アメリカン電機 List of Products and Services

The "Waterproof Flange Inlet" is a reverse heart-type wiring device that is ideal for receiving power for portable equipment, charging devices, and generators, where there is a desire to eliminate power cables. It uses a cord connector body on the power supply side, and by inserting it into the flange inlet installed on the equipment or wall, it supplies electricity. It is waterproof when the cover (lid) is fully closed. It complies with IP44 standards based on JIS C0920 (protection rating for electrical machinery enclosures). 【Features】 ■ Receives power ■ Waterproof when the cover (lid) is fully closed ■ IP44 compliant *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The "Waterproof Flange Inlet (Dustproof and Splashproof Type)" is a device used to receive power for equipment such as outdoor portable devices and charging units, where there is a desire to eliminate power cables. It becomes waterproof when combined with a flat cover or a waterproof round cover. It is compliant with IP65 standards, providing protection against dust and water splashes from all directions, both during use and when not in use. 【Features】 ■ Installed on equipment where power cables are to be eliminated, receiving power ■ Waterproof specification when combined with a flat cover or a waterproof round cover ■ Compliant with IP65 standards based on JIS C0920, both during use and when not in use *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

This is a direct-connection type high-capacity (high current) device designed to be installed on outdoor portable equipment, charging devices, generators, etc., to receive power by connecting to a power supply cable connector body. By using a 60A waterproof cable connector body on the power supply side, it achieves a high protection rating of IP65 for dust and water resistance during use. When not in use, covering it with the included cover maintains the same IP65 dust and water resistance specifications.

• Other power sources

Our company offers a high-spec "OA Tap" that supports daisy chaining and is compatible with VCT 3.5mm² wiring. The materials used for the casing and built-in outlets are made of nylon resin, which excels in heat resistance, oil resistance, chemical resistance, abrasion resistance, and tracking resistance, and meets UL-certified flame retardant specifications (UL94 V-0). Additionally, all terminal connections for the wiring are located on the back of the outlet, making the wiring process easy. 【Features】 ■ Versatile design that allows daisy chaining ■ Made of flame-retardant nylon resin with excellent heat resistance and tracking resistance, UL94 V-0 certified ■ Commonized wire strip length across all types ■ Combinations of five different plug shapes ■ Option to select power plugs *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

American Electric Co., Ltd. manufactures custom OA taps. In addition to standard products for multi-use OA taps, we can accommodate custom requests starting from just one unit, provided the conditions are met. Please feel free to contact us. 【Selection Guide】 ■ Choose a model - Select a tap type that matches the number of outlets ■ Choose an outlet shape - Select the combination of built-in outlet units ■ Choose a plug and wire - Choose whether to include a wire or not - If included, select the wire length and plug shape ■ Decide on the quantity and request a quote *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

The "Tower Tap" is an OA tap with a grounded type 2P 15A 125V. The outlets are arranged vertically on both sides. It features a stable base that prevents tipping, making it a "vertical type" with multiple outlets. In crowded wiring situations commonly seen in offices, such as power and information cables, the outlet positions can be easily identified at a glance without being obscured. 【Features】 ■ Outlets arranged vertically on both sides ■ Stable base to prevent tipping ■ Usable up to a total of 15A ■ Easy to confirm power outlet positions at a glance ■ Reduces the intrusion of dust and other foreign objects into the outlets *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

The "Paratap" is a grounded type 2P 15A 125V OA tap that has been compactly designed by arranging multiple outlets in "parallel" rather than in series. It can be used up to a total of 15A. We also offer products with "noise filter/surge protection features." 【Features】 ■ Compact ■ Grounded type 2P 15A 125V ■ Usable up to a total of 15A ■ Available in 8 and 12 outlet configurations ■ Products with "noise filter/surge protection features" are also available *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

