星和電機 Product Lineup

The first in the domestic industry: Emergency LED lighting fixtures that can be used in explosion-proof areas Launch of explosion-proof emergency LED lighting fixtures (VZAA series) We have launched the first explosion-proof emergency LED lighting fixtures in the domestic industry that can be installed in explosion-proof areas where there is a risk of explosion or fire due to flammable gases or combustible liquids. Currently, emergency lighting fixtures specified by the Building Standards Act are limited to "incandescent lamps" and "fluorescent lamps," and the use of LEDs as emergency light sources has not been permitted. Therefore, while there have been LED emergency lighting fixtures that received certification based on the Minister of Land, Infrastructure, Transport and Tourism's certification system and passed the self-assessment of emergency lighting fixtures by the Japan Lighting Manufacturers Association, they could not be used in explosion-proof areas where there is a risk of explosion or fire. In response to the many voices wishing for the use of LED as an emergency light source even in explosion-proof areas, we have developed explosion-proof emergency LED lighting fixtures that have passed type testing from the Japan Industrial Safety and Health Association, received certification from the Minister of Land, Infrastructure, Transport and Tourism, and display the JIL mark from the Japan Lighting Manufacturers Association, making us the first in the domestic industry to do so. Orders will begin on September 15, 2016. Since the JIL mark is affixed to the product, the building confirmation process can continue smoothly as before.

The moisture-proof and waterproof emergency LED lighting fixtures (VYAA and VYBA series) comply with protection rating IP55 and can be installed in indoor environments where dust is generated or in outdoor environments without a roof. The inherent energy consumption efficiency is 142 lm/W (*1), achieving one of the highest energy efficiencies in the industry for waterproof emergency LED lighting fixtures. Additionally, by offering two types of body materials—stainless steel for the LYAA series and steel plate for the LYBA series—we provide a total of 160 models with a rich variety of products, allowing you to choose the optimal model according to the installation location. Separate from the light source that operates normally, the emergency light source, which lights up during a power outage using a built-in rechargeable battery, is consolidated at the end of the fixture. When installed in the same area as the moisture-proof and waterproof LED fixtures (LYAA and LYBA series), the design can be unified. Furthermore, the installation spacing during emergency lighting can be wider than that of conventional light sources (fluorescent lamps), allowing for a reduction in the number of installations. This helps to keep initial costs down during new installations or upgrades. <Product Variations> Total of 160 models Brightness: 5 types Mounting types: 8 types Body materials: 2 types Light source color (color temperature): 2 types

The "Joint Box with Internal Wiring" (SBJA Series) has a protection rating equivalent to IP68 against water and dust, making it an optimal structure for the humid environment inside poles. It comes with pre-wired connections, ensuring safety and ease of connection, while also allowing for easy inspection. The breaker and terminal block are sealed within the box, protecting the electrical wiring from moisture and water droplets that may accumulate inside the pole. Additionally, the top cover can be opened for voltage and insulation resistance measurements. This product incorporates the resin bonding technology "AKI-Lock" developed by Polyplastics Co., Ltd. It utilizes a new technology that enables the bonding of different types of resins and between resin and rubber, which was difficult with conventional methods, resulting in improved waterproof performance compared to previous models.

Regarding high-pressure mercury lamps for general lighting, regardless of the mercury content, manufacturing and import/export will be prohibited after December 31, 2020. Therefore, a planned transition to metal halide lamps, high-pressure sodium lamps, and LED lighting is necessary. There are no regulations on continued use for repair and replacement, but mercury lamps and lighting fixtures that use them will be rapidly replaced with high-efficiency LED lighting fixtures. As a result, the market stock of mercury lamps will diminish. Before mercury lamps are phased out, it is essential to promptly establish a planned update for LED lighting fixtures. Seiwa Electric is actively promoting the development of LED products to replace mercury lamp fixtures. *For more details, please refer to the materials. Feel free to contact us with any inquiries.*

The explosion-proof LED lighting fixtures "LZIP/LZBP Series" and the moisture-proof and sealed LED lighting fixtures "LCIP/LCBP Series" are industrial lighting solutions that achieve significant weight reduction and compactness. The main feature is that the explosion-proof LED fixtures for gas vapor and dust explosion protection, as well as the moisture-proof and sealed LED fixtures, are consolidated into a single model. Previously, it was necessary to select fixtures based on the usage location, but now selection can be made with just one action. This reduces the burden on workers, contributes to time savings and cost reduction, and the compact design allows installation in locations that were previously difficult due to size constraints. 【Features】 ■ Broad compatibility with various explosive gases and dust explosion protection ■ Standard urethane resin coating suitable for salt damage areas ■ Can be installed in high-temperature environments (-20°C to +50°C) ■ Reduces the burden on workers, contributing to time savings and cost reduction ■ Significant improvement in inherent energy consumption efficiency *For more details, please refer to the PDF document or feel free to contact us.

The "VZBP Series" is an explosion-proof emergency LED lighting fixture designed with a lightweight and compact structure to reduce the burden of construction work. It is suitable for harsh environments, covering a wide range of explosive gases (including hydrogen gas) and dust explosion protection. The standard coating is salt-resistant. Additionally, we offer the "VCBP Series," a moisture-proof and sealed emergency LED lighting fixture that provides high reliability with excellent energy efficiency and a variety of functions. [VZBP Series Features] - Lightweight - Compact design - Suitable for harsh environments, covering a wide range of explosive gases (including hydrogen gas) and dust explosion protection *For more details, please refer to the PDF document or feel free to contact us.

Seiko Electric Co., Ltd. has launched a safe explosion-proof LED insect trap that can be used with confidence even in explosive hazardous locations (Zone 2). Using UV-A LED to attract insects and capturing them with adhesive paper, this insect trap is a clean device that does not produce unpleasant odors, smoke, or scattered corpses, unlike electric insect traps. We offer three types of installation variations. Additionally, by adopting LED technology, it achieves energy efficiency and a longer lifespan compared to conventional products, allowing for safe and prolonged use. 【Features】 ■ Safe and highly effective ■ Quiet and hygienic ■ Energy-efficient and lightweight design *For more details, please download the PDF or feel free to contact us.

This product is an explosion-proof lighting fixture that incorporates both "white LEDs" and "colored LEDs (red or amber)" in a single unit. It is used for regular lighting with the white LEDs during normal operation, and switches to an alert light that alternates between white and colored LEDs when an abnormality is detected or a danger signal is present. In locations where the buzzer may not be audible due to noise or where rotating lights may be in blind spots, the colored light illuminates the space, achieving high visibility for alerting attention. It contributes to creating a safe and effective working environment by providing warnings, area identification, and guidance in response to changes in the light environment. 【Features】 ■ Combines regular lighting and warning display in one unit ■ Available in two types: red flashing and amber flashing ■ Capable of adapting to various external environments *For more details, please download the PDF or feel free to contact us.

This product is a high-temperature explosion-proof LED lighting fixture that achieves stable operation and reliability in high-temperature environments through appropriate heat dissipation design and the use of high heat-resistant materials. It maintains a luminous flux for 60,000 hours even in an ambient temperature of +70°C, making it safe to use in various factories, including petroleum and chemical plants, where concerns about reduced light source lifespan due to high temperatures exist. Please feel free to contact us when you need assistance. 【Features】 ■ Compatible with ambient temperatures of +70°C, luminous flux maintenance time of 60,000 hours ■ Built-in power supply design reduces installation labor ■ Extensive lineup ■ Improved reliability with temperature protection function *For more details, please download the PDF or feel free to contact us.