Please be sure to check out Fukuda's pinhole!

Pseudo-defects with specified hole diameter and hole length (reference test piece). Please use for leakage testing or evaluation.

This is a pseudo-defect (reference test piece) that specifies hole diameter and hole length. It can be used in pressure change leakage testing methods and liquid immersion testing methods. It can be utilized for standard setting and validity evaluation using positive controls (defective product samples). - Evaluation of packaging integrity in accordance with JP18 - Setting of "maximum allowable leakage limit" - Testing for the intrusion of water vapor, oxygen, and microorganisms - Quantification from qualitative testing methods (converting current leakage standards to hole diameter)

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

This is a fully automated inspection device for pinholes in packaging engineering. It eliminates packaging defects based on certain quality standards. The targets include pillow packaging, pouches, etc.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Example of target work: pillow packaging, pouches, etc. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design allows connection to existing production lines - Quick changeover for product variety switching can be handled in a short time by replacing the chamber - Fully domestically produced, ensuring rapid response for maintenance and troubleshooting *Please consult us regarding the application of this product for pharmaceuticals.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

Compliance with Container Closure Integrity Testing (CCIT)! Fully automated leak testing for pharmaceutical packaging (various vials, bottles, eye drop containers, cylindrical containers, etc.)!

Compliance with Container Closure Integrity Testing (CCIT) for pharmaceutical packaging Fully automated leak testing for various vials, bottles, eye drop containers, and cylindrical containers - GMP validation compliant - Data integrity compliant - CSV Category 3 compliant - Inspection accuracy confirmed by positive controls (Φ10 μm and Φ20 μm) * Conveyor is not included with this product. Specifications are subject to change without notice.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

Reference test piece with specified hole diameter and hole length for leakage testing in corrosion evaluation.

In the plant industry, early detection of damage due to corrosion is crucial for maintaining the safety and efficiency of equipment. In particular, corrosion in sealed systems such as pipes and tanks can lead to leaks and potentially serious accidents. Fukuda pinholes (pseudo-defects/reference test pieces) serve as positive controls in leak testing for corrosion assessment, contributing to standard setting and validity evaluation. This enhances the safety of plant equipment and supports stable operations. 【Usage Scenarios】 - Leak testing due to corrosion in pipes and tanks - Use in pressure change leak testing methods and liquid immersion testing methods - Testing for the intrusion of water vapor, oxygen, and microorganisms 【Effects of Implementation】 - Early detection and countermeasures for leaks due to corrosion - Improvement of equipment safety - Maintenance of stable plant operations

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

For leak testing of pharmaceutical containers. Pseudo-defects/reference test pieces with specified hole diameter and hole length.

In the pharmaceutical industry, complete sealing of containers is essential for maintaining the quality of pharmaceuticals. Particularly in container inspections for vials and eye drop containers, high precision is required to detect even the smallest leaks. Inadequate containers can lead to degradation or contamination of pharmaceuticals, potentially compromising the safety and reliability of the products. Fukuda Pinholes (pseudo-defects/reference test pieces) can be utilized as positive controls (defective product samples) for standard setting and validation in pressure change leak testing and liquid immersion testing. They contribute to the evaluation of packaging integrity in accordance with JP18, the setting of "maximum allowable leak limits," and tests for the intrusion of water vapor, oxygen, and microorganisms, as well as quantification from qualitative testing methods (current leak standards converted to pore sizes). [Usage Scenarios] - Container inspections for vials, syringes, and eye drop containers - Leak testing for PTP packaging - Evaluation of packaging integrity [Effects of Implementation] - Improved quality control through accurate leak testing - Increased efficiency in standard setting and validation - Assurance of product safety and reliability

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

Reduce the risk of foreign matter contamination in food. For leakage testing and evaluation.

In the food industry, it is important to minimize the risk of foreign matter contamination to ensure product safety. There is a possibility that foreign substances can enter through small gaps in packaging containers, which can lead to health hazards for consumers. Fukuda pinholes serve as pseudo-defects to evaluate leaks in packaging containers and reduce the risk of foreign matter contamination. By using them as positive controls, they also assist in standard setting and validation assessments. 【Usage Scenarios】 - Leak testing of food packaging containers - Quality evaluation of packaging materials - Reduction of foreign matter contamination risks 【Effects of Implementation】 - Prevention of complaints and recalls due to foreign matter contamination - Improvement in product quality and reliability - Streamlining of manufacturing processes

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

For the evaluation of joints in medical devices. Pseudo-defects/reference test pieces with specified hole diameter and hole length.

In the medical device industry, evaluating the airtightness of joints is crucial to ensure product safety and reliability. Particularly in medical devices that are implanted in the body or in devices that handle pharmaceutical liquids, leaks at the joints can lead to serious issues. Our Fukuda Pinhole (pseudo-defect/reference test piece) is useful for standard setting and validity assessment in joint leakage testing. By using it as a positive control (defective sample), more accurate evaluations can be achieved. 【Application Scenarios】 - Evaluation of the airtightness of joints in medical devices - Leakage testing of pharmaceutical containers - Assessment of packaging integrity in accordance with JP18 【Benefits of Implementation】 - Reduced risk of joint leakage - Improved product quality - Assurance of compliance with standards

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

Pseudo-defects/reference test specimens to improve the reliability of substrate inspection.