It is suitable for use with servers and UPS systems that have power plugs compliant with NEMA standards 5-20/6-15/6-20. 【Features】 ■ Compatible with various types of wires, including cab tire cables of 1.25 to 3.5 mm² and VVF 1.6 to 2.0 mm. ■ The materials used for the case and built-in outlets are nylon resin with UL-certified flame retardant specifications (UL94 V-0). ■ Compliant with NEMA 5-20/NEMA 6-15/NEMA 6ALT-20, making it ideal for use as a power source for computer peripherals. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Access Tap" is an OA tap that allows for daisy chaining and is designed to accommodate VCT 5.5mm² wiring. It features four outlets on the side, making it suitable for use in environments such as free access floors that require reliable connections. It has a rated capacity of 2P 15A for grounding, allowing for a total usage of up to 15A. 【Features】 ■ Versatile design that allows for daisy chaining ■ Secures various types of wiring, including VCT 5.5mm² ■ Made of environmentally friendly nylon resin ■ Two types of outlet shapes ■ Supports two connection methods *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

The "OA Joint Tap" is an outlet with a connection feature that allows for easy modification and expansion even after the power environment has been laid out. It uses flame-retardant grade UL94 V-0 nylon resin for the main body and case material. With the adoption of an L-shaped hook, it can be placed flat with the insertion port facing up, or positioned on its side to prevent dust intrusion. 【Features】 ■ Easy modification and expansion with a connection outlet ■ Main body and case material made of flame-retardant grade UL94 V-0 nylon resin ■ Rated for grounded type 2P 15A, usable up to a total of 15A ■ Can be mounted in two directions *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

The "Universal OA Tap" is a standard series of magnetic OA taps available in configurations from 2 to 8 outlets, designed for grounded type 2P 15A 125V. The standard type comes with an LED indicator for power confirmation, while the type with surge protection features an LED that confirms the operation of the function. 【Features】 ■ Grounded type 2P 15A 125V ■ Available in 2, 4, 6, and 8 outlets ■ Standard type includes an LED for power confirmation ■ Type with surge protection includes an LED to confirm function operation *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

This product is an OA tap with a grounding type 2P 15A 125V and six outlets, equipped with a 15A circuit breaker with overload protection or a 15A leakage breaker (sensitivity current 15mA). It can instantly detect and cut off the current in the event of overcurrent or leakage due to overload or short circuit, thereby preventing damage to connected devices and strongly supporting the establishment of a safe power environment. 【Features】 ■ Circuit Breaker - Cuts off the current when overcurrent occurs due to overload or short circuit. ■ Leakage Breaker - Cuts off the current not only in the case of overcurrent due to overload or short circuit but also when leakage occurs. - Rated sensitivity current (indicating the sensitivity to leakage) is 15mA. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

This product is an OA tap that allows you to turn peripheral devices on and off simultaneously in conjunction with the power switch operation of the main computer. It contributes to energy savings by improving efficiency and preventing forgetting to turn off devices. It can be used with a grounded 2P 15A 125V, with a total of up to 1500W. 【Features】 ■ Linked with the power switch operation of the main computer ■ Allows simultaneous on/off control of peripheral devices ■ Contributes to energy savings by improving efficiency and preventing forgetting to turn off devices ■ Can be used with a grounded 2P 15A 125V, with a total of up to 1500W *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

This product is a 30A rated OA tap type multi-socket that can connect 5.5mm² and 8mm² wires and is suitable for fixed use. It demonstrates its power in various environments, including machinery and peripheral equipment rated for 30A, as well as in situations requiring sudden power installations due to the introduction of UPS (Uninterruptible Power Supply) or PDU (Power Distribution Unit). Additionally, by adopting an L-shaped hook, it allows for both standard fixed installation with the socket facing upwards and side-fixed installation that prevents dust intrusion. NEMA standard compliant products such as NEMA L5-30 and NEMA L6-30 are also available in the lineup. 【Features】 ■ Can be fixed in two directions ■ The case is made of nylon resin, which excels in flame resistance, durability, and impact resistance ■ Can be used up to a total of 30A ■ Demonstrates its power in various environments ■ Suitable for use with our company's socket bars for power supply *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

This product is a 20A multi-tap (OA tap) that can connect 3.5mm² and 5.5mm² wires and allows for daisy chaining. The case is made of nylon resin that excels in flame resistance (UL94 V-0 grade), durability, and impact resistance. It demonstrates its effectiveness in various environments, such as 20A specifications for machinery and peripheral equipment, three-phase 200V systems, and sudden power installations associated with UPS (uninterruptible power supply) and PDU (power distribution unit) setups. NEMA standard compliant products such as NEMA L5-20 and NEMA L6-20 are also available in the lineup. It can be used up to a total of 20A. 【Features】 ■ Can connect 3.5mm² and 5.5mm² wires ■ Daisy chaining possible ■ Case made of nylon resin that excels in flame resistance, durability, and impact resistance ■ Can be used up to a total of 20A ■ Effective in various environments such as 20A specifications for machinery and peripheral devices, temporary power supplies at exhibition venues, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

