belt pulleys. 【Features】 ■ Applicable motor: Brushless motor parallel axis gear head 30W ■ Permissible torque is about three times that of parallel axis gear heads ■ Self-locking for load retention applications that require prevention of falling due to its own weight ■ Space-saving with orthogonal axis/hollow shaft *For more details, please download the PDF or feel free to contact us.

• Other machine elements

Our company offers solution proposals for transport robots. Efforts toward the automation and labor-saving of relatively simple "material handling tasks" are accelerating, and the introduction of transport robots (AGV/AMR/GTP) is being promoted as a solution. The brushless motors "BLV Series R Type/BLH Series" can be battery-powered, making them suitable for use in the axles of transport robots and the transport devices mounted on them, contributing to the support of various driving patterns and transported items required in different environments. 【Features】 ■ Low-profile, slim design ■ High load-bearing capacity ■ Setting and fine-tuning of stop positions ■ Straight driving, avoidance, and stopping *For more details, please download the PDF or feel free to contact us.

• Brushless DC Motor

"MRC01" is a robot controller that allows for easy introduction and control of robots in three steps: "initial setup," "motion programming," and "operation confirmation." It can control self-made robots using small robots like "OVR" and actuators from the "αSTEP AZ series/AZ series." Additionally, it is equipped with convenient features that utilize information on the position and angle of workpieces obtained from a camera to operate the robot. 【Features】 ■ Easy introduction of robots into existing systems ■ Simple setup even for first-time users ■ Automation of more advanced tasks with integration features for 2D cameras *For more details, please download the PDF or feel free to contact us.

• controller

"OVR" is a simple and compact industrial robot. Its installation area is 130mm x 130mm (excluding OVR4088K5-V), and it uses aluminum alloy for the arm material, achieving lightweight design. Due to its small size and light weight, it can be combined with an electric slider to expand the horizontal operating range. Additionally, we offer a robot controller unit "MRCU series" for easy control of this product, as well as the robot controllers "MRC01/MRC01-C." [Features] - A simple industrial robot driven by the αSTEP AZ series - Automation achieved by controlling it with an intuitive robot controller - Maintenance costs reduced by allowing for the replacement of motors and arms *For more details, please download the PDF or feel free to contact us.

• Other industrial robots

The "DRLII series" is a compact electric cylinder that integrates a stepping motor and a ball screw to achieve linear motion. The driver features a built-in type with high functionality and flexibility in system configuration, supporting FLEX-compatible positioning functions. This contributes to the miniaturization of devices by reducing mechanical components such as couplings and enhances device performance with high-precision positioning. We offer a lineup including the "guide type," which allows for easy direct attachment of loads, and the "table type," which enables transport while keeping the height of moving parts low. 【Features】 ■ High-precision positioning ■ Uses a stepping motor that stops precisely ■ Three types to choose from based on application *For more details, please download the PDF or feel free to contact us.

• cylinder

The "DGII Series" is an integrated product that combines a hollow rotary table and motor, allowing for the direct attachment of large inertia discs and arms. The interior of the actuator features a reduction mechanism, enabling high-output drive. Additionally, the hollow output table employs cross roller bearings, achieving high output and high rigidity. The output table allows for the direct attachment of device tables and arms, reducing the effort and costs associated with mechanism design, parts procurement, and belt tension adjustments compared to using mechanical components like belts and pulleys. 【Features】 - Reduction of effort in parts procurement, mechanism design, and assembly adjustments - Hollow output table with a maximum hollow diameter of Φ100mm - Maximum allowable torque of 50N·m - Maximum allowable axial load of 4000N - Repeat positioning accuracy of ±15 arcsec (±0.004°) *For more details, please download the PDF or feel free to contact us.

