TOEI KAISHA, LTD. List of Products and Services

■By installing two vertical multistage centrifugal pumps in series and adopting a special motor for reverse thrust, we have achieved a high pressure of 4.4 MPa, which has traditionally been difficult with centrifugal pumps. ■This is an ideal high-pressure pump that simultaneously resolves issues commonly associated with plunger pumps, such as noise problems, equipment fatigue due to pulsation, and high maintenance costs due to the short lifespan of key components.

• Other pumps

All major parts of the pump section are made of titanium, which is lightweight, strong, and boasts extremely high corrosion resistance. It is suitable for applications involving the transfer and pressurization of highly corrosive liquids, including seawater.

• Other pumps

The deep well water pump inverter automatic operation unit SPCP provides stable discharge pressure and energy savings through constant water supply with inverter operation, as well as the advantage of reduced installation space. Additionally, the flow switch quickly detects low flow (below 10L/min) and stops operation, preventing unnecessary running. The pump and motor are made of stainless steel (SUS304), and the piping of the automatic operation unit and the above-ground components (including the curved well cover) are also standardly made of stainless steel casting (SCS13), offering excellent weather resistance and corrosion resistance.

• Other pumps

The standard CR pumps, which have a wide range of products, are suitable for almost all industrial solutions. Additionally, their modular structure allows for a broader range of applications. The standard CR pumps are available in four materials: cast iron, two different types of stainless steel, and all titanium. They come in 11 different flow ranges, with a maximum pressure of 50 bar, various shaft seals, rubber materials, and supply voltages. The components of the pumps are affected by various liquids or harsh operating conditions, but they can be optimized for specific applications and designed for special requirements.

• Other pumps

The SQE3 inch submersible pump allows you to choose a model that meets your individual requirements across a wide range of performance. It is a compactly designed 3-inch multi-stage centrifugal pump that can be installed in boreholes smaller than the pump dimensions. The SQE pump has built-in electronic components, making installation and operation very simple, and we guarantee reliable and stable water supply. The pump, equipped with a permanent magnet motor, features a flexible and compact design, ensuring excellent efficiency and accommodating lift heights of up to 200 meters. By using the "SQEP," which combines the SQE pump with a surface control unit, you can achieve constant pressure water supply.

• Other pumps

The SQ Flex pump is an environmentally friendly water supply solution equipped with a permanent magnet motor that efficiently utilizes natural energy. It provides a perfect water supply solution for remote areas with water shortages and no or unstable power supply. The SQ Flex is a complete intelligent system that goes beyond just a pump. The pump has built-in electronic components, allowing it to operate on DC power without the need for an external conditioner. You can choose from 10 different pump sizes. The 4 types of helical rotor pumps are suitable for applications requiring high lift, while the 6 types of vortex pumps are designed for applications requiring high flow rates.

• Other pumps

The SP submersible pump product range is renowned for its high efficiency and reliability. All SP pumps are made of corrosion-resistant stainless steel and can be used for various applications. The SP pumps are manufactured with cutting-edge fluid design to provide optimal efficiency during peak demand. They also promise long-term cost savings and reliable operation for all applications. Features of the SP product range include high efficiency, motor burn-out protection (through a combination of sensors and protective devices), and easy maintenance. A complete monitoring and control system allows for continuous optimization of the pump system.

• Other pumps

The UPA series is a home mini booster designed and developed under a refined design policy. The adoption of a seal-less structure eliminates concerns about water leakage and maintenance. Additionally, the canned motor keeps the noise generated by the pump below 40 dB. It features an all-in-one design with a flow switch, union, and power cable all included as standard equipment.

• Other pumps

■Single suction pumps are used in applications such as water supply, industrial boosting, industrial liquid transfer, HVAC (heating, ventilation, air conditioning), and irrigation. ■The single suction pump is a versatile pump that is highly reliable, cost-effective, and capable of handling various applications, primarily used in five areas: water supply, industrial boosting, industrial liquid transport, HVAC (heating, ventilation, air conditioning), and irrigation. ■NB/NBG pumps are non-self-priming single-stage centrifugal volute pumps equipped with a suction inlet on the shaft side, a discharge outlet on the top, and a horizontal shaft, designed as direct-coupled pumps that conform to the main dimensions of the EN733 or ISO2858 standards.

