■■ Air Leak Tester | FLA-0200 / FLA-0201 series ■■ Fukuda's new flagship model. Equipped with mastering correction function, it enables high-precision measurements in a short time.

A masterless air leak tester that does not require an external reference during measurement. It measures the differential pressure between the workpiece and the built-in master tank.

This is a masterless air leak tester that does not require an external reference during measurement. It performs differential pressure measurements using an integrated master tank. Since there is no variation in the built-in master itself, stable measurements can always be achieved. Furthermore, this is our top-of-the-line model of the masterless leak tester, which also realizes a reduction in measurement time through mastering measurements. ● Equipped with preventive maintenance functions ● Mastering correction function ● Self-diagnosis function ● 5.7-inch touch panel display ● Network communication compatible (optional)

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other inspection equipment and devices

A versatile air leak tester that can flexibly adapt to various measurement environments. It is Fukuda's flagship model.

A versatile air leak tester that can flexibly accommodate various measurement methods (comparison between workpieces, comparison between workpieces and masters, comparison between workpieces and fixed masters (masterless)) and measurement environments. With a rich lineup of nine types that can handle high pressure, it allows for high-precision measurements in a short time through mastering measurement, making it Fukuda's flagship model. The masterless differential pressure air leak tester 'FLA-0200 series' is also available. ● Equipped with preventive maintenance functions ● Mastering correction function ● Self-diagnosis function ● 5.7-inch touch panel display ● Network communication compatible (optional) *Please contact us if you require a test pressure of 1 MPa or higher.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other inspection equipment and devices

Waterproof testing for home appliances. Masterless air leak tester that does not require external comparison.

In the home appliance industry, waterproof testing is essential to ensure product reliability. Moisture intrusion can lead to product failure or performance degradation. Particularly for products intended for outdoor use or those designed for use around water, high waterproof performance is required. Our masterless differential pressure air leak tester utilizes a built-in master tank to measure the differential pressure with the workpiece, achieving stable leak testing. 【Application Scenarios】 - Waterproof testing for smartphones, smartwatches, etc. - Airtight testing for home appliances like washing machines and refrigerators - Waterproof performance evaluation for products used outdoors 【Benefits of Implementation】 - Improved product quality - Reduction of defective products - Increased customer satisfaction

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other inspection equipment and devices

No need for external comparison! Achieve stable measurements and time reduction with the built-in master.

In the automotive industry, the airtightness of various components such as engines and fuel cell parts affects product quality. Particularly for parts used in harsh environments, even minor leaks can lead to performance degradation or failure. The FLA-0200 achieves reliable airtight testing through stable differential pressure measurement with a built-in master tank. 【Application Scenarios】 - Airtight testing of engine components - Airtight testing of fuel cell components - Airtight testing of valves and piping 【Benefits of Implementation】 - Improved quality through stable measurements - Reduced inspection time through mastering measurements - Lower running costs (using air)

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other inspection equipment and devices

This is a peripheral device for the air leak tester. It is used when replacing old models with current products or when changing the model of current products.

It is easy to replace products with other products. Replacing the product is a simple task of unplugging the connector from the current tester and plugging it into this product. It can be easily installed without the need for rewiring.

• Other cable related products
• Other measurement, recording and measuring instruments
• Leak Testing Equipment

Control pressure freely with voltage control! A wide range of options from low flow to high flow.

The "APU series" is a pneumatic regulator that instantaneously controls pressure and flow based on feedback from an external pressure sensor. Control reproducibility: ±0.1% Response time: 0.5 s *Reference value depending on usage conditions You can choose from a wide variety of options tailored to the required flow rate and pressure, including the "APU-508W," "APU-520W," and "APU-70W." 【Features】 ■ Continuously controls pressure and flow through voltage control ■ Allows monitoring of pressure just before the workpiece using an external pressure sensor ■ External pressure sensor enables ΔP control and constant differential pressure control ■ A wide lineup from small flow rates to large flow rates ■ Can be selected from positive pressure, negative pressure, and compound pressure depending on the application *For more details, please refer to the PDF document or feel free to contact us.

• Leak Testing Equipment
• Flow Control
• Pressure Control

CLT, which has been utilized in the field of architecture, is now expanding its possibilities into civil engineering sites. The "Hyper CLT Mats" are wooden lightweight mats that utilize CLT. They can be used as wooden mats for temporary roads, access routes, heavy machinery work yards, and material storage areas, providing an alternative to traditional steel plates on site. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds, as well as CO2 fixation, thanks to its wooden composition. Moreover, the Hyper CLT Mats are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology "TH-250021-A," making them eligible for proposals in the use of new technologies in public works. Transforming CLT from "building material" to "civil engineering material," it is expanding the new possibilities of civil engineering CLT in the form of wooden lightweight mats.

The power system is transitioning from DC12V / DC24V systems to DC48V systems. Therefore, we have launched the "48V Special Feature" page! On this special feature page, we will provide information useful for customers considering DC48V systems, including an introduction to products compatible with DC48V, the advantages and disadvantages of transitioning to a DC48V system, and related information that can assist in system construction. If you have any of the following concerns: "I am looking for products compatible with DC48V" "I am considering transitioning from DC12V / DC24V" "I want to know more about DC48V systems" Please take a look at the "48V Special Feature"! If you have any questions regarding product selection or specifications, please feel free to contact us through our website.

We handle TFT LCD modules from WINSTAR for use in display sections of devices. 【We receive inquiries in the following situations】 - Wanting to update the display section of measuring instruments or control panels - Looking for LCDs to incorporate into industrial equipment - Searching for a supplier that can accommodate small quantities 【We can assist with】 - Selecting sizes and interfaces that meet application and enclosure conditions - Confirming pin assignments and arranging samples - Developing custom products and embedded systems - Selling in small lots We also handle OLED (organic EL) modules from the same WINSTAR company. Please consider these as well for devices that want to take advantage of their thinness, low power consumption, and wide viewing angles. Please check the specific specifications in the manufacturer's datasheet. We also accept requests for quotes only.

CLT is known as a building material, but its applications are not limited to just buildings. The wooden lightweight mat "Hyper CLT Mat" is a new option for utilizing CLT in civil engineering. It can be used as a wooden mat in places where steel plates have been the norm, such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 mat is relatively light at about 230 kg, making it easy to install, remove, and relocate. Additionally, it offers different values compared to steel, such as reducing glare and metallic noise, as well as CO2 fixation through wood. Moreover, the Hyper CLT Mat is registered with the Ministry of Land, Infrastructure, Transport and Tourism as a NETIS technology "TH-250021-A." It can also be utilized for proposals involving the use of new technologies and environmental considerations in public works. From construction to civil engineering, the new use of wood is expanding in the form of wooden lightweight mats.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.