ツールシステム List of Products and Services

The "Aremco Bond 525," developed by Aremco, is a conductive heat-resistant adhesive based on epoxy filled with silver particles. It is used for the assembly of electronic components that require conductivity and adhesive strength. The heat resistance limit is 170°C.

• glue

Special mineral oil is blended with fine aluminum powder. At low temperatures, the special mineral oil functions as a lubricant, while at high temperatures, molten aluminum provides lubrication. It is suitable for lubricating machine sliding surfaces, bearings, die casting at ultra-high temperatures, releasing diamond tools, preventing seizure of bolts and nuts at high temperatures, corrosion prevention underwater, and rust prevention during mold storage. It has strong corrosion resistance, making it usable as a rust inhibitor. [420ml aerosol]

• Lubricants

This is a super heat-resistant coating agent primarily composed of yttrium oxide (Y2O3). It protects graphite, ceramics, and metals from metals that are prone to react in a molten state, such as uranium, beryllium, and titanium. The usage atmosphere is limited to vacuum and inert atmospheres (oxidizing atmospheres are not allowed). 【Capacity: 100ml, 500ml, 1L】

• Lubricants

Heat Away 641-EV Thermal Conductive and Electrical Conductive Grease by Odec Grease mixed with silver micropowder Applicable temperature range: -51 to 288°C 25g 50g This grease, formulated with silver micropowder, excels not only in thermal conductivity but also in electrical conductivity. Additionally, it has low outgassing, making it suitable for use in a vacuum.

• Lubricants

This is a grease blended with a high concentration of silver micropowder, which has particularly excellent thermal conductivity. Due to its high viscosity, it has minimal dripping after application and maintains stable retention within the applicable temperature range. [Capacity: 25g (approximately 8ml) or 50g (approximately 15ml)]

• Lubricants

Based on magnesia, the thermal expansion coefficient is the highest among ceramic adhesives. Ideal for bonding metals. Suitable for heaters, sensors, ignition devices, and more.

• glue

It is based on aluminum nitride, has high thermal conductivity, and is insulating. It is used for bonding ceramics and metals, as well as ceramics to each other, in sensors and other applications where thermal conductivity is required.

• glue

Slide Coat - Ultra-thin fluoropolymer coating, Odec Creates a "dry lubrication film" of fluoropolymer on surfaces such as metal, ceramics, glass, and wood. Widely used to prevent slipping and adhesion in parts chutes, sieves, and screen mesh areas. 420ml aerosol.

• Lubricants

It creates a "dry lubricating film" of fluororesin on the surfaces of metals, ceramics, glass, wood, and more. It is widely used for preventing slipping and adhesion in parts such as chutes, sieves, and screen mesh. 【Capacity: 1ℓ, 4ℓ】

• Lubricants

This spray uses petroleum-based organic solvents instead of the chlorine-based organic solvents previously used in "Tephreeze." It contains environmentally friendly fluororesin. The heat resistance and effectiveness are equivalent to the conventional Tephreeze. [Capacity: 420ml aerosol]

• Lubricants

This is for lubrication of precision mechanical sliding parts with strict dimensional accuracy and low load, such as printers, copiers, cameras, and locks. It is a semi-dry type with a self-repairing function, ensuring that the lubrication film does not break, and it is suitable for high-speed sliding. It has less stickiness compared to oil-based lubricants, and there is minimal dust attraction and smudging over time. It dries quickly, has little liquid dripping during spraying, and does not leave a white residue like powder sprays. 【Capacity: 100ml aerosol】

• Lubricants

AUTOL TOP 2000 Made in Germany Super durable strong adhesive grease Heat resistance limit -30 to 120°C Its strong adhesion and high durability are globally renowned.

• Lubricants

Its strong adhesion and high durability are globally recognized. It excels in oxidation resistance, corrosion resistance, and extreme pressure characteristics, allowing grease to last for a long time with minimal usage, significantly reducing the frequency of lubrication and making operations efficient in terms of both labor and cost. Additionally, it extends the lifespan of machinery. In high-load operating areas or harsh environments such as underwater, mud, and saltwater, it maintains lubrication and sealing effects for an extended period without scattering, dripping, or melting. It is pale yellow and does not compromise the appearance of the object.

