New catalog 【Manga】 Released: Increase molding shot count with the mold cleaning machine, Kuripika Ace!

Create cleaning test reports with fully equipped facilities! Would you like to clean molds in the cleaning test room of Somax Co., Ltd.?

Somax Corporation is currently conducting free demonstrations in our "Cleaning Test Room," where customers are invited to visit. 【Well-Equipped Test Room and Analysis Equipment】 In addition to our mold cleaning machine, the Cripica Ace, we offer a range of mold maintenance equipment, including: - Electron microscopes - Optical microscopes - Laser microscopes - X-ray analysis equipment and more, all equipped for analysis! We can conduct test cleaning with large cleaning machines and observe large-sized molds that cannot fit on a desk. The cleaning tests will be handled by experienced staff. Additionally, we will prepare a cleaning test report. You can apply for a free demonstration in the cleaning test room through our website. We also welcome inquiries just to hear more about our services! ▼ Request a free demo here https://www.somax.co.jp/demonstration/form/ For more details, please check our catalog, which is available for free download. Feel free to contact us!

• Other molds
• Other cleaning machines
• Ultrasonic Cleaner

Representatives from each area will provide demo units for free anywhere in Japan. Online demos are also available for free!

In response to customer requests such as "I want to try it out!" and "I want to test it in-house!", we are currently offering free demonstrations nationwide where you can try the products you desire! We have prepared three methods for you, so please take this opportunity to experience the exceptional cleaning power with your company's molds! 【1】 Nationwide On-Site Demo A free on-site demonstration where we visit anywhere in Japan with the actual equipment. 【2】 Online Demo A service that provides product introductions and operational explanations via the internet for customers who find it difficult to conduct face-to-face demonstrations. 【3】 Demo in the Cleaning Test Room A demonstration conducted in our "Cleaning Test Room," which includes a measurement and analysis room, where customers can visit our facility. Please feel free to contact us for demonstrations or to request catalogs!

• Plastic Mould
• Resin mold
• Mold Design

The "CPV" type has been introduced in the "Kuripika Ace" series of mold cleaning machines! In addition to the cleaning power of the "CPIII" series, it also supports diversity!

The "CPV" type has been introduced in the "Kuripika Ace" series of mold cleaning machines! In addition to the cleaning power and capabilities of the "CPIII" series, it features: ● Automatic lifting and lowering of the cleaning basket ● Flip-up type plus electrode, and more New functions that accommodate diversity! With the addition of new features, the physical burden during mold maintenance is significantly reduced. It enables mold maintenance that is accessible to people of all ages and genders. To everyone aiming for the automation and efficiency of mold cleaning: We will overturn the common notions that "mold maintenance requires skilled techniques" and "it takes time and is difficult." 【Features of the Kuripika Ace Mold Cleaning Machine】 - Automatically cleans molds arranged in a dedicated basket - Cleans multiple mold parts at once - Cleaning solution penetrates every corner of the mold, perfectly removing dirt - No damage to the mold - No organic solvents used

• Other cleaning machines
• Ultrasonic Cleaner

Wash multiple mold parts at once! Safe and secure mold cleaning without using organic solvents! Free comic materials on the dangers of organic solvents.

Using a mold cleaning spray that contains harmful "organic solvents," each mold part is maintained by hand one by one. ↓ With the safe and secure mold cleaning machine, Kuripika Ace, you can wash multiple mold parts at once! This reduces maintenance time! 【Conventional Mold Maintenance】 ● Very labor-intensive due to manual work ● Time-consuming and lacking manpower ● There are areas like the inner corners of molds that are hard to reach ● Hand polishing can cause scratches on the molds ● Concern about the burden on the body due to the use of organic solvents 【Mold Cleaning Machine 'Kuripika Ace'】 〇 Automatically cleans molds arranged in a dedicated basket 〇 Cleans multiple molds at once 〇 Cleaning solution penetrates every corner of the mold and removes dirt 〇 Dirt is lifted and removed, causing no damage to the mold 〇 Uses a water-based cleaning solution with low environmental impact and contains no organic solvents We offer a lineup tailored to the size of the molds. *For details, please see "Lineup." : We have uploaded a comic about the dangers of organic solvents:

• Other cleaning machines

The mold cleaning machine, Kuripika Ace, solves problems such as stubborn dirt on molds and time consumption. Here are the voices of joy from users who have implemented it!

The mold cleaning machine "Kuripika Ace" is a cleaning device that quickly cleans and removes mold dirt that could not be removed by traditional methods using mold cleaning spray and wiping. 【Features】 - Cleans multiple mold parts in a short time. - Removes gas burns and resin dirt such as PPS and POM without damage to the mold. - Compatible with textured molds. - Does not use organic solvents. 【Examples of Achievements】 - Mold dirt such as gas burns, resin residues, rubber residues, oxide films, and light rust that were previously thought impossible to clean have been successfully removed. - Reduced mold maintenance time. - Extended mold lifespan. - Reduced molding defects. - Molds in storage are less prone to corrosion, enabling preventive maintenance. The catalog "New Mold Cleaning Machine Kuripika Ace Customer Voices" includes excerpts of many positive comments from Kuripika Ace users. Some examples include cases where residues that could not be removed by ultrasonic cleaners were eliminated, significant increases in molding shot counts, and unexpected benefits resulting from changing mold cleaning methods! This is a must-see for those struggling with mold maintenance! The catalog is available for free download. Please take a look at the achievements of Kuripika Ace!

• Resin mold
• Injection Molding Machine
• Ultrasonic Cleaner

The "240well 2D Code Attached Tube" is a product with a 200μl type and a rack lid lock function. It is compatible with liquid nitrogen vapor. It allows for the storage and management of a large number of samples in a small space, making it easier to understand. Additionally, it does not use sealing materials, which improves sealability and allows for safer use. 【Features】 ■ Developed a 2D code attached tube for ultra-micro volumes (200μl) ■ Compatible with liquid nitrogen vapor ■ Adopts a new type of screw cap that does not use O-rings, packing, or gaskets ■ Improved sealability and safer use due to the absence of sealing materials *For more details, please download the PDF or feel free to contact us.

Yoshikawa Co., Ltd. Realization Division will exhibit at the 40th Nepcon Japan. ■ Dates: January 21 (Wed) - 23 (Fri), 2025 ■ Venue: Tokyo Big Sight ■ Booth: East Hall 4 E6-19 Clean and Static Control Zone The exhibit will feature a storage shelf for slide-type metal masks. 【Efficient storage with a sliding mechanism】 【Easy to take out even while wearing gloves】 【Customization to meet the needs of individual customers】 We invite you to come and see it. ■ Pre-registration (free) is available here or through related links: https://www.nepconjapan.jp/tokyo/ja-jp/register.html?code=1522511758302164-EUA

We would like to introduce "Stability 2" handled by FCR and Bio Co., Ltd. This product is a jacket tube with a rack lid lock and anti-rotation function (compatible capacity 2.1ml). Additionally, for products equipped with the rack ID function, a 2D code for rack ID is provided on the bottom surface of the rack, allowing simultaneous reading of the tube ID (bottom surface 2D code) and rack ID within the rack, thereby reducing stress on samples during the reading process. 【Features】 ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Compatible with liquid nitrogen vapor *For more details, please download the PDF or feel free to contact us.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

What is an Air Leak Tester? An "Air Leak Tester" is a device that pressurizes the inside (or outside) of a sealed workpiece with air and determines the presence of leaks based on pressure changes. When a master with no leaks and a workpiece with leaks are pressurized, the pressure on the workpiece side decreases, creating a pressure difference between the two. By measuring this pressure difference, the presence of leaks can be determined. Generally, differential pressure air leak testing is widely used, but Fukuda also offers products that utilize direct pressure leak testing and flow meters according to the leak rate, in addition to differential pressure leak testers. Since the air leak tester uses air as the measurement medium, it incurs no running costs and is environmentally friendly.