In the electronics industry, it is important to accurately detect minute defects in substrates to ensure product quality and reliability. The quality of the substrate directly affects product performance, necessitating a strict inspection system. Fukuda pinholes (pseudo-defects/reference test specimens) assist in setting standards and validating leak tests in substrate inspections, contributing to improved inspection accuracy. 【Application Scenarios】 - Air-tightness testing of substrates - Quality evaluation of various electronic components - Evaluation of packaging integrity in accordance with JP18 【Benefits of Implementation】 - Streamlining of inspection processes - Improvement in product quality - Prevention of defective products from being released

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

For the structural health assessment of bridges. A pseudo-defect test specimen with specified hole diameter and hole length.

In the bridge industry, non-destructive testing for defect detection is essential to ensure the long-term safety of structures. In particular, small damages caused by corrosion and fatigue can lead to serious accidents if not detected early and addressed appropriately. Fukuda pinholes (pseudo-defects/reference test pieces) contribute to improving the accuracy and reliability of non-destructive testing. By utilizing them as positive controls, it becomes easier to set testing standards and evaluate their validity, thereby enhancing the reliability of test results. 【Usage Scenarios】 - Calibration of testing equipment for crack and corrosion inspections - Validity evaluation of testing methods - Skill assessment of inspectors 【Effects of Implementation】 - Improved accuracy of inspections - Increased reliability of test results - Enhanced safety of structures

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

For wheel leak testing. Pseudo-defect/reference test piece with specified hole diameter and hole length.

In the railway industry, wheel inspections require thorough checks to ensure safety, leaving no small leaks overlooked. It is important to establish appropriate standards for evaluating the airtightness of wheels and to enhance the reliability of inspections. Fukuda pinholes (pseudo-defects/reference test pieces) serve as positive controls and contribute to standard setting and validity assessment. This allows for the improvement of inspection accuracy while ensuring safety. 【Usage Scenarios】 - Setting standards for wheel leak inspections - Performance evaluation of inspection equipment - Inspections during regular maintenance 【Effects of Implementation】 - Improved inspection accuracy - Enhanced safety - Streamlined inspection processes

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

For leak testing of piping. Pseudo-defect/reference test piece with specified hole diameter and hole length.

In the oil and gas industry, the safety of piping and efficient operation are essential. Leaks not only lead to environmental pollution and accidents but also result in economic losses due to operational shutdowns. It is particularly important to detect small leaks early in piping that is prone to corrosion and wear. Fukuda Pinholes (pseudo-defects/reference test pieces) contribute to improving the accuracy and efficiency of leak testing in piping inspections. 【Usage Scenarios】 - Leak testing for pressure changes in piping - Leak inspection through liquid immersion testing - Standard setting using positive controls (defective product samples) 【Effects of Implementation】 - Increased reliability of leak tests - Improved efficiency in standard setting - Enhanced safety

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

For leak testing of welded joints. Pseudo-defects/reference test pieces with specified hole diameter and hole length.

In the automotive industry, the airtightness of welds is crucial. Particularly in areas where leaks are unacceptable, such as engine components and fuel tanks, high quality is required. Leaks due to welding defects can lead to decreased product performance and safety issues. Fukuda pinholes (pseudo-defects/reference test pieces) are used as positive controls in leak testing of welds, contributing to standard setting and validity assessment. 【Application Scenarios】 - Leak testing of welds - Pressure change leak testing method, liquid immersion testing method - Standard setting using positive controls (defective product samples) 【Effects of Implementation】 - Improvement in quality control of welds - Enhanced inspection accuracy - Reduction of defective products

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

Contribute to the standard setting and evaluation of leakage tests in turbine inspections.

In the power generation industry, turbine inspections require early detection of leaks and accurate assessments to ensure safe operation and efficient energy supply. To prevent performance degradation and accidents in turbines, a sophisticated inspection system that does not overlook even the smallest leaks is essential. Fukuda Pinholes (pseudo-defects/reference test pieces) can be utilized for setting standards and validating leak tests, contributing to the reliability of turbine inspections. 【Usage Scenarios】 - Turbine airtightness testing - Leak testing of various components - Standard setting and evaluation 【Effects of Implementation】 - Improved accuracy of leak tests - Reduced inspection time - Enhanced safety

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

Pseudo-defect/reference test piece defining hole diameter and hole length. For leakage testing and evaluation.

In the shipbuilding industry, thickness measurement is crucial for ensuring the safety of structures. Accurate measurements are particularly required for evaluating the quality of welds and detecting thickness reduction due to corrosion. Inadequate measurements can lead to insufficient strength of the structures. Fukuda pinholes (pseudo-defects/reference test pieces) are useful for standard setting and validity assessment in leakage tests. 【Application Scenarios】 - Quality evaluation of welds - Detection of thickness reduction due to corrosion - Use in pressure change leakage testing methods and liquid immersion testing methods 【Effects of Implementation】 - Improved reliability of leakage tests - Increased efficiency in standard setting - Enhanced quality control

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

Pseudo-defect/reference test specimens supporting quality assurance in the aerospace field.

In the aerospace industry, product reliability is the most critical issue in quality assurance. Particularly for components that require high safety and durability, even minor leaks or defects can lead to serious accidents. Fukuda pinholes (pseudo-defects/reference test specimens) support standard setting and validity assessment in addressing such challenges, contributing to the improvement of product quality. We provide solutions that meet the stringent quality standards of the aerospace field, accommodating various testing methods such as pressure change leak testing and liquid immersion testing. [Application Scenarios] - Leak testing of aerospace components - Standard setting in quality management - Evaluation testing in research and development [Effects of Implementation] - Improved product reliability - Increased efficiency in quality management - Enhanced testing accuracy

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

Desktop machine for Container Closure Integrity Testing (CCIT)" "Device for testing the seal integrity of packaging containers

This is a leak testing device to confirm the airtightness of packaging containers. - Achieves improved reliability of formulations - Detects peeling, tearing, and the presence of pinholes in packaging containers, and displays differential pressure, leakage amount, graphs, etc. - Easy operation with a touch panel - Inspection targets: pillow packaging, PTP, three-side or four-side seals (packaged products), plastic bags (e.g., infusion bags), strip packaging (SP packaging), gusset packaging, stick packaging, jar containers, etc. - Usage locations: manufacturing offline, CMC laboratories, quality control testing laboratories, stability testing, etc.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

A sealing integrity testing device for packaging containers that maintains the sterility of pharmaceuticals.

In the pharmaceutical industry, the sterility of packaging containers is extremely important to ensure product quality and safety. Even slight leaks or pinholes in packaging containers can lead to product contamination and have serious effects on patient health. Our packaging container air leak testing equipment quickly and accurately inspects the sealing of packaging containers to ensure sterility. 【Usage Scenarios】 - Offline manufacturing - CMC laboratories - Quality control testing laboratories - Stability testing 【Benefits of Implementation】 - Improved reliability of formulations - Compliance with GMP/validation (IQ, OQ) - Compliance with data integrity (DI) - Adherence to USP<1207>, JIS Z 2332:2012, JP18 reference information (draft)

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

Sealing integrity testing device for packaging containers to maintain the quality of cosmetics.

In the cosmetics industry, the integrity of packaging is crucial for maintaining product quality. In particular, deterioration or leakage of contents not only undermines the value of the product but also leads to a loss of consumer trust. Our packaging container air leak testing equipment detects peeling, tearing, and the presence of pinholes in packaging containers, ensuring product quality. This contributes to enhancing the reliability of cosmetics. 【Usage Scenarios】 - Offline manufacturing - CMC laboratories - Quality control testing laboratories - Stability testing 【Benefits of Implementation】 - Preservation of product quality - Gaining consumer trust - Reduction of complaints and returns

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

Tabletop air leak testing device for inspecting the seal integrity of food packaging containers.

In the food industry, the airtightness of packaging containers is extremely important for maintaining product quality and ensuring safety. The integrity of packaging containers is essential to preserve the flavor and freshness of food and to prevent foreign matter contamination. Poor sealing can lead to product deterioration and potential health risks for consumers. Our packaging container air leak testing equipment detects peeling, tearing, and the presence of pinholes in packaging containers, contributing to the preservation of food quality. 【Application Scenarios】 - Inspection of food packaging containers such as pillow packaging, PTP packaging, and gusset packaging - Inspections in manufacturing offline and quality control laboratories - Testing related to food expiration date labeling 【Benefits of Implementation】 - Improvement in food quality preservation and safety - Cost reduction through the reduction of defective products - Increased reliability from customers

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

In construction work, it is important not only to focus on the building itself but also to create a safe environment for construction vehicles and workers to move around. The Hyper CLT plywood is a lightweight wooden board that utilizes CLT. It can be used as temporary materials to support temporary roads, material delivery routes, heavy machinery work yards, material storage areas, and worker pathways, rather than as structural materials for buildings. The 5×10 board weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, or relocate depending on site conditions. This allows for the boards to be moved in accordance with the progress of the construction, making it easier to effectively utilize limited space. Additionally, the natural texture of the wood blends well with construction sites in residential areas and around public facilities, contributing to considerations for metal noise and summer heat reflection. The Hyper CLT plywood is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system, designated as "TH-250021-A." It can be incorporated into highly public construction projects and exterior and earthworks, promoting the use of new technologies and environmental considerations. Wooden plywood, NETIS, civil engineering, CLT, lightweight wooden boards. A new option for temporary materials using wood is available for construction sites.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.