日本フローコントロール List of Products and Services

The RS5 is a volumetric flow meter developed for measuring high viscosity and micro flow rates, utilizing a newly designed precision rotor. It allows for precise measurement of small application amounts of adhesives, sealers, and sealing agents, as well as the drop amounts from dispensers, with minimal pressure loss. Additionally, it can achieve high-precision measurements without being affected by viscosity changes, which is a characteristic of volumetric devices. Even minute drop amounts can be detected with a standard high-resolution sensor and are output as pulse signals. 【Features】 ■ Compatible with medium to high viscosity materials ■ Low pressure loss ■ High precision ■ Lightweight/compact design ■ Suitable for ultra-low flow rates ■ Low liquid quality variation *For more details, please download the PDF or feel free to contact us.

• Flow Meter

Our company handles "volumetric flow meters" used for gas measurement. The measuring drum inside the main body is divided into four chambers with a spiral structure, and about two-thirds of the total volume of the drum is filled with sealing liquid (oil, water, etc.). The gas that flows in from the back of the drum displaces the sealing liquid in the drum, sequentially pushing up each chamber. This volume movement serves as the power to rotate the measuring drum, and the rotational motion is transmitted to the mechanical counter (totalizer) on the front of the main body via a counter-rotating magnetic coupling. 【Measurement Principle】 ■ Gas enters the first measuring chamber through the central gas inlet pipe. ■ The first measuring chamber fills with gas and rises. ■ The first measuring chamber is in a completely filled state. ■ Next, gas begins to fill the second measuring chamber. ■ By repeating this operation sequentially, continuous gas measurement is possible. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The "GFM/GFC series" is a low-cost, general-purpose thermal mass flow meter. It features an angle-adjustable LCD display on the top, allowing for instantaneous flow readings. Please feel free to contact us if you have any inquiries. 【General Specifications (Excerpt)】 ■Measurement Accuracy ・±2.0% F.S. (15–25°C at 100–180kPa) ・±3.0% F.S. (0–50°C at 7–3400kPa) ■Reproducibility ・±0.5% F.S. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The "DPM/DPC Series" is a laminar flow meter/controller designed for measuring the flow of non-corrosive gases. It performs high-precision differential pressure measurement while simultaneously measuring temperature and absolute pressure, allowing for density correction. Therefore, the displayed and output values are converted to standard conditions (Standard: 20°C at 1 atm). An optional low differential pressure model, "BREEZE(TM)," is also available. 【Features】 ■ High Precision - Measurement accuracy: ±0.5% RD +0.2% F.S. - Reproducibility: ±0.15% F.S. ■ Fast Response - The high-sensitivity differential pressure sensor quickly tracks real-time flow changes. *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

We would like to introduce the "Thermal Mass Flow Meter" handled by Nippon Flow Control Co., Ltd. Utilizing the correlation between the amount of heat taken away by the flow from a heated sensor and the mass flow rate, it measures gases in the medium to large flow range. The internal sensor probe is fixed at both ends, allowing it to withstand sensor vibrations due to high flow rates and impacts from foreign substances such as slugs. Additionally, it can measure 12 types of gases plus mixed gases through switching. 【Features】 ■ Simple structure, low pressure loss (only temperature sensor inside the piping) ■ Fast response (response time: 0.8 seconds), robust design (adopts newly developed DDC-Sensor) ■ High precision (NIST traceable), high pressure resistance (up to 5MPa) ■ Wide range capability (standard 1:100) *Option 1:1000 ■ Explosion-proof design (pressure-resistant explosion-proof structure and dust explosion-proof structure by the container) *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

We handle the area-type flow meter "Purgemeter LH/EK/A·C·D." The "LH" model features excellent airtightness and a standard pressure resistance of 2MPa. All models come standard with a dual scale for water and air. The "EK" model is designed for OEM specifications, allowing for customization of scale width, font, scale and font colors, and logo printing according to your requirements. Additionally, the "A·C·D" model has a simple design for installation in piping from the bottom to the top, and does not use any O-rings or gaskets in its construction. 【Features】 ■ Robust design with an acrylic body ■ Equipped with a flow adjustment valve ■ Low cost ■ OEM specifications available (custom scales, logos, etc.) *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Flow Control
• Other measurement, recording and measuring instruments

