TAKACHI ELECTRONICS ENCLOSURE CO., LTD. List of Products and Services

Reinforced aluminium rack mounting panel conforming to EIA standards. Surface is hairline brushed for a luxurious finish.

Aluminium rack mounting panel enclosure with handles conforming to EIA standards. Surface is hairline brushed for a luxurious finish.

Aluminium enclosure with opening/closing cover for easy access to the inside of the case. Flat handle is available in 2 configurations: Normal "N" type, and Key Lock "K" type. A large selection of 252 different sizes in 2 different colors to choose from. Suitable for use as industrial control panels, machine controllers, power supply, and more. Scheduled launch *New size Height H=266 is scheduled for launch in Fall/Winter 2025.

19” rack mount enclosure with insertion type front/rear panels, giving it a beautiful appearance. Suitable for use as audio/visual equipment, communication equipment, rack mount computers, measuring instruments and more. A large selection of 35 different sizes in 4 different colors to choose from. Screw is selectable Plus head or Hex head.

19” rack mount enclosure with detachable panels. The inner surface is unfinished, allowing the enclosure to be conductive. Suitable for use as audio/visual equipment, communication equipment, rack mount computers, measuring instruments and more. A large selection of 28 different sizes in 2 different colors to choose from. Screw is selectable Plus head or Hex head. H=222 is scheduled for launch in Fall/Winter 2025.

EMC shielded 19" enclosure with handles. Detachable front/rear panels and Captive screws allow for easy maintenance as there is little risk of the screws dropping out and getting lost. Suitable for use as audio/visual equipment, communication equipment, rack mount computers, measuring instruments and more. A large selection of 28 different sizes in 2 different colors to choose from. Screw is selectable Plus head or Hex head.

19” Rack Mount Enclosure with 4 extruded aluminium frames. Flat and rugged design rack mounting aluminium case with handles. Suitable for use as audio/visual equipment, communication equipment, rack mount computers, measuring instruments and more. A wide selection of 35 different sizes in 4 different colors to choose from. Screw is selectable Plus head or Hex head.

19” Rack Mount Enclosure with 4 extruded aluminium frames. Flat and rugged design rack mounting aluminium case with handles. Suitable for use as audio/visual equipment, communication equipment, rack mount computers, measuring instruments and more. A wide selection of 35 different sizes in 4 different colors to choose from. Screw is selectable Plus head or Hex head. H=222 is scheduled for release in Fall/Winter 2025.

This is a shock-resistant aluminum case with a carrying handle. The carrying handle has a load capacity of 20 kg. The corner guards are made of elastic TPE (thermoplastic elastomer), which provides a non-slip surface and also functions as rubber feet. It features an additional five height types, offering a total of 10 height sizes, 7 width sizes, and 5 depth sizes, resulting in a total of 294 available sizes. It can be used for various applications such as measuring instruments, controllers, industrial embedded computers, power supplies, and battery systems. Size: 294 sizes Color options: 12 types (the main case is available in black and silver, the carrying handle in black and gray, and the corner guards in black, gray, navy, and red, providing various combinations) [Release Date] *New sizes Height H=266 is scheduled for launch in Fall/Winter 2025.

Rugged designed aluminum enclosure with TPE (Elastomer) corner guards. The corner guards also act as non-slip rubber feet. A new height of 5 types has been added, making it possible to choose from a total of 430 sizes, including height 10, width 7, and depth 7 sizes. It can be used for various applications such as measuring instruments, controllers, industrial embedded computers, power supplies, and storage battery devices. Size: 430 sizes Color specifications: 8 types (the main case is available in black and silver, and the corner guards come in a combination of black, gray, navy, and red in four colors) [Release Schedule] *New sizes Height H=266 is scheduled for release in Fall/Winter 2025.

Shielding gasket allows the enclosure to be EMC shielded. Rugged designed EMC shielded aluminium enclosure with TPE (elastomer) corner guards. Corner guards also act as non-slip rubber feet. Suitable to be used as an easy maintenance desktop case due to its detachable front/rear panels. Captive screws allow for ease of maintenance as there is little risk of the screws dropping out and getting lost. A large selection of 387 different sizes. A total of 4 selectable color combinations with a silver anodized body and 4 corner guard colors - black, gray, navy and red. H=99, 115, 149, 222, 266 sizes scheduled to be launched in Fall/Winter 2025.

Elegantly designed aluminum enclosure with front/rear panels. A large selection of 430 different sizes to choose from. Top/bottom covers and front/rear panels are made from easily customizable sheet aluminum material. Versatile aluminum enclosure suitable for use as measuring instrument, controller, industrial embedded computer, power supply, audio amplifier, and more. Feet is selectable from adhesive rubber and aluminum types. Scheduled launch *New size Height H=266 is scheduled for launch in Fall/Winter 2025.

