ART Finex Co.,Ltd. Product Lineup

At Art Finex Co., Ltd., we are conducting the "HXP Series Evaluation Kit Introduction Promotion Campaign" aimed at customers considering the introduction of the HXP series. In this campaign, we will offer evaluation kits, which serve as an entry point for considering product adoption, at a special limited-time price. We encourage you to take advantage of this opportunity to evaluate and verify the HXP series. 【Overview】 ■ Campaign Period: Orders from August 1, 2026, to December 31, 2026 ■ Target Products - HXP200 Series Evaluation Kits for Each Module Size - HXP100 Series Evaluation Kits for Each Module Size - HXS200 Series Evaluation Kits for Each Antenna Size * The provision of HXP100 Series and HXS200 Series is scheduled to start around September. * For more details, please refer to the related links or feel free to contact us.

• RFID related products and IC tag services

The "HXP200 pico" is a multi-protocol ultra-compact mid-power antenna-integrated RFID reader/writer. It features our smallest class ultra-compact "pico" size (18mm x 18mm) antenna-integrated module, allowing for flexible installation locations. In addition to the LPCD (Low Power Consumption Proximity Card Detection) function, it achieves low power consumption through polling functionality with full power intermittent operation. 【Features】 ■ Ensures practical communication distance with mid-class RF power ■ Supports MAC authentication function of FeliCa Lite-S ■ Connects to the user-side upper board with a board connector that does not require a harness, operating at a low voltage of DC3.3V ■ Allows control of RF power increase and decrease via user commands ■ Standardly implements GPIO ports, enabling control of LEDs and other devices *For more details, please download the PDF or feel free to contact us.

• RFID related products and IC tag services

The "HXP200/4058" is a compact, mid-power, multi-protocol integrated antenna RFID reader/writer. It ensures excellent communication distance with mid-class RF power. The board size is 40mm x 58mm with an integrated antenna. In addition to supporting all NFC ICs (NFC-F, -A, -B, -V), it also complies with ISO18000-3 mode 3. 【Features】 - Power-saving functions such as LPCD (Low Power Card Detection) - Supports MAC authentication for FeliCa Lite-S - ISO15693 and ISO18000-3 mode 3 support collision control (anti-collision) - IIC digital chain connection is possible (optional) - Equipped with GPIO ports for controlling LEDs and other devices - High-frequency design compliant with overseas radio laws (separate certification required) *For more details, please download the PDF or feel free to contact us.

• RFID related products and IC tag services

The "HXP200/3445C/USB" is a multi-protocol compatible USB reader/writer. It supports ISO15693, FeliCa, ISO14443 Type A/B, MIFARE Classic, and more. The connection method is USB, allowing for easy connection to PCs and other devices. There is an HID version that operates autonomously, which can be used without a control program through keyboard emulation. The HID-compatible version also supports switching to upper control operation mode, allowing for upper control via a virtual COM port connection. 【Features】 ■ Built-in medium output multi-protocol reader/writer HXP200/3445, providing practical communication distance. ■ Supported OS includes Windows 10/11; other OS can be discussed. ■ A model with a flange for easy installation and fixation is also available. *For more details, please download the PDF or feel free to contact us.

• RFID related products and IC tag services

The "HXP200/3445C/HID" is a multi-protocol RFID reader/writer compatible with HID. RF tags are compatible with ISO15693, FeliCa, and ISO14443. (*Note: It does not support reading the security area of FeliCa.) It comes standard with a keyboard emulation function for autonomous operation, allowing use without programming. It is recognized as an HID device from the host side and operates on USB bus power. 【Features】 ■ Equipped with the multi-protocol compatible RFID reader/writer "HXP200/3445" ■ RF tags are compatible with ISO15693, FeliCa, and ISO14443 ■ Standard implementation of keyboard emulation function for autonomous operation ■ Compatible OS is Windows 10 and later; other OS can be discussed ■ Virtual COM port connection is possible with mode switching, allowing command control from host applications *For more details, please download the PDF or feel free to contact us.

• RFID related products and IC tag services

The "HXP200/3445" is a compact, mid-power, multi-protocol integrated antenna RFID reader/writer. It ensures excellent communication distance with mid-class RF power. The board size is 34mm x 45mm with an integrated antenna. It features low power consumption functions such as LPCD (Low Power Card Detection) and supports MAC authentication for FeliCa Lite-S. 【Features】 ■ Supports collision control (anti-collision) for ISO15693 and ISO18000-3 mode 3 ■ Allows daisy chain connection via IIC (optional) ■ Equipped with GPIO ports for controlling LEDs and other devices ■ High-frequency design compliant with overseas radio laws (separate certification required) ■ Compatible with all NFC ICs (NFC-F, -A, -B, -V) and also supports ISO18000-3 mode 3 *For more details, please download the PDF or feel free to contact us.

• RFID related products and IC tag services

The "HXP200/2535" is a compact, mid-power, antenna-integrated RFID reader/writer that supports multiple protocols. It ensures practical communication distances with mid-class RF power. It is a small module measuring 25mm x 35mm with an integrated antenna. In addition to supporting all NFC ICs (NFC-F, -A, -B, -V), it also complies with ISO18000-3 mode3. 【Features】 - Power-saving functions such as LPCD (Low Power Card Detection) - Supports MAC authentication for FeliCa Lite-S - ISO15693 and ISO18000-3 mode3 support collision control (anti-collision) - Daisy chain connection via IIC is possible (optional) - Equipped with GPIO ports for controlling LEDs and other devices - High-frequency design compliant with overseas radio laws (additional certification required) *For more details, please download the PDF or feel free to contact us.

• RFID related products and IC tag services

The "HXP200/1735" is a compact, multi-protocol, mid-power antenna-integrated RFID reader/writer. It ensures practical communication distances with mid-class RF power. It is a small module measuring 17mm x 35mm with an integrated antenna. In addition to supporting all NFC ICs (NFC-F, -A, -B, -V), it also complies with ISO18000-3 mode 3. 【Features】 - Power-saving functions such as LPCD (Low Power Card Detection) - Supports MAC authentication for FeliCa Lite-S - ISO15693 and ISO18000-3 mode 3 support collision control (anti-collision) - Digital chain connection via IIC is possible (optional) - Equipped with GPIO ports for controlling LEDs and other devices - High-frequency design compliant with overseas radio laws (additional certification required) *For more details, please download the PDF or feel free to contact us.

• RFID related products and IC tag services

The "HXP200/72" is a compact, multi-protocol, mid-power antenna-integrated RFID reader/writer. It has a square size of 72mm x 72mm. With mid-class RF power, it ensures excellent communication range. Additionally, it supports all NFC ICs (NFC-F, -A, -B, -V) and is compliant with ISO18000-3 mode 3. 【Features】 - Power-saving functions such as LPCD (Low Power Card Detection) - Supports MAC authentication for FeliCa Lite-S - ISO15693 and ISO18000-3 mode 3 support collision control (anti-collision) - Capable of daisy chain connection via IIC (optional) - Equipped with GPIO ports for controlling LEDs and other devices - High-frequency design compliant with overseas radio wave regulations *For more details, please download the PDF or feel free to contact us.

• RFID related products and IC tag services

The "HXP100 series" is an antenna-integrated RFID reader-writer module with a rich lineup of sizes. It supports all NFC ICs (NFC-F, -A, -B, -V) and operates with low voltage at a DC 3.3V power supply. *Note that the HXP100/1827 operates at DC 5V. This product comes with an "evaluation kit" that can be used immediately with a Windows PC. You can choose between USB and RS-232C for the connection interface with the PC. 【Features】 ■ NEX100/2535 supports board-to-board connectors ■ Compatible with FeliCa Lite-S MAC authentication function ■ Achieves low power consumption through intermittent polling function ■ Daisy chain connection via IIC is possible (optional) ■ Equipped with GPIO ports for controlling LEDs and other devices *For more details, please download the PDF or feel free to contact us.

• RFID related products and IC tag services

"SECURART/U" is an access control system compatible with UHF RFID. There is no need to hold an IC card up to a reader, allowing for natural authentication while passing through. It contributes to comfortable access management in general offices, as well as in factories, warehouses, and backyards, where carts are moved and both hands may be occupied, thereby improving work efficiency and productivity. Additionally, it can be integrated with your attendance and HR systems, enabling operations that utilize employee information and access history data. 【Features】 ■ Compatible with UHF RFID ■ Keeps implementation costs low and enables speedy operational start ■ Streamlines management tasks through integration with attendance systems ■ Flexibly and rigorously manages according to diverse work styles ■ Electric locks can be selected according to the structure of various doors *For more details, please download the PDF or feel free to contact us.

