TOEI KAISHA, LTD. Product Lineup

AQpure is a water purification treatment device based on UF membranes. It filters bacteria, viruses, and fine particles from raw water to produce water suitable for drinking. Its modular structure allows for easy customization according to the water quality of the location where it will be used. You can select the characteristics of the raw water from four categories and build the optimal system using 11 types of modules. System construction can be easily carried out by following our classification and configuration procedures. AQpure arrives at the customer pre-assembled and fully wired. AQpure can minimize operating costs. Due to low consumption of energy and chemicals, the lifespan of UF membranes and consumable parts is extended, and there is no need for a resident manager.

400W Class Mercury Lamp Replacement LED This is an LED lighting fixture that can be used simply by removing the current mercury lamp and installing it. - 80% reduction in power consumption compared to mercury lamps - No special installation required; can be exchanged with the current mercury lamp - Integrated design of the light-emitting part and power supply - Lens replacement allows for selection of 40, 60, 80, or 120-degree beam angles - Long lifespan = LED lifespan of 50,000 hours

- Prevents fingers from bending too far back, gradually protecting against potential injuries. - Designed to prevent damage to finger joints and tissues caused by repetitive motions, such as pressing buttons hard. - Prevents cuts and abrasions from contact with sharp or rough surfaces. - Available in a wide range of sizes (each size available for thumb and other fingers). - Lightweight. - Natural wearing comfort. - DigiSkin (special material at the fingertips allows for maintaining sensitivity during delicate tasks). - DigiLock (creates natural movement while preventing excessive extension of the fingers, allowing movement within the normal range of motion). [Note] Product design changes are planned.

The portable air conditioner/Hiesspo does not require any piping work and can be easily moved with casters. It is effective in places where there is no permanent air conditioning system, in factories where specific areas become hot, or in locations that temporarily need cooling. It has a higher cooling capacity compared to typical spot coolers, with a lineup of five types ranging from 1 horsepower to 6 horsepower, including models with a maximum cooling capacity of 14.0 kW. With a Sirocco fan that can blow air over long distances, it releases cool air primarily in the direction of the airflow, making it effective in spaces that typical spot coolers cannot adequately address. It is suitable for spot cooling in factories, warehouses, construction sites, as well as for cooling break rooms, gyms, events, and golf practice ranges. In addition to cooling, Hiesspo also supports dehumidification, heating, and ventilation, making it usable throughout the year and ideal for needs that require changing locations between summer and winter.

Starting from June 1, 2025, the Labor Safety and Health Regulations will be revised, mandating heat stroke measures for businesses. This includes the establishment of a reporting system for heat stroke patients, preparation of measures to prevent deterioration, and actions to inform workers. The Spot Cooler/Hiespo is a portable air conditioner that requires no piping installation and can be easily moved with casters. It has a higher cooling capacity compared to typical spot coolers, with five models ranging from 1 horsepower to 6 horsepower, including units with a maximum cooling capacity of 14.0 kW. With a Sirocco fan that can blow air over long distances, it effectively releases cool air in a targeted direction, making it suitable for spaces that typical spot coolers cannot adequately cool. It is ideal for spot cooling in factories, warehouses, construction sites, as well as for cooling break rooms, gyms, events, and golf practice ranges. In addition to cooling, Hiespo also supports dehumidification, heating, and ventilation, making it usable throughout the year and perfect for needs that require changing locations between summer and winter.

In the field of fishing, there is always a risk of hypothermia due to falls into the sea or accidents caused by bad weather. Hypothermia is a critical issue that greatly affects survival rates during rescue operations. Rapid temperature recovery is essential. Ready-Heat generates heat without the need for a power source and supports recovery from hypothermia. 【Usage Scenarios】 - Rescue operations in maritime accidents - Measures to prevent temperature drop on fishing boats - Maintaining body temperature during emergency transport 【Benefits of Implementation】 - Reduction of death risk due to hypothermia - Improvement of survival rates in rescue operations - Mitigation of secondary damage through rapid temperature recovery

In commercial facilities, the comfort of visitors and the aesthetics of the facility are important. In particular, the artificial turf in outdoor spaces greatly influences the overall impression. Flattened artificial grass not only looks bad but also reduces cushioning, potentially diminishing user satisfaction. The Turf Keeper TKB600H uses a rotating brush to stand up the blades of artificial grass, maintaining the facility's aesthetics and providing a comfortable space. 【Usage Scenarios】 - Outdoor event spaces in commercial facilities - Grass areas in amusement parks and theme parks - Green spaces in shopping malls 【Benefits of Implementation】 - Improved appearance of artificial grass, increasing attractiveness - Restored cushioning, enhancing user satisfaction - Extended lifespan of artificial grass through regular maintenance - Operable while standing, reducing the burden on workers

