AQUASYSTEM Product Lineup

◎Acquired AdBlue license in 2011 AdBlue: Trademarked product 《Benefits》 ● Flow rate can be checked at hand with a flow meter ● Automatic stop when the small container is full 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● For IBC containers ● Power supply is AC100V ● Lightweight resin flow meter integrated nozzle with nozzle storage 《What is AdBlue?》 High-quality urea water AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied just like fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• Other pumps

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product ◎Flow meter and auto-stop gun specifications 《Benefits》 ● Complies with PSE (Electrical Appliance and Material Safety Law) ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed ● Can be refilled in places without power or air ● Can dispense approximately 6 barrels after charging 《Features》 ● For IBC containers ● Lithium-ion charging (charging time: 2 hours) ● Maximum discharge rate: HIGH: 30L/min ● Continuous usage time: HIGH: 20 minutes, LOW: 40 minutes 《What is AdBlue?》 High-quality urea solution AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied just like fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of diesel vehicle clean performance.

• Other pumps

◎AdBlue license obtained in 2011 AdBlue: Trademarked product ◎Flow meter specifications 《Advantages》 ● Lightweight and compact ● Flow meter can also be installed ● Continuous operation possible 《Features》 ● PSE (Electrical Appliance and Material Safety Law) compliant ● For IBC containers ● Air motor ● Maximum discharge head of 3m, maximum discharge rate of 25L/min ● Standard equipped with circuit breaker (automatic stop for heat and overcurrent) * Reset by pressing the breaker 《What is AdBlue?》 High-quality urea water AdBlue is a urea aqueous solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides must supply AdBlue in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• Other pumps

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product ◎Flow meter and auto-stop gun specifications 《Benefits》 ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● For IBC containers ● Power supply is AC100V ● Maximum discharge head of 5m, maximum discharge rate of 30L/min ● Standard equipped with circuit breaker (automatic stop for heat and overcurrent) * It can be reset by pressing the breaker 《What is AdBlue?》 High-quality urea water AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides must supply AdBlue in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• Other pumps

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product ◎Flow meter and auto-stop gun specifications 《Benefits》 ● Lightweight and compact ● Compatible with auto-stop guns and flow meters ● Can be refilled in places without power or air ● Can dispense approximately 6 drums after charging 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● Designed specifically for JIS standard 200L closed drums (large cap G2) *Optional adapters made of Kodama resin and Sankoh are also available ● Lithium-ion charging (charging time: 2 hours) 《What is AdBlue?》 High-quality urea solution AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• Other pumps

◎AdBlue license obtained in 2011 AdBlue: Trademarked product ◎Flow meter specifications 《Advantages》 ● Lightweight and compact ● Flow meter can also be installed ● Continuous operation possible 《Features》 ● PSE (Electrical Appliance and Material Safety Law) compliant ● Dedicated for JIS standard 200L closed drum (large cap G2) * Optional specifications available with Kodama resin or Sanko adapters ● Air motor ● Maximum discharge head of 3m, maximum discharge volume of 25L/min ● Standard equipped with circuit breaker (automatic stop for heat and overcurrent) * Reset by pressing the breaker. 《What is AdBlue?》 High-quality urea solution AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of diesel vehicles' clean performance.

• Other pumps

◎Obtained AdBlue license in 2011 AdBlue: Trademarked product ◎Flow meter and auto-stop gun specifications 《Benefits》 ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed 《Features》 ● Compliant with PSE (Electrical Appliance and Material Safety Law) ● Dedicated to JIS standard 200L closed drums (large cap G2) * Optional specifications available with Kodama resin or Sanko adapters ● Power supply is AC100V ● Maximum discharge head of 5m, maximum discharge volume of 30L/min ● Standard equipped with circuit breaker (automatic stop for heat and overcurrent) * Can be reset by pressing the breaker. 《What is AdBlue?》 High-quality urea water AdBlue is a urea water solution with a concentration of 32.5%. It is colorless, transparent, and harmless to humans and animals. Diesel vehicles that adopt a urea SCR system to reduce nitrogen oxides require AdBlue to be supplied in the same way as fuel. By injecting urea water into the exhaust to mix with NOx, it decomposes NOx into nitrogen and water, contributing to the improvement of the clean performance of diesel vehicles.

