Learning MIPI CSI-2 (Video Introduction) Mobile Industry Processor Interface Camera Serial Interface-2

An online seminar that is helpful for not only science and engineering students and new engineers but also veteran engineers, providing insights that are "eye-opening."

RIGOL Online Seminar https://jpmall.rigol.com/ (Seminar videos available from the middle section onward) Session 1: The Role Distribution of Digital Multimeters and Oscilloscopes Session 2: How to Choose an Oscilloscope with What Frequency Bandwidth in MHz Session 3: Measurement Starts with Probe Preparation Session 4: The Mechanism of Probes Session 5: How to Determine Voltage Sensitivity to Maximize Performance Session 6: How to Determine Time Settings to Maximize Performance - The Impact of Sample Rate

• oscilloscope

Mixed Signal Oscilloscope MSO5000 Series with Excellent Cost Performance

The MSO5000 series digital oscilloscope is a high-performance and economical digital oscilloscope of the UltraVision II technology generation. Equipped with class-leading sampling and memory length, it features a self-developed chipset that enables high-functionality measurements as a mixed signal oscilloscope. ■ Frequency bandwidth: 70 / 100 / 200 / 350 MHz Sampling rate: Up to 8G samples/second Memory length: Up to 200M points Waveform capture rate: 500,000 wfms/s ■ Serial bus trigger & decode standard equipped ■ Integration of seven types of measurement instruments into one ■ Comfortable operation and confirmation possible with a 9-inch touchscreen *For more details, please refer to the PDF document or feel free to contact us.

• oscilloscope

A budget model with rich features while emphasizing performance. An ideal device for education, electronics projects, embedded design, and power analysis.

■ Frequency range: 50 / 70 / 100 MHz, Sampling rate: up to 1G samples/second, Memory length: up to 24M points ■ Standard equipped with serial bus trigger & decode ■ Built-in 25MHz signal generator (optional) ■ Hardware waveform recording & replay ■ Price: 51,800 yen ~ *For more details, please refer to the PDF document or feel free to contact us.

• oscilloscope

High-performance mixed signal oscilloscope of the Ultra Vision II technology generation.

Equipped with class-leading sampling and memory length, this high-performance mixed signal oscilloscope, featuring a self-developed chipset, is ideal for embedded design, power analysis, serial decoding, and RF applications. ■ Frequency range: 100 / 200 / 350 / 500 MHz, Sampling rate: up to 10G samples/second, Memory length: up to 500M points, Waveform capture rate: 600,000 wfms/s ■ Standard equipped with serial bus trigger & decode ■ Integrates seven types of measurement instruments into one ■ Comfortable operation and confirmation possible with a 10.1-inch touchscreen *For more details, please refer to the PDF document or feel free to contact us.

• oscilloscope

(Limited model campaign until the end of June) High-performance mixed signal oscilloscope of the UltraVision II technology generation.

A high-performance mixed signal oscilloscope equipped with a self-developed chipset featuring class-leading sampling and memory length, suitable for embedded design, power analysis, serial decoding, RF applications, jitter and eye pattern analysis, and more. - Frequency range: 600MHz / 1GHz / 2GHz - Sampling rate: up to 10G samples/second, memory length: up to 500M points, waveform capture rate: 600,000 wfms/s - Standard equipped with serial bus trigger & decode - Eye pattern analysis included - Integrates seven types of measurement instruments into one - Comfortable operation and confirmation possible with a 10.1-inch touchscreen * For more details, please refer to the PDF document or feel free to contact us. Until the end of June, we are running a free upgrade campaign for the MSO8064 model from 600MHz to 1GHz. For campaign details, demo units, or quotes, please contact us at the email below. Email: liangpeng@rigol.com

• oscilloscope

Oscilloscope MSO/DS2000A Series

The MSO/DS2000A series digital oscilloscope is a versatile digital oscilloscope equipped with a frequency bandwidth of 100MHz to 300MHz, a maximum sampling rate of 2G samples/s, deep memory length, and a high waveform capture rate.

• oscilloscope

Equipped with the in-house developed chipset "Centaurus"! All models support 12-bit standard.

The "HDO1000 series" is a digital oscilloscope with frequency bandwidths of 70MHz, 100MHz, and 200MHz. It has 4 or 2 analog channels, with a maximum sampling rate of 1GSa/s. Additionally, it features a vertical resolution of 12 bits and includes five types of serial decoding functions. 【Features】 ■ 4 or 2 analog channels ■ Maximum sampling rate: 1GSa/s ■ Vertical resolution: 12 bits ■ Vertical axis range: 500μV/Div to 10V/Div *For more details, please refer to the PDF document or feel free to contact us.

• oscilloscope

Ultra-low noise floor of 18μVrms (typical value)! Frequency bands of 200MHz, 400MHz, and 800MHz.

The "HDO4000 Series" is a digital oscilloscope equipped with the self-developed chipset "Centaurus." All models support a standard of 12 bits, with an ultra-low noise floor of 18μVrms (typical value). Additionally, the interfaces include USB, LAN, and HDMI, with frequency bandwidths of 200MHz, 400MHz, and 800MHz. 【Features】 ■ 4 analog channels ■ Maximum sampling rate: 4GSa/s ■ Vertical resolution: 12bit ■ Vertical axis range: 100μV/Div to 10V/Div (1MΩ) *For more details, please refer to the PDF document or feel free to contact us.

• oscilloscope

In projects directly managed by the Ministry of Land, Infrastructure, Transport and Tourism, the use of new technologies is generally required. Therefore, in future civil engineering sites, it is important not only to consider "whether to use new technologies," but also how to select and utilize technologies that are suitable for the site. One of those options is the "Hyper CLT Board," a wooden lightweight mat that utilizes CLT. It can be used as a wooden mat for temporary roads, access routes, and heavy machinery work yards, and the 5×10 board weighs approximately 230 kg, making it relatively lightweight. In addition to ease of installation, removal, and relocation, it features suppression of glare and metallic sounds, as well as environmental considerations through the use of wood. Furthermore, it can be incorporated into proposals for the utilization of new technologies as a **NETIS registered technology by the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** NETIS, new technologies, civil engineering, CLT. As public works change, the Hyper CLT Board offers a new option of wooden lightweight mats to the site.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Features: ● Equipped with Intel N series processors (N250/N150) ● Fanless design ● Ultra-thin compact chassis (30mm thick) ● Supports DDR5 memory ● Dual display output ● Dual Gigabit LAN ● Abundant M.2 expansion slots ● Equipped with TPM 2.0 * This model comes without memory, storage, and OS.