Elegantly designed aluminium enclosure with easily detachable front/rear panels. Captive screws allow for ease of maintenance as there is little risk of the screws dropping out and getting lost. The inner surface is unfinished, allowing the enclosure to be conductive. A large selection of 387 different sizes and 2 colors to choose from. Suitable for use as measuring instrument, controller, industrial embedded computer, power supply, audio amplifier, and others. Feet is selectable from adhesive rubber and aluminium types. The series now includes five additional height types, offering a total of 387 selectable sizes with 9 height sizes, 7 width sizes, and 7 depth sizes. Rubber foot specifications: Rubber feet / Aluminum feet are selectable. Top and bottom cover mounting screw specifications: Phillips screws / Hex socket screws are selectable. Size: 387 sizes Color specifications: 2 types 【Scheduled Release Date】*New sizes Heights H=99, 115, 149, 222, 266 are scheduled for release in Fall/Winter 2025.

Elegantly designed EMC shielded aluminium enclosure with detachable front/rear panels. Suitable to be used as an easy maintenance desktop case due to its detachable front/rear panels. Captive screws allow for ease of maintenance as there is little risk of the screws dropping out and getting lost. A large selection of 387 different sizes and 2 colors to choose from. Suitable for use as measuring instrument, controller, industrial embedded computer, power supply, audio amplifier, and more. Feet are selectable from adhesive rubber and aluminium types.

Round edge designed aluminium enclosure with 4 extruded aluminium frames. Suitable for use as industrial control box, command panel, audio amplifier, power supply, and more. A wide selection of 270 different sizes and 4 colors to choose from. Feet are selectable between adhesive rubber or aluminium type. Cover screw is selectable Plus head or Hex head. Scheduled launch *New size Height H=266 is scheduled for launch in Fall/Winter 2025.

Round-edge designed aluminum chassis with 4 extruded aluminum frames offering strength and a sense of luxury. Suitable for various audio equipment such as audio amplifiers, vacuum tube amplifiers, and power supplies. 5 additional height types have been added, allowing for a total of 270 sizes to choose from, including height sizes of 10, width sizes of 8, and depth sizes of 7. Rubber foot specifications: adhesive rubber feet / aluminum feet are available for selection. Top and bottom cover mounting screw specifications: Phillips screws / hex socket screws are available for selection. Size: 270 sizes Color specifications: 4 types [Release Schedule] *New sizes Height H=266 is scheduled for release in Fall/Winter 2025.

This is an EMC shielded box equipped with a shield gasket at the fitting parts of the upper and lower covers. It features a flat appearance constructed from aluminum extruded side panels on all four sides, making it a sturdy aluminum box. It is a versatile box suitable for various applications such as industrial controllers, operation panels for machine tools, power supplies, and communication equipment. There are five additional height types available, with a total of 270 sizes to choose from, including height 10 sizes, width 8 sizes, and depth 7 sizes. Rubber foot specifications: Adhesive rubber feet / Aluminum feet are available for selection. Upper and lower cover mounting screw specifications: Phillips screws / Hex socket screws are available for selection. Sizes: 270 sizes Color specifications: 2 types [Scheduled Release Date] *New sizes Height H=99, 115, 149, 222, 266 are scheduled to be released in Fall/Winter 2025.

Hinged structure allows easy access for maintenance or replacement of components. 2, 3 and 4 way types are available. A screw type wiring connection is adopted; allowing for easy installation and removal. 4P pole models and no terminal models are available. 【Features】 Protection class: IP68 (24 hours at 1m depth) Operating temperature: -25°C to +60°C Cover tightening torque: 0.5 to 0.6N・m

Economical zipper type soft carrying case with handle. Selectable in 4 different sizes, with each model available with, and without internal foam. Pre-cubed sponge foam allows for a stronger protection of the stored equipment. Suitable for storing delicate devices such as measuring instruments, medical equipment, tools, precision parts, and more. *SC28-21-11□ and SC32-25-16□ models comes with a D-ring which SB1250 (optional) shoulder strap can be attached. Custom inkjet printing or foam customization on the top surface of the case is also possible.

Low price type adhesive aluminum foil sheet for grounding and shielding of enclosures. Conductive adhesive layer maintains conductivity. Aluminum sheet can also be used for removing static electricity and improving running performance when applied to automobiles. 257 x 182mm (B5 size) and 297 x 210mm (A4 size) are available. Convenient for shielding wider area or cutting into the designated shapes.

