AQUASYSTEM Product Lineup

**HRP Series** HRP-25Z (for solvents) HRP-25ZM (for solvents / with hose and sealed adapter) ◎ Hand-cranked pump that does not require a power source ◎ Widely usable from household drums to factories ◎ Lightweight body made of resin ◎ Suction pipe can be cut **Benefits** ● Simple operation by just turning the handle ● Lightweight and easy to replace ● No power source required ● Can also dispense highly flammable organic solvents in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.1) ● Safe for highly volatile liquids with a sealed adapter (HRP-25ZM) ● Very useful in emergencies and disasters ● Can handle weak acids and weak alkali chemicals with resin material (HRP-25Z series) **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion; bending them excessively may cause tearing.*

• Other pumps

**HRP Series** HRP-25III (For solvents) HRP-25IIIH (For solvents / with hose) HRP-25IIIHM (For solvents / with hose, sealed adapter, and ground wire) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories ◎ Lightweight body made of resin ◎ Suction pipe can be cut **Advantages** ● Simple operation by just turning the handle ● Lightweight and easy to replace ● No power supply needed ● Can also dispense highly flammable organic solvents ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.1) ● Safe for highly volatile liquids with sealed adapter (HRP-25III HM) ● Great for emergencies and disasters **Features** ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and forcing them to bend may cause them to tear.*

• Other pumps

**HRD Series** HRD-25SUS (for solvents) HRD-25SUSH (for solvents / with hose) HRD-25SUSHM (for solvents / with hose, sealed adapter, and grounding wire) ◎ Hand-cranked pump that does not require a power source ◎ Can be widely used from household drums to factories ◎ Continuous pumping is possible ◎ Suction pipe can be cut **Benefits** ● Easy operation by simply turning the handle ● No power supply required ● Can dispense highly flammable organic solvents in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.5) ● Safe for highly volatile liquids with sealed adapter (HRD-25SUSHM) ● Very useful in emergencies and disasters **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Equipped with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and forcing them to bend may cause tearing.*

• Other pumps

◎Hand-cranked pump that requires no power source ◎Can be used without sealing the drum ◎Widely usable from household drums to factories ◎Inlet pipe can be cut 《Advantages》 ●Easy operation by simply turning the handle ●Discharges one drum in about 5 minutes ●No power supply needed ●Can be used with A heavy oil and low viscosity oils (below 500 cP) ●Very useful in emergencies and disasters 《Features》 ●Designed specifically for JIS standard 200L closed drums (large plug G2) ●Continuous pumping is possible ●Securely fixed to the drum with an adapter ●Includes a 60 mesh strainer *The material of the hose during replacement will be PVC (transparent). 《Mechanism of the Hand Rotary Pump》 This pump transfers liquid using internal vanes. It is operated by hand rotation for easy discharge and is designed for simple use.

• Other pumps

◎Hand-cranked pump that requires no power source ◎Can be used without sealing the drum ◎Widely usable from household drums to factories ◎Inlet pipe can be cut 《Advantages》 ●Easy operation by simply turning the handle ●No power supply needed ●Can be used with A heavy oil and low viscosity oil (below 500cP) ●Very useful in emergencies and disasters 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Continuous pumping is possible ●Securely fixed to the drum with an adapter ●No strainer *The material during hose replacement will be PVC (transparent). 《Mechanism of the Hand Rotary Pump》 This pump transfers liquid using internal vanes. It discharges by manual rotation, making it easy to operate.

• Other pumps

"FA Series" FA-100ATN (for kerosene and light oil / with auto-stop gun) FA-100K24 (for kerosene and light oil / with flow meter) FA-100ATNK24 (for kerosene and light oil / with auto-stop gun and flow meter) ◎ Koshin FA-100 Utilizes an impeller inside the suction pipe, allowing for efficient transfer of liquids from drums. ◎ Flow Meter and Auto-Stop Gun Specifications A lineup with flow meters and auto-stop guns is available for liquid management of kerosene and light oil. 《Benefits》 ● Compatible with FA-100 ● Available with flow meters and auto-stop guns for various applications 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● 30-minute rated ● Convenient household power AC-100V drum pump ● Equipped with relief valve

• Other pumps

"EVP Series" EVPH56-100 (for kerosene and light oil / both ends with hose) ◎ Flow meter and auto-stop gun specifications ◎ Customizable "Benefits" ● Maximum discharge rate of 46L per minute ● Available with flow meter and auto-stop gun, suitable for various applications ● Continuous operation possible "Features" ● Dedicated to JIS standard 200L closed drum (large plug G2) ● AC single-phase 100V (200V version also available) ● Built-in relief valve and 100μm filter ● Also available in a drum can type with hose connection ● Spiral centrifugal pump "How the Vane Pump Works" The center of the pump body is slightly offset from the center of the vane, creating a structure where the vanes operate due to centrifugal force. It adopts a principle of operation that increases pressure by reducing the volume with the vanes.

