Free trial! On-site demo campaign for drain processing!

It is easy to confirm the clear water of the treated water! The drainage is pumped by the drainage pressure of the electromagnetic drain trap.

The "Drain Destroyer XSD Type" is an all-in-one drain processing machine that does not have a specific gravity separation tank. It features easy maintenance, space-saving design, and zero waste, making it a perfect match for current compressors that discharge drains via solenoid valves with low oil consumption. This is a completely hassle-free series that performs all processing steps with a single filter. 【Features】 ■ Large processing capacity and low processing costs ■ Equipped with a large clean water confirmation tank ■ Includes a drain separation tank at the bottom of the XSD tank ■ No power supply required ■ Very simple structure with minimal risk of failure *For more details, please refer to the PDF materials or feel free to contact us.

• Hazardous material processing

Large processing capacity and low processing costs! Drainage processing using a natural drop method with a non-powered device.

The "Dren Destroyer PSD Type" is a drain treatment device specifically designed for air compressors with consideration for the environment. It was developed for the local treatment of small compressors and piping drains, adopting a natural drop method that requires no power, and it is also possible to manually input drains generated from other locations. Its very simple structure means that it rarely malfunctions. 【Features】 ■ Large processing capacity and low processing costs ■ No power supply required ■ Since 1981, it has been processing emulsions (emulsified oils) using only a special filter ■ No sludge generation, so no manual labor is required at all ■ Capable of adsorbing and recovering CO2 contained in the drain *For more details, please refer to the PDF document or feel free to contact us.

• Oil-water separator

For advanced compressors with reduced oil consumption! Excellent overall performance.

The "Drain Destroyer LSD Type" is a dedicated drain treatment device for air compressors that is environmentally friendly. Designed for advanced compressors with reduced oil consumption, this series features a slimmed-down drain separation tank and LAB tank filter, improving maintenance and reducing costs. It excels in overall performance. 【Features】 ■ Slimmed-down drain separation tank and LAB tank filter ■ Improved maintenance and cost reduction ■ No power supply required ■ Applicable compressors: 55kW, 110kW, 165kW ■ Capable of adsorbing and recovering CO2 contained in the drain *For more details, please refer to the PDF materials or feel free to contact us.

• Oil-water separator

Compatible with old model compressors' drains! Establishing power-free processing using the discharge capacity of the Super Trap.

The "Drain Destroyer SD Model" is a product designed for drain processing in compressor rooms of medium size or smaller, as well as for standalone medium and large compressors. Equipped with a drain separation tank and a robust AB tank filter, it can handle the drains from reciprocating machines and older model compressors. Utilizing the discharge power of the super trap, it has established a power-free processing method and is an overwhelmingly best-selling series. 【Product Lineup】 ■ SD37D Model ■ SD75C Model ■ SD150C Model ■ SD220C Model *For more details, please refer to the PDF materials or feel free to contact us.

• Oil-water separator

Utilize existing customer pits effectively! Self-priming drain processing machine with built-in pump.

The "Dren Destroyer ADP/ADPL type" is a product suitable for drain processing in large compressor rooms. It is a versatile type that can handle high-concentration, strongly emulsified drains by combining it with large-volume drain separation tanks and oil flotation systems. Additionally, unlike other models, it features a built-in self-priming pump, allowing for effective use of existing customer pits. 【Features】 ■ Designed for drain processing in large compressor rooms ■ Versatile type ■ Applicable compressors: 220kW, 440kW, 660kW, 880kW, 1100kW ■ Capable of adsorbing and recovering CO2 contained in the drain *For more details, please refer to the PDF document or feel free to contact us.

• Oil-water separator

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall