We have released an interview video featuring Yamada employees about the "Seven Challenges."

We are currently offering a catalog introducing over 150 basic models of air-driven diaphragm pumps with intrinsic safety explosion-proof specifications.

From the ultra-compact model series 5, which is palm-sized, to the large series 80, we offer a total of 9 types, with 9 types of wetted materials and 7 types of diaphragm materials, providing over 150 basic models. It is possible to select models suitable for the usage conditions, and it can also transfer flammable liquids and liquids with abrasive elements. 【Features】 ■ Powered by compressed air, making it safe and eliminating the need for explosion-proof measures ■ Capable of transferring slurry liquids (liquids with solids and high abrasiveness) ■ Discharge volume can be adjusted and stopped by operating the air regulator ■ Fully self-priming, so no priming water is required ■ No mechanical seals, eliminating concerns about liquid leakage or failures due to dry running ■ Simple structure makes maintenance easy, and after-sales service is thorough. Fewer parts make maintenance straightforward. Equipped with a reset button to reduce downtime. 【Examples of Applications】 Recovery of waste liquids/sludge, transfer of factory wastewater, transfer of alcohol/ethanol, transfer of lubricants and hydraulic oils, paint supply to roll coaters, supply to filter presses. *For more details, please download the PDF or contact us. You can view the digest version from the 【Catalog Download】.

• Other pumps

High discharge volume! Air-driven diaphragm pump capable of transporting flammable liquids and solids.

The "NDP-40/50/80 series" is a large air-driven diaphragm pump that is ideal for various applications, such as oil plants and ceramic factories. [Main Industries] Chemical plants, ceramic factories, oil plants, chemical factories, and marine applications. [Diameter and Maximum Discharge Rate Reference*] NDP-40 Series Diameter 1-1/2" (40A), Maximum discharge rate approximately 400L/min NDP-50 Series Diameter 2" (50A), Maximum discharge rate approximately 600L/min NDP-80 Series Diameter 3" (80A), Maximum discharge rate approximately 800L/min *Values may vary depending on the wetted parts and diaphragm material. The maximum discharge rate indicates the pump's capacity. Please refer to the catalog for the actual flow rate range for your usage. For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other pumps

A diaphragm pump made of PTFE resin that allows for the large supply of strong acids, strong alkalis, and other chemical solutions! Flow rate can be adjusted with a regulator, making it easy to operate.

The BTT series is a diaphragm pump designed for chemical applications, utilizing fluororesin in all wetted parts. It employs highly corrosion-resistant PTFE resin, enabling the large-scale supply of strong acids, strong alkalis, and other chemical liquids. It operates on compressed air and is designed to be intrinsically explosion-proof, ensuring safe use. Features: - The body and diaphragm materials are made of fluororesin (PTFE)! - Since fluororesin is used in all wetted parts, it allows for the transfer of strong acids and strong alkalis. - High performance with a discharge rate of 125L/min! (NDP-P25BTT) * The discharge rate is only a guideline and may vary depending on the operating conditions of the diaphragm pump. For more details, please contact us or download the catalog.

• Other pumps

No need for motorized dust collectors or large equipment! A diaphragm pump designed for powder applications utilizing Yamada's know-how ★ Compact, lightweight, and easy to maintain.

Features of Yamada's Powder Transfer Pump ■ Since it is an air-driven pump, the power source is only compressed air ■ No electrical work is required, simplifying the equipment and enabling low-cost installation ■ Compact and lightweight, making it easy to transport and space-saving ■ Minimal separation phenomena due to differences in powder density ■ Fewer parts, making disassembly and assembly easy ■ Flow control is simple with an air regulator Models are available that can handle a transfer volume of 200kg to 1500kg per hour ■ Transfer volume guidelines ・NDP-25 series: approximately 200kg/h ・NDP-40 series: approximately 500kg/h ・NDP-50 series: approximately 1,000kg/h ・NDP-80 series: approximately 1,500kg/h ■ Examples of transferable powders ⇒ Toner, powder coatings, aerosols, silica, glass bubbles, calcium carbonate, carbon black, pesticides, medical powders, kaolin, etc. *The capacity may vary depending on the powder being transferred, so confirmation with a demo unit is necessary. Please consult us if you are considering improvements to your work environment or work efficiency.

• Other pumps

The pump material is cast SUS316 compliant with FDA and CFR Title 21. It adheres to regulations regarding food and pharmaceutical standards.

* CFR (Code of Federal Regulations Title 32): Title 21 of the U.S. Federal Regulations. Regulations concerning food and pharmaceuticals. The "Saniforce" series is an air-driven sanitary pump ideal for transferring food ingredients. **Features** - Simple structure for easy maintenance The air switch valve has a simple structure with only 9 parts. - No tools required for assembly and disassembly! Easy maintenance The structure of the suction and discharge ports uses a hygienic clamp connection, allowing for quick and easy disassembly and assembly. - Cast SUS316, with sanitary polishing on contact parts The pump material is cast SUS316 compliant with FDA and CFR Title 21, and the contact parts are finished with sanitary polishing (Ra3.2), preventing residue buildup and making cleaning easy. **Main transfer materials** Concentrated fruit juice, sauces/pastes/starches, wine, jam, edible oil. * For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

In civil engineering sites such as mountainous areas and construction sites, it may be necessary to use wooden boards on slopes or inclined access roads. Hyper CLT boards are civil engineering materials utilizing wood CLT, which can be laid not only on flat ground but also on sloped terrain. They can be used for temporary roads, access routes, heavy machinery entry paths, and measures against muddy conditions, creating a driving environment that takes advantage of the unique surface characteristics of wood. The 5×10 board weighs approximately 230 kg, and the 5×20 board weighs about 460 kg, making them lightweight and easy to install and remove even with small machinery, which is a notable feature for maneuverability in narrow sites. This wooden board is registered as a technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system as "TH-250021-A," and can also be utilized for safety measures and innovative ideas in public works.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.