• Lubricants

Uses - To prevent galling of bolts, bearings, keys, etc., and to improve assembly accuracy. - To enhance initial break-in. - To reduce mold release and mold damage during metal sintering. - As a mold release agent for molten metals, molten glass, etc. - For lubrication of moving parts in high-temperature environments. The upper limit of heat resistance is 800°C in an oxidizing atmosphere (900°C for short periods), 1200°C in a vacuum, and 2200°C in an inert atmosphere. 【Capacity: 420ml aerosol】

• Lubricants

When sprayed on a metal surface, it creates a thin, hard black coating that looks like it has been blackened at first glance, making it a convenient and inexpensive substitute for blackening in repairs or internal prototype parts. The color is a matte black, and the coating cannot be removed with oil or petroleum solvents. It comes in a 420cc aerosol can and can be applied to any metal, including steel, stainless steel, copper, copper alloys, and aluminum, instantly turning it black just by spraying it on the base material.

• Coating Agent

● For drills and taps. It allows processing with a small amount, extending the tool's lifespan. ● Compatible with various stainless steels, titanium, mold materials, as well as all metals including aluminum, copper, and brass. ● The smell is mild and easy to use. It is made up of 90% biodegradable components.

• Cutting Oil

● It is a cutting oil that is gentle on the body. It does not contain chlorine, sulfur, or any solvents or heavy metals, so you can use it with peace of mind. ● It adheres to the workpiece in a foamy form, preventing liquid from splattering and minimizing waste, making it environmentally friendly. ● Suitable for drills, taps, reamers, end mills, and turning applications. ● For all iron and non-ferrous metals, including difficult-to-cut materials. ● A cutting oil that does not contain chlorine, sulfur, solvents, or heavy metals, and is highly biodegradable.

• Cutting Oil

Rubisil Super Tap CS (Oil-based cutting oil - contains chlorine and sulfur) Super Tap CS is a brush-applied cutting oil that incorporates chlorine and sulfur-based extreme pressure additives into a fatty acid ester base. Simply applying it with a brush significantly extends tool life and improves surface finish accuracy. It is particularly effective for drilling and tapping high-hardness quenched steels (HRC 50-55), die steels, various stainless steels, titanium, Inconel, and Hastelloy, which are heat-resistant steels.

• Cutting Oil

Rubisil Super Tap CF (Chlorine-Free) ● Mainly for taps and drills, it reduces tool chatter and breakage when machining stainless steel and titanium, significantly extending tool life. ● The threads created during tapping do not get stripped, allowing for the production of high-precision products. ● It can be used for machining all metals, especially effective for difficult-to-machine materials like stainless steel and titanium. It also has a proven track record in machining die steel and other mold materials.

• Cutting Oil

ST&T Cutting Oil for Brush Application and Mist Supply for Stainless Steel & Titanium This product is highly biodegradable and very friendly to humans and the Earth's environment. It is chlorine-free and ideal for machining difficult materials such as stainless steel, chromoly, titanium, Inconel, and die steel. Features: - The components for stainless steel & titanium are all derived from plant extracts, making them highly biodegradable. In the unlikely event that it flows into rivers, 94% of the components will biodegrade within 21 days (CEC L-33-A-94 test). It contains no chlorine, sulfur, phosphorus, mineral oils, solvents, or heavy metals, making it a cutting oil that is very friendly to the human body and the Earth's environment.

• Cutting Oil
• Lubricants

Features of BN Lubricants and Release Agents - It forms an extremely smooth BN film, maintaining stable lubrication effects. - It has excellent adhesion to glass, metal, and plastic surfaces. - It can be used up to 700°C in the atmosphere and 2200°C in an inert atmosphere. - Its white color helps maintain a good working environment.

• Lubricants

BN Lubricant and Release Agent Features - It forms an extremely smooth BN film, maintaining stable lubrication effects. - It has excellent adhesion to glass, metal, and plastic surfaces. - It can be used at temperatures up to 700°C in the atmosphere and 2200°C in an inert atmosphere. - Its white color helps maintain a good working environment. Applications - Release and lubrication under high-temperature conditions - Release during glass, press-formed products, molten metal, and rubber molding - Other applications requiring heat resistance, release properties, and lubrication

• Lubricants

■Spraying on surfaces such as glass, plastic, ceramics, and metals, which are difficult to measure, makes surface measurement possible. ■Please shake the 3D AntiGlareSpray well before use. ■Spray the 3D AntiGlareSpray thinly onto the surface to be measured from a distance of about 20 cm. In 3D laser scanning, an anti-reflective coating is essential to optimize measurement results. Helling's 3D laser scanning anti-reflective spray is the optimal product for these needs. Due to its very fine particle structure, it can be applied as a flat layer with minimal thickness. Helling's 3D AntiGlareSpray is a product that meets the precision required by laser technology. It is a surface measurement spray designed for mirror-like and transparent objects.