This is a single outlet box rated for 30A with a hook type connection that can accommodate 8mm² and 14mm² wires. It supports an increase in wire conductor size to reduce power loss. It demonstrates its effectiveness in various environments, including machinery and peripheral equipment rated for 30A, as well as in the installation of sudden power sources due to the introduction of UPS (uninterruptible power supply) and PDU (power distribution unit). NEMA standard compliant products such as NEMA L5-30 and NEMA L6-30 are also available. 【Features】 ■ Can connect 8mm² and 14mm² wires ■ Hook type rated for 30A ■ Supports an increase in wire conductor size ■ Suitable for use with our company's power outlet bars *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

We would like to introduce our "Adapters/Magnets" that we handle. The "Adapter" converts the shape of the insertion port of already installed devices. Our adapter series offers a wide variety of 15A 125V options, allowing you to choose according to your needs. The "Magnet" can be attached to OA taps and other devices for temporary fixation to steel desks and similar surfaces. 【Lineup】 <Adapters> ■ KD0011 ■ KD0030 ■ K6002 <Magnets> ■ Z0204 ■ Z0206 ■ Z0353 *For more details, please refer to the PDF materials or feel free to contact us.

• Wiring materials

This product is a socket cap designed to prevent dust, metal shavings, and unauthorized electricity usage from entering unused sockets, serving as a safety and security measure. We offer a variety of shapes to match 15A, 20A, and 30A socket types. The hook type "Z0209, Z0213, Z0215, Z0216, Z0217" comes with a label indicating "Not in Use," allowing the product to accommodate both displayed and non-displayed options. 【Features】 ■ Prevents dust, metal shavings, and unauthorized electricity usage from entering unused sockets ■ Offers a variety of shapes to match different socket types ■ Made from polypropylene resin *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

We would like to introduce our "power cables." The "power cable" is made of highly flexible vinyl cab tire cable. It has a high allowable current value and excellent heat resistance, making it suitable for use in power supply and extension wiring for OA taps. 【Features】 ■ Highly flexible vinyl cab tire cable ■ Suitable for use in power supply and extension wiring for OA taps *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

This product can be connected to a 38mm² power trunk line within the factory facility and downsizes to a 14mm² wire through a 60A output outlet, supplying electricity to various devices. The outer shell is made of polycarbonate, a super high-strength resin known for its durability, even being used in riot police shields. The material for the insertion port is nylon resin, which excels in heat resistance and tracking resistance. Additionally, the terminal block also uses nylon resin containing filler (glass fibers) to enhance strength and performance. Both resins are flame retardant grade UL94 V-0. 【Features】 ■ Structure capable of feeding wiring for 100A rated wires ■ Equipped with a 60A output outlet with a hook type ■ Pursues durability and safety with flame retardant grade UL94 V-0 resin ■ Includes wire band for plug fixation and dust cover ■ Wide range of wire movement ■ Downsizing *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

The "Mobile Branch Box (Leakage Breaker)" is a steel-made branch outlet box that can supply power to two 30A outlets with a 60A input and is portable. By connecting it to a T-type branch connector body on a 100A main line, two 30A outlets can be used directly. By installing a 30A leakage breaker at each outlet, it protects connected devices from overcurrent due to overloads and short circuits, as well as leakage. 【Features】 ■ Input is rated for grounded 3P 60A 250V/480V ■ Flexible settings for cable type, length, and plug type ■ Each outlet can handle up to 30A, with a total of 60A for two outlets ■ Rubber feet on the bottom prevent damage to the installation surface ■ Equipped with a metal handle for easy transport during installation or relocation *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The "Portable Junction Box / Junction Box" consists of a rubber cover type portable junction box that can be relocated and a sturdy steel plate junction box with screw holes for fixing. It features a structure that can accommodate sudden power expansions on-site. The rubber cover type receives power through a connector body from the inlet at the bottom of the main unit. The steel plate type connects wires by opening the cover and passing the wires through a conduit. 【Features】 ■ Structure that can accommodate sudden power expansions on-site ■ Relocatable with a rubber cover type (portable junction box) ■ Sturdy steel plate type with screw holes for fixing (junction box) *For more details, please refer to the PDF materials or feel free to contact us.