Curved transparent acrylic case with corner support columns, exclusively for use with Raspberry Pi 4B models. Usable as a display enclosure for a unique and luxurious outlook. 3 models are available: Standard, Layered, and Flanged. Flanged RPA-4B-1F model is compliant with VESA100 (100x100) mounting standards, therefore can be attached onto the backside of display monitors, among others. Screws and standoffs to install Raspberry Pi Board are included. *Raspberry Pi Board is not included. 【Three selectable types】 RPA-4B-1: Single board type RPA-4B-2: Dual-layer motherboard type RPA-4B-3: Wall-mounted type (VESA mount type) *The VESA mount type features mounting holes with a pitch compatible with PC displays (75x75mm/100x100mm). It can be mounted on the back of a PC display or on a wall.

Low price type conductive flexible copper sheet. Conductive adhesive layer maintains conductivity. Copper tape can be soldered onto a metal foil. Copper sheet can also be used for removing static electricity and improving running performance when applied to automobiles. 257 x 182mm (B5 size) and 297 x 210mm (A4 size) are available. Convenient for shielding wider area or cutting into the designated shapes.

A flexible conductive aluminum foil tape. It is a significantly lower-priced conductive tape compared to conventional products. The tape is easy to wrap and stick. Since it uses a conductive adhesive, it can ensure reliable conductivity without reducing the shielding effect. 【Applications】 - Grounding and shielding of enclosures. - Grounding and shielding of cable harnesses and connector terminals. - EMI shield rooms (measures during shielding characteristic measurements). - It can also be used as a tape to eliminate static electricity and improve drivability when applied to automobiles. Tape widths: 8mm, 13mm, 25mm, and 50mm (4 types available). Roll lengths: selectable from 2 meters and 20 meters.

A flexible conductive copper foil tape. It is a significantly lower-priced conductive tape compared to conventional products. The tape is easy to wrap and stick. Since it uses a conductive adhesive, it can ensure reliable conductivity without reducing the shielding effect. 【Applications】 - Grounding and shielding of enclosures. - Grounding and shielding of cable harnesses and connector terminals. - EMI shield rooms (measures during shielding property measurements). - It can also be used as a tape to eliminate static electricity and improve drivability when applied to automobiles. Tape widths: Available in four types: 8mm, 13mm, 25mm, and 50mm. Roll lengths: selectable from 2 meters and 20 meters.

IP65 switch box with 1 ~ 4 Φ22 hole(s) on the top cover. Made from flame retardant UL94V-0 high heat resistant polycarbonate material. Φ22 knock-outs on 2 opposite ends for easy wiring access if required. Exclusive cable gland, B131210G for Φ22 knock-outs is available as optional parts. IP65 protection class is maintained with waterproof switches and the exclusive cable glands installed. Yellow/Black color types available as BTO (built-to-order) at a MOQ of 500 pcs. For custom color order, the material would be changed to ABS UL94HB, with an operating temperature of -10°C ~ +60°C. 4 different sizes available.

Flanged panel type or flanged bracket type extruded aluminium enclosure. Equipped with flanged panel or bracket for easy wall mounting. Anodized finish with clear coating (except for flanged bracket). Available in 73 sizes and selectable in 4 different color combinations : Silver / Silver (SS), Silver / Black (SB), Black / Silver (BS), Black / Black (BB) 【Product Lineup】 Size: 73 size Color options: Silver/Silver (SS), Silver/Black (SB), Black/Silver (BS), Black/Black (BB), four types in total. There is also the EXFS series, which has the same structure as the EXF series and allows for free-size cases with a depth (D dimension) specified in 1mm increments from 40 to 500mm.

Wall mount support arm move easily to the preferred positions. Suitable for command panel on machinery and touch panel controller. Easy installation onto the wall as well. Hole pitch on the monitor bracket is compatible with VESA mount standards. Possible to mount PC display without modification.

Shock-proof design aluminium enclosure equipped with tilt leg for measuring instrument use. Corner guards are designed to be both aesthetically pleasing, and impact resistant. Available in 30 different sizes and 16 different color combinations.

Aluminum enclosure equipped with a highly efficient heat-sink top cover. EMC shielding is achieved by having the unfinished inner sides of the heat-sink top cover, bottom frame and panels, as well as the shielding gasket in contact with one another. Grooves for M3 sliding nut are built into the heat-sink top cover and bottom frame (140mm or wider). Optional nut is available. 64 different sizes available in metallic silver painted finish (unfinished inside for EMC shielding).

Equipped with flanged bracket for easy wall mounting. Aluminum enclosure equipped with a highly efficient heat-sink top cover. Available in 64 different sizes and 2 color combinations.

This is a heat-dissipating heatsink case for the Raspberry Pi Model 4B. Equipped with highly efficient heatsink top cover. Constructed using diecast aluminium for strength and rigidity. The Heat dissipation type and Normal type are available. Available in a Desktop and Flanged wall mount configuration. Flanged wall mount type is compatible with VESA Mount Standards (75 x 75mm / 100 x 100mm) and can be installed on the back side of PC displays, etc. Raspberry Pi board is not included. Note that oil bleed may occur with thermal conductive sheets.

