AQUASYSTEM Product Lineup

"EVD Series" EVD-100 (for oil / 100V) EVD-200 (for oil / 200V) EVD-12 (for oil / 12V) EVD-100H (for oil / 100V) *Not suitable for kerosene, light oil, solvents, etc. ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable "Benefits" ● Can handle general oil VG400 and gear oil SAE140 at 15°C ● High discharge pressure of 0.45MPa allows for high elevation and long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EVD-100H is optimal for discharging large amounts of oil below 1,000cP "Features" ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Power supply options are AC100V, 200V (single phase), and DC12V ● Rated for 20 minutes *Please be cautious as prolonged use may cause motor burnout ● Maximum lift height of 30m ● Also available in a drum can and hose connection type

• Other pumps

"EVD Series" EVD-100 (for oil / 100V) EVD-200 (for oil / 200V) EVD-12 (for oil / 12V) EVD-100H (for oil / 100V) *Not suitable for kerosene, light oil, solvents, etc. ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable 《Benefits》 ● Capable of handling general oil VG400 and gear oil SAE140 at 15℃ ● High discharge pressure of 0.45MPa allows for use in high places or over long distances ● Lever coupling type allows for quick attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EVD-100H is optimal for discharging large amounts of oil below 1,000 cP 《Features》 ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Power supply options are AC100V, 200V (single phase), and DC12V ● Rated for 20 minutes *Please be cautious as motor overheating can cause failure ● Maximum lift height of 30m ● Also available in a drum can and hose connection type

• Other pumps

"EVD Series" EVD-100 (for oil / 100V) EVD-200 (for oil / 200V) EVD-12 (for oil / 12V) EVD-100H (for oil / 100V) *Not suitable for kerosene, light oil, solvents, etc. ◎ Three types to suit your needs ◎ Compatible with high-viscosity liquids ◎ Customizable 《Benefits》 ● Can handle general oil VG400 and gear oil SAE140 at 15℃ ● High discharge pressure of 0.45MPa allows for use at heights or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EVD-100H is optimal for discharging large amounts of oil below 1,000cP 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Power supply options include AC100V, 200V (single phase) and DC12V ● Rated for 20 minutes *Please be cautious as the motor may overheat and fail ● Maximum lift height of 30m ● Also available in a drum can type with hose connection

• Other pumps

"APD Series Discharge Only" APD-20(25)GATN (for kerosene and light oil / with auto-stop gun) "Benefits" ● Automatically stops when full, preventing overflow ● Minimal residual liquid (about 200cc), allowing for efficient discharge ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption for energy savings ● Accepts small amounts of foreign matter ● Continuous operation possible "Features" ● Equipped with an auto-stop gun ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Discharge only with sealed pressurized drum, not for recovery ● Double pressure reduction with regulator and safety valve for peace of mind ● Ground wire for static electricity prevention (only for G, AS, SUS types)

• nozzle

"EV Series" EV-12 (for oil / 12V) *Not suitable for kerosene, light oil, solvents, etc. ◎ Three types to suit different applications ◎ Compatible with high-viscosity liquids ◎ Customizable "Benefits" ● Capable of handling general oil VG400 and gear oil SAE140 at 15°C ● High discharge pressure of 0.45MPa allows for use in high places or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EV-100H is optimal for discharging large amounts of oil below 1,000cP "Features" ● Power supply options are AC100V, 200V (single phase), and DC12V ● Rated for 20 minutes *Please be cautious as motor overheating may cause failure ● Maximum lift height of 30m ● Available in drum can and hose connection types

• Other pumps

"EV Series" EV-200 (for oil / 200V) *Not suitable for kerosene, light oil, solvents, etc. ◎ Three types to suit different applications ◎ Compatible with high-viscosity liquids ◎ Customizable "Benefits" ● Can handle general oil VG400 and gear oil SAE140 at 15°C ● High discharge pressure of 0.45MPa allows for use at heights or over long distances ● Lever coupling type allows for one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EV-100H is optimal for discharging large amounts of oil below 1,000 cP "Features" ● Power supply options are AC100V, 200V (single-phase), and DC12V ● Rated for 20 minutes* Please be careful as motor overheating may cause failure ● Maximum lift height of 30m ● Available in drum can and hose connection types

• Other pumps

"EV Series" EV-100 (for oil / 100V) *Not suitable for kerosene, light oil, solvents, etc. ◎ Three types to suit different applications ◎ Compatible with high-viscosity liquids ◎ Customizable "Benefits" ● Capable of handling general oil VG400 and gear oil SAE140 at 15°C ● High discharge pressure of 0.45MPa allows for use in high places or over long distances ● Lever coupling type for easy one-touch attachment and detachment ● Options for flow meters and manual nozzles available for various applications ● EV-100H is optimal for discharging large amounts of oil below 1,000 cP "Features" ● Power supply options include AC100V, 200V (single-phase), and DC12V ● Rated for 20 minutes *Please be cautious as motor overheating can cause failure ● Maximum lift height of 30m ● Available in drum-type and hose connection types

• Other pumps

ACH Series" ACHH-20AL (for kerosene and light oil / hose on both ends) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air-driven operation with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Available in a hose connection type for drums "How a Centrifugal Pump Works" A centrifugal pump uses a spiral-shaped impeller that rotates at high speed inside to utilize centrifugal force, making it suitable for drawing low-viscosity liquids with minimal height differences. It is also referred to as a "spiral pump.

• Other pumps

"AMVH Series" AMH1H-20FC (For oil, kerosene, and light diesel / Hose at both ends) ◎ Explosion-proof design that does not use electricity ◎ Usable without sealing the drum ◎ Customizable "Benefits" ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Air-driven for safe operation without electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 15m ● Radial piston motor type vane pump ● Available in a hose connection type for drums "Mechanism of Radial Piston Motor" A motor that operates by alternately compressing air into three pistons. With three pistons built-in, it is characterized by high discharge pressure. It can transfer high viscosity liquids (up to 2,000 cP) to heights and distances within 15m.

• Other pumps

"AMVH Series" AMH1D-20SUS (For Solvent / Drum Can) ◎ Explosion-proof design that does not use electricity ◎ Usable without sealing the drum can ◎ Customizable "Advantages" ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Air-driven for safety without electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 15m ● Radial piston motor type vane pump ● Also available in a hose connection type for drum cans "Mechanism of Radial Piston Motor" A motor that operates by alternately compressing air into three pistons. With three pistons built-in, it is characterized by high discharge pressure. It can transfer high viscosity liquids (up to 2,000 cP) to heights and distances within 15m.

• Other pumps

**AMVH Series** AMH1-20FC (for oil, kerosene, diesel, biodiesel / pump only) AMH1-20SUS (for solvents / pump only) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable **Benefits** ● Capable of transferring medium viscosity liquids (up to 2,000 cP) ● Safe due to air-driven operation, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability **Features** ● Maximum lift height of 15m ● Radial piston motor type vane pump ● Also available in a hose connection type for drums **Mechanism of the Radial Piston Motor** A motor that operates by alternately compressing air into three pistons. With three pistons built in, it is characterized by high discharge pressure. It can transfer high viscosity liquids (up to 2,000 cP) within a height and distance of 15m.

• Other pumps

**AMVH Series** AMVHD-20SUS (For solvents / For drums) ◎ Explosion-proof design that does not use electricity ◎ Usable without sealing the drum ◎ Customizable **Benefits** ● Capable of transferring medium viscosity liquids (up to 1500 cP) ● Safe due to air-driven operation, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability **Features** ● Designed specifically for JIS standard 200L closed drums (large plug G2) ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Also available in a hose connection type for drums **Mechanism of the Vane Motor** This motor uses compressed air to move the blades like a windmill. It is capable of maintaining a certain rotational speed. It can transfer medium viscosity liquids (up to 1500 cP) to heights and distances within 10m. The center of the pump body is slightly offset from the center of the impeller, creating a structure where the vanes operate due to centrifugal force.

