三明 List of Products and Services

The structure of Nidec's pressure-resistant explosion-proof motors takes the following into consideration: - A strong structure with increased thickness of parts compared to standard applications. - Dimensions and precision of gaps and depths at fitting parts, joints, and shaft penetration areas according to explosion ratings. - Bolts are designed with a locking structure that cannot be loosened with standard wrenches or pliers, preventing disassembly by anyone other than specialists, as opening the container would result in loss of explosion-proof performance. - The temperature rise on the surface of the container that may come into contact with explosive gases is kept below specified temperatures according to their ignition levels. The structure of Nidec's increased safety explosion-proof motors considers the following: - The temperature rise limit of the winding is kept lower than usual according to the temperature rating. - The creepage distance and insulation space distance are set to larger values than standard. - The bolts on the terminal box cover are designed with a locking structure to prevent disassembly by anyone other than specialists. - The temperature rise in areas that may come into contact with explosive gases is kept below specified temperatures according to their ignition levels. - The allowable restraint time is 7 to 10 seconds. Allowable restraint time: The time until the temperature rise, when the rotor of the motor is restrained and rated voltage at rated frequency is applied to the stator, reaches the temperature rise limit specified according to the motor's heat resistance class and temperature rating. Sanmei is an authorized distributor (trading company) of Nidec Techno Motors.

● Products certified by an explosion-proof type testing agency Products certified by the Ministry of Health, Labour and Welfare designated explosion-proof type testing agency ● Usable in Zone 2 hazardous locations Can be used in areas where the likelihood of generating an explosive atmosphere is low under normal conditions, and if generated, it lasts only for a short time ● Ignition degree G3, explosion grade d3 Acetone, ammonia, acetic acid, carbon monoxide, ethane, toluene, ethyl acetate, methanol, propane, benzene, methane, carbon dioxide, water gas, hydrogen (G1) Ethanol, isopentyl acetate, butane, 1-butanol, acetic anhydride, ethylene, ethylene oxide, acetylene (G2) Gasoline, hexane (G3) The structure of the safety-increased explosion-proof motor considers the following: - The temperature rise limit of the windings is kept lower than usual according to the temperature class - Surface distance, insulation space distance, etc., are larger than general values - Terminal box cover bolts are designed to be lockable to prevent disassembly by non-experts - The temperature rise in parts that may come into contact with explosive gases is kept below the temperature determined according to their ignition degree - Allowable confinement time is 7 to 10 seconds Sangmei Co., Ltd. is an authorized distributor (trading company) of Nidec Techno Motor Corporation.

● Continuous operation over a wide frequency range even in hazardous atmospheres Constant torque: 8.75–1750 min-1 (1:20) ● Series production in combination with Yaskawa Electric inverters Applicable inverter: Varispeed G7 ● Suitable for Class I hazardous locations (Zone 1) Can be used in areas where explosive atmospheres are likely to occur under normal conditions ● Applicable in hazardous atmospheres requiring explosion-proof equipment due to ignition degree G4, explosion grade d2 Acetone, ammonia, acetic acid, carbon monoxide, ethane, toluene, ethyl acetate, methanol, propane, benzene, methane, carbon dioxide: G1 Ethanol, isopentyl acetate, butane, 1-butanol, acetic anhydride, ethylene, ethylene oxide: G2 Gasoline, hexane: G3 Acetaldehyde, ethyl ether: G4 - Strong structure with increased wall thickness compared to standard applications - Clearances and depths at fitting parts, joints, and shaft penetrations are dimensioned and precise according to explosion grades - Temperature rise on container surfaces that may come into contact with explosive gases is kept below specified temperatures according to their ignition degrees Sanmei is an authorized distributor (trading company) of Nidec Techno Motor.

● Continuous operation over a wide frequency range even in hazardous environments Low torque: 1.5–60Hz (1:40) (0.4kW 200V only: 1.8–60Hz (1:30)) Constant torque: 3–60Hz (1:20) ● Series production in combination with Yaskawa Electric inverters Applicable inverters: Varispeed G7, A1000 ● Compatible with Class I hazardous locations (Zone 1) Usable in locations where explosive atmospheres are likely to occur under normal conditions ● Ignition degree G4, applicable in most hazardous atmospheres, explosion grade d2 Acetone, ammonia, acetic acid, carbon monoxide, ethane, toluene, ethyl acetate, methanol, propane, benzene, methane, carbon dioxide: G1 Ethanol, isopentyl acetate, butane, 1-butanol, acetic anhydride, ethylene, ethylene oxide: G2 Gasoline, hexane: G3 Acetaldehyde, ethyl ether: G4 - Strong structure with increased wall thickness compared to standard applications - Clearances and depths at fitting parts, joints, shaft penetrations, etc., are dimensioned and precise according to explosion grades Sanmei is the official distributor (trading company) of Nidec Techno Motor.

● Explosion-proof type certification compliant products Products certified by the Ministry of Health, Labour and Welfare designated explosion-proof type certification agency ● High safety High safety that can withstand pressure even if gas explodes and poses no risk of igniting external explosive gases ● Compliance with factory electrical equipment explosion-proof guidelines Recommended for use in handling explosive atmospheres in various chemical plants in terms of structure and characteristics ● Suitable for Class I hazardous locations (Zone 1) Can be used in locations where explosive atmospheres are likely to be generated under normal conditions ● Applicable in most hazardous atmospheres due to ignition degree G4, explosion grade d2 Acetone, ammonia, acetic acid, carbon monoxide, ethane, toluene, ethyl acetate, methanol, propane, benzene, methane, carbon dioxide: G1 Ethanol, isopentyl acetate, butane, 1-butanol, acetic anhydride, ethylene, ethylene oxide: G2 Gasoline, hexane: G3 Acetaldehyde, ethyl ether: G4 - Strong structure with increased wall thickness compared to normal applications - Gaps and depths at fitting parts, joints, and shaft penetration parts are dimensioned and precise according to explosion grades Sangmei Co., Ltd. is an authorized distributor (trading company) of Nidec Techno Motor Corporation.

● Simple structure without a power amplification device The operating electromagnet is a short-stroke type of three-phase AC, and the movable iron core directly applies braking force to the brake disc, resulting in a simple structure. ● Easy inspection and adjustment of the brake section Internal inspection and brake pad adjustment can be done simply by removing the brake cover. ● Compatible with Class 1 hazardous locations (Zone 1) Can be used in locations where explosive atmospheres are likely to be generated under normal conditions. ● High reliability with no brake pad chattering The brake disc is suspended by a flow and spring, preventing sliding except during braking, which eliminates abnormal heating or wear due to chattering motion, regardless of whether the motor is mounted horizontally or vertically. ● Low impact force and safe A unique cushioning device is provided to absorb the kinetic energy of the movable element when the operating electromagnet is energized, resulting in low impact force. ● Usable until the brake lining reaches 1mm The brake lining is made from a material with a high wear coefficient and an extremely low wear rate, allowing a thickness of 3mm to be used until it reaches 1mm, eliminating the need for frequent lining replacements. ● Ignition degree G4, applicable in most hazardous atmospheres, explosion grade d2 Sangmei Co., Ltd. is an authorized distributor (trading company) of Nidec Techno Motor Co., Ltd.

The Si servo3 is a stepping servo of the smallest class in the industry. It provides high-precision feedback of position and speed information through servo control, enabling high-precision positioning and smooth operation without losing steps. During operation, it moves steadily through servo control. When stopped, it halts at the targeted position without hunting, thanks to the combination of servo control and stepping control. 【Features】 ■ Operates without a higher-level controller by using dedicated software ■ Ultra-high-speed motor that rotates at up to 6000 rpm ■ Equipped with a 10,000 pulses/rev encoder in all models ■ Motors available in types ranging from 0.05N to 2.0N ■ Industry's smallest class driver, about the size of a business card ■ Nine types of motor lineup ■ Capable of standalone operation with point table function 【Adoption Results】 Used in universities for testing machines, tabletop machines, small devices, image processing devices, tabletop inspection devices, and transport devices. Ball screw actuators are also available. This is a low-cost, high-precision stepping servo. *For more details, please refer to the PDF materials or feel free to contact us.

It can operate without a higher-level controller by using dedicated software. By using servo control, it provides high-precision feedback of position and speed information, enabling high-precision positioning and smooth operation without loss of steps. During operation, it moves steadily through servo control. When stopping, it combines servo control and stepping control to stop at the targeted position without hunting. Due to the absence of hunting, there are many successful applications in tabletop inspection machines. As shown in the related video on this page, the completion signal for positioning is sent from the driver to the camera, allowing for simple inspections using only the Si servo 3 and the camera. 【Features】 - No micro-hunting when the motor is stopped - Ultra-high-speed motor rotating at up to 6000 rpm (0.3N type) - All models are equipped with a 10,000 pulses/rev encoder - Motors available from 0.05N to 2.0N types - Industry's smallest class driver, about the size of a business card - Nine types of motor lineup - Capable of standalone operation with point table function *For more details, please refer to the PDF document or feel free to contact us.

By using dedicated software, it can operate without a higher-level controller. With servo control, it provides high-precision feedback of position and speed information, enabling high-precision positioning and smooth operation without loss of step. During operation, it works persistently through servo control. When stopped, it halts at the targeted position without hunting by overlapping servo control and stepping control. 【Features】 - No micro-hunting when the motor is stopped - Ultra-high-speed motor that rotates at up to 6000 rpm - All models are equipped with a 10,000 pulses/rev encoder - Motors available from 0.05N to 2.0N types - Industry's smallest class driver, about the size of a business card - Nine types of motor lineup - Capable of standalone operation with point table function 【Adoption Examples】 1. Vision systems - Positioning of camera axes 2. Circuit board inspection equipment (desktop model) - Appearance inspection equipment for circuit boards 3. Lamination equipment - Sheet lamination equipment There are various other applications in different fields. It is a low-cost, high-precision stepping servo. *For more details, please refer to the PDF document or feel free to contact us.

It can operate without a higher-level controller by using dedicated software. By using servo control, it provides high-precision feedback of position and speed information, enabling high-precision positioning and smooth operation without loss of steps. The dedicated software can be downloaded from our company website, where the latest parameters have been added, allowing you to utilize a wealth of features. Functions such as "servo tuning," "basic functions," "torque limit function," "origin return and jog," "input branching," and "normal branching" are categorized by application, allowing easy access to the necessary parameter groups. A new "auto-tuning" dedicated screen has been added to achieve time-saving tuning. The amplifier is equipped with a USB port, allowing direct connection to a computer for teaching on the computer. The programming capacity is 256 lines, enabling various motion specifications such as "acceleration/deceleration time," "waiting time," "S-curve," "loop (repetitive motion)," "M code," "torque settings," "movement amount," and "speed." * The point table function can be used when a higher-level controller is not needed. * For more details, please refer to the PDF documentation or feel free to contact us.

We can accommodate power ranges from several tens of watts to several kilowatts. We manufacture brushless DC motors with corresponding voltage, output, and rotation speed, even with battery power, and they are adopted for a wide range of applications. Additionally, we standardly use rare earth magnets to propose compact, lightweight, and high-efficiency motors. 【Applications】 For AGVs, elevator door opening and closing, automatic doors, drones, fans, medical equipment such as MRI machines, and for caregiving devices like electric wheelchairs. 【Features】 - We standardly use rare earth magnets, allowing us to propose compact and lightweight high-efficiency motors. - The small-capacity types have drivers built into the motor for compactness. - Our unique motor structure has achieved an output of 400W even in low-pressure models. We also handle water-cooled types up to 8kW at 5000r/min. Depending on the conditions, there may be cases where we can accommodate requests even outside our standard manufacturing range, so please feel free to consult us. *Please feel free to inquire about other uses not mentioned above or those discontinued by other manufacturers. Sanmei is an official distributor (trading company) of FEW.

We can manufacture from one unit as needed, ranging from winding types with an output of 3kW or less to permanent magnet types with a few watts. 【Applications】 Standard Series: For AGV drive, opening and closing of valves and circuit breakers, driving electric transport vehicles, power cylinders, electric hoists, golf carts, and for driving massage machines. Neo Mini Series: For assistive driving of transport vehicles, for lifting medical equipment, etc. 【Capacity】 Standard Series Output: 100W to 3kW Neo Mini Series Output: 35W to 200W 【Features】 ■ Compact and lightweight, using rare earth magnets for the field structure ■ Achieved a weight of 10g per 1W output ■ Brush lifespan of 3000 to 4000 hours achieved

The electric motor is of the slot core type, designed to be driven by a harmonic gear, with a rated rotational speed set at 3000 r/min. 【Applications】 For robots (wrist, first and second joints), insertion machines, IC bonders, high-precision XY tables, etc. 【Capacity】 Output: 30W to 1300W 【Options】 With oil seal, with connector, drip-proof type, with key, with cab tire cable, with flat seat *Please contact us if you specify options such as brakes. *The brake is a holding brake of the excitation release type and cannot be used for braking purposes. Sanmei is an authorized distributor (trading company) of FEW.