• Coating Agent

【Features】 - Usable for rust prevention on all types of metals! - Dries in 15 to 20 minutes after spraying and forms a transparent film! - Creates a colorless, transparent, glossy, and tough coating. - Being a hard film type, it does not attract dust and maintains aesthetics! - Difficult to create brush marks even when applied with a brush! - Strong rust prevention lasts over 3 years indoors and over 6 months outdoors! - The film can be painted over without removal. - Provides electrical (insulation) resistance. - Strong adhesion and excellent chemical resistance. - Protects the product from scratches.

• Rust Inhibitor

【Features】 - Capable of cleaning all types of materials! - Economical as it is diluted with water from 5 to 100 times! - Non-corrosive. - Has excellent degreasing power equivalent to trichloroethylene. - No unpleasant odors, toxicity, or hazards. - Can be used at room temperature. - Can be added to acidic solutions for pre-treatment before plating, allowing for simultaneous degreasing and rust removal. - This product does not contain the following chemicals or any chemicals composed of them: PCB / Arsenic compounds / Lead compounds / Chromium compounds / Cadmium compounds / Cyanide compounds / Organotin compounds / Mercury compounds. 【Waste Liquid Treatment】 - Waste liquid containing oil after degreasing should be treated according to factory oil disposal methods. Heating the waste liquid above 70°C will cause the oil and fat to separate and float to the top. Since Tobikamaritt itself has a pH of 9.0 to 9.4, please neutralize it with acid before disposal. 【Technical Data】 【Temperature and Degreasing Power】 - The degreasing power increases with temperature, depending on the type of oil attached to the non-cleaned items. However, above 50°C, the effectiveness does not change, and some components may gradually decompose, which may lead to a decrease in cleaning power, so please be cautious.

• Cleaning agents

Aluminum Room Temperature Black Dye Tobika Blackie A New Type (Concentrate) 【Target Metals】 Widely used for black dyeing of aluminum finished products and parts. - Pressed parts, pins, screws, bolts, nuts, washers, springs, shafts. - Finished products or cast parts of machines, tools, and molds. - Black dyeing or repair of parts of assembled machines. 【Characteristics】 Activated with Solution A and treated with Solution B for black dyeing. Can be done at room temperature by immersion. No special equipment required. - The processing technique is extremely simple and does not require special equipment; a plastic bucket is sufficient for small quantities. - A uniform coating can be achieved even on complex shapes. - Since the processing temperature is room temperature, it does not damage the material. - Blackie is odorless, non-flammable, and does not deteriorate over long-term storage. - There is almost no dimensional change before and after processing.

• Coating Agent

Black dyeing processing requires complete degreasing due to chemical reactions. (Note: Insufficient degreasing can cause dye unevenness.) For degreasing agents, there is trichloroethylene or a specialized degreasing agent, the water-based degreasing cleaner Tobikamaritt from Tobi Co., Ltd. In the case of trichloroethylene degreasing agent, immerse the item to be dyed for 1 to 2 minutes, ensuring sufficient degreasing, then remove it and let it air dry. Alternatively, wipe off the solvent with a cloth or towel that has not been contaminated with oil.

• Coating Agent

【Target Metals】 It can be widely used for blackening stainless steel finished products and parts. - Pressed parts, pins, screws, bolts, nuts, washers, springs, shafts. - Finished products or cast parts of machines, tools, and molds. - Blackening or repair of parts of assembled machines. 【Characteristics】 Surface activation with Solution A, blackening treatment with Solution B. Blackening can be done at room temperature by immersion. No special equipment is required. - The processing technique is extremely simple and does not require special equipment; a plastic bucket is sufficient for small quantities. - Even for items with complex shapes, a uniform film can be achieved. - Since the processing temperature is at room temperature, it does not damage the material. - The blackening solution is odorless, non-flammable, and does not deteriorate even with long-term storage. - There is almost no change in dimensions before and after processing. 【Dilution Ratios】 - Solution A is used as is. - Solution B is diluted with water to 2 to 4 times the original concentration.