• Other office supplies

The "NEMA L6-20" is a robust junction box made of steel plate, designed to accommodate power expansion on-site. By connecting a 30A (NEMA L6-30) plug-type connector body to the waterproof flange inlet on the side of the main unit, electrical supply can be provided to this junction box. It is equipped with a 30A rated ground fault circuit interrupter (GFCI) that cuts off the current in case of overload, short circuit, or leakage. 【Features】 ■ Robust outer casing made of steel plate ■ 20A output with four receptacles on both sides ■ Capable of supplying electricity to the junction box ■ Equipped with a 30A rated ground fault circuit interrupter ■ Provides IP44 waterproof performance when all covers on the receptacles and breaker section are closed *For more details, please refer to the PDF document or feel free to contact us.

• Other Boxes

This product features a cover made of chloroprene rubber and is a durable branch code connector body. The current rating is 15A, and it has a grounding type with 2 poles. It comes with a terminal block for sending that can connect wires of 3.5mm² and 5.5mm². 【Features】 ■ Cover made of chloroprene rubber ■ Excellent durability ■ Comes with a terminal block for sending that can connect wires of 3.5mm² and 5.5mm² *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The "floor outlet" is a device that can be placed on or under the floor and features a duplex receptacle with a removable plug. The electrical connection uses a screwless terminal method for copper solid wires (VVF 1.6φ, 2.0φ), allowing for smooth wiring work. VCT cables can also be connected using rod-shaped crimp terminals. It has a permissible current of 20A, enabling daisy chaining. 【Features】 ■ Can be placed on or under the floor ■ Has a duplex receptacle ■ Allows for smooth wiring work ■ VCT cables can be connected using rod-shaped crimp terminals ■ Has a permissible current of 20A, enabling daisy chaining *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The "Waterproof Portable Distribution Box" is a movable waterproof distribution box made of steel plate. By connecting a 30A rated cord connector body to the waterproof flange inlet on the side, it can supply power to a 15A locking type outlet or a 20A plug type outlet. Each circuit is protected by a circuit protector or a ground fault circuit interrupter. It is waterproof when the cover is fully closed. It is equivalent to IP44 based on JIS C0920 (protection levels for the outer casing of electrical machinery). 【Features】 ■ Structure that can accommodate sudden power expansions on-site ■ Suitable for emergency power supply ■ Also suitable for outdoor use ■ Movable waterproof design made of steel plate ■ Waterproof when the cover is fully closed (equivalent to IP44) *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The "Concent Bar" is a compact power strip designed to supply power to IT and office equipment, which can be mounted on a 19-inch rack. It features four outlets compliant with IEC standards 60320/C-13 or C-19, and we offer options such as "IEC C-13" and "IEC C-19," as well as a "branch circuit breaker" with a 15A safety breaker that includes short-circuit protection for the outlets. Additionally, we also handle "branch circuit" options that can supply 15A of power. 【Features】 ■ IEC C-13 / IEC C-19 - Compact and suitable for 200V servers ■ Branch circuit breaker included - Allows for flexible configuration of cable types, lengths, and plug shapes ■ Branch circuit - Each outlet can handle up to 15A, with a total of 30A for two outlets *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The "1U Power Strip" is a multi-outlet power strip that can supply 15A and 20A power using a 30A input plug, and it comes with brackets that allow it to be mounted in a 19-inch rack with a 1U size. The outlets include 15A locking type, NEMA L6-15, NEMA L6-20, IEC C-13, and IEC C-19. Each outlet is equipped with a circuit protector that detects overcurrent and cuts off the current nearby. Additionally, there is a 10-outlet power strip with a 15A input locking type available. The rack installation brackets can be mounted in five different patterns on the power strip body, allowing for various power configurations, whether horizontally or vertically, as well as on the back or side of the rack. All types comply with the Electrical Appliance and Material Safety Law (PSE), making them suitable for use in Japan. An optional bracket is available that allows the unit to be installed 40mm inside the rack, enabling the use of plugs at the main outlet while the front cover of the rack is closed. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

