ツールシステム List of Products and Services

Multi Stopper MS1512-MS1516 Super Tool ● The guide bolt can be adjusted within a range of 50mm. ● By loosening the pivot bolt of the guide section, it can swing 180° and be fixed at any desired position. ● By loosening the body fixing bolt, the guide section can be mounted horizontally at a 90° angle for use. ● Material: S45C Finish: Black oxide.

• Vice Clamps
• Other work tools

Receiving screw CB40-50-60-80 Super Tool This is a receiving screw for TPS, TPU, FPB, and FGB. ● Material: S45C, heat-treated, finish: black oxide.

• Vice Clamps
• Other work tools

Swivel pad bolt CHS3000 to CHS8000 Super Tool ● This is a receiving screw with a swivel pad for TPS TPU FPB8 FGB. ● Material: S45C Finish: Black oxide

• Vice Clamps
• Other work tools

Magnet-equipped precision parallel set step type PPP160MSA Super Tool ● By attaching a magnet to the precision parallel for magnets, it can be fixed to the jaws of the vice. ● Due to the magnetic attraction, during workpiece replacement, this product does not easily come off the jaws, allowing for smooth operation. (Comes in a wooden case)

• Vice Clamps
• Other work tools

Magnet-equipped Precision Parallel Set Step Type PPP160MSB Super Tool ● By attaching a magnet to the precision parallel for magnets, it can be fixed to the jaws of a vice. ● Due to the magnet's attraction, during workpiece replacement, this product does not easily come off the jaws, allowing for smooth operation. (Comes in a wooden case)

• Vice Clamps
• Other work tools

Magnet-equipped Precision Parallel Set Step Type PPP200MSA Super Tool ● By attaching a magnet to the precision parallel for magnets, it can be fixed to the jaws of the vice. ● Thanks to the magnet's adhesion, during workpiece replacement, this product does not easily come off the jaws, allowing for smooth operation. (Comes in a wooden case)

• Vice Clamps
• Other work tools

Magnet-equipped precision parallel set step type PPP200MSB Super Tool ● By attaching a magnet to the precision parallel for magnets, it can be fixed to the jaws of a vice. ● Thanks to the magnet's adhesion, during workpiece replacement, this product does not easily come off the jaws, allowing for smooth operation. (Comes in a wooden case)

• Vice Clamps
• Other work tools

Parallel Magnet Holder (1 piece) PMH16 Super Tool ● Material: Special alloy steel (neodymium) Finish: Electroless nickel plating ● Precision parallel set for magnets, compatible with individual items

• Vice Clamps
• Other work tools

Thin Precision Parallel Table Set Flat Type PPP160FA～PPP200FB Super Tool ● Height adjustment of the vice jaw ● Precision machining for reference setting ● Surface processing of small workpieces ● Ideal for through hole machining ● Comes in a wooden box ● Four sides polished, except for both end faces, with particularly precise grinding finish on the top and bottom sides (parallelism within 0.005)

• Vice Clamps
• Other work tools

Thin Precision Parallel Table Set Step Type PPP125SA～PPP200SB Super Tool ● Height adjustment of the vice jaws ● Convenient for precision machining for reference ● Surface machining of small workpieces ● Through hole processing is possible at a position close to the workpiece end face ● Comes in a wooden box ● Four sides polished, except for both end faces, with particularly precise grinding finish on both upper and lower surfaces (flatness within 0.005)

• Vice Clamps
• Other work tools

Clamp Support SPCS8 to SPCS24 Super Tool ● This clamp support greatly increases the efficiency of clamping work. ● By simply loosening the flange nut, the clamp returns to its original position naturally. ● This clamp support is particularly convenient when used with various clamps. ● Material: S45C and SWP Finish: Black oxide.

• Vice Clamps
• Other work tools

Screw Support Long Stroke Type (Set of 2) SCREW SUPPORT LONG STROKE Super Tool - Material: S45C - Heat Treatment: Quenching HRC 35-47 - Finish: Black Oxide - Please use support chips for uneven surfaces and irregularly shaped workpieces.