• Other pumps

"AMVH Series" AMVH-20FC (For oil, kerosene, and diesel / Pump only) AMVHD-20FC (For oil, kerosene, and diesel / For drums) AMVHH-20FC (For oil, kerosene, and diesel / Hose at both ends) [For oil, kerosene, and diesel / Pump only, drum use, hose at both ends] ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable [Advantages] ● Capable of transferring medium viscosity liquids (up to 1500 cP) ● Safe due to air-driven operation, no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability [Features] ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Also available in drum and hose connection types [How the vane motor works] It is a motor that uses compressed air to move the blades like a windmill. It is a motor that can maintain a certain rotation speed. It can transfer medium viscosity liquids (up to 1500 cP) within a height and distance of 10m. The center of the pump body is slightly offset from the center of the impeller, creating a structure where the vanes operate due to centrifugal force.

• Other pumps

"AMVH Series" AMVH-20FC (For oil, kerosene, and light diesel / Pump only) AMVHD-20FC (For oil, kerosene, and light diesel / For drum cans) AMVHH-20FC (For oil, kerosene, and light diesel / Hose at both ends) [For oil, kerosene, and light diesel / Pump only, drum can use, hose at both ends] ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum can ◎ Customizable [Benefits] ● Capable of transferring medium viscosity liquids (up to 1500 cP) ● Safe due to air-driven operation, no electric leakage ● Can be used as a circulation pump due to continuous operation capability [Features] ● Dedicated to JIS standard 200L closed drum cans (large plug G2) ● Maximum lift height of 5m ● Spiral type centrifugal pump ● Available in types for drum cans and hose connections [How the vane motor works] It is a motor that uses compressed air to move the blades like a windmill. It is a motor that can maintain a certain rotation speed. It can transfer medium viscosity liquids (up to 1500 cP) to a height and distance within 10m. The center of the pump body is slightly offset from the center of the impeller, creating a structure where the vanes operate due to centrifugal force.

• Other pumps

ACH Series" ACHD-20AL (for kerosene and light oil / for drums) ◎ Explosion-proof design that does not use electricity ◎ Usable without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air-driven operation, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Available in a hose connection type for drums "How a Centrifugal Pump Works" A centrifugal pump features an impeller shaped like a spiral that rotates at high speed internally, utilizing centrifugal force to draw up low-viscosity liquids with minimal height difference. It is also referred to as a "spiral pump.

• Other pumps

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Can be used as a circulation pump due to continuous operation capability 《Features》 ●Designed specifically for JIS standard 200L closed drums (large plug G2) ●High lifting capacity ●Diaphragm pump (with pulsation)

• Other pumps

"DF Series" *AS, SUS DF4D-20AS (for solvents / for drums) DF6D-20AS (for solvents / for drums) DF6D-20SUS (for solvents / for drums) ◎ Explosion-proof design that does not use electricity ◎ Compatible with high-viscosity liquids ◎ Can be used without sealing the drum ◎ Powerful discharge "Benefits" ● Efficiently transfers high-viscosity liquids ● Safely transfers flammable liquids ● Ideal for horizontal and high-lift transfer ● Can be used as a circulation pump due to continuous operation capability "Features" ● Dedicated to JIS standard 200L closed drums (large plug G2) ● High lifting capacity ● Diaphragm pump (with pulsation)

• Other pumps

"DF Series" *AS, SUS DF4D-20AS (for solvents / for drums) DF6D-20AS (for solvents / for drums) DF6D-20SUS (for solvents / for drums) ◎ Explosion-proof design that does not use electricity ◎ Compatible with high-viscosity liquids ◎ Usable without sealing the drum ◎ Powerful discharge "Benefits" ● Efficient transfer of high-viscosity liquids ● Safe transfer of flammable liquids ● Ideal for horizontal and high-lift transfer ● Can be used as a circulation pump due to continuous operation capability "Features" ● Dedicated to JIS standard 200L closed drums (large plug G2) ● High lifting capacity ● Diaphragm pump (with pulsation)