• Other pumps

■ The UPS pump has a circulator pump with three speeds (50Hz and 60Hz). ■ These pumps can be used in both open and closed systems. The pump and motor form an integrated unit with two gaskets instead of a shaft seal, and they are of the canned rotor type. Additionally, the bearings are lubricated with the conveyed liquid. ■ Designed for liquid circulation in heating and air conditioning systems. Pumps with copper or stainless steel housings can also be used in hot water service systems.

• Other pumps

■Grundfos TP and TPE vertical inline pumps can be used for various applications. All pumps are single-stage inline centrifugal pumps equipped with standard motors and mechanical shaft seals. These are close-coupled pumps where the pump and motor are independent units. Compared to similar canned rotor pumps, they have the advantage of being unaffected by impurities in the conveyed liquid. ■There are two models of vertical inline pumps. We offer a wide range of special product options for each model. 【TP Pump】 This pump is characterized by excellent reliability and high efficiency. For models with 7.5KW 4P and 11KW 2P or higher, a quiet IE2 motor with high-efficiency operation is standard. The pump body of the TP pump is all coated with electrodeposition paint, ensuring excellent corrosion resistance. 【TPE Pump】 The main difference between the TP pump and the TPE pump is the motor. The TPE motor has a built-in frequency converter, allowing for different control methods to be applied. The TPE pump saves energy and improves comfort.

• Other pumps

- Ducted air blowing is possible with clean hot air. - Stacking storage is possible (HS290L1: 3 tiers, HS290-L1T80: 2 tiers). - Equipped with a large-capacity oil tank (80L), allowing for 18 hours of continuous operation (HS290-L1T80).

• air conditioning

- Air blowing operation Can operate with air blowing only. - Alarm monitor Notifies the operation status of safety devices via lamps or error codes. - Earthquake (earthquake automatic extinguishing) Automatically extinguishes in the event of a strong earthquake or shock. - Ignition (ignition safety) Automatically extinguishes in cases of ignition failure, mid-operation extinguishing, abnormal combustion, or fuel depletion. - Power outage (power outage safety) Prevents automatic operation from starting even after power is restored following a power outage. - Overheating prevention Automatically extinguishes when the heater's interior overheats abnormally. - Overload (overload protection) Stops operation by cutting off the electrical circuit in the event of an overcurrent. - High voltage (high voltage stop) Stops operation when the power supply voltage becomes abnormally high during operation. - Low voltage (low voltage alarm) Issues an alarm when the power supply voltage is abnormally low.

• air conditioning

The warm air jet heater is different from the infrared type; it is a heater that uses a fan to distribute the heat from the burner. Due to its convection method, it is particularly effective for drying applications.

• air conditioning

The warm air jet heater is different from the infrared type; it is a heater that uses a fan to distribute the heat from the burner. Due to its convection method, it is particularly effective for drying purposes. There is also an energy-saving type that reduces kerosene consumption.

• air conditioning

We have achieved efficient low fuel consumption by reducing fuel consumption during weak combustion. The position of the control panel has been raised, improving visibility and ease of use. The individual alarm monitor allows for immediate identification of the cause of safety device activation. It features a large-capacity tank that can sustain combustion for over 10 hours.

• air conditioning

The warm air jet heater is different from the infrared type; it is a heater that uses a fan to distribute the heat from the burner. Due to its convection method, it is particularly effective for drying applications. The odor during ignition has been significantly reduced to less than 1/5 (compared to the same company). It is also ideal for interior-related spaces of 10 tsubo or more.

• air conditioning

Equipped with a rotary gasification burner, it operates quietly with a sound level below 58 dB. Weighing only 11.5 kg, it is easy to transport (when the tank is empty) and features a clearly visible warning lamp that minimizes the risk of kerosene spilling during transport or if it tips over.

• air conditioning

Jet heaters are used not only for outdoor and indoor heating in schools, gymnasiums, golf practice ranges, tennis courts, driving schools, funeral homes, event venues, logistics warehouses, factories, and greenhouses, but also for drying purposes such as painting and curing concrete at construction sites. They can be stacked for storage, so they do not take up space during the off-season.

• air conditioning

It can be used not only for outdoor and indoor heating but also for drying in construction site painting and concrete curing. It is also well-received as graduation commemorative gifts and PTA donations. It is a general-purpose type that takes into account the introduction cost. It comes standard with six types of safety devices and alarm monitors.

