アメリカン電機 List of Products and Services

Our company offers a wide range of "code bushings" (cable bushings). We have nylon code bushings with excellent impact resistance, such as the "BN nozzle," which protects the surfaces of penetrations like electrical wires, and the "BN cap," which is ideal for protecting unnecessary holes left after removing penetrations like wires, cables, and pipes, as well as pre-drilled holes intended for wiring. We also offer nylon resin "joint bushings" that allow for length adjustment through a joint connection method. 【BN Nozzle Features】 - The nozzle body is fixed by inserting it into a wall or panel and securing it with a nut from the back, sandwiching the panel. - It possesses a well-balanced combination of excellent properties such as heat resistance, impact resistance, abrasion resistance, oil resistance, chemical resistance, and tracking resistance. - Made from flame-retardant nylon resin that does not contain harmful substances. - Both ends of the inner surface are beveled to minimize scratches on the surface of the penetrations. - One-touch screw with just a simple screw-in mechanism. - Available in a wide range of sizes from small diameters of φ8 to large diameters of φ120. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

The "BN Nozzle" is a cable bushing designed to protect through holes in walls and panels, as well as cables, wires, and piping inside those holes. It is fixed by inserting the nozzle into the hole and securing it with a nut. The "BN Cap" is a simple cover specifically designed for the BN Nozzle (cable bushing) that is ideal for protecting unnecessary holes left after removing cables, wires, or piping, as well as for pre-drilled holes intended for future wiring. It can be easily secured by simply pushing it into the BN Nozzle. 【Features】 ■ Excellent balance of properties such as heat resistance, impact resistance, and abrasion resistance ■ Made from flame-retardant nylon resin (UL94 V-2) that does not contain harmful substances ■ The BN Nozzle features a one-touch screw that only requires screwing in ■ The BN Cap features a one-touch push that only requires pushing in *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

This product is a nylon resin bushing designed to protect through holes and the cables and pipes within them. Thanks to a new nozzle design, the length can be adjusted depending on the combination used. The nylon resin used has a well-balanced combination of heat resistance, oil resistance, wear resistance, and chemical resistance. Additionally, it is made from flame-retardant material (UL94V-0) and does not contain harmful substances, making it environmentally friendly. It is also recyclable, contributing to a safer environment. 【Features】 ■ One-touch screw that only requires screwing in ■ Various combinations can be easily constructed ■ The joint screw uses a stable JIS metric trapezoidal screw (Tr60×3) ■ The mounting hole dimensions are compatible with φ65 (core drill can be used) ■ By using a cap (JB5C), it is possible to open and close the through hole as needed *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

This product is a cable gland that can secure wires by tightening them at the wire outlet when pulling them out from panels, boxes, or devices. The structure of tightening the grip with a set screw allows for a firm fixation. It can prevent wire dropouts or loosening due to excessive load on the wires, which could significantly impact connected devices, as well as reduce the burden on terminal parts. 【Features】 - Minimizes the protruding part from the mounting surface (11.0mm/17.5mm) - Contributes to space-saving - Uses UL94 V-2 or higher flame-retardant nylon resin with excellent heat resistance, oil resistance, and chemical resistance - Ensures reliable fixation of wires with a grip that uses a set screw - By swapping the upper and lower parts of the screw grip, it can accommodate a wide range of wire diameters *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

We offer a variety of optional products that can enhance the functionality and performance when combined with our wiring device products. These include various types of "screws" for mounting plates and devices, "magnets" that can be attached to OA taps and other devices for temporary fixation to steel desks, and "safety caps" that prevent dust, chips, and unauthorized power access from entering the sockets. 【Product Lineup (Excerpt)】 ■ Screws ■ Magnets ■ Crimp terminals ■ End caps ■ Bushing tubes, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

We introduce various screws for the installation of plates and equipment. Starting with the "M3 flat screw set" for equipment outlet installation, we also offer items such as "M4 nuts" for body bolts. We have a variety of screws and nuts suitable for your product usage. 【Product Lineup】 ■ Plate screws ■ Unified screws ■ M3 flat screw set ■ Body bolts ■ Rack mounting screw set ■ M4 nuts *For more details, please refer to the PDF document or feel free to contact us.

• nut

This product is a magnet that can be temporarily fixed to steel desks and other surfaces by attaching it to OA taps or other devices. It is designed for plug-in use and is compatible with multi-use OA taps, OA parallel taps, and access taps such as "Z0353," as well as models like "Z0204" and "Z0206," which can be installed by peeling off a seal. 【Product Lineup】 ■Z0204: With adhesive tape ■Z0206: With mounting screws ■Z0353: Plug-in type *For more details, please refer to the PDF document or feel free to contact us.

• Office furniture

We would like to introduce the various crimp terminals that we handle. Starting with round single-hole crimp terminals suitable for devices that can be connected with crimp terminals, we also offer open-type crimp terminals suitable for UL/CSA certified specifications. Additionally, we have copper tin-plated two-hole crimp terminals and copper single-wire (φ1.6 to 2.0) plug-in terminals that can be used with multi-use OA taps. 【Product Lineup】 ■ Round (R type) ■ Open-type (Y type) ■ 100A device round two-hole (RD type) ■ FE terminal *For more details, please refer to the PDF document or feel free to contact us.