• Other pumps

◎Explosion-proof design that does not use electricity ◎Compatible with high-viscosity liquids ◎Can be used without sealing the drum ◎Powerful discharge 《Benefits》 ●Efficient transfer of high-viscosity liquids ●Safe transfer of flammable liquids ●Ideal for horizontal and high-lift transfer ●Can be used as a circulation pump due to continuous operation capability 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●High lifting capacity ●Diaphragm pump (with pulsation)

• Other pumps

**CHD Series** CHD-20AHP (For solvents) CHD-20AHPV (For solvents / with ball valve) CHD-20AHPN (For solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for peace of mind and safety ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● No risk of electric leakage due to air operation ● Air motor type with high discharge volume and no pulsation ● Discharge only **Replacement of Motor Head** The head part (motor part) is easy to detach and attach, allowing for replacement of the air motor type with an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement.

• Other pumps

**CHD Series** CHD-20APP (for solvents) CHD-20APPV (for solvents / with ball valve) CHD-20APPN (for solvents / with gun nozzle) **Benefits** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety Electrical Appliance and Material) for safety and security ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Air-operated, so no risk of electric leakage ● Air motor type with high discharge volume, no pulsation ● Discharge only **Replacement of Motor Head** The head part (motor part) is easy to detach and attach, allowing for replacement of the air motor type with an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement.

• Other pumps

"JIS Standard 200L Drum, Resin Drum, IBC Container (Tank) Compatible Laser Liquid Level Gauge Standard/Wireless/Parent Unit/Repeater (GDE-CL/GDE-CLW/GDE-W/GDE-R)" GDE-CL / Standard Type, No Wireless, Battery Operated GDE-CLW / Wireless Type, AC100V GDE-W / Wireless Type Dedicated Parent Unit, AC100V GDE-R / Wireless Type Dedicated Repeater, AC100V (Oil, Kerosene, Diesel) *Solvents and chemicals are not compatible due to laser sensing considerations "Features" ● Measurement in various containers such as drums (display in %, L, mm) Can also be used for other containers if the maximum liquid height is set (display in % and mm / L display not available) * % indicates the remaining liquid ratio from the total, L (liters) indicates the remaining liquid volume, mm indicates the remaining height from the bottom layer relative to the total liquid * Small plug (G3/4) can be attached to the drum ● Select units from "%, L, mm" and display on the LCD panel (JIS Standard 200L Drum) ● Set the height at which a sound will be emitted during "%" measurement ● Sends liquid volume data to the USB-connected parent unit every 30 seconds ● Can manage up to 15 units in real-time within a dedicated PC application ※Please note that this is available for sale in Japan only.

• Liquid level control/level switch

"Sensor-type Liquid Level Gauge for 200L Drum" GDA-HH / For Full (Oil, Kerosene, Diesel, Solvent) *Not suitable for corrosive substances like chemicals GDA-HL / For Empty (Oil, Kerosene, Diesel, Solvent) *Not suitable for corrosive substances like chemicals "Benefits" ● You can check whether the liquid inside the drum is full or empty without tilting or peering into the drum. ● You can confirm when the drum is full or empty during liquid transfer. ● The sensor can be adjusted according to the desired liquid level line using a position adjustment adapter. ● Lightweight and affordable. ● Enables management of liquids inside the drum. ● Suitable liquids include low-viscosity oil, kerosene, diesel, and solvents. *Not suitable for corrosive substances like chemicals. "Features" ● Specifically designed for JIS standard 200L drums. *Can be attached to the small plug (G3/4) of the drum. ● Since it is air-driven, the liquid level gauge can be used in areas where open flames are prohibited. ● Can be used in combination with air-driven handheld pumps (ACH, AMVH, AMH1 series). ● After the pump stops, only GDA-HL can discharge additionally. The pump operates while pulling the dispensing ring. ● This product is for indoor use only. *Do not use outdoors.

