エスエヌディ Product Lineup

Ultrasonic power has achieved powerful cleaning without unevenness! After years of research in applied technology, we have developed and commercialized an ultrasonic cleaning machine that balances low cost and high performance, with a proven sales record in a wide range of fields (physical and chemical, industrial, medical, food) and have received high praise.

The oscillator employs a bolt-tightened Langevin transducer that achieves powerful cleaning. The main body and exterior are made of highly corrosion-resistant stainless steel and are robust in design. Thanks to microcomputer control, the set time and temperature are retained even when the power is turned off. This device is designed with safety in mind (over-temperature prevention, over-current protection, dry operation protection).

Heat the cleaning solution in the tank to enhance the cleaning effect. The liquid temperature can be set to any desired temperature using a temperature controller.

The large fully automatic ultrasonic cleaning machine, Standard US-AS series, performs the set cleaning process automatically with just the push of the start switch. A cycle operation that repeats the automatic operation can be set. Water supply, drainage, cleaning, and rinsing can also be operated independently. For more details, please contact us or refer to the catalog.

The US-ASW series large fully automatic ultrasonic cleaning machine features a showering function that performs showering as a pre-treatment/post-treatment for ultrasonic cleaning. The showering before cleaning removes coarse dirt from the items being cleaned, which can shorten the cleaning time. The showering after cleaning can prevent the reattachment of dirt. For more details, please contact us or refer to the catalog.

The large ultrasonic cleaning machine with a shaking mechanism, "YD Series," significantly improves the removal of dirt that could not be eliminated by ultrasound alone. The up-and-down motion during cleaning reduces the cleaning time and alleviates the burden on the operator. 【Product Lineup】 ○US-35YD(A) ○US-50YD(A) ○US-75YD(A) ○US-100YD(A) For more details, please contact us or download the catalog.

- There are three standard models. - The filtration device is a separate type, allowing installation in convenient directions and locations. - It has a function to switch the strength of the ultrasonic cleaning output. - It is equipped with a degassing function. - A filtration filter is included. - It adopts a highly reliable bolt-tightened Langevin-type transducer.

The "US-800 Series" is a tabletop ultrasonic cleaner equipped with two types of cleaning mode functions. It features a warning lamp that alerts you to heater abnormalities. The drainage valve is positioned on the side, allowing for the drainage direction to be changed to either the front or back. Thanks to microcomputer control, the set time and temperature are remembered even when the power is turned off. 【Features】 ■ Equipped with ultrasonic output inspection function ■ No need to apply for high-frequency utilization equipment (US-802-807) ■ PSE compliant product (US-801) ■ S-mark certified (US-801) *For more details, please download the PDF or feel free to contact us.

The "US-KSII Series" is a tabletop ultrasonic cleaning machine that achieves powerful cleaning through an independent BLT vibration method. The transducer employs a bolted Langevin-type transducer that realizes powerful cleaning. The main body is made of stainless steel, both the cleaning tank and exterior, which is highly resistant to corrosion and robust. Thanks to microcomputer control, the set time and temperature are retained even when the power is turned off. 【Features】 ■ No need to apply for high-frequency equipment ■ The drainage valve is located on the side, allowing drainage from either the back or front ■ Cleaning mode functions (standard cleaning, soft cleaning, intermittent cleaning) ■ Ultrasonic output inspection function ■ Warning function for heater abnormalities ■ Option: Remote function can be added *For more details, please download the PDF or feel free to contact us.

The "US-RSII Series" is a tabletop ultrasonic cleaner that utilizes a low frequency of 28kHz. The parts in contact with the liquid are made of corrosion-resistant stainless steel. This low frequency range is particularly effective for cleaning relatively large volumes of items. With microcomputer control, the set time and temperature are remembered during cleaning. The standard heater allows for heating to any desired temperature. 【Features】 ■ No need to apply for high-frequency equipment ■ Strong cleaning power, effective for removing solid contaminants ■ Ultrasonic oscillation uses a high-cleaning-power Langevin-type transducer ■ Two cleaning modes can be switched (standard cleaning and intermittent cleaning) ■ Comes standard with a polyethylene-coated cleaning basket to prevent damage to items ■ Optional: Remote function can be added *For more details, please download the PDF or feel free to contact us.

The "USL Series" is a tabletop ultrasonic cleaning machine suitable for long, narrow items that cannot be cleaned vertically. It employs a bolted Langevin-type transducer for ultrasonic oscillation, which provides high cleaning power. Both the cleaning tank and the exterior of the main unit are made of corrosion-resistant stainless steel, making it robust. With microcomputer control, the set time, temperature, and output are remembered during cleaning once they have been configured. 【Features】 ■ Horizontal cleaning tank type ■ Ultrasonic oscillation uses a bolted Langevin-type transducer with high cleaning power ■ Both the cleaning tank and the exterior of the main unit are made of corrosion-resistant stainless steel and are robust ■ Suitable for cleaning a wide range of long items such as pipes, shafts, wires, and filters ■ With microcomputer control, the set time, temperature, and output are remembered during cleaning *For more details, please download the PDF or feel free to contact us.

The "USLII Series" is a tabletop cleaning machine suitable for cleaning long and narrow items that cannot be cleaned vertically. It employs a bolt-tightened Langevin-type transducer for ultrasonic oscillation, which provides high cleaning power. Both the cleaning tank and the exterior of the main unit are made of corrosion-resistant stainless steel, making it robust. It is recommended for cleaning a wide range of long items such as pipes, shafts, wires, and filters. 【Features】 ■ Standard heater heating function ■ Cleaning mode switching function (standard/intermittent) ■ Ultrasonic output inspection function ■ Microcomputer control allows the set time and temperature to be remembered during cleaning *For more details, please download the PDF or feel free to contact us.

The "US-JSII Series" is a tabletop cleaning machine that employs a frequency of 100kHz, suitable for precision cleaning with minimal damage. Thanks to its unique oscillation method, ultrasonic waves are dispersed throughout the cleaning tank. The ultrasonic oscillation utilizes a bolted Langevin-type transducer with high cleaning power. The parts in contact with the liquid are made of corrosion-resistant stainless steel. With microcomputer control, the set time and temperature are remembered during cleaning. 【Features】 ■ Reduces damage to the surface of the items being cleaned ■ The exterior uses a new, more durable material than before ■ Comes standard with a polyethylene-coated cleaning basket to prevent scratches on items ■ Option: Remote function can be added *For more details, please download the PDF or feel free to contact us.

The "US-KS Series" is a large standard specification cleaning machine characterized by its simple design and easy operation. It has obtained model designation and does not require application for high-frequency utilization equipment. It is equipped with functions such as degassing and output switching (strong/weak). Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Frequency: 38kHz ■ Drainage method: Manual drainage valve type ■ Functions: Degassing, output switching (strong/weak) ■ Timer setting range: Up to 99 minutes *For more details, please download the PDF or feel free to contact us.

The "US-KS Series" is a large cleaning machine that comes with a lineup including deep tank types and those with overflow features. By default, it is equipped with casters, but it can be changed to adjustable legs upon ordering. Additionally, the standard configuration has the drainage hose outlet at the back, but it can also be modified to have the drainage outlet on the right side upon request. 【Specifications (partial)】 ■ Frequency: 38kHz ■ Drainage method: Manual drain valve type ■ Functions: Degas, output switching (strong/weak) ■ Timer setting range: Up to 99 minutes *For more details, please download the PDF or feel free to contact us.

The "US-KSH Series" is a large cleaning machine equipped with a heating function that enhances the degreasing cleaning effect. The liquid temperature can be set to any desired temperature using a temperature controller. Since it has already obtained model designation, there is no need to apply for high-frequency utilization equipment. Please feel free to contact us when you need assistance. 【Safety Features】 ■ Over-temperature prevention ■ Overcurrent protection ■ Heater dry-run prevention ■ Leakage circuit breaker *For more details, please download the PDF or feel free to contact us.

The "US-KSH Series" is a large cleaning machine equipped with heating functions, available in various types including deep tank models. By default, it comes with caster wheels, but it can be changed to adjustable legs upon ordering. Additionally, the standard configuration includes a drainage hose outlet from the back, but it can also be modified to a drainage outlet on the right side upon request. 【Features】 ■ Heating ■ Degassing ■ Output switching (strong/weak) ■ Water level warning display ■ Water temperature abnormality display *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "SND Ultrasonic Cleaning Machine." It adopts an independent position vibration method, allowing each transducer to be driven independently, which suppresses the generation of standing waves and achieves uniform cleaning. By simply immersing the items, even the backside can be cleaned in a short time, and uniform cleaning quality can be maintained even for complex shapes, enabling labor-saving and automation. 【Features】 ■ Uniform cleaning through independent position vibration method ■ Unique isolate structure in the cleaning tank ■ Consideration for cost, safety features, and simple operation *For more details, please download the PDF or feel free to contact us.

I would like to introduce the "frequency of ultrasonic cleaners." Ultrasonic cleaners operate at frequencies such as 28kHz, 38kHz, and 100kHz, each with its own characteristics. The 28kHz frequency, which vibrates approximately 28,000 times per second, has a high stripping performance, while 100kHz is used for the removal of fine and minute dirt. [Examples of Frequency Usage] - 28kHz: Mainly for cleaning large workpieces such as molds and metal objects - 38kHz: For a variety of cleaning items including metal, plastic, and glass - 100kHz: For the removal of easily stripped dirt such as fine dust and powder *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "Batch-type Ultrasonic Cleaning Machine." We have implemented batch-type ultrasonic cleaning devices tailored for various applications, such as cleaning electrical equipment parts and molds. We have a track record of systems featuring a lifting mechanism that prevents the load of the items being cleaned from resting on the bottom of the cleaning tank, as well as two-tank and three-tank cleaning devices that use special cleaning solutions. 【Case Studies】 ■ Cleaning of electrical equipment parts (cleaning tank + overflow tank) ■ Cleaning of molds (ultrasonic + lifting mechanism) ■ Cleaning of press parts (two-tank ultrasonic cleaning device) ■ Cleaning of machine parts (three-tank ultrasonic cleaning device) *For more details, please download the PDF or feel free to contact us.