New Catalog: 【Manga】Reduce Molding Defects with the Mold Cleaning Machine, Kripika Ace! Released.

Create cleaning test reports with fully equipped facilities! Would you like to clean molds in the cleaning test room of Somax Co., Ltd.?

Somax Corporation is currently conducting free demonstrations in our "Cleaning Test Room," where customers are invited to visit. 【Well-Equipped Test Room and Analysis Equipment】 In addition to our mold cleaning machine, the Cripica Ace, we offer a range of mold maintenance equipment, including: - Electron microscopes - Optical microscopes - Laser microscopes - X-ray analysis equipment and more, all equipped for analysis! We can conduct test cleaning with large cleaning machines and observe large-sized molds that cannot fit on a desk. The cleaning tests will be handled by experienced staff. Additionally, we will prepare a cleaning test report. You can apply for a free demonstration in the cleaning test room through our website. We also welcome inquiries just to hear more about our services! ▼ Request a free demo here https://www.somax.co.jp/demonstration/form/ For more details, please check our catalog, which is available for free download. Feel free to contact us!

• Other molds
• Other cleaning machines
• Ultrasonic Cleaner

Representatives from each area will provide demo units for free anywhere in Japan. Online demos are also available for free!

In response to customer requests such as "I want to try it out!" and "I want to test it in-house!", we are currently offering free demonstrations nationwide where you can try the products you desire! We have prepared three methods for you, so please take this opportunity to experience the exceptional cleaning power with your company's molds! 【1】 Nationwide On-Site Demo A free on-site demonstration where we visit anywhere in Japan with the actual equipment. 【2】 Online Demo A service that provides product introductions and operational explanations via the internet for customers who find it difficult to conduct face-to-face demonstrations. 【3】 Demo in the Cleaning Test Room A demonstration conducted in our "Cleaning Test Room," which includes a measurement and analysis room, where customers can visit our facility. Please feel free to contact us for demonstrations or to request catalogs!

• Plastic Mould
• Resin mold
• Mold Design

The "CPV" type has been introduced in the "CLIPIKA ACE" series of mold cleaning machines! In addition to the cleaning power of the "CPIII" series, it also supports diversity!

The CPV model has been newly introduced to the CLIPIKA ACE series of mold cleaning machines! Building on the proven cleaning power and performance of the CPIII series, it offers: ●Automatic lifting and lowering of the cleaning basket ●A flip-up type plus electrode ●And other new functions designed to meet diverse needs With these enhanced features, the physical burden during mold maintenance is significantly reduced. This enables mold maintenance that is accessible to people of all ages and genders. For everyone aiming to automate and improve the efficiency of mold cleaning: CLIPIKA ACE overturns the conventional belief that “mold maintenance requires skilled techniques” and “it is time-consuming and difficult.” 【Features of the CLIPIKA ACE Mold Cleaning Machine】 ●Automatically cleans molds placed in a dedicated basket ●Cleans multiple mold components simultaneously ●Cleaning solution penetrates every corner of the mold, thoroughly removing contaminants ●Does not damage the mold ●Uses no organic solvents

• Other cleaning machines
• Ultrasonic Cleaner

Wash multiple mold parts at once! Safe and secure mold cleaning without using organic solvents! Free comic materials on the dangers of organic solvents.

Using a mold cleaning spray that contains harmful "organic solvents," each mold part is maintained by hand one by one. ↓ With the safe and secure mold cleaning machine, Kuripika Ace, you can wash multiple mold parts at once! This reduces maintenance time! 【Conventional Mold Maintenance】 ● Very labor-intensive due to manual work ● Time-consuming and lacking manpower ● There are areas like the inner corners of molds that are hard to reach ● Hand polishing can cause scratches on the molds ● Concern about the burden on the body due to the use of organic solvents 【Mold Cleaning Machine 'Kuripika Ace'】 〇 Automatically cleans molds arranged in a dedicated basket 〇 Cleans multiple molds at once 〇 Cleaning solution penetrates every corner of the mold and removes dirt 〇 Dirt is lifted and removed, causing no damage to the mold 〇 Uses a water-based cleaning solution with low environmental impact and contains no organic solvents We offer a lineup tailored to the size of the molds. *For details, please see "Lineup." : We have uploaded a comic about the dangers of organic solvents:

• Other cleaning machines

The mold cleaning machine, Kuripika Ace, solves problems such as stubborn dirt on molds and time consumption. Here are the voices of joy from users who have implemented it!

The mold cleaning machine "Kuripika Ace" is a cleaning device that quickly cleans and removes mold dirt that could not be removed by traditional methods using mold cleaning spray and wiping. 【Features】 - Cleans multiple mold parts in a short time. - Removes gas burns and resin dirt such as PPS and POM without damage to the mold. - Compatible with textured molds. - Does not use organic solvents. 【Examples of Achievements】 - Mold dirt such as gas burns, resin residues, rubber residues, oxide films, and light rust that were previously thought impossible to clean have been successfully removed. - Reduced mold maintenance time. - Extended mold lifespan. - Reduced molding defects. - Molds in storage are less prone to corrosion, enabling preventive maintenance. The catalog "New Mold Cleaning Machine Kuripika Ace Customer Voices" includes excerpts of many positive comments from Kuripika Ace users. Some examples include cases where residues that could not be removed by ultrasonic cleaners were eliminated, significant increases in molding shot counts, and unexpected benefits resulting from changing mold cleaning methods! This is a must-see for those struggling with mold maintenance! The catalog is available for free download. Please take a look at the achievements of Kuripika Ace!

• Resin mold
• Injection Molding Machine
• Ultrasonic Cleaner

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.