• nut

This product is a waterproof cover that can be placed over a waterproof plug of type 3P 20A with a hook type grounding, maintaining the waterproof performance of the unused waterproof plug. It complies with JIS C0920 (protection grades for electrical machinery and equipment based on enclosures) IP65. The included ball chain can be attached to the threaded part of the grip of the waterproof plug. 【Features】 ■ Maintains waterproof performance when not in use ■ Complies with JIS C0920 (protection grades for electrical machinery and equipment based on enclosures) IP65 ■ The included ball chain can be attached to the threaded part of the grip of the waterproof plug *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

This product is a cap designed to prevent the intrusion of dust, metal shavings, etc., into unused sockets and to prevent unauthorized electricity usage, serving as a safety and security measure. There are versions for hook type and flat blade type/stop type. We offer a variety of shapes to match 15A, 20A, and 30A socket configurations. 【Features】 ■ Made of polypropylene resin ■ Electrically insulated ■ "Z0207" and "Z0208" can be inserted into both flat blade type/stop type 15A 125V 2P and grounded 2P sockets ■ The hook type includes a "Do Not Use" label, allowing the product to be used in either displayed or non-displayed states *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment

This product is a safety protection cover designed to avoid exposure of the charging section (connection part). We offer a lineup that includes outlet for equipment / 15A, 20A, 30A flange inlets (insert type), as well as double horizontal embedded sockets and double outlet for equipment (one-touch push type). 【Lineup】 ■ Insert type ■ Heat shrink type ■ One-touch push type *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment

We would like to introduce the covers we handle. By attaching them to waterproof plugs of grounding type 2P 20A, 3P 20A, 30A, 60A, and 100A, we can maintain waterproofness when not in use. We offer a lineup including "WKP203," "WKP30," and covers for 60A and 100A flange inlets such as "KF60." 【Features】 ■ Waterproof covers for 30A, 60A, and 100A waterproof code connector bodies - Maintains waterproofness when not in use - Equivalent to IP65 based on JIS C0920 (protection class based on the outer casing of electrical machinery) - Prevents dust from entering the socket when not in use (WK is for installation on 60A recessed outlets / WK100 is for installation on 100A flange outlets) *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety equipment

The "WKP204" is a waterproof cover that maintains the waterproof performance when not in use by covering a waterproof plug. The included ball chain can be attached to the threaded part of the grip of the waterproof plug. When installed, it meets the protection rating IP65, shutting out dust and water jets from all directions. 【Features】 ■ Maintains waterproof performance when not in use by covering the waterproof plug ■ Shuts out dust and water jets from all directions when installed ■ Meets protection rating IP65 ■ The included ball chain can be attached to the threaded part of the grip of the waterproof plug *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

A waterproof coupler is a high-quality silicone rubber coupling part that can enhance the performance of devices to "waterproof type" by being used at the connection between the plug and the cord connector body. It becomes a waterproof performance device when combined with the plug of the hook type 2P15A series (2112N, 2122N) and the cord connector body (2114N, 2124N). It is equivalent to IP64 based on JIS C0920 (protection class based on the outer casing of electrical machinery and equipment). 【Features】 ■ Can enhance the performance to "waterproof type" ■ Equivalent to IP64 based on JIS C0920 *For more details, please refer to the PDF document or feel free to contact us.

• Coupling

This product is a bushing tube used to eliminate gaps between the cable entry of plugs or cord connector bodies and the wires (cables), preventing potential issues before they occur. We offer a lineup including "BT15-2" with an inner diameter of φ15, "BT20-2" with φ20, and "BT25-2" with φ25. Please be careful not to damage the insulation of the wires during use. 【Features】 - Eliminates gaps between the cable entry of plugs or cord connector bodies and the wires - Prevents potential issues - Heat shrinkable tube type *For more details, please refer to the PDF document or feel free to contact us.

• tube

This product is an accessory that can be used with devices such as 100A plugs and cable connector bodies. The bushing is a tube-shaped rubber bushing made of chloroprene rubber, designed to eliminate gaps between the cable entry of 100A plugs or 100A cable connector bodies and the wires, and to prevent potential troubles. 【How to Use】 ■ When using 22mm² wires, pre-insert the rubber bushing into the cable entry of the 100A plug or cable connector body. ■ Available for 3-core and 4-core applications. *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce label sheets that can be used according to various applications, such as for fixed displays. Our plate labels include the "LB-S," which is suitable for dustproof and waterproof sealock plates, and the "PLC label," which is ideal for waterproof panel lift covers. Each label has a display label tailored to its application and can be easily affixed to the designated area. We also offer label sheets "LB-ET1" and "LB-ET2," which are suitable for T-type branch connector bodies. 【Features】 ■ Display labels available for various applications ■ Easy to affix to designated areas ■ Special sun cut processing (fading prevention treatment) is also applied for peace of mind *For more details, please refer to the PDF document or feel free to contact us.