• Liquid level control/level switch

"AQplus Hybrid Fan" AQR-180HB Series This new product differs from conventional fans in that it allows for two methods of power supply. 1. Connect the included AC100V power cord to draw power from an outlet. 2. Connect a rechargeable DC18V dedicated battery for cordless power supply. It is a hybrid fan that can adapt to various applications and environments. <Features> ● Lightweight and compact yet powerful airflow for cooling, with a rechargeable dedicated battery for long usage times. ● Weighs approximately 7.5 kg, with dimensions of about W62×D32×H62 cm. ● Airflow can be adjusted in three levels: [High, Medium, Low]. ● The dedicated battery is a lithium-ion battery DC18V-6000mAh. ● Continuous operating time when using the dedicated battery is approximately 3 hours on [High], 4 hours on [Medium], and 9 hours on [Low]. ● The charger plugs into a single-phase AC100V (50/60Hz) outlet and can fully charge in about 1 hour.

• others

"Fan Series" AFR-18NL ◎ Equipped with oil-free air motor ◎ Angle adjustable "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas as it is powered by air ● Various models and sizes to choose from based on the usage location ● Stepless adjustment of rotation speed using air valve throttling ● No oil required, no lubricator needed ● Noise reduction of approximately 5% * Compared to our conventional products "Features" ● Equipped with oil-free air motor ● Stable construction that is difficult to tip over ● Angle adjustable "Applications" ● Heatstroke prevention ● Infection control measures such as for COVID-19 ● Efficiency improvement for drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 5-40 degrees (°C)) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• air conditioning

"Battery-Powered Vacuum Cleaner Eco Sweeper" AJL780E <Advantages> ● Hand-pushed with power assist from an electric battery that rotates the brush ● Cordless electric battery operation allows use on roads and in parks ● Easy to operate by simply pushing and walking, requiring little effort ● Comes with a collection bucket, allowing disposal without dirtying hands ● Rotating brushes on both sides collect dust, dirt, sand, fallen leaves, glass shards, bolts, paper scraps, etc. <Features> ● Collects debris just by pushing (operating time: 2.5 hours) ● Powered by a lithium battery (charging time: 6 hours) ● Comes standard with two side brushes ● Dust box is easily removable with one touch ● Height adjustment feature with 8 levels to accommodate the size of collected debris ● No backflow of debris with side brushes ● Can be leaned against and stored compactly

• Industrial Vacuum Cleaners

"Sensor-type Liquid Level Gauge for 200L Drums" GDB-CF / For Full GDB-CL / For Empty (For low-viscosity oil, kerosene, diesel, wastewater, and waste liquids) *Not suitable for solvents or chemicals that can damage materials. "Benefits" ● You can check whether the liquid inside the drum is full or empty without tilting the drum or peering inside, using each product. ● You can confirm when the drum is full or empty during liquid transfer. ● The sensor can be adjusted according to the desired liquid level line using a position adjustment adapter. ● Lightweight and affordable. ● Enables management of liquids inside the drum. ● Usable liquids include low-viscosity oil, kerosene, diesel, water, wastewater, and waste liquids. *Not suitable for solvents or chemicals that can damage materials. "Features" ● Dedicated to JIS standard 200L drums. *Can be attached to the small plug of the drum (G3/4). ● Confirmation work can be done within 3 minutes from startup (automatic stop after 3 minutes). ● The full and empty indicators light up in red and alert with a 15-second buzzer. ● Uses four AA batteries (approximately 1,000 uses). ● This product is for indoor use only. *Do not use outdoors.

• Other pumps

"Battery-operated sensor auto-stop nozzle air pressure pump" APD-20ATNB (for diesel and kerosene) <Main Description> - Ideal for refueling and dispensing operations of kerosene and diesel. - The nozzle is equipped with a built-in sensor that automatically stops when it detects liquid. - The auto-stop function prevents spills that occur when transferring liquid to a container, helping to eliminate oil stains and odors, thereby contributing to cost reduction and environmental improvement. - Operates on three AA lithium batteries, allowing for approximately 200 uses under normal conditions. *Please pay attention to the operating pressure and flow range.

• nozzle

"Battery-operated sensor auto-stop nozzle air pressure pump" APD-20GATNB (for diesel, kerosene, and medium viscosity oil) <Description of the main unit> - Ideal for refueling and dispensing operations of kerosene, diesel, and medium viscosity oil. - The nozzle is equipped with a built-in sensor that automatically stops when it detects liquid. - The auto-stop function prevents spills that occur when transferring liquid to a container, contributing to cost reduction and environmental improvement by eliminating oil stains and odors. - Operates on three AA lithium batteries, allowing for approximately 200 uses under normal conditions. *Please pay attention to the operating pressure and flow range.