• RFID related products and IC tag services
• Entrance and exit control system

The "HXP100/1827" is a compact RFID module with an integrated antenna. It features FeliCa's MAC authentication function. Additionally, it is equipped with GPIO ports, allowing for control of external devices such as LEDs (optional). Daisy chain connections via IIC are also possible (optional). We also offer an "evaluation kit" that you can try out immediately. The evaluation kit can be connected to higher-level systems via USB or RS-232C. 【Features】 ■ Compact module with an integrated antenna measuring 18×27mm ■ Low voltage operation at DC5.0V, connects to higher-level systems via UART (standard) or IIC (optional) ■ Multi-protocol support for ISO15693, FeliCa, ISO14443 Type-A/Type-B ■ Equipped with FeliCa's MAC authentication function ■ Daisy chain connection via IIC is possible (optional) *For more details, please download the PDF or feel free to contact us.

• RFID/IC tags
• RFID related products and IC tag services

Our company is engaged in product development utilizing RFID tags. This time, we would like to introduce development examples of the "RFID Place Board" and "Place Shelf" from our "Place Series." 【Place Board】 An RFID board that allows for easy collection of work performance data on the manufacturing site simply by placing RFID tags on the board. No complicated input is required, enabling visualization of the manufacturing site! ◎Features ■ No operational burden on site personnel as it only requires placing RFID tags ■ Collected data can be analyzed from various perspectives such as kanban and processes 【Place Shelf】 A smart shelf management system that can detect and record the in-and-out movements of items with attached RFID tags in real-time. By simply installing our unique RFID reader-writer module compatible with DigiChain connections on the shelf, immediate operation can begin. ◎Features ■ Real-time detection of the actions of "placing" and "taking" on the shelf ■ Immediate inquiry of the presence and location of items from a higher-level system Additionally, we are broadly responding to requests for product development utilizing RFID. Please contact us through "Contact Us from the web" or view product details from "Download Catalog."

• RFID related products and IC tag services
• RFID/IC tags

The HXP200/3445 is an embedded RFID reader/writer module with an integrated antenna. Despite its compact size of 34×45mm, it offers practical communication performance with mid-class RF power. By connecting the "evaluation kit," which includes the reader/writer unit and the interface board, to a PC, you can immediately start evaluating the RFID module. (USB version / RS-232C (D-Sub 9pin version) are available) 【Features】 ■ Supports five communication standards: ISO/IEC15693, FeliCa, ISO/IEC14443 Type A/Type B, and ISO/IEC18000-3 mode 3 ■ ISO/IEC15693 and ISO/IEC18000-3 mode 3 support collision control (anti-collision) ■ Compatible with the MAC authentication function of FeliCa Lite-S ■ Allows daisy chain connection via I2C ■ Equipped with GPIO ports for controlling LEDs and other devices ■ High-frequency design compliant with overseas radio laws (Note: Certification in each country requires separate application) *For more details, please refer to the catalog PDF or contact us directly.

• IC tag

We would like to introduce our "Access Control Management and Electric Lock Control using RFID." With the ASI4000net/LEX, which has a built-in clock and flash memory, a secure access management system linked to the upper system can be established. As for the electric locks that can be connected, you can use types like MIWA's AUT, AUTA, AUR, AURA, or AMS, which lock and unlock each time power is supplied, as well as motor locks and automatic doors. 【Control Examples with Upper System】 ■ Access Restriction Function ■ Expiration Authentication Function ■ Access Records ■ Card Information Registration, etc. *For more details, please download the PDF or feel free to contact us.

• IC tag

We would like to introduce our "Free Address Management using Wireless Readers." In a free address system in the office, employees touch their IC employee ID cards to an RFID reader equipped with Sub GHz band wireless technology when they sit down or leave. Due to the simple operation, all employees can adopt the system, and the usage status of addresses can be accurately monitored. 【Overview】 ■Challenges - Tracking locations by placing individual magnets on a whiteboard - Inability to maintain and establish operations ■Benefits - The simple operation allows all employees to adopt the system - Accurate monitoring of address usage status *For more details, please download the PDF or feel free to contact us.