• Other pumps

◎Emergency water supply pump ◎Easy to operate ◎Standing action type 《Benefits》 ● Performance of 4m suction (no priming required) and 7m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Allows for work while standing ● Large capacity of 2,000cc per stroke 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency standby equipment for ships and boats ● Rainwater utilization system for households ● Waste cooking oil collection 《As an emergency pump》 ● Capable of suctioning up to the 2nd or 3rd floor of a building ● Usable for refueling emergency power supplies on building rooftops ● For transferring toilet water or water tanks in emergencies

• Other pumps

◎Emergency water supply pump ◎Easy to operate ◎Standing action type 《Benefits》 ● Performance of 5m suction (no priming required) and 7m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Work can be done while standing ● Hose attachment and detachment is easy with lever coupling 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency equipment for ships and boats ● Rainwater utilization system for households ● Waste cooking oil collection 《Set Contents》 ● Diaphragm pump: ST-HDOS-32 (40) ALB: 1 unit ● Lever couplings: 2 pieces (32・40) ● Strainer: 1 piece ● Discharge hose: 1 piece, 5m with coupler (Φ32・Φ38) ● Suction hose: 1 piece, 3m with coupler (Φ32・Φ38) ● Handle: 1 piece

• Other pumps

◎Emergency water supply pump ◎Easy to operate ◎Standing action type 《Benefits》 ● Performance of 5m suction (no priming needed) and 7m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Allows work to be done while standing 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency equipment for ships and boats ● Rainwater utilization system for households ● Used cooking oil collection 《As an emergency pump》 ● Can suction up to the 2nd or 3rd floor of a building ● Can be used for refueling emergency power supply on building rooftops ● For transferring toilet water or water tanks in emergencies

• Other pumps

◎Emergency water supply pump ◎Easy to operate 《Benefits》 ● Performance of 5m suction (no priming required) and 7m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil 《Features》 ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble 《Applications》 ● Water supply and drainage pump for emergencies ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency equipment for ships and boats ● Rainwater utilization system for households ● Used cooking oil collection

• Other pumps

**HDO Series** HDO-20ALA (For oil, kerosene, diesel, and water / Hose nipple specification) HDO-20(25)ALB (For oil, kerosene, diesel, and water / Screw connection specification) HDO-20ALOZ (For oil, kerosene, diesel, and water / Coupler connection specification) ◎ For emergency water supply pump ◎ Easy to operate **Benefits** ● Suction performance of 8m (no priming required) and discharge of 8m ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil **Features** ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble **Applications** ● Water supply and drainage pump for disaster situations ● Emergency waste liquid pump for facilities such as factories ● Pump for construction and civil engineering work ● Fuel supply pump for various vehicles and machinery ● Maintenance for machinery and various facilities ● Bilge pump and emergency standby equipment for ships and boats ● Rainwater utilization system for households ● Waste cooking oil collection

• Other pumps

◎Emergency water supply pump ◎Liquid transfer ◎Material of the frame 《Advantages》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Two types: screw-type phase flange and JIS standard round flange ※ No phase flange for JIS 5K type and JIS 10K type ● Separate options available for bronze (for oil) and gasoline specifications 《Set contents》 ● Frame: 1 unit ● Wing pump: available with 1 or 2 units ● Male couplings: 1 each for suction and discharge ※ Hose and female couplings are not included 《Regarding pipe orientation》 The wing pump cannot be used with the pipe orientation changed. Please install the suction side down and the discharge side up. The valve is designed to close under its own weight, and if placed sideways or upside down, the valve will not close, preventing liquid from being discharged. 《Difference between Yatsunami and King》 The King has a lower discharge volume compared to the Yatsunami. Additionally, the King does not have a round flange type or all-bronze type.

• Other pumps

◎Air-driven ◎Compatible with high-viscosity liquids 《Benefits》 ● Efficient transfer of medium-viscosity liquids ● Usable with flammable liquids and small amounts of foreign matter ● Ideal for horizontal and high-lift transfer 《Features》 ● Continuous operation possible ● Lifting capacity of 20-30m *Please be sure to use an air filter and lubricator.

• Other pumps

◎Air-driven ◎Compatible with high-viscosity liquids 《Benefits》 ●Efficiently transfers medium-viscosity liquids ●Can be used with flammable liquids and small amounts of foreign matter ●Ideal for horizontal and high-lift transfers 《Features》 ●Continuous operation possible ●Lifting capacity of 20-30m *Please be sure to use an air filter and lubricator.

• Other pumps

◎Air-driven ◎Two types: plastic and stainless steel 《Advantages》 ● Safely transfers highly flammable liquids ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with plastic cans and one-gallon cans 《Features》 ● Comes with a ball valve ● Available in two types: stainless steel and plastic *Please be sure to use an air filter and lubricator.

• Other pumps

◎Electric 100V ◎Two types: made of resin and stainless steel 《Advantages》 ● Usable anywhere with a 100V power source ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with plastic cans and one-gallon cans 《Features》 ● With ball valve ● Two types: stainless steel and resin

• Other pumps

◎Manual pump that requires no power source ◎Compatible with high-viscosity liquids 《Advantages》 ● No power supply needed ● For high-viscosity liquids (up to 10,000 cP) ● Can dispense oils that become solid in winter ● SUS model compatible with various solvents (P-SX, P-SXT) ● Extremely useful in emergencies and disasters 《Features》 ● For 41mm outer diameter of pails and drums (40mm adapter included as standard) *Optional 50mm adapter also available ● Continuous pumping is possible ● Discharges when the piston is pulled up using an up-and-down piston mechanism *For high-viscosity liquids, please pull the handle up slowly.

• Other pumps

◎Manual pump that requires no power source ◎Compatible with high-viscosity liquids 《Advantages》 ● No power supply needed ● For high-viscosity liquids (up to 10,000 cP) ● Can dispense oils that become hard in winter ● SUS construction compatible with various solvents (P-SX, P-SXT) ● Very useful in emergencies and disasters 《Features》 ● For 41mm outer diameter of pails and one-gallon cans (standard 40mm adapter included) *Optional 50mm adapter also available ● Continuous pumping is possible ● Discharges when the piston is pulled up using an up-and-down piston mechanism *For high-viscosity liquids, please pull the handle up slowly.

• Other pumps

◎Simple structure with no failures ◎Easy to operate ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available closed pail can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Designed for JIS standard 20L closed pail cans ●Can be used with air compressors of 1 horsepower (0.75kw) or more ●Outer diameter dimension of the can opening (for 41mm)

• Other pumps

◎Simple structure with no failures ◎Easy to operate ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available closed pail can ●Continuous operation possible ●Less prone to breakage compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Designed for JIS standard 20L closed pail cans ●Can be used with air compressors of 1 horsepower (0.75kw) or more ●Outer diameter dimension of the can opening (for 41mm)

• Other pumps

◎Simple structure that is trouble-free ◎Easy to operate ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available closed pail can ●Continuous operation is possible ●Less prone to breakage compared to electric models ●Air-driven, so it's safe in explosion-proof areas with no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Designed for JIS standard 20L closed pail cans ●Can be used with air compressors of 1 horsepower (0.75kw) or more ●Outer diameter dimension of the can opening (for 41mm)

• Other pumps

◎Simple structure, no worries about breakdowns ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Can suck up one pail in about 15 seconds ●Continuous operation possible ●Less prone to breaking compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Compatible with JIS standard 20L open pail (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

• Other pumps

◎Simple structure, no worries about breakdowns ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Can suck up one pail in about 15 seconds ●Continuous operation possible ●Less prone to breaking compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1 and plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