• air conditioning

Quiet operation sound (combustion and airflow at minimum: 58db) with wide heating at 30 degrees to the left and right. Combustion and airflow levels can be adjusted in five stages. We have thoroughly pursued the longevity of the automatic oscillation mechanism. (3-year warranty on the oscillation mechanism *Excludes failures due to improper handling or natural disasters.)

• air conditioning

Jet heaters are used in schools, gymnasiums, golf practice ranges, tennis courts, driving schools, funeral homes, event venues, logistics warehouses, factories, and greenhouses. With the double power of infrared and warm air, they provide wide warmth with low fuel consumption.

• air conditioning

- Stacking (Stacking Storage) When stored, it can be stacked in three layers. - Long Duration (Long Duration Combustion) When the oil tank is full, combustion lasts for over 14 hours. - 3P Cord It is a power cord compatible with both 2P and 3P (Pockin plug). - Alarm Monitor It notifies the operation of safety devices via a lamp or error code. - Earthquake Resistance (Earthquake Automatic Extinguishing) It automatically extinguishes in the event of a strong earthquake or shock. - Ignition (Ignition Safety) It automatically extinguishes in cases of ignition failure, mid-combustion extinguishing, abnormal combustion, or running out of oil. - Power Outage (Power Outage Safety) It prevents automatic operation from starting even after power is restored following an outage. - Overload (Overload Protection) If excessive current flows, it cuts off the electrical circuit and stops operation. - High Voltage (High Voltage Stop) Operation stops when the power supply voltage becomes abnormally high during operation. - Low Voltage (Low Voltage Alarm) An alarm is triggered when the power supply voltage is abnormally low.

• air conditioning

The Jet Heater/Eco Silence HRR480B-S is an eco-friendly heater that provides more warmth with less fuel, considering both energy conservation and CO2 reduction. With the automatic eco operation feature and the newly added thermo operation function, it achieves approximately 38% energy savings. Efficient radiation panels and burner heating allow it to provide the same warmth as conventional models while using 30% less kerosene. With an operating noise level of 53 to 57 dB, it is also ideal for quiet places. Compared to electric heaters, it excels in both energy conservation and CO2 reduction, making it a cost-effective heater with low running costs.

• air conditioning

■ Lightweight, space-saving, and energy-efficient without a power supply. The main unit requires no power and weighs only 10kg (for ODF5-W1). Achieves zero floor space by being wall-mounted. Running cost is 6.3 yen/L. ■ Uses an element-based system for consumable replacement. Easy and reliable for anyone. Element replacement time is 6 minutes. Can be replaced during lunch breaks. ■ Various ways to use it. For equipment with low operating frequency. As a "pre" drain processing unit for existing equipment.

• Wastewater/wastewater treatment equipment

■ Measurement/display of the dew point (at atmospheric pressure) and temperature of the refrigerated air dryer is possible (digital display of conventional refrigerant pressure and compressed air cooling temperature). ■ Standard analog output equipped (single output). ■ Slim and compact (62% volume ratio of MG40A-P). ■ External communication function allows management of up to 8 units via PC (optional feature).

• Other air conditioning equipment

【MG40 (For Atmospheric Air Only)】 - Simultaneous display of temperature, humidity/dew point (humidity/dew point can be switched). - Dew point/humidity alarm output standard equipment (with two non-voltage contacts). - Standard analog outputs (temperature, humidity/dew point: DC output). 【MG40A-P (For Compressed Air Only)】 - Simultaneous display of temperature, humidity/dew point (humidity/dew point can be switched). - Dew point/humidity alarm output standard equipment (with two non-voltage contacts). - Standard analog outputs (temperature, humidity/dew point: DC output).

• Temperature and humidity measuring instruments

■When the instantaneous air consumption exceeds the total discharge amount of the air compressor. ■When using two or more air compressors to average the load rate. ■In front of a heatless air dryer.

• Other air conditioning equipment

■The tank is made of SUS304 material. The surface of the tank is finished with paint (metallic silver). The plugs for the cleaning and inspection holes are made of FC material. We also accept orders for SUS specifications, so please feel free to inquire. ■Ideal for industries such as food, medical, and semiconductor, where rust is undesirable.

• Other air conditioning equipment

■ Uses a special spiral tube, demonstrating excellent heat transfer capability 2 to 3 times that of bare tubes. ■ Adopts a self-cleaning (self-purification) method.

