シスコム（SysCom） List of Products and Services

The new product NDS-1000 is a low-cost, high-function dynamic viscoelastic measurement device that uses a piezoelectric actuator as a vibration source and operates on longitudinal vibrations. It can be applied to samples such as prepregs and those containing fillers, which are difficult to measure with conventional rotational vibrations. It simultaneously evaluates "elasticity" and "viscosity" with high precision using micro-sized and small amounts of samples, comparable to the size of a grain of rice. This general-purpose rheometer can be applied from the development to quality control of various industrial materials, biological and food materials, chemical products, gels, paints, and adhesives. There is an increasing track record of deliveries to universities, research institutions, and private sector research and development and quality control applications in pharmaceuticals, cosmetics, food, electronics, and chemicals. It also responds promptly to actual sample testing. Main Features: 1) All-in-one structure with the temperature control unit housed inside the casing. 2) Easy measurement with your own laptop (USB connection). 3) Simple operation from sample setup to measurement. 4) Easy compression, shear, bending, and tensile testing by exchanging test jigs. 5) Easy confirmation of the linear region with the post-measurement Lissajous display. 6) Capable of measuring flexible materials and liquids due to large amplitude. 7) Applicable to small amounts, thin films, and amorphous samples, etc.

• Food Testing/Analysis/Measuring Equipment
• Analytical Equipment and Devices
• Production Management System

A compact surface roughness and shape measurement system that utilizes optical heterodyne interferometry, providing vibration resistance and high precision measurements with a height resolution of 0.1 nanometers. Measurement time can be significantly reduced, and it allows for full inspection on the production line without the need for an anti-vibration table. It is capable of extensive measurements and can be applied to multi-point measurements and large samples. <Main Features> 1) Significant reduction in measurement time at a low cost 2) High resolution with a height direction of 0.1 nanometers, maintaining compatibility with AFM 3) Simple measurements without the need for sample pre-treatment or vacuum, eliminating the need for an anti-vibration table 4) Capability for extensive measurements 5) External vibrations are canceled out through optical heterodyne interferometry, etc.

• Laser microscope
• Visual Inspection Equipment
• Optical microscope

Probe Needle: Various probe needles are available for high-temperature probing and other probing purposes, tailored for ultra-small targets with a tip radius of 0.1μm. They can be used as replacement probe needles for existing probing systems. Probe Holder: The probe needle is set at the tip and combined with a manipulator. Products are available with Kelvin connections, coaxial and triaxial specifications, as well as those that incorporate both functions (e.g., triaxial specification with Kelvin connection). Manipulator: The probe holder, equipped with a probe needle at the tip, is attached to perform probing on the target. Two types are available: magnetic and vacuum suction base.

• Wafer
• Transistor
• Dedicated IC

The open-loop type wind tunnel "Model BWT/CWT" is a quality research wind tunnel designed for thermal analysis testing at the component level, such as electronic circuit board modules and heat sinks. It features a honeycomb structure and screens to prevent flow disturbances in the test section, providing a uniform and stable airflow of 0 to 5 m/sec. This wind tunnel can be operated in both vertical and horizontal orientations. The test section is made of plexiglass, allowing for easy observation of the flow. There are ports for various probes at 12 locations, enabling the insertion of thermocouples, pitot tubes, airflow sensors, and temperature sensors into the test section. Additionally, a wind tunnel controller is provided, allowing for easy control of the airflow speed within the wind tunnel test section via PC connection. Users can easily program and control the testing process. Various models are available depending on the dimensions of the test chamber and the airflow range. For more details, please contact us.

• Other analyses

A compact wind tunnel system for laboratory use that can automatically control wind speeds up to 7 m/sec and air temperatures up to 85°C. It allows for high-quality thermal analysis testing of various PCB substrates and individual electronic components from room temperature to high-temperature ranges. With an optional orifice plate, airflow generation of over 40 m/sec is also possible. The internal air circulation enables rapid heating to the specified temperature. It can also be used for functional testing of heat sinks and calibration of air and temperature sensors. Additionally, a dedicated wind tunnel controller can be connected to a PC for easy automatic control of wind speed and temperature within the test section. Two standard model options are available based on the dimensions of the test section. For more details, please refer to the separate brochure.

• Prototype Services
• Environmental Test Equipment
• Testing Equipment and Devices

The ultra-compact environmental sensor SAN-303 measures 19mm x 24mm x 40mm and continuously measures wind direction, temperature, humidity, and atmospheric pressure. By installing sensors at multiple points, it visualizes the flow of air within a space, allowing for more detailed air conditioning testing and control. It can be provided with only a wind speed sensor or can support analog output for wind direction (sin, cos). <Basic Specifications Overview> ● Temperature Range: -20℃ to 80℃ ● Humidity: 0 to 100% RH ● Atmospheric Pressure: 260 to 1260 hPa ● Wind Direction: Horizontal 360 degrees (Accuracy ±5 degrees) (Wind Direction Sensitivity: Wind Speed 0.5 m/s to 15 m/s) ● Real-time graphic display ● Operating Environment: -20℃ to 80℃ (without condensation) ● Interface: I2C, USB, WiFi, and ZigBee communication *A separate battery box is required ● Power Supply: DC 3.3V ±0.3V (I2C)

• Sensors

If you have custom requests, please fill out the attached sheet and contact us. By adopting a dedicated mounting clip, direct attachment to the BGA has become possible. This minimizes the mounting area and eliminates the need for hole processing on the PCB, making it ideal for increasing design flexibility. A new easy-to-install pin-fixed type has also been introduced! *Due to our contract with the manufacturer, we accept inquiries for annual usage of 1,000 units or more.

• Other electronic parts