• Coating Agent

The black dyeing process for nickel metal can be easily done at room temperature by anyone, anywhere. (This product is a concentrated solution, so it should be diluted with tap water before use.) 【Target Metals】 It can be widely used for black dyeing of finished products and parts made of nickel metal. - Pressed parts, pins, screws, bolts, nuts, washers, springs, shafts. - Finished products or cast parts of machines, tools, and molds. - Black dyeing or repair of parts of assembled machines. 【Characteristics】 - It allows for black dyeing at room temperature through immersion. No special equipment is required. - The processing technique is extremely simple and does not require special equipment; a plastic bucket is sufficient for small quantities. - Even complex shapes of the items being treated can achieve a uniform coating. - Since the processing temperature is at room temperature, it does not damage the material. - The black dye is odorless, non-flammable, and does not deteriorate over long-term storage. - There is almost no change in dimensions before and after processing. - It is an acid aqueous solution that blackens nickel metal and colors it purple at room temperature. - It is safe and economical to use, dissolving in water without danger during work and can be diluted for use.

• Coating Agent

【Target Metals】 It can be widely used for coloring finished products and parts made of copper alloys. - Pressed parts, pins, screws, bolts, nuts, washers, springs, shafts. - Finished products or cast parts of machines, tools, and molds. - Coloring or repairing parts of assembled machines. 【Characteristics】 You can achieve your desired color at room temperature through immersion. No special equipment is required. - The processing technique is extremely simple and does not require special equipment; a plastic bucket is sufficient for small quantities. - Even for items with complex shapes, a uniform coating can be achieved. - Since the processing temperature is at room temperature, it does not damage the material. - Colored AL is odorless, non-flammable, and does not deteriorate even with long-term storage. - There is almost no change in dimensions before and after processing. - It is a versatile coloring agent that easily colors copper alloys in an acidic aqueous solution at room temperature to the desired color. 【Dilution Ratio】 4 parts water to 1 part concentrate (5 times dilution).

• Coating Agent

1. **Degreasing** Black dyeing processing requires complete degreasing due to chemical reactions. (Note: Insufficient degreasing can cause dye unevenness.) For degreasing agents, there is trichloroethylene or a dedicated degreasing agent, the water-based degreasing cleaner Tobikamaritt made by Tobi Corporation. In the case of trichloroethylene degreasing agent, immerse the item to be dyed for 1-2 minutes, ensure sufficient degreasing, then remove and let it air dry. ↓ 2. **Surface Activation** If there is rust or smut, immerse in a 10% hydrochloric acid solution (a solution diluted 2-3 times with water from industrial hydrochloric acid) for 1-2 minutes. ↓ 3. **Black Dye Treatment** Dilute the room temperature black dye Tobik Blackie SN with water (distilled water or tap water) at a ratio of 1:1-2, then place the pre-treated item into this solution, stirring up and down several times, and immerse for 1-2 minutes. (Note: If used undiluted or if the dilution ratio is insufficient, it will result in poor fixation, so be careful.) ↓ 4. **Washing (Hot Washing)** Since black "sludge" adheres to the surface, please wipe it with a sponge or cloth. Additionally, using Chemik's ChemQ Sludge Remover Spray will be even more effective.

• Coating Agent

Black dyeing can be easily done at room temperature by anyone, anywhere. (This product is a concentrated solution and should be diluted with tap water before use.) 【Target Metals】 It can be widely used for black dyeing of finished products and parts made of copper, brass, and zinc. - Pressed parts, pins, screws, bolts, nuts, washers, springs, shafts. - Finished products or cast parts of machines, tools, and molds. - Black dyeing or repair of parts of assembled machines. - Black dyeing of large copper, brass, and zinc products that cannot fit into a tank. 【Characteristics】 Black dyeing can be done at room temperature by immersion or brush application. No special equipment is required. - The processing technique is extremely simple and does not require special equipment; a plastic bucket is sufficient for small quantities. - Even complex shapes of the items being treated can achieve a uniform coating. - Since the processing temperature is at room temperature, it does not damage the material. - Blackie C is odorless, non-flammable, and does not deteriorate even with long-term storage. - There is almost no change in dimensions before and after processing. - In addition to immersion, brush application and spraying methods are also available for processing.

• Coating Agent

The mold maintains performance for long periods even at high temperatures above 450°. It has long-lasting water resistance and heat water resistance. The formed film does not adhere, making it easy to remove during work. This product undergoes a thermochemical reaction to form a strong cured body. The cured body does not soften due to heat. It has a very high solid content and forms a dense layer, providing sufficient waterproof curing. This product is in paste form, making application easy, and it can be applied thinly.