• Vice Clamps
• Other work tools

Magnetic Screw Support Long Stroke Type (Set of 2) Three-part structure: main body, intermediate male screw, and upper receiving male screw SCREW SUPPORT LONG STROKE Super Tool - The magnetic force, which can be used for horizontal and vertical jigs, is built into the bottom surface of the main body. - Material: S45C • Heat treatment: Quenching HRC35-47 • Finish: Black oxide - Please use support chips for uneven surfaces and irregularly shaped workpieces.

• Other work tools
• Vice Clamps

Adjustable Mini Block Super Tool AMB20 AMB26 AMB20M AMB26M (with magnet) Features Ideal for preventing workpiece vibration and leveling. Due to its low height, it can accommodate spaces below 30mm where screw supports cannot fit. Can be used in recessed areas due to side operation. Despite its small size, it has a high jacking capacity. The version with a magnet does not shift position due to vibrations.

• Other work tools
• Vice Clamps

Spring Mini Support - Super Tool SPRING MINI SUPPORT SMS18 SMS30 SMS18M SMS30M (with magnet) Features Ideal for preventing workpiece vibration with built-in spring. Supports the workpiece in a natural state without deformation. Can be used as a dedicated low-height fixture or as a general-purpose tool. Spring adjustment can be made from both the top and bottom. The shaft material is SK steel with a hardness of 60 HRC. Both the body and surface are treated with electroless nickel plating to enhance surface hardness and rust resistance. The version with a magnet does not shift position due to vibration.

• Other work tools

Parallel block set (steel parallel) HGP125S HGP150S HGP200S Super Tool ● Material: S45C ● Heat treatment: Hardening HRC40-45 ● Finish: Grinding ● Parallelism: Dimension A within 0.013 Dimension B within 0.01 Features ● Four sides, excluding both end faces, are finished by grinding ● This parallel block is necessary for adjusting the height of the vice jaw and for establishing a reference for the workpiece.

• Tool Sets
• Other work tools

Magbar MGB600S-900S-1200S Super Tool Applications ● Removal of chips and sludge from narrow spaces such as machine table grooves and vice gaps. ● Removal of chips and sludge from water and oil tanks. Features ● Excellent suction power due to strong magnetism. ● The rod shape makes it ideal for removing metal scraps and sludge from hard-to-reach areas under machines. ● Removal of adhered materials is a one-touch operation by simply pulling the sliding handle.

• Other work tools
• Other safety and hygiene products

Mag Sludge Cleaner MGC100-MGC300 Super Tool Uses ● Purification and cleaning of water tanks and oil tanks in hydraulic units, oil tanks, and machines (wire cutting, electrical discharge machines, machining centers), etc. Features ● Installation is as simple as submerging it in water or oil tanks. ● The wave-patterned magnets attract more chips and sludge. ● The adhered chips and sludge can be easily removed by simply removing the cover. ● Removing the cover is easy; just pull the upper and lower rings, even with strong adhesion.

• Other work tools
• Other cleaning tools

Magpen Bar MGB556 Super Tool ● Type without light of MGB570L. (Comes in a plastic case)

• Other work tools
• Other safety and hygiene products

Super Standard Magnet Rod Permanent Magnet Ferrite Super Tool Applications ● Ideal for removing iron from raw materials such as powders, granules, and liquids. ● Removal of iron powder and other contaminants in manufacturing processes for food, pharmaceuticals, chemicals, etc. Features ● Versatile single unit that can be integrated into lattice types for a wide range of applications. ● Waterproof structure achieved through special welding allows for use in liquids. ● Customizable to required lengths, diameters, and magnetic strengths. ● Can be used in front of discharge filters. ● Outer pipe. ● Material: SUS304 Surface finish: #200 buff finish Operating temperature: ≤80℃

• Other work tools
• Other inspection equipment and devices
• Other safety and hygiene products

Super Sanitary Mag Bar (Double Tube) (Permanent Magnet, Nd Series Rare Earth) Super Tool High magnetic force and high airtightness. High quality and finish. Applications ● Ideal for removing iron when there is a relatively high amount of iron powder mixed in. Features ● Waterproof structure with high-quality finish achieved through special welding in sanitary specifications. ● The double tube structure allows for easy adsorption without dirtying hands by simply pulling out the magnet bar, making it easy for iron powder to detach. ● All grip parts are made of stainless steel. ● Versatile standalone unit that can be integrated for a wide range of applications. ● Can accommodate required lengths, diameters, and magnetic forces. ● Outer pipe ● Material: SUS316L Surface finish: #400 buff finish *Operating environment temperature ≦80℃ *Maximum surface magnetic flux density: 0.8T (8,000G) *Internal permanent magnet characteristic value: 1.35T (13,500G) *Tap hole: M6×8