At amusement parks, ensuring the safety of visitors is the top priority. In particular, proper maintenance of artificial turf is crucial to reduce the risk of slip and fall accidents. Flattened artificial turf can decrease cushioning and may not absorb impact well during falls. Additionally, the artificial turf around play equipment is an important factor for children to play safely. Our artificial turf management machine, TKB600H, helps improve safety by standing up the fibers of the artificial turf with a rotating brush, restoring its cushioning properties. 【Usage Scenarios】 - Around amusement park play equipment - Event spaces - Rest areas 【Benefits of Implementation】 - Impact reduction during falls - Increased lifespan of artificial turf - Enhanced safety

In the setup of event venues, artificial turf is an important element that balances aesthetics and safety. However, during the preparation, hosting, and dismantling of events, artificial turf can easily become damaged, and the fibers may flatten, resulting in a poor appearance. Additionally, if the infill is not evenly distributed during installation, the durability of the artificial turf may be compromised. Our artificial turf maintenance machine, TKB600H, uses a rotating brush to stand up the fibers of the artificial turf, keeping its appearance beautiful. Furthermore, it promotes the even distribution of infill during artificial turf installation, extending the lifespan of the turf. 【Usage Scenarios】 - During the setup of event venues - Maintenance of artificial turf during the event - Maintenance of artificial turf after the event 【Benefits of Implementation】 - Improved appearance of artificial turf - Enhanced durability of artificial turf - Maintenance of the aesthetic appeal of the event venue

In the kindergarten playground, a safe environment for children to play is essential. In particular, maintaining cleanliness of artificial turf is important. Inadequate maintenance can lead to dirt and bacteria breeding grounds, potentially harming children's health. Our artificial turf maintenance machine, Turf Keeper TKB600H, uses a rotating brush to lift the fibers of the artificial turf, making it easier to remove dirt. This helps maintain a hygienic environment in the playground, providing a safe space for children to play. 【Usage Scenarios】 - Maintenance of artificial turf in the playground - Cleaning of artificial turf - Filling of silica sand during artificial turf installation 【Benefits of Implementation】 - Maintains the hygienic environment of artificial turf - Protects children's health - Extends the lifespan of artificial turf

In schoolyards and sports fields, the durability of artificial turf is important. Children's active play and susceptibility to weather conditions can lead to the deterioration of artificial turf, increasing the risk of injury and potentially shortening the lifespan of the facility. The Turf Keeper TKB600H uses a rotating brush to lift the fibers of the artificial turf and restore its cushioning properties. By performing regular maintenance, the lifespan of the artificial turf can be extended, maintaining a safe and comfortable environment. 【Usage Scenarios】 - Maintenance of artificial turf in schoolyards and sports fields - Maintenance of artificial turf in futsal courts and other facilities - Filling with silica sand during artificial turf installation 【Benefits of Implementation】 - Improved cushioning of artificial turf - Extended lifespan of artificial turf - Enhanced safety - Long-term use of facilities

In maintaining the landscape of rooftop gardens, the aesthetics of artificial turf is an important factor. Flattened artificial grass not only detracts from appearance but also reduces cushioning. Regular maintenance is essential to extend the lifespan of artificial turf and keep it in beautiful condition. The Turf Keeper TKB600H lifts the blades of artificial grass with its rotating brush, maintaining a beautiful landscape. 【Usage Scenarios】 - Maintenance of artificial turf in rooftop gardens - Adjusting the texture after artificial turf installation 【Benefits of Implementation】 - Maintenance of a beautiful landscape - Improvement of artificial turf's cushioning - Extension of artificial turf's lifespan

To maintain the beauty of the park, the maintenance of artificial turf is important. In particular, the removal of fallen leaves and debris, as well as the restoration of the turf's pile, are essential for preserving its visual appeal. If proper maintenance is not performed, artificial turf can deteriorate easily, potentially compromising the overall impression of the park. Our artificial turf management machine, Turf Keeper TKB600H, uses a rotating brush to stand up the turf fibers and enhance its appearance. 【Usage Scenarios】 - Artificial turf areas in parks - Play equipment areas - Event spaces 【Benefits of Implementation】 - The turf fibers stand up, improving visual appeal - Cushioning is enhanced, increasing safety - The lifespan of the artificial turf is extended

On artificial turf tennis courts, it is important to maintain the grass fibers to ensure proper ball bounce and ease of movement for players. If the fibers become flattened, it can lead to poor ball roll and increased risk of injury due to slipperiness. Our artificial turf maintenance machine, TKB600H, uses a rotating brush to stand up the grass fibers and maintain optimal conditions. 【Usage Scenarios】 - Maintenance of artificial turf on tennis courts - Adjustment of artificial turf fibers 【Benefits of Implementation】 - Stabilizes ball bounce - Enhances player safety - Extends the lifespan of artificial turf

