ファスト Product Lineup

This is a compact reactive hot melt applicator that achieves simple and easy operability at a low cost. The discharge volume can be adjusted using a variable gear pump. 【Features】 - The gear pump is equipped with a maximum pumping capacity of 5 kg/hour and a pressure relief valve to smoothly deliver the resin. The adjustment of the relief valve can be easily done from outside the device. ○ Temperature control is possible from 40°C to 200°C (±0.5%). ○ Tank with a sealed lid The high airtight sealed lid maintains a moisture-free state. ○ External electrical input The B4 gear pump allows for external electrical input for the pump and motor from the main unit, in addition to a motor start/stop switch. ● For other functions and details, please download the catalog.

■ Keep the inside of the tank free from moisture to prevent early reactions of the adhesive. ■ Melt only the necessary amount of adhesive. ■ Introduce PUR blocks without stopping the equipment. ■ An applicator that incorporates the advantages of both drum and tank types.

In conventional applicators, it was necessary to first melt the reactive hot melt and purge dry air or nitrogen in the tank. Additionally, drum and pail melters had downtime during can changes. However, the "B4 Non-Stop" applicator does not require dry air or nitrogen purging, and there is no waiting time for can replacements. It is a "non-stop" type that ensures continuous discharge.

The B4 Nonstop is an applicator that melts and dispenses only the necessary amount of moisture-reactive PUR hot melt, which is packaged in aluminum foil, from the bottom gradually. No need for dry air supply or nitrogen purging into the tank! No downtime during replacement like with drum or pail can melters! The cooling fan suppresses the temperature rise in the non-melted parts of the hot melt. 【Features】 ■ Only the aluminum foil packaging on the bottom is cut, making it difficult for the unused part to come into contact with outside air. ■ The cooling fan suppresses temperature rise, reducing thermal damage to the unused part. ■ The diameter of the aluminum foil packaging that can be installed is up to 130mm. ■ Temperature control is supported from 40 to 200°C. ■ The speed of the motor/pump can be controlled manually or automatically. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Energy-saving design significantly reduces electricity costs! Reactive adhesive gear pump applicator ■ Efficiency of melting By ensuring a uniform temperature distribution across the entire tank surface, the adhesive is melted efficiently without creating overheating spots that can degrade the adhesive. ■ Adhesive storage The applicator's sealed lid and dry air system maintain the performance of the adhesive. ■ Pump discharge By making the adhesive flow path straight and wide, the load on the pump is reduced. ■ High maintainability Open the electrical door to access the electrical control system, slide the electrical panel to reach the motor and pump, and open the side of the unit to access the pump purge and filter... You can easily access each part inside the unit! 〇 For detailed specifications, please download the catalog.

This is a compact reactive hot melt applicator that achieves simple and easy operability at a low cost. The discharge volume can be adjusted using a variable gear pump. 【Features】 - The gear pump has a maximum pumping capacity of 5 kg/h and is equipped with a pressure relief valve to smoothly deliver adhesive resin. - The high airtight sealed lid maintains a moisture-free condition. - External electrical input allows for external electrical input for the pump and motor from the master unit, in addition to the motor start/stop switch. ● For other functions and details, please refer to the catalog.