• Plastic Mould
• Press Dies
• Mold Design

The "Micro Air Grinder" is a pencil-type grinder that is ultra-compact, lightweight, and fits comfortably in your fingertips. With a precision-designed vane motor, it offers excellent safety and durability, achieving high-speed precision machining with high rotation and high output. It maintains stability without core wobble and demonstrates long-lasting performance. 【Features】 ■ Ultra-compact and lightweight ■ Pencil-type ■ High-speed rotation and high output ■ Achieves high-speed precision machining ■ Outstanding safety and durability *For more details, please refer to the catalog or feel free to contact us.

• Other Machine Parts
• tool

The "Multi Crane" is the ideal crane for lifting and moving in work sites without crane equipment or in hard-to-reach places. The arm length can be adjusted in three stages. It has wheels for smooth movement, and the arm and legs are foldable, making it compact and usable anytime, anywhere. We also offer an economy type without a manual winch in the new series. 【Features】 ■ Arm length is adjustable in three stages ■ Arm operation uses hydraulic power for easy vertical movement ■ Lifting and lowering of loads is possible with a manual winch ■ Arm and legs are foldable ■ Easy to move with wheels *For more details, please refer to the catalog or feel free to contact us.

• Other transport machines and equipment
• Other factory equipment

The cold black dye for iron, steel, and cast iron, Tobika "Blackey," allows for easy black dyeing at room temperature, anywhere and by anyone. (This product is a concentrated liquid, so it should be diluted with tap water for use.) 【Features】 ○ The processing technique is extremely simple and does not require special equipment; a small amount can be done with a plastic bucket. ○ Even items with complex shapes can achieve a uniform coating. ○ Since the processing temperature is room temperature, it does not damage the material. ○ Blackey is odorless, non-flammable, and does not deteriorate even with long-term storage. ○ There is almost no change in dimensions before and after processing. ○ In addition to immersion, application methods include brush painting and spraying. *For more details, please contact us or download the PDF.

• paint

Tobika Top Guard is a black dye spray with strong adhesion, excellent water resistance, oil resistance, and heat resistance. It can be used to blacken (color) all metals such as iron, cast iron, copper, copper alloys, aluminum, and stainless steel.

• paint

Conventional penetrating lubricants do not provide long-term lubrication effects and are almost ineffective for extreme pressure lubrication. NASKALUB forms a penetrating special molecular layer due to the electric ions generated by metal contact friction, providing excellent extreme pressure properties and smooth lubrication. Its effects can last semi-permanently. This film remains intact for a certain period even after the oil runs out, maintaining extreme pressure and lubrication, thus preventing initial wear, seizing, squeaking, wear, and damage, significantly extending the lifespan of machines and components while ensuring smooth rotation.

• Chemicals
• Lubricants

This is a best-selling machine featuring high precision and long lifespan, utilizing many small, lightweight (100g) high-precision bearings.

• Other cutting tools

It can be used for almost all machining processes from cutting to grinding. It can accommodate a wide range of materials, from difficult-to-machine materials to non-ferrous metals. With ultra-long life and reduced usage, it also contributes to cost reduction. Since it does not contain oil, it allows for a no-cleaning process.

• Cutting Oil

【Specifications】 - Material: Special alloy steel - Finish: Nickel-chrome plating, with grip - Product specifications: Compatible tube outer diameter: 6–16mm, 1/4–3/4" - Product specifications: Bending radius: 14.3–76.2mm

• glue

【Specifications】 - Width × Height × Overall Length (mm): 25 × 25 × 148 - Compatible knurled inserts: KNCD25 type / KNCD21 type - Processing diameter (mm): 3 to 250 (KNCD25 type) 18 to 250 (KNCD21 type) - Compatible models: Lathe

• Other work tools

【Specifications】 - Case dimensions (W x D x H) (mm): 450 x 243 x 210 - Set contents: 51 pieces - Insertion angle: 12.7 mm

• Tool Sets

【Specifications】 - Material: Structural steel - Finish: Baked paint - Capacity: 500 and 1,000 kg - Height: 2,000 mm

• crane

【Specifications】 - Chucking diameter: φ3・6 - Maximum rotation speed: 57,000・30,000 r.p.m - Supply air pressure: 0.6 MPa - Air consumption: 160・200 Nl/min

• Air Tools