日精 List of Products and Services

This is a device for performing visual inspections of power device ceramic substrates for defects such as burrs, chips, cracks, scratches, dirt, discoloration, solder overflow, foreign objects, and bulging/denting on both the front and back surfaces. By setting magazines or trays containing the ceramic substrates and operating the device, visual inspections of the front and back surfaces of the ceramic substrates are conducted, and based on the inspection results, sorting into good and defective products is performed. 【Features】 ■ Detection of "bulging" and "denting" defects through high-density 3D inspection ■ Realization of an optimal lighting environment using multi-angle lighting ■ High-speed inspection achieved with fast lighting switching and rapid image capture ■ Capable of inspecting both the front and back surfaces *For more details, please refer to the PDF document or feel free to contact us.

This is a device for inspecting defects such as stains and foreign substances present on green sheets for LTCC (Low-Temperature Co-Fired Ceramics), as well as irregularities, thickening, thinning, and foreign substances in the printed electrode patterns. It is capable of inspecting the positional accuracy of the electrode patterns and can be used for quality control before the green sheet stacking. 【Features】 ■ Achieves fine defect detection and precise dimensional inspection with high-resolution 2D inspection ■ Achieves inspection of fine irregularities with high-resolution 3D inspection ■ Provides an optimal lighting environment using multi-angle illumination ■ Realizes high-speed inspection with fast lighting switching and high-speed image capture *For more details, please refer to the PDF document or feel free to contact us.

High-precision 2D appearance inspection device with a high-precision defect inspection unit for six surfaces. It can perform fine defect inspections on all six surfaces of various image sensors, including insert-type for surveillance cameras and SMT type for DSC. With original seamless, seven-channel, multi-angle lighting, it provides an optimal lighting environment, allowing for batch capture of multiple images in inspection mode with a minimum of 10 msec/image processing. Inspections are conducted with high resolution and high definition using cameras up to 25 Mpix. 【Features】 ■ Top and bottom inspection - Focuses on the inspection surface by combining multi-angle lighting, multiple image captures, and Z-axis linked control to acquire inspection images. ■ Side inspection - Corrects focus shifts caused by XYθ misalignment for each workpiece, ensuring precise detection of fine defects. *For more details, please refer to the PDF document or feel free to contact us.

This is a high-performance appearance inspection device for automotive semiconductor ICs that enables all-direction inspection of devices. With 3D/2D dimensional inspection, it allows for high-precision defect detection on both sides of leads, balls, and mold surfaces. It can perform high-speed imaging of up to 20 frames with a 25M camera and 7-channel individual volume control, and by using multi-angle lighting and multiple images, it can eliminate dents and extract foreign objects, reliably capturing targeted defects such as root metal foreign objects, foreign objects on leads, and voids on mold sides. Additionally, it removes detected foreign objects using dry ice, restoring defective products to good condition. 【Features】 ■ 3D/2D dimensional inspection ■ Accurate 3D measurement using phase shift method ■ Reliable capture of targeted defects with multi-angle lighting and multiple images ■ Removal of detected foreign objects using dry ice, restoring defective products to good condition ■ Realization of all-direction inspection of devices by adding a side inspection stage *For more details, please refer to the PDF materials or feel free to contact us.

This is an automatic visual inspection device for lead frames capable of high-precision 2D defect inspection. In addition to lead frames, it can also inspect defects on die-bond chips on the lead frames. You can choose from high-resolution inspection-compatible cameras ranging from 4M to 25M pixels, and it enables high-precision 2D defect inspection with multi-angle LED lighting and multiple image captures. It reliably detects various defect modes. 【Features】 ■ Supports inline inspection ■ Maintains a clean environment inside the device with downflow from a clean fan ■ Outputs inspection results using MAP data *For more details, please refer to the PDF document or feel free to contact us.

This is an automatic visual inspection device for ceramic substrates that can perform inspections with high precision and speed. With multi-angle LED lighting and multiple image captures, it enables high-precision 2D defect inspection. By creating an ideal lighting environment, achieving high-speed image capture, and accommodating multiple image captures and high-resolution inspections, it reliably detects various defect modes. It is also capable of high-precision 3D defect inspection, acquiring height data for the entire inspection surface to detect slight bulges or dents. 【Features】 ■ High-precision 2D defect inspection - Capable of multi-angle/multi-channel control from the construction of an ideal lighting environment - High-speed image capture and multiple image captures allow for lighting changes and multiple image captures - Supports high-resolution inspections with a choice of 4M to 25Mpix cameras ■ Capable of high-precision 3D defect inspection - Acquires height data for the entire inspection surface to detect slight bulges or dents *For more details, please refer to the PDF document or feel free to contact us.

This is an appearance inspection device that automates defect inspection of power device chips with high precision. By automating the inspection of all six surfaces, it achieves 2D high-precision defect inspection without visual inspection (target products: chips for IGBTs, power diodes, etc.). In side inspections, focus shifts caused by XYθ misalignment are corrected for each workpiece, ensuring that fine defects are reliably detected with just the right focus. For top and bottom inspections, multi-angle lighting combined with multiple imaging captures inspection images suitable for various defect modes, ensuring that targeted defects are reliably detected. 【Features】 ■ High resolution: High-resolution inspection with a maximum 25Mpix camera ■ Suitable lighting environment: Multi-angle lighting ■ High-speed control and capture: Continuous capture of multiple optimal images for each defect mode *For more details, please refer to the PDF document or feel free to contact us.

This series is a basic type of dust removal device used in various processes. We offer models ranging from 2 to 5 units, suitable for both inline and outline applications. The lineup includes the "RY-705B," which features a non-contact magnetic gear for the drive gear, and the "RY-505Z," a two-unit clean roller type with cleaning on both the upper and lower sides. We accommodate various customer requests for sheet products and roll-to-roll lines. 【Features】 ■ Clean Roller RY-705B - Employs a non-contact magnetic gear for the drive gear - A revolutionary clean roller that eliminates dust generation from within the device ■ Clean Roller RY-505Z - Arranges two clean rolls on both the upper and lower sides to double the dust removal effect - Ideal for surface dust removal of products before the lamination process or exposure process in automatic lines ■ Customized Products - Designed and manufactured to fit the customer's work size * We also accept demo evaluations to determine if removal is possible with samples provided. * For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce the "Thin Plate Compatible Clean Roller." The "RY-1106 Series" utilizes a new type of clean roll with a small diameter, making it possible to remove dust from thin plates and films. Additionally, by adopting a magnetic gear in the drive section of the device, we suppress minute dust generation from the gear part. We also offer the "RFC-705A" and "RF-705A." 【Features】 ■ Prevents dropping ■ Clean roll that prevents entanglement ■ Uses magnetic gear in the drive section ■ Capable of cleaning 50μm workpieces ■ Customized products Designed and manufactured to fit the customer's work size * We also accept demo evaluations to determine if removal is possible with samples provided. * For more details, please refer to the PDF document or feel free to contact us.

We propose customized unit rollers tailored to your needs. We accommodate various specifications for roll-to-roll lines and vertical path lines, as well as designs for fixed installation units in line equipment. Our solutions are ideal for dust removal from films, substrates, and glass panels. 【Features】 - Manufactured to order according to customer requirements. - Capable of responding to various requests for installation and mounting in existing lines and equipment. - We can produce unit rollers up to 2,600mm based on our track record. - Suitable for long products in raw material processes and slitting processes. - Enhanced structural strength improves adhesion to products, allowing for high-speed flow rates of up to 250m/min. *We also accept demo evaluations to determine if removal is possible with samples provided. *For more details, please refer to the PDF document or feel free to contact us.

Before purchasing evaluation machines or mass production machines, why not try a coating evaluation with us first? As you take a step towards productization with mass production in mind, various challenges that were previously unnoticed will come to light. To address these challenges, we will listen to your requests and provide various ideas, such as ink improvement proposals and drying method suggestions, while working together with you to establish mass production conditions. 【Features】 ■ Extensive evaluation track record - Coating evaluations aimed at mass production and productization conducted by a manufacturer with a wealth of delivery experience in inkjet devices for displays, semiconductors, electronic devices, and research institutions. ■ Advice for mass production - From the customer's perspective, we provide advice based on all know-how regarding processes, coated substrates, inks, etc., to establish stable productivity and quality for mass production. ■ Suitable print head selection - We select and evaluate suitable print heads from multiple manufacturers based on your coating quality requirements. *For more details, please refer to the PDF document or feel free to contact us.

The "IP2030L (A4 size)" is an inkjet coating device for electronic devices that applies functional ink to wafers, sheets, glass, and resin substrates. This single unit can handle everything from experiments and prototypes to production, enabling high-resolution pattern coating. Additionally, you can choose from two types of models according to your application. 【Features】 ■ One unit for experiments, prototypes, and production ■ High-resolution pattern coating ■ Supports patterning, full-area, and partial coating ■ Extensive range of optional accessories *For more details, please refer to the PDF document or feel free to contact us.