DKSHマーケットエクスパンションサービスジャパン Product Lineup

A simple din flow cup widely used in the United States. Comes with 5 cups for different viscosity ranges.

A handy device that allows for quick and convenient measurement of viscosity by simply taking a sample of paint and measuring the flow time. The diameters conform to the standards of DIN 53 211 (Model 321) and EN ISO 2431 (Model 322).

Equipment for measuring coating thickness using an edge-cutting method. It is very easy to operate, taking advantage of the P.I.G. 455, and allows for easy and accurate measurement by drilling holes in the coated surface with a conical drill at a specified angle, using a microscope. The measurement range with the standard drill is 3 to 300μm. Additionally, by changing the drill, measurements of 200/500/1000μm are also possible.

A destructive (cutting method) dry film thickness gauge that complies with standards. It is also capable of measuring multilayer coatings. The measurement range with the standard chip is 0 to 200μm. Additionally, by replacing the chip, measurements of 200/500/1000/2000μm are also possible.

The central wheel has an eccentric cam, and by rolling it over a wet coating surface, the film thickness is measured. The measurement range is from 0 to 1500μm, and the measurement range is divided into 8 types.

It is possible to easily apply paint to any substrate using a spray method. By operating the control panel, you can set the amount of spray movement, its speed, the number of strokes, and the ventilation time, allowing you to meet various requests by changing the settings.

The electric drive film applicator can apply a uniform and consistent coating of paint on glass, chart paper, thin films, etc., by attaching various applicators (such as model 358). The speed can be adjusted up to 99 mm/s, and the maximum coating width is approximately 330 x 345 mm. Optional vacuum suction plates and glass plates are available.

A device that allows for uniform application by placing a sample on a glass platform and rotating it, utilizing centrifugal force. It can create samples ranging from 80 to 200 mm. The rotation speed can be adjusted within the range of 100 to 2,000 rpm.

24 types of chart paper in different sizes, patterns, and colors. Using a film applicator on the chart paper, paint is applied to examine the opacity.

Pocket-sized scratch hardness tester. It can also be used for surface testing of curved surfaces, and the standard pin has a carbide ball tip with a diameter of 0.75mm, compatible with three levels of spring pressure (0–3N / 0–10N / 0–20N). Additionally, there are optional tips with diameters of 0.5mm and 1.0mm.

AutoGrid ConSmart enables distortion measurement in press environments and provides a system that combines ease of use and portability. By utilizing the latest camera technology and laptop computers, maximum portability has been achieved.

Ericsson's products are manufactured to solve various problems encountered in testing within the lacquer and coating industry. They can accommodate different raw materials, lacquers, paints, and coatings both before and after application.

The "m-VROC" is an ultra-micro sample viscometer that employs an innovative measurement system utilizing Microfluidics and MEMS (Micro-Electro-Mechanical Systems) technology. It demonstrates high precision and high reproducibility even with small sample volumes (20μL and above). Additionally, this product allows for easy and fast operation and is compatible with non-Newtonian fluids. 【Features】 ■ Easy and fast operation ■ High shear rate compatibility (up to 1.4×10^6/sec) ■ Closed system measurement ■ Accurate temperature control (4–70℃) *For more details, please refer to the PDF document or feel free to contact us.

The "micro VISC" is a portable ultra-micro sample viscometer measuring 145mm x 2161mm and weighing 0.8g. It employs an innovative measurement system utilizing microfluidic control engineering and microelectromechanical systems (MEMS) technology. It demonstrates high precision and high reproducibility even with small sample volumes (from 100μL), and measurements can be completed in just 1 to 2 minutes with simple and quick operations. 【Features】 ■ Easy and quick operation ■ High precision and high reproducibility ■ Small sample (from 100μL) ■ Portable ■ No cleaning required (uses disposable syringes) *For more details, please refer to the PDF document or feel free to contact us.

The Face Profiler app from Laser Technology calculates bench height, minimum and optimal overburden, drill hole angles and offsets, and hole depth, among other factors. It further eliminates guesswork in blast design and reduces the potential for production delays. By using the TruPulse laser rangefinder in conjunction with the Face Profiler, profiles can be measured accurately, minimizing the risk of accidents caused by rock and vibration. The base for each profile can be set up in just two simple steps, measuring the bottom and the top. By combining the Face Profiler with the professional-grade TruPulse laser rangefinder, a complete profiling system can be easily and affordably provided to anyone, maximizing safety, aiding inventory management, and helping with cost management associated with blast design. Product introduction video: https://www.lasertech.com/videos/TruPulse-Face-Profiler-Working-in-Heavy-Rain-Video.mp4