• Other inspection equipment and devices
• Other work tools
• Other safety and hygiene products

Super Sanitary Mag Bar (Permanent Magnet, Nd Series Rare Earth) Super Tool High magnetic force and high airtightness. High quality and finish. Applications ● Adsorbs and removes fine iron powder and stainless steel wear powder from powders and granules using high magnetic force magnets. ● Ideal for foreign matter removal in manufacturing processes of food, pharmaceuticals, and chemicals. Features ● Waterproof structure with high-quality finish through special welding in sanitary specifications. ● Versatile application with standalone units that can be easily integrated. ● Customizable to required lengths, diameters, and magnetic forces. ● Outer pipe ● Material: SUS316L Surface finish: #400 buff finish *Operating environment temperature ≦80℃ *Maximum surface magnetic flux density: 1.2T (12,000G) *Internal permanent magnet characteristic value: 1.43T (14,300G) *Tap hole: M6×8

• Other work tools
• Other inspection equipment and devices
• Other safety and hygiene products

Super Sanitary Mag Bar (Permanent Magnet, Nd Series Rare Earth) Super Tool High magnetic force and high airtightness. High quality and finish. Applications ● Adsorbs and removes fine iron powder and stainless steel wear powder from powders and granules using high magnetic force magnets. ● Ideal for foreign matter removal in manufacturing processes of food, pharmaceuticals, and chemicals. Features ● Waterproof structure with high-quality finish through special welding in sanitary specifications. ● Versatile applications as a standalone unit that can be easily integrated. ● Customizable to required length, diameter, and magnetic force. ● Outer pipe ● Material: SUS316L, Surface finish: #400 buff finish *Operating environment temperature ≦80℃ *Maximum surface magnetic flux density: 0.8T (8,000G) *Internal permanent magnet characteristic value: 1.35T (13,500G) *Tap hole: M6×8

• Other work tools
• Other inspection equipment and devices
• Other safety and hygiene products

Sanitary Magnet Straight Element SMGE-10 to SMGE-20 Super Tool ● Effective in areas with low processing capacity (flow rate) suitable for mayonnaise, seasoning liquids, etc. ● Simple structure allows for easy separation and cleaning. ● Compact design takes up minimal installation space. ● Sanitary specifications suitable for food and pharmaceuticals. ● Custom sizes beyond the dimension table are also available. Delivery time... Depending on the product, delivery may take 2 to 3 weeks. Please inquire about custom items as well. Surface finish. The method of attaching the magnet will be determined after sufficient discussion.

• Other work tools
• Other inspection equipment and devices
• Other safety and hygiene products

Sanitary Magnet Cross Pipe SMGOS1525～3525・SMGOSH1525～3525 SMGOSS1520～3520 Super Tool ● Installed in the pipe transport route between processes for high-viscosity foods such as juice, ham, sausage, jam, minced meat, seasonings, dairy products, and miso, it attracts magnetic fine powder with a powerful magnet to enhance the process. ● It is designed to be sanitary, suitable for food and pharmaceuticals. ● The structure minimizes liquid accumulation at the bottom. ● Double pipes can also be manufactured. ● Sizes other than those in the dimension table can also be produced. Delivery time... Depending on the product, delivery may take 2 to 3 weeks. Please inquire about custom products as well. Surface finish. The method of attaching the magnet will be produced after sufficient discussion.

• Other safety and hygiene products
• Other cleaning tools

Sanitary Magnet Cross Pipe SMGS1525～3525・SMGSH1525～3525・SMGSS1520～3520 Super Tool ● Installed in the piping route between processes for high-viscosity foods such as juice, ham, sausage, jam, minced meat, seasonings, dairy products, and miso, it attracts magnetic fine particles with a powerful magnet to enhance the process. ● It is designed to be sanitary, suitable for food and pharmaceuticals. ● Double pipes can also be manufactured. ● Sizes other than those in the dimension table can also be produced. Delivery time... Depending on the product, delivery may take 2 to 3 weeks. Please inquire about custom products as well. Surface finishing. The method of attaching the magnet will be produced after sufficient discussion.

• Other safety and hygiene products
• Other cleaning tools

Grid Magnet Housing with SSMGU1100A to SSMGU3300A Super Tool ● Depending on the pipe diameter and processing capacity, it can be attached to air pressure supply lines or pipe ducts to effectively attract fine iron powder mixed in raw material streams or chemical powders using a powerful magnet. ● The magnet can be removed through the opening and closing door on the front of the housing, allowing for the cleaning of foreign substances attached to the magnet. ● A double-tube design that facilitates easy cleaning is also available. ● Material: SUS304 (SUS316/SUS316L can also be manufactured). ● Surface finish: *Internal and external surfaces buffed to #400. ● Magnet installation example: *Fully welded. *Internal surface buffed to #400; external surface can also be acid washed. *Screw fastening and one-sided welding (cantilever) are also possible. *Surface magnetic flux density of 0.8T, 1.2T, and 1.3T can also be produced. Delivery time: Depending on the product, delivery may take 2 to 3 weeks. Please inquire about custom products as well.

• Other work tools
• Other safety and hygiene products

Pipe Bender Attachment (Bend Shoe) SPB10AN-15AN-20AN-25AN Pipe Bender (Hydraulic Type) SPB520N-1025N SUPER TOOL - Bending processing of thick-walled (JIS standard) stainless steel pipes, gas pipes (JIS), water pipes, and electrical conduits (0° to 90°) - Comes with three types of attachments (bend shoes) suitable for bending processing. - Compatible with our (Super Tool) manual pump. [Accessories] - Attachments (Bend Shoes) SPB520N (10AN, 15AN, 20AN) SPB1025N (15AN, 20AN, 25AN) - Hexagonal rod (M4) for attachment mounting stop screw.

• Other work tools

Hydraulic Hose ● Can be used with all manual pumps. ● Includes one coupling HCF (female) for cylinder side attachment as a service item.

• Other work tools

Aluminum Hydraulic Pump (Single Acting Cylinder) HP500A-1000A Super Tool ● Since it is made of aluminum, its weight is about half that of a steel pump. ● It is a discharge type pump with automatic switching between high pressure and low pressure in two stages.

• Other work tools

Hydraulic coupling HCM (male) HCF (female) Super Tool ● Generally used to connect a cylinder and high-pressure hose, with HCF (female) attached to the cylinder side and HCM (male) attached to the hose side.

• Other work tools

Hydraulic Cylinder (Single Acting) HC5S15 to HC25S100 Super Tool ● It is a single acting type with a built-in spring, allowing for reciprocation with a single high-pressure hose. ● Designed to minimize the minimum height as much as possible.

• Other work tools

Power Pusher SW 8N - SW16N POWER PUSHER Super Tool - When it is difficult to pull out gears, pulleys, etc. due to rust, seizure, etc., please use it as shown in the diagram. You can easily perform the pulling operation with the hydraulic pressure of the Power Pusher. - It can be used for various purposes as a compact, lightweight high-power jack.

• Other work tools

Hydraulic Puller Cylinder GPC-1012-1518-24 Adapter for Cylinder GLA12S-12L-18S-18L-24 Super Tool - The gear puller you are currently using can be utilized as a hydraulic puller. - Please use the gear puller with long claws (GLJ) set.

• Other work tools

Hydraulic Pump GPP-450 GPP-700 GP Oil GP-50-1000 Hydraulic Pump Super Tool

• Other work tools
• Vice Clamps

3-Claw Hydraulic Puller Set GTP-10-12-15-18 3 CLAW HYDRAULIC PULLER SET Super Tool - Due to rust and seizure, pulling gears, pulleys, etc. is made easy with hydraulic power. - The 3-claw design provides more stable setup. - Accessories include one ratchet wrench with grip (RHG).

• Other work tools

Pipe Bender (Hydraulic) SPB520N-1025N Super Tool - Bending of thick-walled (JIS standard) stainless steel pipes, gas pipes (JIS), water pipes, and electrical conduits (0° to 90°) - Comes with three types of attachments (bend shoes) for bending operations. - Compatible with our (Super Tool) manual pump. [Accessories] - Attachments (bend shoes) SPB520N (10AN, 15AN, 20AN) SPB1025N (15AN, 20AN, 25AN) - Hexagonal rod (M4) for attachment mounting stop screws.