Heatsink top cover case exclusively for use with the Raspberry Pi 4 Model B and Raspberry Pi 5. Equipped with highly efficient heatsink top cover. Constructed using diecast aluminium for strength and rigidity. 2 types are available : an efficient heat dissipation type and a normal type. Wall mount flange is compatible with VESA mount standards (75 x 75mm / 100 x 100mm), and can be installed on the back side of PC displays, etc. H type comes with thermal conductive sheets.

DIN Rail mount heat-sink case exclusively for use with Raspberry Pi 4 model B. Equipped with highly efficient heat-sink top cover. Constructed using diecast aluminium for strength and rigidity. The Heat dissipation type is available for both the Pi 4B and 5, while the Normal type is only available for the Pi 4B. Raspberry Pi board is not included. Note that oil bleed may occur with thermal conductive sheets. Max load: 300g Operating temperature: -20℃ ～ +80℃

Expansion PCB for standard Raspberry Pi boards. Use to install expansion parts or components. Expansion PCB can also be utilized on RPI-4B and RPA series cases. Environmentally friendly lead-free solder. RoHS3 compliant.

Network plastic box attached with shockproof silicone corner guards. Suitable for industrial tablet, measuring equipment, controller, and various other applications. A total of 6 color combinations available with 3 corner guard colors - dark gray, emerald, indigo - and 2 plastic box colors - dark gray and off-white.

Desktop-type sloped enclosure designed based on ergonomic angles and design. High waterproof protection class of IP67. 【What is IP67?】 It can be submerged in water at a depth of 1 meter for 30 minutes without any water ingress. The sides feature an easy-to-hold streamlined design, making it usable as a handheld device. Available in 6 sizes and 2 colors.

Suitable to be installed into enclosures with material thickness of 1.0mm to 3.5mm. Cover can be opened/closed without any tool for easy battery replacement. Lineup: 5 different battery layouts: AA x 2, AA x 3, AA x 4, AAA x 2 and AAA x 4 2 colors available: black and off-white Each layout comes in 2 models: with lead-wire, and without lead-wire. "+" and "-" markings prevent incorrect placement of battery. *The dimensions of alkaline or manganese batteries may vary depending on country and brand. Use optional battery cushion sponge to prevent rattling.

Aluminum enclosure with mount bracket for 35mm DIN Rail. Available in 6 different sizes. Conductive finish on internal surface for conductivity and grounding. Easy maintenance with detachable cover. Maximum load : 3kg

Stopper bracket for use with 35mm DIN Rail to keep an attachment at a fixed location. TKR-TWE1 is used with small DIN Rail attachment parts. For larger / higher attachment parts, TKR35-1 is recommended for providing additional support.

Economically priced end stopper bracket for use with 35mm DIN Rail. Can be used to fix terminal blocks or modules. Included screws allow affixing of stopper brackets firmly at a fixed location.

IP68 snap-lock mini panel-mount connector for easy and frequent connection / disconnection. Can be attached / detached while installed on panels or enclosures. 4P and 5P pole models are available. Plug-socket connector type consisting of the plug side (male) and socket side (female). Screw type connection method; soldering or special tools are not required. Screwdriver flathead tip width of 3mm is recommended. Screws may be screwed in firmly. Use a screwdriver with proper grip handles to loosen it. Applicable cable size range can be expanded by removing the inner sealing insert.

10x10mm threaded cube shape standoff with a thread on 4 faces. M3 and M4 thread models available. Conveniently usable when installing PCB or metal plate upright. CUBE can also be used to make a simple housing by vertically aligning the plates.

Plated Through Holes (PTH) type universal PCB with a 2.54mm hole-to-hole pitch. Inexpensive and economical PCB made using robust, heat-resistant and non-conductive glass epoxy. Easily mounted onto bosses or standoffs via the mounting holes at each corner. Environmentally friendly lead-free solder. RoHS3 compliant. 5 different sizes available, with PCB100-160 being of Eurocard (3U) format size.

This is an aluminum or stainless steel plate that can be manufactured with specified dimensions in 0.1mm increments. We can produce and deliver it within a short lead time of 3 days from just one piece. TAKACHI also accepts orders for hole processing of panel plates, inkjet printing, color anodizing, cell spacers, and stud welding.

For installation of enclosures, PCB and other parts onto a DIN Rail. Robust metallic material allows rigid mounting on DIN Rails. Simple installation and removal via the pull lever. Load capacity: 10kg [Material] Base, lever: Steel plate Spring: Iron