• Other pumps

"EVP Series" EVP56-100 (for kerosene and light oil / pump only) ◎ Flow meter and auto-stop gun specifications ◎ Customizable "Benefits" ● Maximum discharge rate of 46L per minute ● Available with flow meter and auto-stop gun, suitable for various applications ● Continuous operation possible "Features" ● Dedicated to JIS standard 200L closed drum (large cap G2) ● Single-phase AC 100V (200V version also available) ● Built-in relief valve and 100μm filter ● Also available in a hose connection type for drum cans ● Spiral centrifugal pump "Mechanism of Vane Pump" The center of the pump body is slightly offset from the center of the vane, creating a structure where the vanes operate due to centrifugal force. It adopts a principle of operation that increases pressure by reducing volume with the vanes.

• Other pumps

**EMM Series** EMM-25PP (for solvents) EMM-25SUS (for solvents) **Benefits** ● High discharge volume and high lift pressure-resistant explosion-proof motor pump ● Liquid transfer and small packaging in fire hazard areas ● High performance with 40L per minute and a lift height of 8m ● Suitable for transferring and small packaging of gasoline (EMM-25SUS) **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Equipped with a pressure-resistant explosion-proof motor (d2G3) ● For low viscosity liquids (below 50cp) *Note: The outlet is not explosion-proof.*

• Other pumps

**CHD Series** CHD-20HP (For Solvents) CHD-20HPV (For Solvents / With Ball Valve) CHD-20HPN (For Solvents / With Gun Nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only **Replacing the Motor Head** The head part (motor part) can be easily detached and replaced, allowing for the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and the pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding the Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid dispensing. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are present inside the nozzle).*

• Other pumps

**CHD Series** CHD-20PP (for solvents) CHD-20PPV (for solvents / with ball valve) CHD-20PPN (for solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing for the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid discharge. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

• Other pumps

**EMH Series** EMH-20FC (for oil, kerosene, diesel, biodiesel / pump only) EMH-20SUS (for oil, kerosene, diesel, biodiesel, solvents / pump only) EMHH-20FC (for oil, kerosene, diesel / both ends with hose) **Advantages** ● Continuous operation possible ● Can transfer kerosene and diesel without selecting containers ● Ideal for transferring biodiesel oil ● Low vibration and low noise **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Equipped with a relief valve (0.1MPa), vane pump ● Various customizations available for drum cans and hose connections *Note: The SUS type cannot be used with water or solvents.* **Mechanism of EMH Pump** The center of the pump body is slightly offset from the center of the impeller, creating a structure where the movable vanes extend due to centrifugal force. It adopts a principle of operation that increases pressure by reducing volume with the vanes. Additionally, the EMH series uses Teflon and fluorine for the packing, allowing for the transfer of biodiesel.

• Other pumps

"EVH Series" EVH-100 (for oil / 100V) EVH-200 (for oil / 200V) EVH-12 (for oil / 12V) EVH-100H (for oil / 100V) *Not suitable for kerosene, light oil, solvents, etc. ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable 《Benefits》 ● Can handle general oil VG400 and gear oil SAE140 at 15℃ ● High discharge pressure of 0.45MPa allows for use at heights or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EVH-100H is optimal for discharging large amounts of oil below 1,000cP 《Features》 ● Power supply options: AC100V, 200V (single phase) and DC12V ● Rated for 20 minutes *Please be careful as motor overheating can cause failure ● Maximum lift height of 30m ● Available in a drum can type with hose connection

• Other pumps

**EVD Series** EVD-100 (for oil / 100V) EVD-200 (for oil / 200V) EVD-12 (for oil / 12V) EVD-100H (for oil / 100V) *Not suitable for kerosene, light oil, solvents, etc.* ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable **Benefits** ● Capable of handling general oil VG400 and gear oil SAE140 at 15°C ● High discharge pressure of 0.45MPa allows for use at high locations or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EVD-100H is optimal for discharging large amounts of oil below 1,000cP **Features** ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Power supply options include AC100V, 200V (single phase), and DC12V ● Rated for 20 minutes *Please be cautious as prolonged use may cause motor burnout* ● Maximum lift height of 30m ● Also available in a drum can and hose connection type

• Other pumps

"EV Series" EV-100H (for oil / 100V) *Not suitable for kerosene, light oil, solvents, etc. ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable "Benefits" ● Capable of handling general oil VG400 and gear oil SAE140 at 15°C ● High discharge pressure of 0.45MPa allows for use at heights or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EV-100H is optimal for discharging large amounts of oil below 1,000 cP "Features" ● Power supply options include AC100V, 200V (single-phase), and DC12V ● Rated for 20 minutes *Please be cautious as motor overheating may cause failure ● Maximum lift height of 30m ● Available in drum-type and hose connection types

• Other pumps

"AMVH Series" AMH1D-20FC (For oil, kerosene, and light diesel / For drums) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Safe due to air-driven operation with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 15m ● Radial piston motor type vane pump ● Available in a hose connection type for drums "Mechanism of the Radial Piston Motor" A motor that operates by alternately compressing air into three pistons. With three pistons built-in, it is characterized by high discharge pressure. It can transfer high viscosity liquids (up to 2,000 cP) to heights and distances within 15m.

• Other pumps

"AMVH Series" AMH1-20FC (For oil, kerosene, diesel, biodiesel / Pump only) AMH1D-20FC (For oil, kerosene, diesel / For drums) AMH1H-20FC (For oil, kerosene, diesel / Hose at both ends) ◎ Explosion-proof design that does not use electricity ◎ Usable without sealing the drum ◎ Customizable "Benefits" ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Air-driven for safety without electric leakage ● Can operate continuously, usable as a circulation pump "Features" ● Maximum lift height of 15m ● Radial piston motor type vane pump ● Available in types for drums and hose connections "Mechanism of Radial Piston Motor" A motor that operates by alternately compressing air into three pistons. With three pistons built-in, it is characterized by high discharge pressure. Capable of transferring high-viscosity liquids (up to 2,000 cP) to heights and distances within 15m.

• Other pumps

ACH Series" ACH-20SUS (for solvents / pump only) ACHD-20SUS (for solvents / for drum cans) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum can ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air-driven operation, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Also available in a hose connection type for drum cans "How Centrifugal Pumps Work" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height difference, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• Other pumps

ACH Series" ACH-20AL (for kerosene and light oil / pump only) ACHD-20AL (for kerosene and light oil / for drums) ACHH-20AL (for kerosene and light oil / hose at both ends) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Available in types for drums and hose connections "How Centrifugal Pumps Work" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height differences, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• Other pumps

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Continuous operation possible 《Features》 ●Designed specifically for JIS standard 200L closed drums (large plug G2) ●Maximum lifting capacity of 50m ●Piston-type pump (with pulsation)

• Other pumps

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Continuous operation possible 《Features》 ●Designed specifically for JIS standard 200L closed drums (large plug G2) ●Maximum lifting capacity of 50m ●Piston-type pump (with pulsation)

• Other pumps

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Can be used as a circulation pump due to continuous operation capability 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●High lifting capacity ●Diaphragm pump (with pulsation)

• Other pumps

《DF Series》*AS, SUS DF4D-20AS (for solvents / for drums) DF6D-20AS (for solvents / for drums) DF6D-20SUS (for solvents / for drums) ◎ Explosion-proof design that does not use electricity ◎ Compatible with high-viscosity liquids ◎ Can be used without sealing the drum ◎ Powerful discharge 《Benefits》 ● Efficiently transfers high-viscosity liquids ● Safely transfers flammable liquids ● Ideal for horizontal and high-lift transfer ● Can be used as a circulation pump due to continuous operation capability 《Features》 ● Designed specifically for JIS standard 200L closed drums (large plug G2) ● High lifting capacity ● Diaphragm pump (with pulsation)

• Other pumps

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Can be used as a circulation pump due to continuous operation capability 《Features》 ●Designed specifically for JIS standard 200L closed drums (large plug G2) ●High lifting capacity ●Diaphragm pump (with pulsation)

• Other pumps

**CHD Series** CHD-20AHP (For solvents) CHD-20AHPV (For solvents / with ball valve) CHD-20AHPN (For solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Air-operated, eliminating concerns about electric leakage ● Air motor type with high discharge volume, non-pulsating ● Designed exclusively for discharge **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement.

• Other pumps

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual function for suction and discharge ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Includes grounding wire for static electricity prevention *Only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-use for suction and discharge ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Includes grounding wire for static electricity prevention *Only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-purpose for suction and discharge ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Equipped with an anti-static grounding wire *only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Compatible with high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate 《Benefits》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of minor foreign substances ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available in sanitary specifications with hygienic fittings ● Sanitary type has a proven track record for food use (APDQS-1s, 1.5s) * Not applicable under the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large plug G2) ● Closed drum vacuum type for suction only, discharge not possible ● Separate pressure reduction section (G3/4) and suction section (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can efficiently and safely collect without using electricity through an ejector mechanism. The collected drums can be handed directly to waste disposal companies. * Please contact the disposal company for disposal methods.

• Other pumps

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Compatible with high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate 《Benefits》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available with sanitary-grade ferrule fittings ● The sanitary type has a proven track record for food use (APDQS-1s, 1.5s) * Not applicable under the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Closed drum negative pressure type, suction only, no discharge ● Separate pressure reduction section (G3/4) and suction section (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can efficiently and safely collect without using electricity through an ejector mechanism. The collected drums can be handed directly to waste disposal companies. * Please contact the disposal company for disposal methods.

• Other pumps

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate 《Benefits》 ●Safely suction volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy to clean due to a structure that allows for disassembly ●Available with sanitary-grade ferrule fittings ●Sanitary type has a proven track record in food use (APDQS-1s, 1.5s) *Does not comply with the Food Sanitation Act 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Closed drum vacuum system for suction only, discharge not possible ●Separated pressure reduction section (G3/4) and suction section (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can safely and efficiently collect without using electricity thanks to the ejector mechanism. The collected drum can be handed directly to a waste disposal company. *Please contact the disposal company for disposal methods.

• Other pumps

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate 《Advantages》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available in sanitary-grade hygienic fittings ● Sanitary type has a proven track record in food use (APDQS-1s, 1.5s) *Does not comply with the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large plug G2) ● Closed drum vacuum system for suction only, discharge not possible ● Separate pressure reduction section (G3/4) and suction section (G2) 《Mechanism of Air Vacuum Pump》 This pump collects various liquids such as kerosene, diesel, oil, and chemicals from closed drums. It can efficiently and safely recover without using electricity through an ejector mechanism. The collected drums can be handed directly to waste disposal companies. *Please contact the disposal company for disposal methods.

• Other pumps

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Benefits》 ●Safely suction volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for drum cans, suction only, no discharge ●Equipped with an anti-static grounding wire (only for G and AS) ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside from the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and draws in external air 5. Liquid is suctioned from the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping the suction

• Other pumps

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Safely suction volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for suction only, not for discharge ●Equipped with an anti-static grounding wire (for G and AS only) ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside from the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure, drawing in external air 5. Liquid is suctioned through the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

• Other pumps

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Safely suction volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for suction only, discharge not possible ●Equipped with an anti-static grounding wire *Only for G and AS ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge externally from the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and sucks in external air 5. Liquid is suctioned from the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

• Other pumps

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-efficient ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large plug G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with a regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• Other pumps

◎Explosion-proof design without electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Advantages》 ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-efficient ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separate

• Other pumps

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored sealed ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with small amounts of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated for JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• Other pumps

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate ◎Efficient liquid discharge ◎Discharge method can also be selected 《Benefits》 ●Minimal residual liquid (approximately 200cc), capable of efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Designed for discharge only with sealed pressurized drums, not for recovery ●Double pressure reduction with a regulator and safety valve for added safety ●Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of the Air Pressure Pump》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Advantages》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate ◎Efficient liquid discharge without waste ◎Discharge method can also be selected 《Advantages》 ●Minimal residual liquid (about 200cc), can discharge without waste ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for added safety ●Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Compatible with high-viscosity liquids ◎Can be stored in a sealed manner ◎Low failure rate ◎Can be used for both discharge and suction 《Benefits》 ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation driven by a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable with a small amount of foreign matter contamination ●Continuous operation possible ●Easy to clean due to a structure that allows for disassembly ●Available in sanitary-grade hygienic fittings ●Sanitary type has a proven track record in food applications (APDS-1s, 1.5s) *Does not comply with the Food Sanitation Act. 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Designed for discharge only with sealed pressurized drum, not for recovery ●Double pressure reduction with regulator and safety valve for peace of mind ●Pressure section (G3/4) and discharge section (G2) are separated

• Other pumps

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable with small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and inhale liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps