フクダ List of News Articles

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

What is a sealed product air leak test device? It is an air leak test device that inspects the airtightness, sealing performance, and waterproofness of electrical equipment and packaging containers (cosmetics, food). It tests for leaks in products such as smartphones, tablet devices, keyless switches, wristwatches, bottle containers, and cosmetic containers (eyeliner, mascara).

What is an Air Leak Tester? An "Air Leak Tester" is a device that pressurizes the inside (or outside) of a sealed workpiece with air and determines the presence of leaks based on pressure changes. When a master with no leaks and a workpiece with leaks are pressurized, the pressure on the workpiece side decreases, creating a pressure difference between the two. By measuring this pressure difference, the presence of leaks can be determined. Generally, differential pressure air leak testing is widely used, but Fukuda also offers products that utilize direct pressure leak testing and flow meters according to the leak rate, in addition to differential pressure leak testers. Since the air leak tester uses air as the measurement medium, it incurs no running costs and is environmentally friendly.

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

● What is a hydrogen leak detector? It can measure leaks in small areas that could not be detected in air leak tests and can also identify the leak locations. It is a detector that uses a mixture of 5% hydrogen and 95% nitrogen (non-flammable gas: ISO10156:2017) as the tracer gas. ● What is a helium leak test system? It is a leak test system suitable for high-precision or high-pressure leak inspections. The helium leak test system uses helium gas as the detection gas (tracer gas) and detects the helium that has leaked out. It is the leak test method among Fukuda's leak testers that can detect the smallest leaks.

The 【 HDA-0100 series 】 currently available from Fukuda Corporation is a "Portable Hydrogen Leak Detector." ■ Compact and lightweight, convenient for carrying (approximately 400 g, including battery) ■ Battery-operated and cordless (continuous usage time of approximately 8 hours) ■ High sensitivity and wide range (0.5 ppm to 5000 ppm) hydrogen measurement is possible in a handy type It has features such as these. "What is a Hydrogen Leak Detector?" It is a tester that can measure leaks in small areas that could not be measured in air leak tests and can also identify leak points. It uses a tracer gas consisting of 5% hydrogen and 95% nitrogen, an industrial mixed gas (non-flammable gas: ISO10156:2017). For more details, please refer to the links below for related links, product information, and catalogs.

The HDZ-0201 is a hydrogen leak detector designed for installation in equipment. It is used to measure the overall leakage from the entire inspected item (workpiece). - The atmospheric pressure chamber method involves covering the workpiece with a chamber, filling the inside of the workpiece with tracer gas, allowing the leaked gas to accumulate in the chamber, stirring the leaked gas, and forcing circulation to measure the gas concentration with a hydrogen detector. - The vacuum chamber method allows for high-sensitivity measurements by evacuating the chamber and then introducing atmospheric air into the chamber, directing the gas to the hydrogen detector. There are two methods available. It features a compact and lightweight design that is easy to integrate into equipment. Additionally, its concentration resolution capability is ultra-high sensitivity up to 0.1 ppm (depending on set conditions and environmental conditions). Detection principle: Semiconductor type Detection sensitivity: Equivalent to 1×10⁻⁶ Pa·m³/s (depending on inspection conditions and measurement environment) Usage: Equipment-integrated type (dedicated for installation in equipment) Resolution: 0.1 ppm Power supply voltage: DC 24 V External dimensions: W 93 × D 91 × H 97 mm

What is a leak test system specifically for small electronic components? It is a device used for leak testing small electronic components that require airtightness, such as crystal devices, ceramic oscillators, optical devices, power semiconductors, CAN devices, laser diodes, MEMS devices, SAW filters, small relays, and capacitors. Leak testing of sealed products requires two types of inspections: gross leak testing and fine leak testing. We offer fully automatic machines that can perform the entire process in one unit, as well as dedicated machines (custom-made) and convenient tabletop types for sampling inspections.

Introducing a "non-destructive testing device as an alternative to the submerged test" for pharmaceutical packaging products. "Complete vial leak testing device | MSQ-2002 series" Fully automating leak tests for various vials, bottles, eye drops, and cylindrical containers. Please check the link below for videos and catalogs.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

● What is a pneumatic regulator? It is a self-developed pneumatic regulator with a control reproducibility of ±0.1%. We offer a wide range of products from low flow to high flow. ● What is a regulator? Please use it to adjust the test pressure for leak testing. By supplying a stable test pressure, it enables more accurate measurements.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● What is a flow meter? Flow meters measure flow rates using mass flow meters or laminar flow meters and perform pass/fail judgments based on flow rate criteria. They are ideal for measuring airflow and conducting performance tests. "FMZ-1063 series" This is a flow tester equipped with a mass flow meter. It offers high precision of ± 3.5 % of R.D. ± 1 digit (in the normal flow range). It features a time-saving function (scan measurement). The FMZ-1063 is a compact, all-in-one flow tester with various functions. "FU series" This is a flow measurement unit that integrates laminar and differential pressure sensors, making it smaller and lighter. When connected to a display indicator (model: MI-170), it can provide direct flow readings as well as pressure and flow judgments. "FLF-110 series" This is a laminar flow meter capable of measuring a wide range of flow rates from 2 NmL/min to 500 NL/min.

This is a pseudo-defect (reference test piece) that specifies the hole diameter and hole length. It can be used in pressure change leakage testing methods and liquid immersion testing methods. It can be utilized for standard setting and validity evaluation using positive controls (defective product samples). ● Evaluation of packaging integrity in accordance with JP18 ● Setting of "maximum allowable leakage limit" ● Testing for the intrusion of water vapor, oxygen, and microorganisms ● Quantification from qualitative testing methods (converting current leakage standards to hole diameter)

"MI-170 series" With RS-232C communication, measurement result output and setting data input/output can be performed. Up to 8 types of condition settings, such as upper and lower limit settings, can be configured. Pressure sensors can be selected from 4 types based on accuracy, gauge pressure, and differential pressure. The mounting size conforms to the DIN96 standard. By combining with the separate type air leak tester LPU-100 series, it can also be used as an air leak tester. "DG-960 series" Pressure sensors can be selected from 4 types based on accuracy, gauge pressure, and differential pressure. The mounting size conforms to the DIN96 standard. "MIZ-0175 series" A new multi-indicator that enhances the functionality of the versatile and high-performance conventional model "MI-170," improving operability and visibility through downsizing and the adoption of an LCD display. It allows a maximum sampling rate of 4000 times per second for stable measurements and is equipped with various correction functions and noise cancellation features, providing a wealth of functionalities.

The inspection targets of the "MSX-7003 series" are relatively large electronic devices. 【Inspection Targets】 - LED - Optical devices - High-frequency devices - Power semiconductors - IR sensors - Gyro sensors - Angular velocity sensors - Electrolytic capacitors, etc. The transport system is designed based on "pallet to pallet" to accommodate various types of work. The following three processes are performed automatically by the airtight inspection device: - Helium bombarding - Gross leak test - Fine leak test For packaged products smaller than 10 mm on each side, the work is set up using pallets or trays, followed by helium bombarding ↓ Then transported to the leak test process through high-speed handling ↓ Going through a continuous process from the gross leak test to the fine leak test ↓ And finally, discharged onto a pallet through high-speed handling. It also supports inline operations (the height of the pass line is 940 mm). Please watch the YouTube video from the link below.

In battery manufacturing lines, if components containing copper are used, there is a possibility that metal powder may mix in, dissolve, ionize, and pass through the separator, causing a malfunction that connects the positive and negative electrodes. Such minute metal powders may not be detected during pre-shipment inspections, and even if they are found, they can lead to various issues, such as the need to increase inspection processes to detect them. Therefore, Fukuda has developed a copper-free (all stainless steel) air leak tester that can be safely used in the production lines of battery manufacturers and secondary battery manufacturing equipment manufacturers. For product specifications and details, please refer to the "Related Product Information" and "Related Catalogs" below.

【Leak testers and leak test-related products provided by Fukuda】 Please take a look at our catalog! ★ Millimeter-wave radar & LiDAR leak tester: The air leak tester "FL-610" for controlling the separate type leak tester air pressure unit "LPU-300." ★ Leak tester for simultaneous measurement of workpieces: Measures two workpieces with one unit. By comparing two at the same time, you can increase the number of operations. ★ Electric air regulator for blood pressure monitor pressure confirmation: Excellent in repeatability of pressure control and pressure adjustment. ★ Leak tester for automotive lighting: Can be tested at low pressure without affecting the workpiece (item under inspection). ★ Air leak tester conversion box/cable: Peripheral equipment for air leak testers. Used when replacing old models with current products or when changing the model of current products. ★ Waterproof inspection testing device: A device for testing the waterproofness (equivalent to IPX7,8) and sealing of sealed products. It can be used for various products such as electronic devices and packaging containers.