• Actuator

We would like to introduce the "Electric Slider/Cylinder" that we handle. The electric sliders include the "EZS Series" with a simple dust-proof structure and the compact "EAS Series." For electric cylinders, we offer the high-precision "EZSH Series" and the high-rigidity "EAC Series." Since the motor, frame, guide rails, guide blocks, ball screws, and other components are selected and assembled, it is possible to reduce the design time and equipment startup time for our customers. 【Features】 <Electric Slider> ■EZS Series: Flat, high rigidity, simple dust-proof structure ■EAS Series: Narrow width, compact, high rigidity <Electric Cylinder> ■EZSH Series: High speed, high precision, long stroke, simple dust-proof structure ■EAC Series: Compact, high rigidity, high thrust *For more details, please download the PDF or feel free to contact us.

• cylinder

The "LJ Linear Head" utilizes the αSTEP AZ series in its motor section, enabling high-precision positioning as well as the transportation of heavy loads up to 200kg through a rack and pinion system. It features a simple structure where a parallel axis gear head can be inserted into the linear head and secured with screws, making installation on devices and motor maintenance easy. Additionally, we offer two types of the "L Series" with mounting angle dimensions of 60mm and 80mm. 【Features】 ■ Achieves a maximum load capacity of 200kg in a compact size ■ Contributes to design efficiency ■ Reduces effort in design, assembly, and maintenance *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "L Series" is a rack and pinion system equipped with an AC speed control motor, achieving speed control at a reasonable cost. It easily converts the rotational motion of the motor into linear motion. The linear motion mechanism is designed to be compact while being processed with high strength, allowing it to carry large loads. Additionally, by adopting this product, it is possible to reduce the number of components used compared to self-manufacturing and significantly decrease the labor required for design and assembly. 【Features】 ■ Easily construct a compact linear motion mechanism ■ Shorten the time from design to startup of the equipment ■ Achieve reasonable speed control for raising and lowering ■ Three variable speed ranges to choose from according to usage ■ Available with a maximum stroke of 1000mm ■ A compact body with rich functionality *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "EH Series" is an electric gripper that incorporates a battery-less absolute sensor built into the αSTEP AZ series drive motor. It achieves delicate gripping by finely adjusting the gripping force in 1% increments and approaching the workpiece at low speeds. Additionally, drivers compatible with various FA networks are available. It is suitable as an end effector for devices and robots controlled by a single network. 【Features】 ■ Approaches a wide variety of workpieces with "delicate gripping" ■ Compact and lightweight gripper designed with robots in mind ■ Differentiates between "gentle and soft" and "firm and strong" gripping ■ Functions as a network-compatible end effector ■ Equipped with the αSTEP AZ series drive motor *For more details, please download the PDF or feel free to contact us.

• Other industrial robots

The "DRLII series" is a compact electric cylinder that can significantly reduce design man-hours and time. By integrating a stepping motor and a ball screw, it achieves linear motion. It contributes to improved device performance through miniaturization of the equipment by reducing mechanical components such as couplings and high-precision positioning. Additionally, we offer drivers for the "CVD series," which includes pulse input type and RS-485 communication type. 【Features】 ■ High-precision positioning ■ Uses a stepping motor that stops precisely ■ Three types available to choose from based on application *For more details, please download the PDF or feel free to contact us.

• cylinder

The "DR/DRS2 series" is a compact electric cylinder suitable for high-precision positioning and fine feeding. With a compact body that integrates αSTEP and a ball screw, it contributes to the miniaturization and space-saving of equipment. The reduction in weight at the device's tip is expected to enhance design flexibility. Additionally, the microstepping drive and smooth drive function suppress vibrations at low speeds, allowing for smooth movement. [Features] - Structure that integrates αSTEP and ball screw - Stable fine feeding capability - Smooth movement at low speeds - Contributes to miniaturization and weight reduction of equipment - Reduces the time required to set up the equipment *For more details, please download the PDF or feel free to contact us.