• label

This product is a cord clamp for securing plugs to prevent accidental disconnection when using "IEC C-14" and "IEC C-20" plugs. The movable grip can be adjusted in position according to the length and thickness of the plug by using two levers. It is compatible with "HKC2910PT," "HKC2920PT," and the "IEC C-13," "IEC C-13" + "IEC C-19" types of the 0U outlet bar. 【Features】 ■ Prevents accidental disconnection when using "IEC C-14" and "IEC C-20" plugs ■ The movable grip allows for position adjustment according to the length and thickness of the plug by using two levers *For more details, please refer to the PDF document or feel free to contact us.

• Vice Clamps

We handle highly flexible vinyl cab tire cables. They have a high allowable current rating and excellent heat resistance, making them suitable for use in OA taps and feeder wiring. 【Features】 ■ Highly flexible ■ High allowable current rating (19A) and excellent heat resistance ■ Soft VCT 2mm² × 3C: white ■ Ideal for use with OA taps, etc. *For more details, please refer to the PDF document or feel free to contact us.

• cable

We would like to introduce exposed switch boxes for one and two outlets that can accommodate recessed outlets. Both the one-outlet and two-outlet versions can be directly connected with VE pipe size 22. The one-outlet version comes with a sleeve that allows for installation of size 16. 【Features】 ■ Can accommodate recessed outlets ■ Available in one-outlet and two-outlet versions ■ Direct connection with VE pipe size 22 ■ One-outlet version includes a sleeve for size 16 installation *For more details, please refer to the PDF document or feel free to contact us.

• switch

This product is an exposed box with a cover that allows for the installation of an embedded outlet. By properly implementing waterproof construction, such as inserting wire holes, and combining it with a waterproof plate, it meets the IPX5 equivalent based on JIS C0920 (protection class based on the outer casing of electrical machinery and equipment). By using brackets that allow for two-directional mounting at the four corners on the back of the main body, it can also be installed on walls. 【Features】 ■ Comes with a cover that allows for the installation of an embedded outlet ■ Edged with a waterproof packing that enables waterproof specification IPX5 ■ Mounting brackets for wall fixation (included) can be attached to the four corners on the back ■ Can be used as an exposed outlet by attaching various plates *For more details, please refer to the PDF materials or feel free to contact us.

• Other Boxes

The "Waterproof Multi Box" is an exposed box with a cover that allows for the installation of embedded outlets. By properly implementing waterproof construction, such as inserting wire entry holes, and combining it with waterproof plates, it meets the JIS C0920 (protection grade based on the outer casing of electrical machinery) IPX5 equivalent standard. Additionally, by attaching various plates, it can be used as an exposed outlet. 【Features】 ○ MBW7000 (single box) → Compatible with embedded outlets of up to 30A for hook type and up to 20A for flat blade type. ○ MBW7100 (double box) → Compatible with hook type outlets of 60A and flat blade type outlets from 30A to 60A, as well as waterproof plates specifically for hook type 20A and 30A outlets. ○ It is bordered with waterproof packing that enables IPX5 waterproof specifications. ○ Mounting brackets for wall fixation (included) can be installed at the four corners on the back side. ○ RoHS compliant product. For more details, please contact us or download the catalog.

• Other Connectors

This product is a copper jumper bar specifically designed for connecting outlets for 15A duplex devices. Available in two versions for 2 and 3 outlets of different lengths. Both versions allow for flexible spacing between the two outlets by providing width in the holes for connection with terminal screws. It can be used up to 20A. 【Features】 - All necessary preparations for jumper wiring, crimp terminals, insulation work, and crimp terminal processing can be done with this single product. - Contributes to cost reduction. - Improved wiring work efficiency due to the reduction of work steps. *For more details, please refer to the PDF document or feel free to contact us.

• Crimp Terminal

This product is a safety cap designed to prevent hand injuries and scratches to surrounding equipment by covering the tips of metal grip screws (two-piece, band type) and similar items. Made of soft resin, it can be easily used by simply placing it over the item. 【Features】 ■ Prevents hand injuries and scratches to surrounding equipment ■ Made of soft resin ■ Easy to use by simply placing it over the item *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Hyper Series" is a product that features high-level quality and an appearance overflowing with luxury. Starting with the "Hyper Plug," which is lavishly plated with rhodium, a rare metal (platinum group), the lineup includes products such as "Dual Hyper Embedded Outlets" and "Hyper Outlet Plates." 【Features】 ■ High-level quality and an appearance overflowing with luxury ■ In addition to audio power supplies, it suppresses the attenuation of AC power in environments such as computers, communications, broadcasting, testing and measurement, radar, and medical applications ■ Exhibits excellent performance in various environments requiring clear power and conductivity *For more details, please refer to the PDF materials or feel free to contact us.

• Wiring materials