• air conditioning

■Ideal for heatless dryers. ■Adopts a wide-pitch condenser that is easy to maintain.

• air conditioning

■Ideal for 11 to 150 kW air compressors. ■Adopts a wide-pitch condenser for easy maintenance. ■Uses wave-shaped fins. The thin heat exchanger with good heat transfer efficiency has a large air contact area, demonstrating excellent cooling capability. ■Special fan adopted to minimize air flow unevenness.

• air conditioning

【Motor Valve Type Drain Trap: ADE-2-B/3-B】 ■ Automatically discharges drain with water detection sensor. ■ Discharge cycle time can be set with variable timer (ADE-3-B). 【Float Type Drain Trap: FD2/2-NC/5/6-G3/10-A】 ■ Discharges drain without air loss (FD2・5・6・10-A). 【Disk Type Drain Trap: AD-5-G1】 ■ Discharge interval is variable.

• Wastewater/wastewater treatment equipment

【Timer-type Drain Trap: ADE4B】 - The discharge interval can be set with a variable timer. - Equipped with an energy-saving function that automatically controls the discharge interval based on ambient temperature detection. - Significantly reduces clogging of sludge and other materials by adopting a large-diameter orifice solenoid valve. - Equipped with a freeze prevention function that automatically shortens the discharge interval during low temperatures. 【Electromagnetic Drain Trap: ADE300】 - Equipped with a capacitive liquid level sensor. - Prevents clogging of foreign objects by adopting a large-diameter orifice solenoid valve. - Remote management is possible (operating signal and alarm signal are standard features).

• Wastewater/wastewater treatment equipment

■No power supply is required at all. ■Adopts a variable type that allows adjustment of the discharge temperature and airflow of cold air. You can achieve the optimal combination of cold air temperature and discharge volume according to the cooled object and various working conditions. ■Long lifespan.

• Air purifiers

■No power supply. ■Equipped with a dew point indicator for checking dehumidification status. ■No vibration, no heat discharge, and easy maintenance. ■No drain generation. The removed moisture is discharged as water vapor, so no drain is generated. ■Compact, lightweight, and space-saving (compared to our refrigerated air dryers). Approximately 1/5 the installation space and less than 1/10 the weight.

• Air purifiers

■Simply set it in the duct to easily supply dehumidified air. The unique expansion separation method achieves lightweight and compact design. Furthermore, since it does not require a power supply, you can easily provide dehumidified air. ■Unique structure that follows flow rate fluctuations. It ensures reliable dehumidification performance even during fluctuations in flow rate and pressure, making it ideal for air management at the end point. ■Achieves maintenance-free operation. There is no clogging since no filters are used. Additionally, the drain is automatically discharged from the auto drain trap.

• Air purifiers

■ Four types: for water droplet and solid removal, for solid removal, for oil mist removal, and for odor removal. (A total of 20 models are available) ■ Can be connected with a tie rod, allowing for reduced piping space (optional support available)

• Air purifiers

■High-precision filtration. Removes particles of air cleanliness ISO 14644-1 Class 3 (F.S. 209D Class 1). ■Compact and lightweight. ■Easy maintenance. Features a cartridge-type filter that is easy to replace.

• Air purifiers

■Achieves high cleanliness of compressed air. ■Capable of precise filtration at 0.5μm. ■Casing is finished with SUS polishing, and the element uses PTFE membrane or fiberglass. ■Standard equipped with an outlet particle measurement port.

• Air purifiers

Orion Machine's compressed air filters (compressed air purifiers) allow you to choose from various filters tailored to different removal levels for water droplets, solids, oil mist, odors, and more in compressed air.

• Air purifiers

■Cooling is achieved simply by placing the cooling coil in the tank. ■Lightweight design allows for easy movement and installation. ■Uses cooling coils with excellent chemical resistance (two types: SUS304 and titanium). ■By installing a liquid temperature controller (optional), constant temperature control is possible.

• Temperature and Humidity Control

You can choose from various filters tailored to the removal levels of water droplets, solids, oil mist, odors, and more in compressed air.

• Air purifiers

Orion's compressed air filters (compressed air purifiers) allow you to choose from various filters tailored to different removal levels for water droplets, solids, oil mist, odors, and more in compressed air.

• Air purifiers

Compressed air filters (compressed air purifiers) allow you to choose from various filters tailored to different removal levels for water droplets, solids, oil mist, odors, and more in compressed air.

• Air purifiers