The "NEMA L6-20" is a power strip that can be mounted in a 1U size of a 19-inch rack. It has four outlets, each equipped with a 20A rated safety breaker. Since the breaker handle does not protrude from the surface, it will not accidentally turn OFF even if touched. 【Features】 ■ Can be mounted in a 1U size of a 19-inch rack ■ Equipped with a 20A rated safety breaker for each outlet ■ UL/CSA certification obtained ■ Complies with the Electrical Appliance and Material Safety Law (PSE) ■ Strongly supports the unification of product specifications for domestic and overseas markets *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products

A new 200V model of the "1U Power Strip" with a 30A input that can be mounted in a 1U size rack is now available, featuring a NEMA L6-30 input plug and four IEC C-19 outlets. Each outlet can be used up to 20A, with a total maximum of 30A for all four outlets combined. It complies with the Electrical Appliance and Material Safety Law (PSE), ensuring safe use within Japan. 【Features】 ○ Each outlet is equipped with a 20A rated circuit protector that detects overcurrent and cuts off the current. ○ Installation holes for code clamps (sold separately) to prevent IEC C-20 plugs from falling out are provided next to each outlet. ○ Bracket that can be mounted in three directions. ○ RoHS2 compliant. For more details, please contact us or download the catalog.

• Other Connectors

This product is a compact 1U power strip that can be installed in a 19-inch rack with minimal space. It complies with the Electrical Appliance and Material Safety Law (PSE), making it suitable for use in Japan. It comes with a bracket that allows the unit to be installed approximately 40mm inside the frame rack, enabling the front cover of the rack to be closed even when a plug is inserted into the power strip's outlet. 【Features】 ■ Can be installed in a 19-inch rack with minimal space ■ Comes with a bracket that allows the unit to be installed approximately 40mm inside the frame rack ■ The front cover of the rack can be closed even when a plug is inserted into the power strip's outlet ■ Complies with the Electrical Appliance and Material Safety Law (PSE) ■ Suitable for use in Japan *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

The 0U type multi-outlet power strip with IEC C-13 and IEC C-19 connectors, which can be mounted vertically in a 19-inch rack and has a 20A or 30A input, has been renewed. The 30A input type features a new 20A circuit protector that splits the power circuit into two branches, capable of detecting overloads and cutting off current in case of overcurrent. Unlike the previous breaker-equipped type, this product has no protrusions, improving the workability during installation and when inserting or removing server equipment. Additionally, all products comply with the Electrical Appliance and Material Safety Law (PSE). 【Features】 ■ Can be mounted vertically in a 19-inch rack ■ Improved workability during installation and when inserting or removing server equipment ■ Reduces the hassle and cost of securing plugs using cable clamps ■ Complies with the Electrical Appliance and Material Safety Law (PSE) *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

The "0U Power Strip (Red and Blue Models)" is a product that can be mounted vertically in a 19-inch rack. It is a 0U type power strip with multiple IEC C-13 outlets, available with either 20A or 30A input. The included plugs are also color-matched to the power strip body, making it even easier to identify power systems. It complies with the Electrical Appliance and Material Safety Law (PSE), allowing for use within Japan. 【Features】 ■ Can be mounted vertically in a 19-inch rack ■ Included plugs are color-matched to the power strip body ■ Easier identification of power systems ■ Complies with the Electrical Appliance and Material Safety Law (PSE) ■ Usable within Japan *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

The "Concent Bar (Branch Type)" is a branch outlet bar that can supply a 15A power source using a 30A (NEMA L5-30) input plug. It can be used up to 15A per outlet, with a total of 30A for two outlets combined. Each outlet is equipped with a 15A-rated circuit protector that can detect overcurrent and cut off the current. 【Features】 ■ Supplies a 15A power source using a 30A (NEMA L5-30) input plug ■ Usable up to 15A per outlet, with a total of 30A for two outlets combined ■ Each outlet has a circuit protector that can detect overcurrent and cut off the current ■ Equipped with a 15A-rated circuit protector ■ Can be mounted not only vertically in a 19-inch rack but also in a 1U size using optional mounting brackets (model number: HKC-SPT1U) *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