We would like to introduce the 'MGC-1' handled by Nippon Flow Control Co., Ltd. This product is a milli gas counter suitable for measuring fluids such as biogas (methane gas, etc.) and corrosive gases. A typical application is the measurement of biogas generation from fermentation. As an option, we also offer the "RIGAMO system," which allows data collection from up to 24 units on a single PC, and the ability to analyze the generation amount and concentration of biogas. 【Features】 ■ Lightweight and compact ■ Minimum flow rate of 1ml/L ■ Pulse output available ■ Measurement of micro flow, biogas, and corrosive gases *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The "SLM" is a product developed for the cooling and protection of mechanical seals in spiral pumps. It features a robust design that can withstand vibrations and freezing environments, and is suitable for water containing impurities. Deposits on the tapered pipe can be cleaned using the standard included push cleaner. Optional accessories include a pressure gauge and a proximity switch for alarm output. We offer a flow meter that can be used in harsh environments, providing a package that ensures the safety of the equipment. 【Features】 ■ Corrosion-resistant material structure with robust design ■ Excellent impact resistance ■ Suitable for freezing environments ■ Simple structure, easy maintenance ■ Wide operating temperature range (-20 to 100°C) *For more details, please refer to the PDF document or feel free to contact us.

• Other security and surveillance systems

We would like to introduce the 'G2/A1/01' handled by Nippon Flow Control Co., Ltd. The G2 series digital flow meter is a turbine-type general-purpose flow sensor. The rotor inside the main unit rotates in proportion to the flow rate of the passing fluid, and its rotation speed is detected by a non-contact pick-off coil, which processes it into instantaneous and cumulative flow rates. We offer a field display type with a built-in internal battery, as well as a pulse output type that can handle high-temperature water up to 100°C and external displays. 【Features】 ■ Uses commercially available batteries ■ Compact design ■ High pressure compatible (MAX 10MPa) ■ Low cost ■ Short delivery time ■ High temperature compatible (MAX 100°C) *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The "FT20P series turbine meter" is a flow sensor that uses optical detection. The rotation of the internal rotor is proportional to the flow rate of the fluid passing through it. This rotation is detected by an optical sensor and amplified by a preamplifier at the top. Since it uses an optical sensor, it can only be used for transparent fluids, and the output signal is a pulse output from an open collector. 【Features】 ■ OEM compatible / low cost ■ Low pressure loss (70 kPa at maximum flow rate) ■ Compatible with solution materials / pure water and chemical solutions ■ Connection / PP or PVDF adapter *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The "FC810 Series" is a multifunctional digital display meter. It features a two-line display and an additional line for auxiliary display, making it easy to read. By combining it with pulse output and analog output flow sensors, it is capable of displaying instantaneous and cumulative flow. Additionally, various input and output options can be selected, allowing it to meet your specific requirements. It also complies with the RoHS directive, making it an environmentally friendly product. 【Features】 ■ Multifunctional digital display meter ■ Capable of displaying instantaneous and cumulative flow ■ Various input and output options available ■ Front panel is IP66 rated for water and dust resistance ■ Can be installed in harsh environments *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments
• Other electric meters
• Flow Meter

The "FC110 Series" is a compact digital display meter. In combination with a pulse output flow sensor, it can display instantaneous flow (FC110-2), cumulative flow (FC110-3), and instantaneous cumulative flow (FC110-23). The front panel is designed to be equivalent to IP66 for drip and dust resistance, allowing installation in harsh environments. It also complies with the RoHS directive, making it an environmentally friendly product. 【Features】 ■ Compact digital display meter ■ Capable of displaying instantaneous flow, cumulative flow, and instantaneous cumulative flow ■ Front panel is drip and dust resistant ■ Can be installed in harsh environments ■ Complies with the RoHS directive *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic measuring instruments
• Other electric meters
• Flow Meter

