TAKACHI ELECTRONICS ENCLOSURE CO., LTD. Product Lineup

This is a heat-dissipating heatsink case for the Raspberry Pi Model 4B. Equipped with highly efficient heatsink top cover. Constructed using diecast aluminium for strength and rigidity. The Heat dissipation type and Normal type are available. Available in a Desktop and Flanged wall mount configuration. Flanged wall mount type is compatible with VESA Mount Standards (75 x 75mm / 100 x 100mm) and can be installed on the back side of PC displays, etc. Raspberry Pi board is not included. Note that oil bleed may occur with thermal conductive sheets.

Heatsink top cover case exclusively for use with the Raspberry Pi 4 Model B and Raspberry Pi 5. Equipped with highly efficient heatsink top cover. Constructed using diecast aluminium for strength and rigidity. 2 types are available : an efficient heat dissipation type and a normal type. Wall mount flange is compatible with VESA mount standards (75 x 75mm / 100 x 100mm), and can be installed on the back side of PC displays, etc. H type comes with thermal conductive sheets.

DIN Rail mount heat-sink case exclusively for use with Raspberry Pi 4 model B. Equipped with highly efficient heat-sink top cover. Constructed using diecast aluminium for strength and rigidity. The Heat dissipation type is available for both the Pi 4B and 5, while the Normal type is only available for the Pi 4B. Raspberry Pi board is not included. Note that oil bleed may occur with thermal conductive sheets. Max load: 300g Operating temperature: -20℃ ～ +80℃

Curved transparent acrylic case with corner support columns, exclusively for use with Raspberry Pi 4B models. Usable as a display enclosure for a unique and luxurious outlook. 3 models are available: Standard, Layered, and Flanged. Flanged RPA-4B-1F model is compliant with VESA100 (100x100) mounting standards, therefore can be attached onto the backside of display monitors, among others. Screws and standoffs to install Raspberry Pi Board are included. *Raspberry Pi Board is not included. 【Three selectable types】 RPA-4B-1: Single board type RPA-4B-2: Dual-layer motherboard type RPA-4B-3: Wall-mounted type (VESA mount type) *The VESA mount type features mounting holes with a pitch compatible with PC displays (75x75mm/100x100mm). It can be mounted on the back of a PC display or on a wall.

Raspberry Pi aluminium case. Suitable for Raspberry Pi 4B boards. All aluminium, polished and elegant metallic silver finish. 3 different types - Single desktop, Dual desktop, and Single flanged (VESA mount) - are available. Conductive internal surface. *Raspberry Pi Board is not included. 【What is VESA mount type?】 It comes with a flange bracket that has mounting holes for PC displays (75x75mm/100x100mm). It can be mounted on the back of PC displays that have 75x75mm/100x100mm mounting holes. 【Features】 Clenching spacers are pre-installed in the chassis, allowing for direct mounting of the Raspberry Pi board. The inner surface of the aluminum material is conductive, making it easy to connect to ground or earth. TAKACHI also offers customization options for Raspberry Pi cases, including inkjet printing (part numbers and logos), laser marking, size changes, and colored anodized finishes.

DIN Rail mountable Raspberry Pi 4B enclosure. Exclusively for use with 35mm DIN Rail. Able to assemble easily with a flathead screw driver; no screws required. Flat shape type and transparent window type are available. *Caution : Material may easily break when assembling. *Raspberry Pi Board is not included.

Aluminum case for Raspberry Pi 2B / 3B / 3B+ / 4B. Being made entirely of aluminum, it has a higher heat dissipation effect compared to plastic and offers a premium feel. The following six models are available for selection: 1. RPI-1 Board ×1 Desktop type 2. RPI-2 Board ×2 Desktop type 3. RPI-1F Board ×1 Wall-mounted flange type 4. RPI-4B-1 Board ×1 Desktop type 5. RPI-4B-2 Board ×2 Desktop type 6. RPI-4B-1F Board ×1 Wall-mounted flange type The wall-mounted flange type is compatible with VESA standard mounting pitches (75×75mm/100×100mm) and can be mounted on the back of PC displays, etc.

Wall-mounted flange type (VESA mount type) Raspberry Pi case. The wall mount screw pitch (75 x 75mm / 100 x 100mm) of RPI-4B-1F is compatible with VESA, allowing it to be installed on walls or the back of PC displays. Superior heat dissipation all aluminium case with elegant metallic silver coating finish. The internal part is made to be conductive. Two types are available for selection: For Raspberry Pi 4B: RPI-4B-1F For Raspberry Pi 2B / 3B / 3B+: RPI-1F TAKACHI can produce unique Raspberry Pi cases with original prints using an inkjet printer, as well as modifications in size and shape, creating one-of-a-kind designs.

This is a DIN Rail mount plastic box exclusively for use with Raspberry Pi. Compatible with Raspberry Pi 2B / 3B / 3B+. Selectable from a flat type and a type with a transparent window. Can be directly mounted on a DIN Rail, allowing for easy installation of the Raspberry Pi in control panels or plastic boxes. TAKACHI also offers printing of original designs with an inkjet printer - realizing your one and only Raspberry Pi enclosure.

Expansion PCB for standard Raspberry Pi boards. Use to install expansion parts or components. Expansion PCB can also be utilized on RPI-4B and RPA series cases. Environmentally friendly lead-free solder. RoHS3 compliant.

2.54mm hole-to-hole pitch pin socket connector. Utilize with RPCB expansion PCB for Raspberry Pi series. 4 (2 pin x 2) pin and 40 (20 pin x 2) pin models are available.

Exclusively for use with Raspberry Pi models. 3 different Single desktop, Dual desktop, and Single flanged are available. New size for Raspberry Pi 5 is now available. The panel power button part may easily bend when the board is not installed. Raspberry Pi board is not included. ※Ethanol or other alcoholic solvents may cause the acrylic panel to crack. Use a neutral cleaner or specialized acrylic cleaning solvent for cleaning.

Heatsink case with cooling fan for Raspberry Pi 5. Equipped with a highly efficient heat-sink top cover and thermal conductive sheets. *Raspberry Pi board is not included.

DIN Rail mount case exclusively for use with the Raspberry Pi 5. Able to assemble easily with a flathead screw driver; no screws required. *Caution : Material may easily break when assembling. Body and base material: ABS resin Color: Gray

Aluminium case compatible with OKdo ROCK 5 Model A and ROCK 4 Model C+ single board computer. Curved arc designed aluminium case with corner support columns. Knurled thumb screw allows easy hand assembly. ROCK single board is not included. *Note that the panel power button part may easily bend when the board is not installed.