折原製作所 Product Lineup

This is a device for measuring the Martens hardness of materials. It measures the HM (loading/unloading) curve and can evaluate both elastic and plastic deformations. It is suitable for hardness testing of resin materials and hard rubber. The dedicated software allows for the acquisition of objective data that does not rely on human perception.

• plastic
• Other measurement, recording and measuring instruments

The "SVP-100" is a strain inspection device that allows for easy observation of the strain state within transparent objects that cannot be seen with the naked eye. You can observe the distribution of strain through color and patterns while directly viewing the product, and measure the intensity of the strain. 【Features】 ■ Enables observation and measurement of strain through color and patterns while directly viewing the sample ■ Switchable between white light source and sodium light source ■ Quantitative measurement of strain is possible by using the included strain standard *For more details, please download the PDF or feel free to contact us.

• Optical Measuring Instruments
• Other measurement, recording and measuring instruments

The "SLP-1000" is a scattered light photoelastic stress meter that measures the stress distribution of chemically strengthened glass due to Li+⇔Na+ exchange, which cannot be measured by conventional waveguide-based surface stress meters, using scattered light photoelasticity. When there is a layer of K+ near the surface, it can perform cross-sectional stress distribution analysis by synthesizing information from the waveguide-based surface stress meter "FSM-6000." 【Features】 ■ Independent of refractive index distribution ■ Easy to accommodate curved glass ■ Capable of pinpoint measurements (laser spot diameter approximately 10μm) ■ Can be synthesized with data from "FSM-6000" *For more details, please download the PDF or feel free to contact us.

• Optical Measuring Instruments
• Other measurement, recording and measuring instruments

The "G-12RS2000" is a compact electric press equipped with a load setting device that uses a motor-driven screw feed system, allowing for precise load control and excellent performance in alleviating load shocks and controlling load speed. The heating plate is integrated with a heater cast into aluminum, providing good thermal efficiency and excellent temperature distribution across the surface. 【Features】 ■ High precision load control in low load ranges ■ Direct load detection with a load cell ■ Load is set digitally ■ Independent PID temperature control for upper and lower sections ■ Adjustable pressurization time *For more details, please download the PDF or feel free to contact us.

• Optical Measuring Instruments
• Other measurement, recording and measuring instruments

The "BTP-AT" is a Babine-type surface stress meter that can measure weak stresses, which were difficult to measure with conventional methods, with high precision and sensitivity. It is equipped with an automatic measurement function using a computer, achieving more stable measurements. 【Features】 ■ Compact and lightweight ■ Grip designed for easy handling ■ Allows for easy long-duration measurements ■ Eliminates measurement errors between operators through automatic measurement by PC *For more details, please download the PDF or feel free to contact us.

• Optical Measuring Instruments
• Other measurement, recording and measuring instruments

The "INV-SP1/10" is a starting device for spectral lamps that uses well-established Osram lamps. With a high lighting frequency of 50kHz, it has no flicker, making it suitable as a light source for photoelastic analysis and as a standard wavelength light source for various measuring devices. 【Features】 ■ Uses well-established Osram lamps ■ High lighting frequency of 50kHz eliminates flicker ■ Available with Na, Hg, Cd, HgCd, Cs, He, Ne, Rb, Zn ■ Equipped with a spare output, making it easy to integrate into devices and change the lighting direction *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

The "FSM-7000H" is a glass surface stress meter that can measure the surface stress and the depth of the stress layer of tempered glass. It can accommodate large glass by placing the measurement head on the glass for measurement. By using a PC and dedicated software, it reduces errors caused by the operator. 【Features】 ■ No individual differences in measurement due to automatic measurement ■ Easy quality management as data is saved ■ Can switch to manual measurement for samples with poor conditions ■ Compact and lightweight, suitable for measuring large glass ■ Built-in camera with a compact design *For more details, please download the PDF or feel free to contact us.

• Optical Measuring Instruments
• Other measurement, recording and measuring instruments

The "FSM-6000LE" is a glass surface stress meter that can measure strengthened glass with shallow stress layers, which are difficult to measure with visible light, by using short-wavelength light. It allows for automatic measurement and data storage via PC. The use of calibration standards minimizes measurement errors. 【Features】 ■ Non-destructive measurement ■ Capable of measuring single and double strengthened glass ■ Graphical display of cross-sectional stress distribution ■ Uses short-wavelength light as the light source ■ Software (FsmV) available in two versions (Standard, Premium) *For more details, please download the PDF or feel free to contact us.

• Optical Measuring Instruments
• Other measurement, recording and measuring instruments

The "FSM-6000LE" is a glass surface stress meter that measures surface stress and depth using photoelastic technology, which propagates light along the surface of the glass. It is also compatible with measurements of chemically strengthened glass. Additionally, it minimizes errors caused by the operator, demonstrating excellent functionality in product development and management. 【Features】 ■ Non-destructive measurement ■ No individual differences in measurement due to automatic measurement ■ Easy quality control as data is saved on a PC ■ Minimal measurement error using calibration standards ■ External output of measurement results is possible, etc. *For more details, please download the PDF or feel free to contact us.

• Optical Measuring Instruments
• Other measurement, recording and measuring instruments

A series of phase difference plates arranged in order. By simply aligning them with the sample using various strain gauges, the strain amount can be determined. They can also be used as calibration standards for various strain gauges.

• Analytical Equipment and Devices

This device allows light to pass along the interior of the glass and measures the stress and its distribution in the cross-section using photoelastic technology. It is managed by a computer, which reduces errors by the operator and demonstrates excellent functionality in managing measurement data.

• Other measurement, recording and measuring instruments