The "Concent Bar with Breaker (Branch Use)" is a breaker-equipped power strip that can supply a 15A power source from a grounded 2P 30A 125V input. It can be mounted not only vertically in a 19-inch rack but also in a 1U size using separately sold mounting brackets (model number: HKC-SPT1U). Additionally, various configurations are possible to suit the environment within the rack, including the shape of the input plug and the type and length of the cable. 【Features】 ■ Supplies a 15A power source from a grounded 2P 30A 125V input ■ Various configurations possible to suit the environment within the rack, including the shape of the input plug and the type and length of the cable ■ Each outlet can be used up to 15A, with a total of 30A for two outlets ■ Each outlet is equipped with a 15A safety breaker *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

We would like to introduce brackets that allow you to change the installation position when installing various power strips in a 19-inch rack. We offer the 1U power strip 40mm bracket "HKC-SPT40" and "HKC-SPT40B," which allow the power strip's outlet to be installed 40mm inside the rack, as well as the robust metal L-shaped bracket "HA-SPTL" for 0U power strips. 【Features】 ■ 40mm bracket for 1U power strips - Allows the use of plugs into the 1U power strip outlet while the front cover of the rack is closed. ■ L-shaped bracket for 0U power strips - Enables vertical installation against the panel mount frame of the rack when installing a 0U power strip in a 19-inch rack. - Robust metal L-shape. *For more details, please refer to the PDF document or feel free to contact us.

• bracket

We would like to introduce optional parts that can be applied to various power strips for safer and more convenient use. We offer a "bracket" that allows you to install a 1U power strip 40mm inside a 19-inch rack, as well as "cable clamps," "cable sets," and "rack mounting screw sets." 【Lineup】 ■ Bracket ■ Cable Clamp ■ Cable Set ■ Rack Mounting Screw Set *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The Z0220 is a cord clamp designed to prevent the accidental disconnection of IEC C-14 and IEC C-20 plugs when inserted into the receptacle of a power strip. A new reusable snap type has been introduced that allows for removal by pinching the base even after installation. By using two levers, it is possible to adjust the position according to the length and thickness of the plug. It can be used with the IEC C-19 receptacles of the HKC2910PT, HKC2920PT, and 0U power strips. 【Features】 ■ Prevents accidental disconnection of IEC C-14 and IEC C-20 plugs when inserted into the receptacle of a power strip. ■ Reusable snap type allows for removal by pinching the base even after installation. ■ Position adjustment is possible according to the length and thickness of the plug. ■ Usable with the IEC C-19 receptacles of the HKC2910PT, HKC2920PT, and 0U power strips. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

Introducing the "Embedded Outlet Plate." This product is available in two types: "Hook Type and Lock Type," which features markings on the plate surface indicating PULL ⇔ LOCK and NUKERU ⇔ LOCK, and a "Flat Blade Type" that can accommodate various embedded outlets. 【Features】 ■ Hook Type and Lock Type - Markings on the plate surface indicating PULL ⇔ LOCK and NUKERU ⇔ LOCK ■ Flat Blade Type - Compatible with various embedded outlets *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The "Blank Plate" is a plate used to cover boxes from which fixtures have been removed or unnecessary holes in walls. With a wide variety available, you can choose from different materials and styles according to your intended use and environment. (Each plate comes with screws, except for rubber packing.) 【Features】 ■ Covers boxes from which fixtures have been removed and unnecessary holes in walls ■ Wide variety available ■ Choose from different materials and styles according to your intended use and environment ■ Each plate comes with screws, except for rubber packing *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

The "Waterproof Lift Cover Plate" is a cover-equipped outlet plate for L-shaped plugs rated at 15A, 20A, and 30A, and flat blade plugs rated at 30A, 50A, and 60A, which demonstrates IPX3 compliant waterproof performance when the cover is fully closed. It is also compatible with 15A rated flat blade and locking type embedded outlets, allowing the use of swing plugs or plugs with smaller diameters, as well as thin and flexible wires. Unlike downward-facing rainproof outlets, the insertion point faces forward, making it easy to plug and unplug the power plug. The cover can be opened and closed even when the plug is inserted into the outlet. The material used is high-strength polycarbonate that contains no harmful substances and is flame-retardant (UL94V-2 or higher). Additionally, it features a simple locking mechanism that makes it difficult for the cover to open even when subjected to vibrations. A padlock can be used to secure the cover to the main body, preventing unintended opening and closing. 【Features】 ■ RoHS2 compliant ■ The cover is transparent, allowing for confirmation of the plug connection status even when closed ■ Strong installation is possible with four-point fastening to the knockout hole *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Other electronic parts

The "WLP5000" is a dedicated plate for flush-mounted outlets of flat blade type 30A, 50A, and 60A. The cover is made of clear molded material, allowing for the connection of L-shaped plugs to be confirmed even when closed. The body and cover are made from polycarbonate, an ultra-high-strength resin known for its exceptional durability, which is even used in riot police shields. When the power is not used for an extended period, a rubber blanking piece can be used to seal the cable opening, preventing the intrusion of dust and other debris. It also comes with a set of labels that can be affixed according to usage conditions, such as voltage indicators. 【Features】 ■ Suitable for using L-shaped plugs that can run along the wall. ■ Waterproof performance with protection rating IPX3 (rainproof) when the cover is fully closed. ■ The cover can be opened and closed while the L-shaped plug is inserted into the outlet. ■ The opening and closing cover can be held in the fully open position (120°). ■ There is a simple locking function that prevents the cover from opening due to unexpected vibrations or impacts when fully closed. *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "Dustproof and Waterproof Sealock Plate" is a cover-type plate that employs a "locking mechanism" with excellent sealing performance, making it difficult to open even under significant impact or vibration. Depending on the installation method, it can achieve IP65 (dust-tight and splash-proof) specifications when the cover is fully closed. It can be selected according to the specifications and environment of the embedded outlet you will be using. 【Features】 ■ By using the mounting holes for dust-tight and splash-proof specifications at the four corners and securing it with screws, it has waterproof and dustproof functions with IP65 (dust-tight and splash-proof) protection against dust and splashes from all directions when the cover is fully closed. ■ By using the locking hook located at the tip of the cover, the cover can be locked to the main body when closed. ■ The cover can be held in the fully open position (180°) during use. ■ The plate body and cover are made of flame-retardant nylon resin with excellent heat resistance and tracking resistance, compliant with UL94 V-0. ■ RoHS2 compliant product. *For more details, please request documentation or view the PDF data available for download.

• Other Connectors

The "Waterproof Panel Lift Cover" is a cover with a hinged plate that can be installed on outlets for panels. To maintain waterproof performance, a soft resin packing is used on the bottom surface of the plate. It is waterproof when the cover is fully closed. It complies with IP44 standards based on JIS C0920 (protection ratings for electrical machinery and equipment). 【Features】 ■ It has waterproof performance of IP44 based on JIS C0920 when the cover is fully closed. ■ The hinged cover can be held in place at the plug usage position (80°) and fully open position (160°). ■ It includes a simple locking function to prevent the cover from opening due to vibrations or impacts when fully closed. ■ To maintain waterproof performance, a soft resin packing is used on the bottom surface of the plate. *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

This plate allows for IP65 (dust-tight and splash-proof) waterproof and dustproof performance in the power supply section by covering the plug with a separately sold waterproof round cover when in use, and with the included flat cover when not in use. (It functions as a waterproof and dustproof outlet.) Due to its high sealing capability and durability, it is suitable not only for outdoor use exposed to wind and rain but also for indoor use in areas such as kitchens and food manufacturing factories (food factories), food processing workplaces (processing plants), pharmaceutical manufacturing plants (pharmaceutical factories), and clean rooms that do not allow any dust, where cleaning of floors and equipment or splashing of water may occur. It is an IP65 compliant product that is protected against dust and water jets from all directions, both when in use and when not in use. 【Features】 ■ Provides dust-tight and splash-proof performance when the outlet is in use or not in use ■ High sealing capability and durability ■ Capable of installing power supply up to high capacities (15A to 60A) regardless of indoor or outdoor use ■ IP65 compliant product *For more details, please refer to the PDF materials or feel free to contact us.

• Other office supplies