• Air Tools
• Other work tools

Hydraulic Pipe Bender Pump Set (Manual Type) Super Tool - Applicable pipe wall thickness: SPB520NPS = 2.3 to 10mm - SPB1025NPS = 2.8 to 15mm - Includes 3 attachments (bend shoes) - Bending processing of thick-walled (JIS standard) stainless steel pipes, gas pipes, water pipes, and electrical conduits (up to 90°) - By attaching the appropriate attachment (shoe) for the pipe, it ensures accurate bending processing without damaging the pipe.

• Other work tools

Vacuum Chuck SVA2025 SVA2540 Super Tool Applications and Features ● Instantly adsorbs and secures workpieces using air from a compressor. It can be used with machine tools such as machining centers and grinders. ● Since it uses a vacuum ejector, a dedicated vacuum pump is not required (integrated type). ● It can be used simply by inserting a quick-connect tube into the compressor in the factory. ● Due to air adsorption, it is optimal for non-magnetic materials such as stainless steel, aluminum, and resin. ● When the valve is OFF, a small amount of air escapes from the Φ1 vacuum hole, making it difficult for foreign objects to enter the air circuit. ● Most components are consolidated on the front panel, making maintenance such as part replacement easy. ● It has a built-in pressure reducing valve, allowing for adjustment of the adsorption force and eco-friendly use by reducing air consumption. ● It is equipped with hex socket bolt mounting holes, enabling parallel use. *For installation on machine tables, please use our clamp fixture Solid Clamp. Parallel Use (Custom Order Support) ● When using in parallel, please use commercially available hex socket bolts and washers for the connecting parts.

• Vice Clamps
• Other work tools

Vacuum Generator SVAG12 Super Tool Features ● Lightweight and compact ● Built-in pressure reducing valve and chuck valve ● Adjustable air pressure type ● Maximum suction flow rate: 12ℓ/min ● Usable with factory compressors ● Simply connect to a separately made vacuum plate Size ○ Depth (approximately 80mm) × Width (222mm) × Total Height (160mm) Accessories ○ Two-layer tube (approximately 1.5m) ○ Single-layer tube (approximately 0.5m) ○ One-touch pipe joint coupler (1 piece)

• Vice Clamps
• Other work tools

MC Two-Sided Jig Block Lightweight Low-Cost Type BRV44515 to BRV68025 Self-Cut Type Super Tool Features Low-Cost Type Bottom and Edge Locator Parts Machined Finish Users can process tap holes and other operations with their machines. Specifications Material: FC300 Heat Treatment: Annealed Finish: Floor Surface, Locator Surface: Machined Finish Rising Surface: Machined Finish (Self-Cut Type) Product Specs: Total of 6 Sizes

• Vice Clamps
• Other work tools

MC 4-Sided Jig Block - Lightweight Low-Cost Type BSV44525 to BSV68035 - Self-Cut Type Super Tool Features Low-Cost Type Machined finish on the bottom and edge locator parts Users can process tap holes and other operations with their own machines.

• Vice Clamps
• Other work tools

Free Vice Economy Type FV350E-450E-550E (set of 2) Super Tool ● Please use this free vice when the workpiece is too large to be mounted with a vice or similar tool. ● The bottom surface of the main body is machined with key grooves to accommodate step keys. ● Material: S50C Finish: Black oxide / The jaws are finished by grinding.

• Vice Clamps

Slide Clamp Short Type B (Flat Type) TC08BFS TC12BFS Super Tool Ideal for side clamping ● Use when the height of the workpiece is too low for Type A. ● Compact design allows for more workpieces to be set up. ● The tips of the jaws are flat, allowing the clamp to be used as a reference surface. ● Insert the operation wrench and tighten to slide the clamp head at a 45° angle. ● Includes hex wrench.

• Vice Clamps

Slide Clamp Short Type A (Flat Type) TC08AFS TC12AFS Super Tool Ideal for side clamping ● Compact design allows for more workpieces to be set up. ● The tips of the jaws are flat, making it a clamp that can be used as a reference surface. ● Insert the operation wrench and tighten to slide the clamp head at a 45° angle. ● Comes with a hex wrench.

• Vice Clamps