• IC tag

We would like to introduce the stamp rally using the "wristband tag" that we handle. Participants will receive a wristband with a built-in tag at the nearest checkpoint. Tablets with wide-area communication capabilities and USB-connected readers will be installed at the checkpoints. When the wristband tag information is scanned, it will be sent to the headquarters, and the passage history will be recorded on the wristband tag. At each checkpoint, participants can also check their own passage history by scanning their wristbands. 【Example of collected data】 ■ Survey of participants' destinations by category ■ Duration of stay near each point ■ Identification of particularly popular spots ■ Collection of participants' opinions ■ Understanding of participants' movement patterns ■ Identification of individuals who have not returned *For more details, please download the PDF or feel free to contact us.

• IC tag

We would like to introduce our "High-Speed Mobile Tag Reading Reader (Prototype Research)" that we handle. It is suitable for concerns such as wanting to accurately and reliably know the location of your vehicle. It enables reliable and high-precision operation (safety) management by accurately reading RFID tags moving at a speed of 130 km/h at a low cost. 【Prototype Research】 ■ Quickly detect tags ■ Shorten tag communication time ■ Expand tag communication area *For more details, please download the PDF or feel free to contact us.

• IC tag

The "Gate Entry and Exit Management System" is a system that collects the records of workers entering and exiting, and logs the passage time information to RF tags and PCs. The passage records received from the RFID unit are managed as a database within the PC, allowing for search display and output to external files in CSV format. The RFID unit consists of an antenna section for exchanging information with IC tags and a controller for storing the data to be read and written. 【Features】 - Collects entry/exit records and logs passage time information to RF tags and PCs - Manages passage records as a database within the PC - Allows for search display and output to external files in CSV format - Designed with considerations for dustproofing, drip-proofing, and heat resistance *For more details, please download the PDF or feel free to contact us.

• IC tag

We would like to introduce "Display Item Location Management & Staff Support" in individual management. We detect and manage what is displayed on the display fixtures using IC tags. When a certain amount of time has passed after a displayed item has been picked up, status information is sent to the staff's smartphones via WiFi. Staff can grasp the product information that customers have picked up in real-time on their smartphones and can make accurate approaches to customers who show interest in the products. 【Display Item Information for Smartphones】 ■ Manufacturer ■ Category ■ Usage ■ Features ■ Price, etc. *For more details, please download the PDF or feel free to contact us.

• IC tag

I would like to introduce the management of potent drugs and important items in medical and research settings. By installing potent drugs and important items that require careful handling in cabinets or safes equipped with RFID, we can manage the history of access. Additionally, by linking with the PC-side system, traceability can be ensured. It is also possible to prevent unauthorized access. 【System Functions】 ■ Lock management of the management box ■ Tracking the location and position information of individual items (drug bottles) ■ Management of access to individual items and recording of history *For more details, please download the PDF or feel free to contact us.

• IC tag

Introducing "Management of Important Documents Using RFID." Real-time management of the location of documents on the shelves. Additionally, by appropriately guiding users to the location of the required documents with LEDs, we prevent document mix-ups. The main unit of the device supports LAN connectivity, offering excellent installation and expandability. 【Features】 ■ Up to 32 RW can be connected via a single harness ■ Guides the location of documents with LEDs ■ Detects and identifies tags on document folders ■ Main unit supports LAN connectivity *For more details, please download the PDF or feel free to contact us.

• IC tag

This is an introduction to "Destination Control of Conveyor Lines Using RFID" in engineering management. RF tags are attached to the sides of resin containers. The RF tags are pre-encoded with the container's "destination information." The RF tags of the containers flowing on the conveyor transport line are read by an RFID antenna. The destination information (5 bits) from the read RFID tag data is directly notified to the PLC controlling the transport line via DO. The PLC uses the received destination information to switch and control the direction of the conveyor. Since the microcontroller in the RFID reader/writer autonomously makes judgments and processes information, a controller for destination determination is not required. This device is installed at each branching point to determine the destination. [Made-to-order products] ■ HF band long-range RFID reader/writer ■ Dedicated flat antenna *For more details, please download the PDF or feel free to contact us.

• IC tag

I would like to introduce "Visualizing Process Progress with RF Tags" in engineering management. Real-time tracking of worker progress in cell production using RFID tags. Additionally, if a problem occurs during work, a system has been implemented to promptly notify the manager. Without any key operations, it is possible to accurately grasp who is doing what, where, and under which instruction. 【Features】 ■ Access each reader/writer from a higher-level PC to read RF cards, refer to the card's recorded content, and write data to the database. ■ ASINET continuously monitors the emergency notification button. ■ When the button is pressed, it detects the action, connects to the higher-level system, and notifies which button was pressed. *For more details, please download the PDF or feel free to contact us.

• IC tag

I would like to introduce "Visualizing Process Progress with RF Tags" in engineering management. Using RFID kanban, we can easily and reliably visualize the process by checking which JOB (lot) is in which process, whether the progress of that JOB is on track, and what the schedule for our own process looks like. You can grasp and share the process status on a large LCD monitor. 【Examples of Confirmation Items】 ■ Which process has which JOB (lot)? ■ Is the progress of that JOB on track? ■ What is the schedule for our own process? ■ What is causing the delay? ■ How is the passing process for this JOB? *For more details, please download the PDF or feel free to contact us.

• IC tag

I would like to introduce "Work Performance Collection with ASI4000net in Project Management." With the LAN-connected ASI4000Net and work cards embedded with RFID tags, work performance can be easily collected in real-time. No key operations are required; simply hold or insert the IC card holder for easy operation, allowing for quick input of performance data. 【Basic Work Cards】 ■ In Progress ■ Setup ■ Break ■ Defect Occurrence *For more details, please download the PDF or feel free to contact us.

• IC tag

I would like to introduce the "system for preventing incorrect input of raw materials" in project management. It is a system where the entrance number is recorded on an IC card, and only the entrance that matches the number can be opened. An IC card that has been used once cannot be reused. This prevents the incorrect input of raw materials. 【Flow】 ■1. Prior to operation, register the device number and entrance number with the RFID authentication unit. ■2. Set the numbers that can be input on the IC card using a computer, etc. ■3. When the IC card is presented to the authentication unit, a related check is performed, and if it is OK, the lock is released. *For more details, please download the PDF or feel free to contact us.

• IC tag

I would like to introduce the "recording of manufacturing information (trace information)" in engineering management. For each individual product, its status is traced from the manufacturing stage to shipping, installation, and inspection using a single tag ID. This information is recorded and stored in a database as production information and maintenance inspection information, and it is utilized as valid quality data in the event of an anomaly. 【Manufacturing Information】 ■ Production information for each individual item ■ Packaging (boxing) information ■ Shipping instruction information ■ Shipping performance information ■ Shipping (receiving) performance ■ Installation and inspection information *For more details, please download the PDF or feel free to contact us.

• IC tag

We are pleased to introduce our new product, the "Multi-Protocol Compact Mid-Power RFID Reader/Writer." Despite being a compact module with an integrated antenna for embedded use, it ensures practical communication distances with mid-class RF power. This product comes with an "evaluation kit" that you can use right away. (The included higher interface board is available in USB and RS-232C (D-Sub 9pin) versions.) 【Features】 ■ Supports five communication standards: ISO/IEC15693, FeliCa, ISO/IEC14443 Type A/Type B, and ISO/IEC18000-3 mode 3 ■ ISO/IEC15693 and ISO/IEC18000-3 mode 3 support collision control (anti-collision) ■ Supports MAC authentication function of FeliCa Lite-S ■ Allows daisy chain connection via I2C (optional) ■ Includes power-saving features such as LPCD (Low Power Consumption Card Detection) ■ Equipped with GPIO ports for controlling LEDs and other devices *For more details, please refer to the catalog PDF or contact us directly.

• IC tag

Our "HID-Compatible Multi-Protocol RFID Reader/Writer" supports the USB HID (Human Interface Device) class. It comes standard with keyboard emulation functionality, allowing it to autonomously read the ID and user memory of IC tags and automatically input this information into connected USB devices. Additionally, it is compatible with various IC tag standards such as ISO/IEC15693, FeliCa, and ISO/IEC14443 Type A. 【Features】 ■ Equipped with a multi-protocol compatible RFID reader/writer that supports multiple IC tag standards ■ An installation kit (installation set) is available separately ■ Customization options are also available *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• IC tag

The "UXA250" is a new model of UHF band 250mW (specific low power) RFID reader/writer. It complies with domestic radio laws in Japan as well as FCC/IC/ETSI, making it suitable for overseas use. We provide an RFID development support kit for functional verification and software development. In addition to the reader/writer unit, we include sample applications, development libraries (APIs), command specifications, and sample source code. The control protocol is backward compatible with existing products (UPx series), so you can continue to use your previous applications as they are.

• IC tag
• IC tag reader/writer

The "RFID Multi-Purpose Board" is a tool that can be utilized for visualizing the site and improving operational efficiency by inserting and removing IC cards or RFID tags from a pocket that houses an RFID antenna. It can automatically record tasks that were previously done by hand or with magnets, such as progress management, attendance tracking, management of curing times, and destination management, allowing for remote monitoring of the situation. 【Usage Examples】 Example 1) Record achievements and progress for each work instruction by moving IC cards in and out of the pocket. Example 2) Understand the placement status of workers by line and expedite preparations. Example 3) Notify when the specified curing time for each work lot has elapsed using a display light. Example 4) Easily and accurately grasp labor hours even when the placement of workers changes for each product. There are various ways to use it depending on creativity. Customization is also available. We can provide suggestions on operational rules and how to utilize the product. *Please refer to the accompanying materials. Feel free to contact us with any inquiries.

• IC tag

The "Okujake Tray" is a solution product that involves attaching an RFID reader-writer antenna to a standard plastic tray for operation. When a clear file with an RFID tag is placed on the tray, it is possible to detect what kind of document (slip) has been placed (or taken). The RFID tag is pre-written with information such as the type of document or slip and the distribution destination. Additionally, by designating meanings such as "Pre-Start Tray" or "Completion Tray" for the tray, it becomes possible to accurately track what documents are in what situation, when, and where, along with precise time information. 【Features】 ■ Can be configured according to the number of trays ■ Demo units available for evaluation ■ When a clear file with an RFID tag is placed on the tray, it is possible to detect what kind of document (slip) has been placed (or taken) ■ It is possible to accurately track which documents are in what situation, when, and where, with precise time information *For more details, please refer to the PDF materials or feel free to contact us.

• IC tag

- Improved implementability with a compact RFID reader/writer module (28☓65mm) - Ensured ample communication distance with mid-class RF power - Ability to choose from six rich sizes of detachable antennas according to application needs, as well as the option for custom antennas based on user requirements - Multi-protocol support for five types including ISO15693, FeliCa, ISO14443 TYPE-A/TYPE-B, and ISO18000-3 mode 3 - Advanced secure card usage possible by attaching a secure computing module to the SAM slot - Access to FeliCa secure areas possible when combined with SONY's RC-S500 - Compatible with NXP MIFARE DESFire EV1, EV2, and EV3 - IO ports can be implemented for expansion, allowing customization with LEDs, buzzers, etc.

• Other electronic parts

This document is a service selection guide for "UHF Band RFID" handled by Artfinex. It includes information on "RFID Utilization Solution Services," as well as "Embedded Support Services," "Rental Services (1 week)," and "Developer Support Kits [DK]." Additionally, it provides a selection/customization requirement confirmation for UHF band RFID devices and a list of UHF band RFID antennas. [Contents] ■ UHF Band RFID Service Selection Guide ■ UHF Band RFID Device Selection/Customization Requirement Confirmation ■ List of UHF Band RFID Antennas *For more details, please refer to the PDF document or feel free to contact us.

• IC tag reader/writer

We will introduce a case study of utilizing UHF band RFID in a Warehouse Management System (WMS). We would be grateful if you could consider the tips for utilizing UHF band RFID in each of the following work items: [Receiving/Inspection] => [Receiving Registration] => [Storage] => [Inventory Management] => [Picking] => [Shipping] => [Packing] => [Dispatch]. *For more details, please refer to the PDF document or feel free to contact us.

• IC tag reader/writer

We would like to introduce examples of utilizing UHF band RFID in asset management, inventory management, and loan management. We would be grateful if you could consider the use of UHF band RFID as hints in each scenario: [Registration of managed items] => [Registration of management locations] => [Inventory (stored items)/Storage management] => [Search] => [Registration of loan/use] => [Inventory (in use)/Use and location confirmation] => [Return] => [Disposal]. *For more details, please refer to the PDF materials or feel free to contact us.

• IC tag reader/writer

We would like to introduce a case study on the use of UHF band RFID in project management and progress information collection. We will support the selection of tags, R/W models and configurations, and the determination of operational methods, recognition requirements, and environmental considerations through our "RFID Utilization On-Site Verification Service." For system verification (PoC), we offer the "System Verification Trial Service," and for considerations regarding system integration, we provide the RFID information collection tool "ICTagCollector." We hope this serves as a helpful hint for utilizing RFID in your project management system. *For more details, please refer to the PDF document or feel free to contact us.

• IC tag reader/writer

We would like to introduce a case study on the use of RFID in labor management and process staffing information collection. We will listen to your needs regarding "confirmation of the purpose of labor information collection," "recognition area/points," and "collection method requests." The considerations for [tag selection], [R/W model and configuration selection], and [determining operational methods, recognition requirements, and environmental compatibility] will be supported by our "RFID Utilization On-Site Verification Service." For system verification (PoC), we offer the "System Verification Trial Service," and for considerations regarding system integration, we provide the RFID information collection tool "ICTagCollector." We hope this serves as a helpful hint for utilizing RFID in your labor management and staffing information systems. *For more details, please refer to the PDF document or feel free to contact us.*

• IC tag reader/writer

This is an example of operating a high-output (1W) UHF band RFID reader/writer using a commercially available mobile battery as a power source. It can be mounted on carts or trolleys and is suitable for applications that require portability, such as inventory checks and picking. The operating time, using a 20,000mAh high-capacity mobile battery and performing multiple tag EPC acquisitions every 10 seconds, was 15 hours. The PDF introduces examples of utilizing UHF band RFID in asset management, including scenarios for battery-operated readers, so please refer to it. 【Features】 ■ Compatible with commercially available mobile batteries ■ Antennas can be connected according to the application ■ Stationary equipment can be used for portable applications *For more details, please refer to the PDF document or feel free to contact us.

• IC tag reader/writer

When adopting USB-connected devices in the system, there are cases where it is difficult to perform "plugging and unplugging of cables," necessitating the implementation of "reset" through other means. In this instance, we will introduce a method to "reset" USB devices from the upper system using the functions of the USB interface IC used in the UHF band RFID reader/writer. Additionally, the PDF document includes details on how to implement the "reset" function, so please refer to it. *For more details, please refer to the PDF document or feel free to contact us.

• IC tag reader/writer

To verify the potential of RFID utilization, we are offering the information collection tool 'ICTagCollector' free of charge, in addition to tag selection and recognition solutions. This is effective for trials using multiple devices. (For verification with a single device, the "IC Tag Writer" [Windows PC application] is effective.) Please give it a try. 【Features】 ■ Free provision of information collection tool ■ Effective for trials using multiple devices *For more details, please refer to the PDF document or feel free to contact us.

• IC tag reader/writer

This is an example of a configuration for portable use with a tablet as the host device. It accesses the IDs (EPC) of 50 card tags arranged on the floor at waist height (1m distance). By providing it in a modular configuration, it can be integrated into the desired form. It can be easily configured as a portable device by connecting to a tablet via USB. It can be used for applications such as inbound/outbound inspection, inventory confirmation, and simple handheld tasks. 【Features】 - Easily configurable as a portable device by connecting to a tablet via USB - Can be integrated into the desired form by providing it in a modular configuration - Core technology: Modular integration technology *For more details, please refer to the PDF document or feel free to contact us.

• IC tag reader/writer

This is an introduction to the European-compatible "UHF Band 920MHz Band RFID Reader/Writer." It can be used with the same usability as devices for the Japanese domestic market. One of its features is that there are fewer concerns regarding the difference in frequency band (860MHz band). It can be used for applications such as proximity, single tag reading, tag encoding, and process kanban recognition. 【Features】 ■ Usable with the same usability as devices for the Japanese domestic market ■ Fewer concerns regarding the difference in frequency band (860MHz band) ■ Core technology ・ Solutions compatible with overseas certifications ・ Customization support *For more details, please refer to the PDF materials or feel free to contact us.

• IC tag reader/writer

This is an introduction to tools for easily utilizing RFID (Individual Identification ID). The keyboard emulation tool "RFID2KB" automatically inputs IDs, while the ID linkage execution tool "TagAction" performs specified actions linked to the ID. These can be used for non-contact automatic identification purposes. In the campaign DK introduced in the PDF materials, we provide trial RFID labels. Please attach an RFID label to something and try out automatic identification. 【Features】 ■ Supports HF band RFID EPC tags (capable of recognizing stacked states) ■ Compatible with ISO15693, 14443A (Mifare), and FeliCa ■ Can be LAN-enabled with a USB device server *For more details, please refer to the PDF materials or feel free to contact us.

• IC tag