• cylinder

The "DH Series" is a hollow rotary actuator that employs a hollow flange with a 5-phase stepping motor. It can achieve high-precision positioning and stable repetition of fine movements. When combined with a CVD driver, it enables micro-stepping drive and smooth drive functions, resulting in smooth operation with reduced vibrations during low-speed operation. Additionally, since the hollow flange does not use transmission mechanisms such as couplings or belts, there is no impact on precision due to the rigidity of components or assembly errors. 【Features】 ■ Hollow design simplifies piping and wiring at the device's tip ■ Flange mounting contributes to a reduction in components around movable parts ■ Achieves high-precision positioning *For more details, please download the PDF or feel free to contact us.

• Actuator

This catalog is a comprehensive catalog of "flow meters" handled by our company. It includes "electromagnetic flow meters" suitable for applications requiring sanitary conditions such as food, beverages, and pharmaceuticals, "differential pressure flow meters" compliant with SIL2 safety instrumentation, and "air management flow meters" equipped with leak detection functions that contribute to energy conservation. Additionally, we also introduce gas flow monitors and digital mass flow controllers, making it a useful reference when considering implementation. Please take a look. [Featured Products] ■ Electromagnetic Flow Meters ■ Differential Pressure Flow Meters ■ Differential Pressure Flow Meters (for gases and steam) ■ Vortex Flow Meters ■ Thermal Flow Meters *For more details, please download the PDF or feel free to contact us.

• Flow Meter

The "Ozack MF Series" is a linear bearing that achieves a clean environment without the need for grease leakage measures. It features special seals all around, excelling in dust and oil supply, and the newly developed seal structure has minimized grease leakage to the utmost limit. Additionally, the standardization of rust-resistant types makes it suitable for use in environments where corrosion resistance is required. Furthermore, improvements in grease sealing and sealing performance have resulted in quieter operation. 【Features】 ■ High reliability ■ Oil-free ■ Rust-resistant ■ Sealing performance ■ Quiet operation *For more details, please download the PDF or feel free to contact us.

• Bearings

The "HG-TQJD type" is a damper torque hinge with one-way and torque adjustment functions. It can stop lids or doors in any position during opening and closing, and allows for changes in the speed at which they close. Since almost no reverse torque is generated, it can be operated smoothly. We offer two types to choose from for installation: "top-mounted specification" and "inner back plate specification." Please feel free to consult us when placing an order. 【Solutions for these concerns】 ■ Gas springs open too much ■ Standard torque hinges may allow the mouth to open when closing ■ Want to open more than 90° but installing a stopper is cumbersome *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The document includes proposals for sustainable factories, such as "optimization," "resource conservation," and "energy saving." It provides detailed information on the air management system that enables visualization of production equipment status, as well as the reduction of pressure in factory lines through local pressurization and local boosting, starting with successful case studies by application. The content is presented with photos and diagrams, making it easy to reference. Please feel free to download it and take a look. 【Contents】 ■ Air Management System ■ Line Pressure Reduction ■ Air Blow Efficiency ■ Energy-Saving Equipment ■ Compact and Lightweight Design ■ Low Wattage *For more details, please download the PDF or feel free to contact us.

• nozzle
• cylinder
• valve

Introducing the all-stainless steel type of the APEX DYNAMICS servo motor reducers from the 'AES/AERS series', which is resistant to rust. It uses NSF-H1 certified food-grade grease. The reduction ratios are abundant, with 21 types for 'AES' ranging from 1/3 to 1/100, and 28 types for 'AERS' ranging from 1/3 to 1/200. We offer a wide variety of sizes and reduction ratios, accommodating both domestic and international motor manufacturers, from small to large. 【Features】 ■ Five frame numbers: 050, 070, 090, 120, 155 ■ A rich selection of reduction ratios (21 types for AES from 1/3 to 1/100, 28 types for AERS from 1/3 to 1/200) ■ Uses NSF-H1 certified food-grade grease ■ Protection rating IP67 ■ Standard delivery time is approximately 3 to 5 weeks after order *For more details, please download the PDF or feel free to contact us.

• Gearbox