• nozzle

A mobile cart and station trolley suitable for transporting drum cans. With large vehicle wheels, moving drum cans becomes easy, and it can be safely transported with a fall prevention lock. 《A total of five sets to choose from based on the site and application!》 《1. Kerosene and light oil set》 ● APD-20GATNB air drum pump (with sensor auto-stop) ● Air tank (sold separately) ● Station trolley 《2. Kerosene and light oil set》 ● APD-20GATNK24 air drum pump (with measuring auto-stop) ● Air tank (sold separately) ● Station trolley 《3. Oil set》 ● K33APD-20 air drum pump (with flow meter) ● Air tank (sold separately) ● Station trolley 《4. Mobile battery set》 ● TDP1-M33 electric kerosene and light oil drum pump ● Portable power supply (sold separately) ● Station trolley 《5. AdBlue lithium set》 ● Ad-1LATNPK24 rechargeable drum pump (with measuring auto-stop) ● Station trolley

• Other pumps

Do you have any of these concerns regarding the transfer and management of kerosene and light oil? 1. Transferring from drums is difficult. 2. Spillage when decanting from jerry cans. 3. Difficulty in reducing costs due to soaring crude oil prices. The high-performance "TDP1 series," equipped with a flow meter and an auto-stop gun nozzle, solves these problems. It automatically stops when it touches the liquid level, preventing spillage! Furthermore, the flow meter allows for accurate monitoring of usage, enabling efficient operations with minimized waste. < Model lineup (for kerosene and light oil) > - TDP1K24-ATN: Includes flow meter (on the main unit) - TDP1-ATNK24: Includes flow meter (on the nozzle) - TDP1M33-ATN: Includes mechanical flow meter (on the main unit) - TDP1-ATN: No flow meter < Technical specifications (excerpt) > - Usable container: 200L drum (JIS standard compliant) - Maximum discharge rate: 20L/min (for low-viscosity liquids) - Usable liquids: Kerosene and light oil (viscosity below 100cP) - Power supply: AC100V / Continuous operation compatible - Accessories: Auto-stop gun nozzle, oil-resistant hose

• Other pumps

"Battery-Powered Sensor Auto Stop Nozzle Series" ATNB-20 (for light oil, kerosene, and medium viscosity oil) ◎ Adopts a battery-powered auto stop function, allowing for transfer even without a pump body. This nozzle has a built-in sensor that automatically stops in response to liquid. It can be used approximately 200 times with three AA lithium batteries. *Please pay attention to the usage pressure and flow rate range.

• nozzle

Measuring and stopping are standard! Cost reduction through usage management! 《TDP1 Series (for kerosene and light oil)》 TDP1K24-ATN (for kerosene and light oil / with main unit TB-K24-FM) TDP1-ATNK24 (for kerosene and light oil / with nozzle TB-K24-FM) TDP1M33-ATN (for kerosene and light oil / with main unit MK33-25D) TDP1-ATN (for kerosene and light oil) ◎ Integrated flow meter You can choose from three types with flow meters: TDP1K24-ATN, TDP1-ATNK24, and TDP1M33-ATN, depending on your application. There is also a type without a flow meter, allowing for economical use of kerosene drum pumps. ◎ Electric type with auto-stop gun preset for kerosene and light oil Automatically stops discharge when the liquid is full! Prevents overflow. ◎ Improvement in liquid management With a flow meter, you can see the flow rate at a glance, eliminating waste and leading to cost reduction. ◎ Continuous operation possible Can be used anywhere with continuous operation at 100V electric power, improving work efficiency.

