Notice of the "Autumn Joint Fair" to be held from October 27 (Thursday) to October 29 (Saturday), 2022.

Easy, fast, high quality! High-frequency flash bonding machine that achieves excellent production efficiency.

"BONDEX" is a high-frequency flash adhesive machine that is easy to operate. Once the materials are prepared and set, just press a button to start the adhesion. With quick activation and simultaneous bonding of multiple items, production time can be significantly reduced. High-frequency bonding has a short press time, which minimizes the appearance of core material marks on the surface material. We have newly added the space-saving "BONDEX-V," which accommodates custom furniture and interior doors, and the high productivity "BONDEX-VX," which finishes interior doors with two presses. 【Features】 ■ Once the materials are prepared and set, just press a button to start the adhesion. ■ Easily change the setting conditions to meet the needs of small-batch production of various types. ■ Achieve speed bonding in just 30 seconds even when using woodworking glue. ■ Quick activation and simultaneous bonding of multiple items significantly reduce production time. ■ Since only the adhesive is heated by high frequency, deformation and warping are minimized. ■ High-frequency bonding has a short press time, making it less likely to leave core material marks on the surface material. *For more details, please refer to the PDF materials or feel free to contact us.

• Other processing machines

Easily, quickly, and with high quality. Our high-frequency technology guarantees it.

The "BONDEX-V" is a high-frequency flash bonding machine that can widely accommodate custom furniture and interior doors. In cold pressing, the curing time for flash panels takes several tens of minutes to several hours, making it impossible to move on to the next task immediately. However, with the "BONDEX-V," bonding of flash panels can be completed in just "30 seconds," leading to overwhelming productivity improvements. Additionally, because it heats with high frequency, it reduces material warping and eliminates core material marks, resulting in superior "finish quality." The new space-saving model "BONDEX-V" has been made more compact, with a depth of about 60 cm, due to the integration of the high-frequency oscillator and the main unit, as well as the miniaturization of high-frequency components (see the third photo). Also, with casters, it is easy to transport and move! The structure of the grid electrodes, which alternate between positive and negative electrodes, has been significantly improved, reducing maximum input by about 31% (compared to the conventional model BONDEX-8R), contributing to energy cost savings. *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

Can be used with a household power supply of 100V! The tip iron part can be easily exchanged with a one-touch gun.

This product is a lightweight, portable high-frequency compact heating adhesive machine that operates on a 100V power supply. It comes standard with an automatic tuning device, eliminating the need for troublesome adjustments. No preheating is required, so you can start heating work immediately after turning on the power. It can be used for edge bonding, fastening bonding, corner bonding, and for bonding wood, paper, and cardboard. 【Features】 ■ Usable with a household 100V power supply ■ The tip iron and gun can be exchanged with a single touch ■ No preheating required; you can start heating work immediately after turning on the power ■ Comes standard with an automatic tuning device, eliminating the need for troublesome adjustments *For more details, please refer to the PDF document or feel free to contact us.

• Wood processing machinery

Compatible with exterior wall materials from various manufacturers! Thanks to high frequency, it achieves easy, fast, and high-quality adhesive bonding for exterior wall corners!!

The "WALLEX-5VAD" is a high-frequency outer wall corner adhesive machine that requires fewer processes compared to natural curing, allowing for the effortless production of consistently high-quality products even without skilled workers. By applying pressure to the materials with an air cylinder while quickly and evenly heating the adhesive surface, bonding is completed in just about "45 seconds." It can accommodate short delivery orders and easily respond to custom production, while also eliminating the need for space for curing or jet heaters, contributing to space-saving in factories. 【Features】 ■ Start bonding in just 3 easy steps ■ Reduces the hassle of gluing and repairs ■ Complete bonding in just about 45 seconds ■ Supports short delivery times and custom production ■ Unique beauty of high-frequency bonding ■ High bonding strength and stable quality *For more details, please refer to the PDF document or feel free to contact us.

• glue

No thickness is required considering the machining process! After setting the heating schedule, it operates fully automatically until the end!

The "MP Series" is a high-frequency flat-panel heat treatment device that eliminates "twisting" during drying while allowing for the retention of thickness for commercialization. Since there is no need to consider machining allowance, it can be dried in a thin state. Once the heating schedule is set, it operates fully automatically until the end. Additionally, the moisture content becomes uniform, minimizing the return after processing. 【Features】 ■ Eliminates "twisting" during drying ■ Allows for commercialization while retaining thickness ■ Improves yield ■ Reduces drying costs ■ Fully automatic operation ■ Minimizes return *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.