• Other pumps

◎Simple structure, no worries about breakdowns ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Sucks up one pail in about 15 seconds ●Can operate continuously ●Less likely to break compared to electric models ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Liquid only (general oils, etc.) ●Compatible with JIS standard 20L open pail (recommended for top outer diameter of 300mm±1 and plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 1 horsepower (0.75kw) or more

• Other pumps

◎Compatible with high-viscosity liquids due to vacuum pressure type ◎Simple structure with no failures ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a stainless steel can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Liquid-specific (general oils, etc.) ●Recommended for stainless steel cans (APPQO-SK) ●Automatic stop when the liquid is full ●Can be used with air compressors of 5 horsepower (3.75 kW) or more

• Other pumps

◎Compatible with high-viscosity liquids due to vacuum pressure type ◎Simple structure with no failure ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used just by placing it on a stainless steel can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For liquids only (general oils, etc.) ●Recommended for stainless steel cans (APPQO-SK) ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75 kW) or more

• Other pumps

◎Compatible with high-viscosity liquids due to vacuum pressure type ◎Simple structure with no failures ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a stainless steel can ●Continuous operation possible ●Less prone to breakage compared to electric types ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Liquid-specific (general oils, etc.) ●Recommended for stainless steel cans (APPQO-SK) ●Automatic stop when the liquid is full ●Can be used with air compressors of 5 horsepower (3.75 kW) or more

• Other pumps

◎Easy operation ◎Continuous operation possible ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available drum ●Continuous operation possible ●Can be used as both a wet and dry vacuum and an inhalation pump 《Features》 ●For collection only (general oil, oil, chips, etc.) ●JIS standard 20L open drum (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with a 100V power supply, making it versatile for any location ●Also available in 200V specifications *Please regularly clean the filter inside the cover 《Applications》 Cleaning around equipment in automotive maintenance shops and vehicles Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Collection of cutting and cutting oils in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Collection of sludge and wastewater from septic tanks and pits Collection of welding spatter Collection of grease traps and floating oil

• Other pumps

◎Easy operation ◎Continuous operation possible ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available drum ●Continuous operation possible ●Can be used as both a wet and dry vacuum and an intake pump 《Features》 ●Dedicated for collection (general oil, oil, metal shavings, etc.) ●Compatible with JIS standard 20L open drums (recommended outer diameter of top 300mm±1, plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with a 100V power supply, making it versatile for any location ●Also available in 200V specification *Please regularly clean the filter inside the cover 《Applications》 Cleaning around equipment in automotive maintenance shops and vehicles Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and metal shavings in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

◎Simple structure, no breakdowns ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Continuous operation possible ●Less prone to breakdown compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Dedicated for dust collection ●Compatible with JIS standard 20L open pail (recommended outer diameter of top 300mm±1, plate thickness of 0.4mm or more) ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Standard equipped with grounding wire ●Uses anti-static hose ●Can also be used with cyclone-type drums of 50L, 100L, and 200L *Not to be used for materials that pose a risk of dust explosion (metal powder, aluminum powder, toner, etc.) *As it is an industrial vacuum cleaner, it cannot be used for powders that directly enter the human body (food powders, medicines, etc.)

• Other pumps

◎Simple structure, no failures ◎Easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail (stainless can (APPQO-SK) recommended) ●Continuous operation possible ●Can be used as both a wet and dry vacuum and an intake pump ●Less likely to break compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Dedicated for collection (general oil, water, oil, metal shavings, etc.) ●JIS standard 20L open pail can (recommended for top outer diameter of 300mm±1, plate thickness of 0.4mm or more) *Stainless can (APPQO-SK) recommended ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM

• Other pumps

◎Simple structure, no failures ◎Easy operation ◎Convenient options 《Advantages》 ●Can be used simply by placing it on a commercially available pail (stainless can (APPQO-SK) recommended) ●Continuous operation possible ●Can be used as both a wet and dry vacuum and an intake pump ●Less prone to breakage compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●Dedicated for collection (general oil, water, oil, metal shavings, etc.) ●JIS standard 20L open pail can (recommended for top outer diameter of 300mm±1, plate thickness of 0.4mm or more) *Stainless can (APPQO-SK) recommended ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM

• Other pumps

◎ Simple structure, trouble-free ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump for wet and dry applications and a vacuum cleaner ● Less likely to break compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pail (recommended outer diameter of top 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oil in metal processing Cleaning in shipyards and bilge areas of ships Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• Other pumps

◎ Simple structure, no breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater in septic tanks and pits Collection of welding spatter

• Other pumps

◎ Simple structure, no breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet/dry vacuum and an intake pump ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no fire risk 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• Other pumps

◎ Simple structure, no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breaking compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pail (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• Other pumps

"Just place it and it's ready to use. Anyone can use it immediately. Just plug it in and it's ready to go." ◎ Simple structure with no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an inhalation pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, cutting chips, etc.) ● Compatible with JIS standard 20L open pails (recommended for top outer diameter 300mm±1, plate thickness 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment in automotive maintenance shops and vehicles Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oil in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

"Just place it and it's ready to use. Anyone can use it right away. Just plug it in and it's ready to go." ◎ Simple structure, no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breaking compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, chips, etc.) ● Compatible with JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

"Just place it and it's ready to use. Anyone can use it immediately. Just plug it in and it's ready to go." ◎ Simple structure with no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an inhalation pump ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oils, cutting chips, etc.) ● Compatible with JIS standard 20L open pails (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

◎ Simple structure, no worries about breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

◎Simple structure, no worries about breakdowns ◎Equipped with new features for greater convenience and easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Continuous operation possible ●Can be used as both a wet and dry vacuum pump ●Less prone to breakage compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For collection only (general oil, oils, metal shavings, etc.) ●Compatible with JIS standard 20L open pails (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

◎ Simple structure, no risk of failure ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-prone areas, no risk of ignition 《Features》 ● Designed for collection only (general oil, oils, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and shavings in metal processing Cleaning in shipyards and bilge areas of ships Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

"Straight Series" S-LX (for solvents) S-LXHS (for solvents / with hose) ◎ Hand piston pump that requires no power source ◎ Compatible with high-viscosity liquids ◎ Continuous pumping possible with siphon function "Benefits" ● No power supply needed ● Suitable for high-viscosity liquids (up to 10,000 cP) with a specific gravity of 1.5 or less ● Can dispense oils that become hard in winter (S-L series) ● Very useful in emergencies and disasters "Features" ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Continuous pumping capability ● Discharges when the piston is pulled up using an up-and-down piston mechanism * Please pull the handle slowly for high-viscosity liquids ● Siphon works for low-viscosity liquids ● Discharge volume per stroke is 600 cc "Mechanism of the piston pump" It is a mechanism that discharges simply by attaching it to a drum and moving the upper piston up and down. It discharges when the upper piston is pulled up. The discharge volume per stroke is 600 cc. This pump is suitable for extracting small amounts of liquid from a drum. Its simple structure is characterized by low failure rates.

• Other pumps

"Straight Series" S-L (for oil) S-LH-1 (for oil / with hose) ◎ Hand piston pump that requires no power source ◎ Suitable for high-viscosity liquids ◎ Continuous pumping possible with siphon function "Benefits" ● No power supply needed ● Compatible with high-viscosity liquids (up to 10,000 cP) with a specific gravity of 1.5 or less ● Can dispense winter oils that become thick (S-L series) ● Very useful in emergencies and disasters "Features" ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Continuous pumping possible ● Discharges when the piston is pulled up using an up-and-down piston mechanism * For high-viscosity liquids, please pull the handle up slowly ● Siphon works for low-viscosity liquids ● Discharge volume per stroke is 600cc "Mechanism of the piston pump" It is a mechanism that discharges simply by attaching it to a drum and moving the upper piston up and down. It discharges when the upper piston is pulled up. The discharge volume per stroke is 600cc. This pump is suitable for extracting small amounts of liquid from a drum. Its simple structure is characterized by low failure rates.

• Other pumps