• Other pumps

Station Trolley (Mobile Fueling Cart) "Four types of sets to choose from based on the site and application!" "1. Kerosene and Light Oil Set" ● APD-20GATNK24 Air Drum Pump (with automatic stop for measurement) ● Air Tank (sold separately) ● Station Trolley "2. Oil Set" ● K33APD-20 Air Drum Pump (with flow meter) ● Air Tank (sold separately) ● Station Trolley "3. Mobile Battery Set" ● TDP1M33 Electric Kerosene and Light Oil Drum Pump ● Portable Power Supply (sold separately) ● Station Trolley "4. AdBlue Lithium Set" ● Ad-1LATNPK24 Rechargeable Drum Pump (with automatic stop for measurement) ● Station Trolley

• Fats and oils

"Grease Up Series" Grease Up (Grease Supply Device / Grease Lubricator / Grease Injector GRU "Benefits" ● Leads to a reduction in maintenance costs ● Can be directly fixed to the lubrication part for easy oiling ● Reusable by simply replenishing grease ● Compatible with our air motor type factory fans (some other brands may also be used) "Features" ● Recommended usage amount allows for lubrication with 2 rotations per use ● Grease content is sufficient for 4 rotations (3.8cc) ● 0.47CC per rotation

• Filling and bottling machines

*When using adhesive, only those that do not damage the material are allowed. For details, please contact us.* APP-C1-AL (for oil) APP-C1-SUS (for solvents) ◎ The discharge pipe has a large diameter to accommodate high-viscosity oils and solvents ◎ Grease up to #3 consistency can be discharged ◎ The suction pipe has been modified in two places for efficient discharge when switching between closed cans, etc. ◎ Can be shared between different diameter cans such as pails and one-gallon cans *Benefits* ■ Capable of discharging high-viscosity liquids (below 10,000 cP) ■ The spring mechanism allows the pipe to reach the bottom of the can, minimizing residual liquid ■ Can transfer to high places or long distances under high pressure *Features* ■ Sealed pressurized and discharge-only ■ Entirely pressurizes one-gallon cans or pails ■ Continuous operation possible ■ Lifting capacity of 30m ■ Usable with air compressors of 1 horsepower (0.75 kW) or more

• Other pumps

**Merits** - Maximum cooling of minus 8 degrees (−8℃) improves work efficiency in high-temperature and high-humidity environments - Continuous operation possible - Safe to use in explosion-proof areas as the power source is air - High water-saving function allows for usage while conserving water - By adjusting the valve opening, it can operate for about 8 hours on 1 liter **Features** - Dedicated container included as a substitute for the tank - Water supply tank compatible with large 10-liter types and servers - Circulator and oscillation function enable wide-area cooling, ventilation, and air blowing - Mist and airflow adjustment with a needle valve - Two types available, 18 type and 24 type, depending on the "site" or "application"

• Oil Mist Collector

<Are you having any issues working in a no open flames area?> - I want to transport solvents and gasoline while keeping costs down. - I want products that can handle both cleaning inside the factory and liquid recovery. - I can't use electric fans, and it's hot, which decreases the efficiency of the workers. Aqua System's air-driven and manual products pursue energy savings and solve these concerns! <Main target products> APD-20 (AS/ASATN/ASN) APD-20G APD-25 APD-25 (AS/ASATNASN) APD-25G CHD1-20A (SUS/SUSN/SUSV) CHD-20APP (N/V) CHD-20AHP (N/V) HRD-25SUS (H/HM) APPQO600 (S/SET) APPQO400 APPQO400AS APPQO400G APPQO400S APDQ1-25 APDQ1-25AS APDQ1-25G AFG-18NL AFK-18NL AFD-18NL AFF-18NL

• Other pumps

"Pursuing Reasonable Prices! The Long-Awaited Flow Meter Integrated Electric Drum Pump" <Flow Meter Integrated - Can be installed and used immediately after delivery without the need for customer assembly> You can choose from three types with flow meters according to your application and site: standard meter type (TDP-M), handheld meter type (TDP-MN), and large meter type (TDP-M33). There is also a type without a flow meter (TDP). <Improvement of Liquid Management> With the flow meter, waste of liquid is eliminated, leading to cost reduction. [Usage Example] Cost improvement of fuel usage by department or equipment. <Continuous Operation Possible> It can operate continuously with 100V electric power, allowing you to use it anywhere by simply plugging it into an outlet.