The "Oil Colorimeter OILCOL Series" is an analytical instrument that quantifies the degree of oil degradation color. The color hue of oil degradation complies with the ASTM color standard (ASTM D1500). By installing it inline, you can monitor issues caused by oil degradation (color change) in real-time. This product detects the amount of light passing through the oil when illuminated by LED light, compares it with the baseline data, and displays the degradation color degree as a numerical value. 【Features】 ■ Real-time measurement with inline installation ■ Display scale from 0.5 to 8.0 (step 0.5) in 16 levels ■ Analog output (4-20mADC) ■ Data collection possible via computer (Modbus) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "EZ-View(R) Flow Alarm" is a flow monitor with contact output that features an internal spring. After installation in the piping, it is possible to change the contact position to any desired value while confirming the operation of the indicator from the outside. Since it uses an indicator held by an internal spring, it can be installed in both horizontal and vertical piping. Additionally, a special model that accommodates flow from top to bottom, which is the opposite direction of the standard, can also be produced. 【Features】 ■ Oil compatible (4.2–108 mm²/s) ■ Low cost, short delivery time ■ Compact ■ Free installation posture in horizontal and vertical ■ Adjustable setting point ■ Flow indication included *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

We would like to introduce the "Static Mixer" handled by Nippon Flow Control Co., Ltd. It has no moving parts, features an inline and simple structure, and enables stable mixing. We offer a lineup including the "85 Series General Use," designed for high-pressure mixing and easy cleaning of the interior pipes after use, and the "100 Series ALL SUS MODEL," which uses stainless steel for both the housing and elements. 【Features】 ■ Easy to clean ■ Stable mixing possible ■ No moving parts ■ Maintenance-free ■ Low pressure loss ■ Low cost *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

The ZPI gear pump is an internal gear type positive displacement pump. It offers stable metering performance and can handle a wide range of temperatures, making it suitable for various applications. 【Features】 Stable metering discharge High temperature fluid compatibility (MAX 350°C) Viscosity compatibility (10 to 1,000 mPa·s) Extensive lineup (1 to 207 cc/rev) Magnetic coupling compatible (zero liquid leakage, no need for shaft seal replacement) Bell housing compatible For more detailed information, please refer to the catalog or contact us directly.

• Other pumps

The "2950" is a volumetric flow meter that utilizes two oval-shaped rotors. Due to its volumetric principle, it can measure without being affected by changes in fluid viscosity. It is suitable for fluid applications where viscosity changes with temperature variations, such as lubricating oils, and can be used for lubricating oil monitoring, lubricating system management, and lubricating system protection. 【Common Specifications (Partial)】 ■ Flow visibility through a transparent cover ■ Operating pressure: MAX 1MPa ■ Operating temperature: 0–70℃ ■ Compatible viscosity: 30–1000 mPa·s ■ Accuracy: ±5% ■ Output: Open collector ■ Power supply: 10–30VDC *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The "FCP Series" is a volumetric single-screw eccentric pump (cavity pump) developed for high-precision application of paste materials. It features a structure that suppresses pulsation, achieving high-precision metering discharge. It can handle a wide range of fluids, including low to high viscosity fluids and liquids containing abrasives. Additionally, it prevents the alteration of liquids, enabling high-quality application. Drop-type application can be performed from a minimum of 0.0001 mL, and continuous application can be done from a width of 0.25 mm. The stator material can be selected from FKM or FFKM. 【Typical Applications】 ■ Filler application ■ Adhesive application ■ Coating ■ Sealing ■ UV resin application ■ Epoxy resin adhesive application ■ Thermal conductive material application ■ Insulating material application ■ Liquid gasket ■ Spray systems ■ Various two-component mixing, etc. *Testing with your fluid is also possible. If you are interested, please contact us via the <Contact Us> link. You can view the documentation for the exhibited products, including this product, from the <PDF Download> link.

• Other pumps

The "VS-HT" is a high-temperature gear meter suitable for automotive performance testing. The measurement method utilizes two circular gears as a volumetric flow meter, with gears detected by a specially developed MR element for high temperatures. Additionally, the preamplifier cable can be extended up to 5 meters, allowing experiments to be conducted within a high-temperature chamber. 【Features】 ■ Suitable for automotive performance testing ■ Measurement method utilizes two circular gears ■ Preamplifier cable can be extended up to 5 meters ■ Experiments can be conducted within a high-temperature chamber ■ Capable of measuring flow rates of high-temperature fluids up to 180°C ■ Capable of measuring flow rates under high-pressure conditions up to 45MPa 【Compatible Fluids】 Hydraulic oil, brake oil, epoxy, ATF oil, lubricants, grease, mineral oil, silicone oil, ink, polyol, paste, sealant, isocyanate, paint, sky-drol, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The RS-HT series high-temperature screw meter (helical meter) is a volumetric flow meter that utilizes a precisely machined pair of helical rotors (rotors). It is compatible with various liquids at temperatures ranging from -40 to +200°C, thanks to its high-temperature preamplifier system. 【Features】 - High and low temperature compatibility: -40 to +200°C - High precision - Low pressure loss - Fast response - High resolution - Compatible with high-viscosity fluids: 1 to 1,000,000 mm²/s - High pressure compatibility: MAX 45 MPa For more detailed information, please refer to the catalog or contact us directly.

• Flow Meter

The "RS Series" is a volumetric flow meter that utilizes a precisely machined pair of helical rotors (rotors). Due to its volumetric nature, it is unaffected by changes in the viscosity of the fluid passing through, allowing for highly accurate flow measurement. Its structure can keep pressure loss very low, and thanks to a uniquely developed preamplifier, the number of output pulses detected can achieve high-resolution output of up to 128 times. A new high-temperature pickup sensor (-40 to +200°C) has also been added to the lineup, making it suitable for inspecting various functional components and high-viscosity applications. 【Features】 ■ Measurement range: 0.04 to 2,500 L/min ■ Operating pressure: MAX 45 MPa ■ Operating temperature: -40 to +200°C ■ Compatible viscosity: 1 to 1,000,000 mm²/s *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Hydraulic Equipment
• Water Hydraulic Equipment

The VS601 is a lightweight and compact volumetric flow meter that features an aluminum body. It uses two circular gears, providing high resolution and the ability to handle high temperatures, high pressures, and viscous fluids. Its low price point makes it suitable for integration into devices and other applications. We also offer a two-phase output type equipped with two pickups (signal output elements) for special applications (e.g., detecting the forward and backward motion of a cylinder). 【Features】 ■ Maximum operating pressure: 20MPa ■ High resolution: 0.04mL/pulse ■ Compatible viscosity: 2 to 2,000 mPa·s ■ Low cost ■ Lightweight and compact ■ Supports both forward and reverse measurement 【Applicable fluids】 Hydraulic oil, oil, engine oil, epoxy resin, ink, water-glycol, various additives, urethane solvents *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials

The gear meter for painting, "VHM Series," is a volumetric flow meter developed for measuring painting fluids. A pair of circular gears rotates in proportion to the flow rate of the fluid passing through them, and this rotation is detected non-contact by a pickup (signal detector) mounted on the outside of the main body, which outputs a pulse signal externally via a preamplifier. 【Features】 ■ High-precision flow measurement is possible without being affected by changes in paint viscosity. ■ Compliant with domestic labor safety and explosion-proof standards. ■ Suitable for use in painting booths. ■ Lightweight, compact, simple design, and excellent cleanability. ■ For applications involving oil-based paints that require explosion-proof certification under domestic fire laws, we provide pickups and barriers that have obtained labor safety and explosion-proof certification. *For more details, please request materials or view the PDF data available for download.

• Flow Meter

The SRx series is equipped with 8 flow sensors in one block. The 8 volumetric flow meters of the 2950 series are unaffected by changes in viscosity, allowing for accurate flow measurement at a low cost. Additionally, the SR series includes flow adjustment valves for each unit, enabling visual monitoring of gear rotation (lubrication supply). The multi-channel display meter KLDS-8 allows for instant and cumulative digital display of oil shortages at branched supply points, and centralized management is possible through external alarm output and analog output. 【Benefits of Implementation】 Up to 8 flow meters can be installed in a single block (available in 3 types: 4, 6, or 8 units). When used in conjunction with a dedicated multi-channel display meter (compliant with drip-proof class IP65), "Alarm point settings" and "4-20mA analog output" are possible, making centralized management of lubrication points easy. For more detailed information, please refer to the catalog or contact us directly.

• Flow Meter

DARTec's high-precision micro gear pump is designed and manufactured to exhibit high precision, high reproducibility, and high efficiency performance tailored to actual usage conditions. It also accommodates special coatings for wear-resistant parts and heating. The robot-mounted model weighs 700g, making it compact and lightweight, ideal for use in mobile systems. The internal design of the pump is tailored to the type of fluid, differential pressure, viscosity, and more. It can handle corrosive fluids with coatings and special materials, allowing for a wide range of applications. 【Features】 - Rich discharge volume of "0.1–6mL/rev" (9 types) - Different models based on viscosity to accommodate various liquid properties - Custom designs tailored to customer applications are also possible (such as coatings for wear-resistant parts and packaging multiple pumps together) We also support the design and manufacture of dedicated models tailored to customer requests. Please feel free to contact us.

• Other pumps

The "MX Series" is a low-cost volumetric flow meter that uses oval gears. It features an intrinsically safe explosion-proof design suitable for hazardous locations (TIIS approved) and also offers a mechanical counter that does not require external power. The series includes 9 models with a maximum flow rate of up to 1200 L/min. The wetted materials can be selected from SUS316, aluminum, or PPS, making it suitable for applications involving fuels and chemical liquids, in addition to oil. 【Features】 ■ Low cost ■ Capable of measuring small quantities (0.5 L/h and up) ■ Intrinsically safe explosion-proof design (TIIS approved) ■ No external power required (internal battery, mechanical counter) 【Compatible Fluids】 ATF oil, engine oil, gasoline, kerosene, light oil, heavy oil, hydraulic oil, additives, alcohol, chemical liquids *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

The ZPD precision gear pump is an external type metering pump. It offers stable metering performance and is compatible with a wide range of temperatures and viscosities, making it suitable for various applications. 【Features】 Stable precision metering High-temperature fluid compatibility (MAX 350℃) High-viscosity fluid compatibility (MAX 1,000,000 mPa·s) Extensive lineup (0.003 to 900 L/min) Magnetic coupling compatible (zero liquid leakage, no need for shaft seal replacement) Bell housing compatible For more detailed information, please refer to the catalog or contact us directly.

• Other pumps

The magnet coupling "DST" transmits torque between the inner rotor and outer rotor non-contact, and is designed to prevent leakage with a barrier. Therefore, it can be used as a method to prevent liquid and gas leaks in pumps and agitators for hazardous liquids and gases, enabling the realization of equipment specifications that prioritize safety. It is suitable for new energy sources aimed at carbon neutrality, such as hydrogen, ammonia, and LNG! Additionally, it eliminates the need for maintenance and replacement of shaft seals, allowing for reduced work time. 【Features】 ■ ATEX explosion-proof certification ■ Non-contact torque transmission (synchronous rotation) ■ No liquid leakage ■ Various customizations available ■ Maintenance-free (no need for shaft seal replacement) ■ Torque: standard specification 1~1200Nm, customization: 0.1~25000Nm *For more details, please download the catalog or feel free to contact us.

• Sealing

The Roots-type gas meter "CGR Series" is a volumetric flow meter for gas measurement that utilizes two figure-eight shaped rotors. The measurement chamber containing the rotors is completely insulated from the outside. The motion of the rotors is transmitted to the display unit via a magnetic coupling, ensuring that the measuring fluid does not leak from the main body to the outside. Basically, it is a mechanical flow meter, so it can also measure flammable fluids (gases). 【Features】 ■ High precision ■ Low pressure loss ■ Mechanical operation ■ Compact design 【Applicable gases】 Air, hydrogen, argon, butane, carbon dioxide, ethane, ethylene, methane, propane, natural gas *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "RHM-L" is a Coriolis mass flow meter that can directly measure mass using two omega (Ω) shaped tubes. The high-precision measuring omega tubes can be selected from parallel and serial connections, allowing for optimal choices based on usage conditions. Additionally, the Leonic sensor can generate a strong natural frequency through its unique torsional vibration method. 【Features】 ■ Direct mass flow measurement ■ Compact design ■ Wide temperature range -196 to +210℃ ■ No moving parts ■ Abundant tube (contact liquid) materials [Super Duplex, Hastelloy, HP160] *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter
• Painting Machine
• Other semiconductors

The "HO Series" is a standard turbine meter that excels in linearity and reproducibility as measures of accuracy. Due to its wide range of operating temperatures, pressures, and measurement ranges, it is widely used in industries such as aerospace, automotive, cryogenics, and hydraulics. Additionally, the low pressure loss and high-speed response characteristic of standard turbine meters make them suitable for various test benches. 【Features】 ■ High precision ■ High-speed response ■ Low pressure loss ■ High temperature compatibility ■ High pressure compatibility ■ Lightweight/Compact 【Applicable Fluids】 Water, LLC coolant, engine oil, ATF oil, liquid oxygen, liquid nitrogen, Freon, solvents, aircraft hydraulic fluid, thermal oil, air, carbon dioxide *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials

This is a volumetric flow meter designed for hydraulic systems and high-pressure, high-viscosity applications. With the new feature of 128-fold high-resolution output, it is suitable for ultra-micro leak tests and various evaluation tests that were difficult to measure with conventional methods. 【Features】 - High precision measurement capability - High-resolution output - Principle unaffected by viscosity changes - Wide measurement range - Compatible with high-pressure fluids - Compatible with high-temperature fluids - Compatible with high-viscosity fluids - Can be mounted on a manifold For more detailed information, please refer to the catalog or contact us directly. 【Compatible Fluids】 Hydraulic oil, brake oil, epoxy, ATF oil, lubricants, grease, mineral oil, silicone oil, ink, polyol, paste, sealant, isocyanate, paint, sky-droll, etc.

• Other measurement, recording and measuring instruments

The "LC Series" is a general-purpose flow sensor designed to withstand harsh conditions. When fluid passes through, the internal rotor spins. The rotation speed is detected by a pick-off mounted on the outside of the main body. This rotation speed is proportional to the flow rate, and frequency pulses are output. The "F100" is a field-type display meter for "instantaneous flow/accumulated flow" exclusive to this series, and the "PET Series" is a dedicated transmitter. [Features] ■ Low cost ■ Compact ■ Capable of withstanding harsh conditions (MAX 120°C, MAX 24MPa) *For more details, please refer to the PDF materials or feel free to contact us.

• Piping Materials

We handle the digital display meter "FC Series." The multifunctional "FC21" instantly displays pulses from various flow sensors as well as cumulative totals. It is also capable of supporting applications that require fast response times for research and development purposes. The compact "FC41" is a digital display meter with a one-point scale, compatible with various types of flow sensors that have linear pulse output characteristics. 【FC21 Features】 ■ The analog output (0-10VDC) has high resolution (10,000 resolution) ■ The response speed is very fast, at less than 2 msec ■ It can support applications that require fast response times for research and development purposes ■ Options for analog output, ratio calculations, addition and subtraction, and other complex features are available ■ A preamplifier for turbine meters and linearization functions can also be equipped *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

The "NK Series" is a flow meter suitable for visual measurement of water and gas. At Japan Flow Control, we can accommodate manufacturing according to usage conditions, measurement ranges, materials, etc. Custom production for steam/sanitary applications is also available. We offer a wide range of products, including the general-purpose screw connection type "NK-AS" for water and air, and the rear screw connection type "NK-KV" suitable for small flow rates of liquids and gases, among others. 【Product Lineup】 ■ NK-AS: General-purpose screw connection type for water and air ■ NK-KV: Rear screw connection type suitable for small flow rates of liquids and gases ■ NK-A: General-purpose flange type ■ NK-AU: General-purpose screw-in type ■ NK-AJ: Type with a sanitary application suitable for a #400 buff polished inner and outer surface with a hygienic connection *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Piping Materials

The "C-RANGE" is an axial piston pump that boasts high discharge accuracy and allows for easy replacement of the shaft seal. It can handle high inflow pressures up to 2MPa, and there are no temperature changes at the inlet/outlet, ensuring a constant raw material temperature. It is specifically designed for polyurethane materials based on years of experience. Additionally, a magnetic coupling is available as an option. 【Features】 ■ Design specifically for polyurethane materials based on years of experience ■ High discharge accuracy ■ Easy replacement of the shaft seal ■ Magnetic coupling available as an option *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps