ウィルコ Product Lineup

Specification: This product has a lower screw head than the small screws with cross holes according to the Japan Camera Industry Association standard (JCIS10-70) JIS standard. It is also referred to as No. 0 screws, micro screws, or camera screws. It is compliant with EU-RoHS standards.

• bolt

Specification: This is a low-profile screw head compared to the cross-hole pan head screws of the Japan Camera Industry Association standard (JCIS10-70) JIS standard. It is also referred to as number 0 screws, micro screws, or camera screws. It is compliant with EU-RoHS standards.

• bolt

Supports the realization of thin and lightweight ultra-thin head-shaped screw products. Head height is 35% compared to JIS pan head. Laminate is a trademark of Nitto Seiko. Compliant with EU-RoHS standards.

• bolt

Supports the realization of thin and lightweight ultra-thin head-shaped screw products. Head height is 35% compared to JIS pan head. Laminate is a trademark of Nitto Seiko. Compliant with EU-RoHS standards.

• bolt

This is a screw that adds two functions to a pan head screw: a flat washer (large seating surface) and a spring washer (for preventing loosening). It enhances vibration resistance and increases the anti-loosening effect. The cup screw is a registered trademark of Nitto Seiko Co., Ltd. It is compliant with EU-RoHS standards.

• bolt

This is a screw that adds two functions to a pan head screw: a flat washer (large seating surface) and a spring washer (for preventing loosening). It enhances vibration resistance and increases the anti-loosening effect. The cup screw is a registered trademark of Nitto Seiko Co., Ltd. It is compliant with EU-RoHS standards.

• bolt

This is a screw that adds two functions to a pan head screw: a flat washer (large seating surface) and a spring washer (for preventing loosening). It enhances vibration resistance and increases the anti-loosening effect. The cup screw is a registered trademark of Nitto Seiko Co., Ltd. It is compliant with EU-RoHS standards.

• bolt

The head shape resembles the upper part of a sphere. Due to its larger outer diameter compared to other heads, it allows for a wider contact area on the seat surface. It is compliant with EU-RoHS standards.

• bolt

The head shape is like the upper part of a sphere that has been cut off. Compared to other heads, it has a larger outer diameter, allowing for a wider contact area on the seat surface. It is compliant with EU-RoHS standards.

• bolt

The head shape resembles the upper part of a sphere. Due to its larger outer diameter compared to other heads, it allows for a wider contact area on the seat surface. It is compliant with EU-RoHS standards.

• bolt

This is a screw with a slightly rounded head and a conical-shaped seat. It is necessary to perform a countersink on the material being tightened. It is compliant with EU-RoHS standards.

• bolt

This is a screw with a slightly rounded head and a conical-shaped seat. It is necessary to perform counterboring on the material being tightened. It is compliant with EU RoHS standards.

• bolt

The head shape is a trapezoidal shape with a rounded top. Compared to pan head screws, the head diameter is about 10-20% larger, allowing for a wider contact area, which helps prevent seat surface sinking. It is compliant with EU-RoHS standards.

• bolt

This is a screw with a slightly rounded head and a conical-shaped seat. It is necessary to perform a countersink on the material being tightened. It is compliant with EU RoHS standards.

• bolt

This is a screw with a slightly rounded head and a conical-shaped seat. It is necessary to perform counterboring on the material being tightened. It is compliant with EU RoHS standards.

• bolt

This is a screw with a slightly rounded head and a conical-shaped seat. It is necessary to perform a countersink on the material being tightened. It is compliant with EU-RoHS standards.

• bolt

It is a small screw with a flat top and a conical-shaped seat. It is used when you do not want the head of the screw to protrude. The material being fastened needs to have a countersink. It is compliant with EU RoHS standards.

• bolt

It is a small screw with a flat top and a conical-shaped seat. It is used when you do not want the head of the screw to protrude. The material being fastened needs to be countersunk. It is compliant with EU RoHS standards.

• bolt

It is a small screw with a flat top and a conical-shaped seat. It is used when you do not want the head of the screw to protrude. The material being tightened needs to be countersunk. It is compliant with EU-RoHS standards.

• bolt

This is a pan head screw with a spring washer incorporating a nylon 66 set washer (NNS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. The washer has excellent abrasion resistance, oil resistance, and gas barrier properties. It is compliant with EU-RoHS standards.

• bolt

This is a pan head screw with a spring washer incorporating a nylon 66 set washer (NNS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. The washer has excellent abrasion resistance, oil resistance, and gas barrier properties. It is compliant with EU-RoHS standards.

• bolt

This is a pan head screw with a spring washer incorporating a nylon 66 set washer (NNS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. The washer has excellent abrasion resistance, oil resistance, and gas barrier properties. It is compliant with EU-RoHS standards.

• bolt

This is a pan head screw incorporating a nylon 66 set washer (NNS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. The washer has excellent abrasion resistance, oil resistance, and gas barrier properties. It is compliant with EU-RoHS standards.

• bolt

This is a pan head screw incorporating a nylon 66 set washer (NNS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. The washer has excellent abrasion resistance, oil resistance, and gas barrier properties. It is compliant with EU-RoHS standards.

• bolt

This is a pan head screw incorporating a nylon 66 set washer (NNS series). It prevents the washer from falling off when the screw is removed, thereby reducing the workload during assembly. The washer has excellent abrasion resistance, oil resistance, and gas barrier properties. It is compliant with EU-RoHS standards.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it eliminates the hassle of setting the washer, thereby improving work efficiency. It is also referred to as a Sems screw. It is compliant with EU-RoHS standards.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it saves the trouble of setting the washer and improves work efficiency. It is also referred to as a Sems screw. It is compliant with EU-RoHS standards.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it saves the trouble of setting the washer and can improve work efficiency. It is also referred to as a Sems screw. It is compliant with EU-RoHS standards.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it saves the effort of setting the washer and improves work efficiency. It is also referred to as a Sems screw. It is compliant with EU-RoHS standards.

• bolt

The incorporated washer complies with ISO standards. Since the washer is integrated with the screw, it can improve work efficiency. It is also referred to as a Sems screw.

• bolt

The washer incorporated is ISO standard. Since the washer is integrated with the screw, it can improve work efficiency. It is also referred to as a Sems screw.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it saves the trouble of setting the washer and improves work efficiency. It is also referred to as a Sems screw. It is compliant with EU-RoHS standards.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it saves the trouble of setting the washer and improves work efficiency. It is also referred to as a Sems screw. It is compliant with EU-RoHS standards.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it eliminates the hassle of setting the washer, thereby improving work efficiency. It is also referred to as a Sems screw. It is compliant with EU-RoHS standards.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it saves the trouble of setting the washer and improves work efficiency. It is also referred to as a Sems screw. It is compliant with EU-RoHS standards.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it eliminates the hassle of setting the washer, thereby improving work efficiency. It is also referred to as a Sems screw. It is compliant with EU-RoHS standards.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it eliminates the hassle of setting the washer, thereby improving work efficiency. It is also referred to as a Sems screw. It is compliant with EU-RoHS standards.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it saves the effort of setting the washer and can improve work efficiency. It is also referred to as a Sems screw.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it saves the trouble of setting the washer and improves work efficiency. It is also referred to as a Sems screw. It is compliant with EU-RoHS standards.

• bolt

A washer is incorporated into the screw. Since the washer does not come off the screw, it eliminates the hassle of setting the washer, thereby improving work efficiency. It is also referred to as a Sems screw. It is compliant with EU-RoHS standards.

• bolt

This is a self-tapping screw specifically designed for thermoplastic resins. The screw thread features two threads at a 45° angle, with a pitch larger than that of B-tight. There is less occurrence of galling during tightening, and it is less likely to experience screw spin (stripping) even with repeated use. The screw can be driven in quickly and is less likely to cause whitening or cracking of the boss. It is compliant with EU-RoHS standards.

• bolt

This is a representative type of screw that is widely used in various fields. It is compliant with EU-RoHS standards.

• bolt

This is a representative type of screw that is widely used in various fields. It has excellent electrical conductivity and is non-magnetic, making it suitable for use in both high and low voltage equipment and conductive parts. Its golden appearance also makes it suitable for decorative purposes. It is compliant with EU RoHS standards.

• bolt

This is a representative type of screw that is widely used in various fields. It is compliant with EU-RoHS standards.

• bolt

Nylok is a reliable locking technology that permanently attaches special nylon to the screw threads. The principle of Nylok's locking mechanism is that when the screw is tightened, the elastic rebound force of the attached special nylon generates a strong frictional bonding force across the entire screw thread on the opposite side of the processed part, providing a permanent locking function against vibrations and shocks. It demonstrates exceptional locking effectiveness in areas with frequent use. This offers advantages not found in locking products that use adhesives or lock nuts that deform the screw threads. It is compliant with EU-RoHS standards. Nylok is a registered trademark of Nylok LLC.

• bolt