• Other pumps

《Manual Gun Nozzle Series》 GN1-POM20 / GN1-POM25 (for AdBlue) Compatible with water, water-soluble liquids (neutral), kerosene, and diesel. 《Benefits》 A manual gun nozzle featuring a lightweight and compact universal design. Its simple structure and maximum durability make it resistant to failure. Based on customer feedback, it has been thoroughly refined to be the optimal specification for transferring AdBlue. 《Features》 ● Significantly improved durability ● Easy-to-handle stylish straight grip ● Shape that minimizes interference with water tanks

• nozzle

*Not all liquids are compatible with all products. - Kerosene - Diesel - Gasoline - Spindle oil - Refrigeration oil - Engine oil - Turbine oil - Hydraulic oil - Oil - Machine oil - Gear oil - Lubricating oil - Cylinder oil

• Other pumps

The chemical manufacturer K is looking for a solvent hand pump that can be transported to the second floor of their factory. Since the factory itself cannot use electricity, they were using an explosion-proof pump, which was expensive and required frequent maintenance, leading to high costs. Therefore, they introduced the "Air-operated Hand Pump." It can be used safely within the factory and is easy to carry. They also use a drum connection pipe as an option, allowing them to switch according to the task. [Solutions] ■ AMH1-20SUS High viscosity hand vane pump (for viscosities below 2,000 cP) ■ AMVH-20SUS Medium viscosity hand vane pump (for viscosities below 1,500 cP) ■ ACH-20SUS Low viscosity hand centrifugal pump (for viscosities below 5 cP) *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The raw material manufacturing company T has never cleaned in-house and has been outsourcing waste liquid collection and machine cleaning, incurring outsourcing costs. Additionally, there was a company-wide initiative for cost reduction. At that time, they encountered the "Air Vacuum Cleaner" and tested a demo unit. It had stronger suction power than electric vacuum cleaners and could be thoroughly washed after use, leading to their decision to purchase it. "We are now able to reduce outsourcing costs, and a cleaning awareness has developed within the company, making it truly invaluable," they shared. 【Solution】 ■ APPQO400AS: Open drum can / during collection ■ APPQOAS: Open drum can / during collection ■ APPQAS: Closed drum can / during collection *Please note that the QR code in the image may not be fully readable. We appreciate your understanding. Detailed information is available on this site, so please search by model number or contact us. *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

The petrochemical manufacturer S was struggling with the collection of waste liquid after use and was using an electric industrial vacuum cleaner, but it frequently broke down, leading to high costs. Due to the large volume of collection, they introduced the "Air Vacuum Pump for Drum Cans." Additionally, by using the "Separate Type," which allows for disassembly and cleaning, they were able to easily clean after waste liquid collection and maintain cleanliness. 【Solution】 ■ APDQS-25SUS Separate Type - Suitable for collecting large amounts of liquid - Can be disassembled for cleaning thanks to the helical joint ■ APDQ1-25AS - Easy collection from closed drum cans - Maximum collection rate of 80L/min ■ APDX1-25AS - Capable of collection and discharge (portioning) with one unit - Maximum collection rate of 80L/min, maximum discharge rate of 100L/min *Please note that some QR codes in the images may not be readable. We appreciate your understanding. Detailed information is available on this site, so please search by model number or contact us. *For more information, please refer to the PDF materials or feel free to contact us.

• Other pumps

Company M, a plant factory, was lifting one-gallon cans for work, and the lifting operation (approximately 20 kg) was causing back injuries, necessitating improvements. By using a cock, they eliminated the need to lift or spill onto the floor, resulting in improvements for both the environment and the workers. Additionally, in areas where cans cannot be laid on their side, a manual pump was used, achieving similar improvements. 【Solution】 ■ P-SX/SXT Manual Pail Pump - Allows for portioning in locations without power (200cc/st) ■ Electric Compact Industrial Pump - For portioning cleaning solutions and soapy water from containers like poly tanks *Please note that the QR code in the image may not be fully readable. We appreciate your understanding. Detailed information is available on this site, so please search by model number or contact us. *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps