We will be exhibiting at Messe Nagoya 2022, held from November 16 to 18, 2022.

By simply dissolving the powder in a solvent and drying it, you can obtain a transparent and high-heat-resistant polyimide film!

Kawamura Industries' "KPI-MX300F" is a polyimide powder material that can dissolve in various solvents. The films obtained by dissolving in a solvent and then heating and drying have minimal coloring and high transparency, which is a significant feature. **Features of Kawamura Industries' "KPI-MX300F"** - Can dissolve in various solvents - Produces transparent, high-heat-resistant polyimide films - The resulting films have minimal coloring and high transparency *For property values, please refer to the PDF document or feel free to contact us.*

• Composite Materials
• Other polymer materials
• Organic Natural Materials

It is a heat-resistant laminated board that integrates polyimide film without adhesive.

Kawamura Industries' "Polyimide Laminate (PI-Plate)" is a laminate made by layering and thermally bonding polyimide film that has been activated on its surface through plasma treatment. **Features of Kawamura Industries' "Polyimide Laminate"** - Excellent heat resistance due to being adhesive-free → Continuous: 200°C / Short-term: 400°C - Exhibits excellent mechanical properties derived from polyimide film - Laminates can be produced in sizes up to 480mm x 1,100mm - Maximum thickness of 10mm (proven) *Please feel free to consult us regarding thicknesses over 10mm. *For examples of properties, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other polymer materials
• Other contract services

"5% weight reduction temperature is 534℃!" This is a stainless steel/polyimide substrate suitable for high-temperature planar heating heater applications, without the use of adhesives.

Kawamura Industries provides stainless steel/polyimide materials by leveraging the know-how of polyimide coating technology developed over many years on stainless steel foil. **Features of Kawamura Industries' "SUS/Polyimide Material"** - Excellent heat resistance due to being adhesive-free → 5% weight loss temperature (534°C) - High adhesion strength achieved through unique polyimide technology → Stainless steel/polyimide adhesion strength (2.4 kN/m) - Wide range of thickness options → Stainless steel thickness (15, 18, 20, 30, 50 μm) → Polyimide thickness (selectable between 5-25 μm) *For examples of properties, please refer to the PDF document or feel free to contact us.*

• stainless
• Composite Materials
• Other polymer materials

It can be combined with plasma pre-treatment, lamination, slitting, and other processes.

Kawamura Industries provides contract coating services for clean coatings. The cleanliness is managed at class 1,000 or below, and the coater area has a performance level of class 150 or below. 【Features of Kawamura Industries' 'Clean Coating'】 　■ High-temperature drying 　→ Max 260℃ 　■ Clean compatibility 　■ Can be combined with plasma pre-treatment, lamination, slitting, etc. *For the main specifications, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Surface treatment contract service
• Other contract services

This is a surface treatment technology that dramatically improves the adhesion of fluororesin films and polyimide films, which have been considered difficult to bond until now.

At Kawamura Industries, we apply plasma treatment to films, metal foils, non-woven fabrics, and more, performing surface modifications such as hydrophilization and hydrophobization. This treatment significantly improves the adhesion of various films and allows for the removal and purification of organic substances from the substrate surface. It can effectively remove residues such as rolling oils that are difficult to completely eliminate with wet cleaning. Additionally, it is possible to bond various materials together without the use of adhesives. **Features of Kawamura Industries' 'Vacuum Plasma Treatment'** - Dramatically improves adhesive strength - Effectively removes rolling oils and organic substances, purifying the surface - Enables adhesive-free bonding of various materials - Selects suitable gas types and plasma treatment conditions for each project - Treatment effects last for an extended period - Continuous processing is possible with roll-to-roll technology *For more details, please refer to the PDF document or feel free to contact us.*

• Surface treatment contract service

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

＼ Logistics Solutions Featured in "Logistics Special" ／ Starting today, our logistics solutions are featured in the "Logistics Special" section of Ipros Monozukuri. In this feature, we introduce challenges and considerations related to packaging and packing processes, as well as tips for on-site improvements. This content is useful for a wide range of individuals, from those in the information-gathering stage to those actively considering implementation. If you are considering a review or improvement of your packaging and packing processes, please take this opportunity to check it out. Furthermore! ＼ Significant Expansion of Product Pages ／ In conjunction with the feature in the Logistics Special, we have expanded the content of our product pages. To make it easier for customers to consider solutions tailored to their challenges and processes, we have organized the solution structures and related products and options. We encourage you to utilize this as concrete material for improving your packaging and packing processes. If you have any questions, please feel free to contact us. Thank you very much for your continued support.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.