On a futsal court, maintaining the pile height of artificial turf is crucial for ensuring the quality of play and safety. When the pile lays down, the ball rolls poorly, cushioning decreases, and the risk of injury increases. The Turf Keeper TKB600H uses a rotating brush to stand the pile of artificial turf upright, keeping the court in good condition. 【Usage Scenarios】 - Cleaning futsal courts - Maintenance of artificial turf - Filling silica sand during artificial turf installation 【Benefits of Implementation】 - The pile stands up, improving cushioning - Extends the lifespan of artificial turf - Allows for uniform filling of infill materials

At golf courses, uniformity of artificial turf is required to maintain beautiful landscapes and a good playing environment. In particular, the condition of the turf's pile height, which affects the ball's roll and feel, is important. Uneven pile height can destabilize the ball's behavior and reduce the quality of play. The Turf Keeper TKB600H uses a rotating brush to stand up the artificial turf fibers and maintain a uniform condition. 【Usage Scenarios】 - Golf course fairways - Tee grounds - Approach practice areas 【Benefits of Implementation】 - Upright fibers for stable ball roll - Increased player satisfaction - Extended lifespan of artificial turf

In dog runs, managing odors caused by dog waste is an important issue. While artificial turf is easy to clean, it tends to accumulate odors, making regular maintenance essential. If odors persist, it can lead to decreased user satisfaction and potentially harm the health of the dogs. The Turf Keeper TKB600H uses a rotating brush to lift the fibers of the artificial turf, bringing up dirt and odor-causing substances that have settled deep within. This enhances deodorizing effects and helps maintain a clean environment. 【Usage Scenarios】 - Maintenance of artificial turf in dog runs - Odor control measures - Lifting the fibers of artificial turf 【Benefits of Implementation】 - Reduction of odors from artificial turf - Maintenance of a clean environment - Improvement of user satisfaction

Proper maintenance of artificial turf is essential to ensure player safety and the quality of play on soccer fields. In particular, flattened artificial turf can impair ball roll and cushioning, increasing the risk of injury. The Turf Keeper TKB600H effectively stands up the fibers of artificial turf with its rotary brush, addressing these issues. 【Usage Scenarios】 - Maintenance of artificial turf on soccer fields - Maintenance of artificial turf on futsal courts 【Benefits of Implementation】 - Fibers stand up, improving cushioning - Increased lifespan of artificial turf - Enhanced player safety

In evacuation centers and disaster-stricken areas, hypothermia due to cold becomes a significant problem. Especially in situations where heating facilities are inadequate, a drop in body temperature poses a serious risk to health. Hypothermia can lead to exhaustion, decreased immunity, and even life-threatening situations. Ready-Heat generates heat without the need for a power source, reducing the risk of hypothermia during evacuation. 【Usage Scenarios】 - Use in evacuation centers - Maintaining body temperature for disaster victims - Temperature management during rescue operations 【Effects of Implementation】 - Reduction of hypothermia risk - Maintenance of health for disaster victims - Increased efficiency of rescue operations

In emergency medical situations, managing a patient's body temperature is extremely important. Particularly for patients whose body temperature has dropped due to trauma or illness, it is necessary to prevent the progression of hypothermia and provide appropriate treatment. Hypothermia can lead to a deterioration in the patient's condition, requiring a swift response. Ready-Heat generates heat without the need for a power source and is useful for preventing hypothermia during emergency transport and disaster relief. 【Usage Scenarios】 - During emergency transport - During disaster relief - Maintaining warmth before and after surgery 【Benefits of Implementation】 - Reduced risk of hypothermia - Stabilization of the patient's condition - Realization of rapid temperature management

In mountaineering, hypothermia is a serious risk that can be life-threatening. Especially during bad weather or unexpected emergencies, the drop in body temperature can accelerate, making appropriate measures urgent. Ready-Heat is self-heating and does not require a power source, allowing for rapid warming of body temperature. It helps reduce the risk of hypothermia in case of emergencies while climbing. 【Usage Scenarios】 - Breaks during bad weather - Maintaining body temperature during emergencies - Cold protection during bivouacking - Keeping injured individuals warm 【Benefits of Implementation】 - Reduction of risks associated with hypothermia - Increased survival rates in emergencies - Rapid recovery of body temperature - Compact and convenient for carrying

At construction sites, outdoor work is common, and the risk of hypothermia increases due to changes in weather and temperature. Particularly during winter work or when rescuing injured individuals from accidents, prompt temperature management is essential. Ready-Heat generates heat without the need for a power source, protecting workers' safety from the risk of hypothermia. 【Usage Scenarios】 - During breaks while working outdoors on construction sites - First aid for injured individuals during accidents or disasters - Work in cold regions 【Benefits of Implementation】 - Reduction of health risks due to hypothermia - Ensuring the safety of workers - Quick response in emergencies